A leaf area – sapwood area ratio developed to rate loblolly pine tree vigor

1985 ◽  
Vol 15 (6) ◽  
pp. 1181-1184 ◽  
Author(s):  
C. A. Blanche ◽  
J. D. Hodges ◽  
T. E. Nebeker
Keyword(s):  
Leaf Area ◽  
Loblolly Pine ◽  
Dry Weight ◽  
Area Ratio ◽  
Cross Sectional ◽  
Sapwood Area ◽  
Breast Height ◽  
Pine Tree ◽  
Individual Trees ◽  
The Relationship

Stem cross-sectional sapwood area was linearly related to leaf area in loblolly pine. A better relationship was obtained using cross-sectional sapwood area taken at crown base than at breast height. The relationship was affected by time of sampling, with time of maximum needle biomass giving the best correlation. Specific leaf area (area in square centimetres per gram dry weight) was variable, but the mean of 95.32 cm2/g is comparable to reported values for other species. The leaf area – sapwood area ratio at breast height varies only slightly among individual trees so that a mean ratio of 0.29 can be utilized to accurately predict leaf area. The ratio between curent-year or previous-year sapwood production and leaf area (grams per square metre of foliage) was used as an indicator of tree vigor. Tree vigor values varied greatly (21 – 180 g/m2), but were normally distributed within this range.

The influence of thinning and tree size on the sapwood area / leaf area ratio in coigue

2005 ◽  
Vol 35 (7) ◽  
pp. 1679-1685 ◽  
Author(s):  
Pablo A Gajardo-Caviedes ◽  
Miguel A Espinosa ◽  
Urcesino del T González ◽  
Darcy G Ríos
Keyword(s):  
Leaf Area ◽  
Specific Leaf Area ◽  
Regression Models ◽  
Area Ratio ◽  
Destructive Sampling ◽  
Cross Sectional ◽  
Sapwood Area ◽  
Nothofagus Dombeyi ◽  
The Relationship ◽  
Best Fit

The effect of thinning and crown class on the projected leaf area, specific leaf area, and projected leaf area / sapwood area ratio was evaluated in a 48-year-old even-aged stand of coigue (Nothofagus dombeyi (Mirb.) Oerst.). The data were collected through destructive sampling of 27 trees and analyzed with analysis of variance and regression models. The projected leaf area was greater in trees from more intensely thinned stands. The specific leaf area and the projected leaf area / sapwood area ratio did not vary between treatments. The sapwood cross-sectional area at breast height (1.3 m) and at the base of the live crown provided the best fit for the relationship between projected leaf area and sapwood area. The current sapwood area provided the worst fit, suggesting that at an early age, coigue sapwood does not present permeability problems associated with tyloses.

Allometric models for the estimation of leaf area and dry weight from sapwood and heartwood area in black locust (R. pseudacacia)

2021 ◽  
Author(s):  
Stamatios Rafail Tziaferidis ◽  
Gavriil Spyroglou ◽  
Mariangela Fotelli ◽  
Kalliopi Radoglou
Keyword(s):  
Leaf Area ◽  
Vascular System ◽  
Black Locust ◽  
Dry Weight ◽  
Cross Sectional ◽  
Sapwood Area ◽  
Allometric Models ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Pipe Model

<p>Allometric equations relating a tree’s vascular system with its leaf area and dry weight are developed for numerous forest species, in order to link their hydraulic architecture to carbon and biomass allocation. In 1964, Shinozaki <em>et al.</em> published the Pipe Model Theory (PMT) according to which, a given amount of leaves is supported by and is directly proportional to the area of the conductive tissue of the trunk. The present study aimed at testing whether PMT applies for <em>R. pseudacacia</em> plantations established for restoration and carbon sequestration purposes. A total of 25 trees of black locust grown at the restored former open-cast mining areas of the lignite center of the Hellenic Public Power Corporation (HPPC) in Ptolemaida and Aminteo, NW Greece, were destructively sampled. For each tree we determined its leaf area, foliage dry weight, diameter at breast height, as well as the cross-sectional areas of the trunk, the sapwood and the current sapwood at the stump height (0.30m), the breast height (1.3m), in the middle of the stem, at the base of live crown, at 1/3 and 2/3 of the length of the crown. The relationships of leaf area and foliage dry weight with the different cross-sectional areas at the selected stem heights were tested with simple and multiple linear regression models at p<0.001.</p><p>Among all tested relationships, PMT was more strongly verified by the linear relationship estimating both leaf area and foliage dry weight by the total cross-sectional area at the middle of the stem (R<sup>2</sup>=0.81). Sapwood area was found to be a less strong estimator of leaf area and foliage dry weight. The best relationships between sapwood area and leaf area / foliage were established when measured at the 1/3 of the length of the crown (R<sup>2</sup>=0.70 and 0.77, for leaf area and dry weight, respectively). The widely used relationship of sapwood at breast height to both leaf area and weight was less strong in our study (R<sup>2</sup>=0.66 and 0.68, for leaf area and dry weight, respectively). Furthermore, our results were not consistent with the theory of Shinozaki et al. (1964) that the ratio of leaf area to sapwood area increases from the top of the tree to the base of crown, where it is stabilized until breast height. These deviations may be due to the age of the studied plantations which does not exceed 30 years and the properties of the growth substrate consisting mainly of depositions from the extraction of lignite. The strongest allometric models for the estimation of leaf area and weight by tree diameter were built at breast height (R<sup>2</sup>=0.72) and at the base of live crown (R<sup>2</sup>=0.73), respectively. In addition, the trees’ diameter at the base of live crown could be reliably estimated by their diameter at breast height (R<sup>2</sup>=0.78). Our results were only partly consistent with the PMT. However, the established relationships may be useful for modelling and assessment of carbon allocation, water balance and growth of black locust plantations in restoration sites.</p>

scholarly journals Carambola Growth and Leaf Gas-exchange Responses to Seismic or Wind Stress

