AN INTERVAL ANALYSIS METHOD FOR WRENCH WORKSPACE DETERMINATION OF PARALLEL MANIPULATOR ARCHITECTURES

2016 ◽  
Vol 40 (2) ◽  
pp. 139-154 ◽  
Author(s):  
Joshua K. Pickard ◽  
Juan A. Carretero
Keyword(s):  
Interval Analysis ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Design Parameters ◽  
End Effector ◽  
Interval Analysis Method ◽  
Reachable Workspace ◽  
Manipulator Design

This paper deals with the wrench workspace (WW) determination of parallel manipulators. The WW is the set of end-effector poses (positions and orientations) for which the active joints are able to balance a set of external wrenches acting at the end-effector. The determination of the WW is important when selecting an appropriate manipulator design since the size and shape of the WW are dependent on the manipulator’s geometry (design) and selected actuators. Algorithms for the determination of the reachable workspace and the WW are presented. The algorithms are applicable to manipulator architectures utilizing actuators with positive and negative limits on the force/torque they can generate, as well as cable-driven parallel manipulator architectures which require nonnegative actuator limits to maintain positive cable tensions. The developed algorithms are demonstrated in case studies applied to a cable-driven parallel manipulator with 2-degrees-of-freedom and three cables and to a 3-RRR parallel manipulator. The approaches used in this paper provide guaranteed results and are based on methods utilizing interval analysis techniques for the representation of end-effector poses and design parameters.

Determination of the Workspace of a Three-Degrees-of-Freedom Parallel Manipulator Using a Three-Dimensional Computer-Aided-Design Software Package and the Concept of Virtual Chains1

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
Andrew Johnson ◽  
Xianwen Kong ◽  
James Ritchie
Keyword(s):  
Computer Aided Design ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Graphical Representation ◽  
Three Dimensional ◽  
Parallel Manipulators ◽  
Workspace Analysis ◽  
Computer Aided ◽  
Aided Design

The determination of workspace is an essential step in the development of parallel manipulators. By extending the virtual-chain (VC) approach to the type synthesis of parallel manipulators, this technical brief proposes a VC approach to the workspace analysis of parallel manipulators. This method is first outlined before being illustrated by the production of a three-dimensional (3D) computer-aided-design (CAD) model of a 3-RPS parallel manipulator and evaluating it for the workspace of the manipulator. Here, R, P and S denote revolute, prismatic and spherical joints respectively. The VC represents the motion capability of moving platform of a manipulator and is shown to be very useful in the production of a graphical representation of the workspace. Using this approach, the link interferences and certain transmission indices can be easily taken into consideration in determining the workspace of a parallel manipulator.

Dynamic Modeling of a Parallel Manipulator With Three Translational Degrees of Freedom

1998 ◽  
Author(s):  
Richard Stamper ◽  
Lung-Wen Tsai
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Close Agreement ◽  
Jacobian Matrix ◽  
Parallel Manipulators ◽  
Kinematic Structure ◽  
End Effector ◽  
Moving Platform ◽  
Euler Approach ◽  
Computationally Intensive

Abstract The dynamics of a parallel manipulator with three translational degrees of freedom are considered. Two models are developed to characterize the dynamics of the manipulator. The first is a traditional Lagrangian based model, and is presented to provide a basis of comparison for the second approach. The second model is based on a simplified Newton-Euler formulation. This method takes advantage of the kinematic structure of this type of parallel manipulator that allows the actuators to be mounted directly on the base. Accordingly, the dynamics of the manipulator is dominated by the mass of the moving platform, end-effector, and payload rather than the mass of the actuators. This paper suggests a new method to approach the dynamics of parallel manipulators that takes advantage of this characteristic. Using this method the forces that define the motion of moving platform are mapped to the actuators using the Jacobian matrix, allowing a simplified Newton-Euler approach to be applied. This second method offers the advantage of characterizing the dynamics of the manipulator nearly as well as the Lagrangian approach while being less computationally intensive. A numerical example is presented to illustrate the close agreement between the two models.

Kinematic Synthesis of a Spatial 3-RPS Parallel Manipulator

2003 ◽  
Vol 125 (1) ◽  
pp. 92-97 ◽  
Author(s):  
Han Sung Kim ◽  
Lung-Wen Tsai
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Point Of View ◽  
Dimensional Synthesis ◽  
Kinematic Synthesis ◽  
End Effector ◽  
Solution Methods ◽  
Moving Platform ◽  
At Will

This paper presents the design of spatial 3-RPS parallel manipulators from dimensional synthesis point of view. Since a spatial 3-RPS manipulator has only 3 degrees of freedom, its end effector cannot be positioned arbitrarily in space. It is shown that at most six positions and orientations of the moving platform can be prescribed at will and, given six prescribed positions, there are at most ten RPS chains that can be used to construct up to 120 manipulators. Further, solution methods for fewer than six prescribed positions are also described.

Forward Problem Singularities of Manipulators Which Become PS-2RS or 2PS-RS Structures When the Actuators Are Locked

2003 ◽  
Author(s):  
Raffaele Di Gregorio
Keyword(s):  
Rigid Body ◽  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Geometric Interpretation ◽  
Forward Problem ◽  
End Effector ◽  
Kinematic Chains ◽  
Position And Orientation ◽  
Manipulator Design

The instantaneous forward problem (IFP) singularities of a parallel manipulator (PM) must be determined during the manipulator design and avoided during the manipulator operation, because they are configurations where the end-effector pose (position and orientation) cannot be controlled by acting on the actuators any longer, and the internal loads of some links become infinite. When the actuators are locked, PMs become structures consisting of one rigid body (platform) connected to another rigid body (base) by means of a number of kinematic chains (limbs). The geometries (singular geometries) of these structures where the platform can perform infinitesimal motion correspond to the IFP singularities of the PMs the structures derive from. This paper studies the singular geometries both of the PS-2RS structure and of the 2PS-RS structure. In particular, the singularity conditions of the two structures will be determined. Moreover, the geometric interpretation of their singularity conditions will be provided. Finally, the use of the obtained results in the design of parallel manipulators which become either PS-2RS or 2PS-RS structures, when the actuators are locked, will be illustrated.

On the optimum design of Stewart platform type parallel manipulators

Robotica ◽  
1995 ◽  
Vol 13 (2) ◽  
pp. 133-140 ◽  
Author(s):  
Soumya Bhattacharya ◽  
H. Hatwal ◽  
A. Ghosh
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Axial Loading ◽  
Parallel Manipulators ◽  
Stewart Platform ◽  
Parallel System ◽  
Design Parameters ◽  
Programming Technique ◽  
Six Degrees Of Freedom ◽  
Static Rigidity

SummaryThis paper studies the static rigidity behaviour of a parallel manipulator with legs modelled as elastic members under axial loading. Structurally, a parallel module is more rigid compared to a serial module and is expected to take heavier payloads. Therefore, a guidance for design of such parallel manipulators is needed which leads to maximum rigidity over the workspace. In the present work, the authors propose the concept of the flexibility ellipsoid for a parallel system. Various scalar measures of rigidity are formulated on the basis of the proposed ellipsoid. An algorithm, involving multiple objective nonlinear programming technique, is implemented to decide upon some important design parameters of a generalised six degrees of freedom Stewart platform type parallel manipulator. It is observed that irrespective of the other parameters, parallel manipulators with the legs pairwise joined at the top platform possess the highest rigidity. Moreover, there exists certain kinematic dimensions for which the designed parallel system is completely free from all sorts of singularity.

scholarly journals Design, Dynamics, and Workspace of a Hybrid-Driven-Based Cable Parallel Manipulator

2013 ◽  
Vol 2013 ◽  
pp. 1-15 ◽  
Author(s):  
Bin Zi ◽  
Jianbin Cao ◽  
Zhencai Zhu ◽  
Peter Mitrouchev
Keyword(s):  
Parallel Manipulator ◽  
High Performance ◽  
Degrees Of Freedom ◽  
High Efficiency ◽  
Parallel Manipulators ◽  
Euler Method ◽  
Heavy Load ◽  
Physical Prototype ◽  
Manipulator Design ◽  
And Control

The design, dynamics, and workspace of a hybrid-driven-based cable parallel manipulator (HDCPM) are presented. The HDCPM is able to perform high efficiency, heavy load, and high-performance motion due to the advantages of both the cable parallel manipulator and the hybrid-driven planar five-bar mechanism. The design is performed according to theories of mechanism structure synthesis for cable parallel manipulators. The dynamic formulation of the HDCPM is established on the basis of Newton-Euler method. The workspace of the manipulator is analyzed additionally. As an example, a completely restrained HDCPM with 3 degrees of freedom is studied in simulation in order to verify the validity of the proposed design, workspace, and dynamic analysis. The simulation results, compared with the theoretical analysis, and the case study previously performed show that the manipulator design is reasonable and the mathematical models are correct, which provides the theoretical basis for future physical prototype and control system design.

A planar quaternion approach to the kinematic synthesis of a parallel manipulator

Robotica ◽  
1997 ◽  
Vol 15 (4) ◽  
pp. 361-365 ◽  
Author(s):  
Andrew P. Murray ◽  
François Pierrot ◽  
Pierre Dauchez ◽  
J. Michael McCarthy
Keyword(s):  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Kinematic Synthesis ◽  
End Effector ◽  
Constraint Manifold ◽  
Planar Parallel Manipulators

In this paper we present a technique for designing planar parallel manipulators with platforms capable of reaching any number of desired poses. The manipulator consists of a platform connected to ground by RPR chains. The set of positions and orientations available to the end-effector of a general RPR chain is mapped into the space of planar quaternions to obtain a quadratic manifold. The coefficients of this constraint manifold are functions of the locations of the base and platform R joints and the distance between them. Evaluating the constraint manifold at each desired pose and defining the limits on the extension of the P joint yields a set of equations. Solutions of these equations determine chains that contain the desired poses as part of their workspaces. Parallel manipulators that can reach the prescribed workspace are assembled from these chains. An example shows the determination of three RPR chains that form a manipulator able to reach a prescribed workspace.

Performance Mapping and Motion Simulation of a 4UPS+PU Redundantly Actuated Parallel Manipulator

2010 ◽  
Author(s):  
Zhen Gao ◽  
Dan Zhang
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Position Control ◽  
Parallel Manipulators ◽  
Inverse Kinematic ◽  
Reachable Workspace ◽  
Redundantly Actuated ◽  
Inverse Kinematic Analysis ◽  
Motion Characteristics ◽  
Operational Capacity

In this paper, a new 4UPS+PU redundantly actuated parallel manipulator is proposed. This mechanism possesses three degrees of freedom (DOF), one translation and two rotations. Different from general parallel manipulators, a passive leg is connected to both centers of the base and the moving platform to constrain the unwanted motion. The mobility study and inverse kinematic analysis are conducted. The reachable workspace is generated with boundary-searching based discretization method. The local and global performance indices including stiffness and dexterity and their atlas are investigated in details. Comprehensive simulation of kinematics, dynamics and proportional-integral-derivative (PID) position control are implemented based on Adams to evaluate and testify the high operational capacity and well motion characteristics.

Kinematics of a Particular 3T1R Parallel Manipulator of Type 2PRPU

2017 ◽  
Author(s):  
Henrique Simas ◽  
Raffaele Di Gregorio
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Industrial Applications ◽  
End Effector ◽  
Serial Robots ◽  
Fixed Direction ◽  
Pick And Place ◽  
Displacement Group ◽  
4 Degrees Of Freedom

Schoenflies-motion generators (SMGs) are 4-degrees-of-freedom (dof) manipulators whose end effector can perform translations along three independent directions, and rotations around one fixed direction (Schoenflies motions). Such motions constitute the 4-dimensional (4-D) Schoenflies subgroup of the 6-D displacement group. The most known SMGs are the serial robots named SCARA. Pick-and-place tasks are typical industrial applications that SMGs can accomplish. In the literature, 3T1R parallel manipulators (PMs) have been also proposed as SMGs. Here, a somehow novel 3T1R PM is presented and studied. Its finite and instantaneous kinematics are analyzed in depth, and analytic and geometric tools that are useful for its design are presented. The proposed SMG has a single-loop not-overconstrained architecture with actuators on or near the base and can make the end effector perform a complete rotation.

Sign in / Sign up

Export Citation Format

Share Document