HortScience ◽  
1992 ◽  
Vol 27 (8) ◽  
pp. 913-915 ◽  
Author(s):  
Thomas E. Marler ◽  
Yasmina Zozor
Keyword(s):  
Growth Rate ◽  
Gas Exchange ◽  
Leaf Area ◽  
Leaf Gas Exchange ◽  
Dry Weight ◽  
Area Ratio ◽  
Sectional Area ◽  
Cross Sectional ◽  
Relative Growth ◽  
Seismic Stress

Growth and leaf gas-exchange responses of carambola (Averrhoa carambola L.) seedlings to wind or seismic stress were studied under glasshouse conditions. Forty days of twice daily seismic stress applied for 10 seconds consistently reduced carambola height, leaf area, dry weight, relative growth rate, and leaf-area ratio, but increased trunk cross-sectional area compared with plants receiving no seismic stress. Fifty-one days of wind load reduced plant height, leaf area, dry weight, trunk cross-sectional area, net assimilation rate, relative growth rate, leaf-area ratio, and stomatal conductance compared with plants receiving no wind stress. Morphological appearance was similar for plants receiving wind or seismic stress. Net CO2 assimilation of carambola leaflets was reduced by 30 minutes of wind load for up to 6 hours following the stress. Results suggest that wind may reduce carambola growth at least partially by influencing leaf gas exchange or by the mechanical stress associated with wind.

scholarly journals Sapwood area – leaf area relationships for coast redwood

2005 ◽  
Vol 35 (5) ◽  
pp. 1250-1255 ◽  
Author(s):  
Petru Tudor Stancioiu ◽  
Kevin L O'Hara
Keyword(s):  
Leaf Area ◽  
Sequoia Sempervirens ◽  
Sectional Area ◽  
Cross Sectional ◽  
Sapwood Area ◽  
Coast Redwood ◽  
Breast Height ◽  
Area Sampling ◽  
Strong Linear Relationship ◽  
Taper Model

Coast redwood (Sequoia sempervirens (D. Don) Endl.) trees in different canopy strata and crown positions were sampled to develop relationships between sapwood cross-sectional area and projected leaf area. Sampling occurred during the summers of 2000 and 2001 and covered tree heights ranging from 7.7 to 45.2 m and diameters at breast height ranging from 9.4 to 92.7 cm. Foliage morphology varied greatly and was stratified into five types based on needle type (sun or shade) and twig color. A strong linear relationship existed between projected leaf area and sapwood area at breast height or sapwood at the base of the live crown despite the variability in foliage morphology. Ratios of leaf area to sapwood were 0.40 m2/cm2 at breast height and 0.57 m2/cm2 at crown base. Measurements of sapwood at the base of the live crown improved leaf area predictions because of sapwood taper below the crown base. A sapwood taper model was also developed.

The relationship between tree height and leaf area: sapwood area ratio

Oecologia ◽  
2002 ◽  
Vol 132 (1) ◽  
pp. 12-20 ◽  
Author(s):  
N. McDowell ◽  
H. Barnard ◽  
B. Bond ◽  
T. Hinckley ◽  
R. Hubbard ◽  
...  
Keyword(s):  
Leaf Area ◽  
Tree Height ◽  
Area Ratio ◽  
Sapwood Area ◽  
The Relationship

Leaf area – sapwood area relationships in adjacent young Douglas-fir stands with different early growth rates

1987 ◽  
Vol 17 (2) ◽  
pp. 174-180 ◽  
Author(s):  
M. A. Espinosa Bancalari ◽  
D. A. Perry ◽  
John D. Marshall
Keyword(s):  
Leaf Area ◽  
Growth Rates ◽  
Ring Width ◽  
Basal Area ◽  
Early Growth ◽  
Douglas Fir ◽  
Sapwood Area ◽  
Breast Height ◽  
Pipe Model ◽  
The Relationship

The relationship between foliage area and sapwood basal area was studied in three adjacent 22-year-old Douglas-fir (Pseudotsugamenziesii (Mirb.) Franco) stands that differed in early growth rates. Sapwood width was fairly constant for most of the stem above the stump, but the number of annual rings in the sapwood decreased gradually with height. Sapwood area also decreased with increasing height in the tree, the stands differing significantly only at breast height. The proportion of heartwood from stump to near the base of the crown was significantly higher for the stand of fastest early growth. Ratios of leaf area to sapwood area were significantly higher for that stand and varied in every stem section, the ratio lower at breast height than at the base of the live crown. At the base of the crown, the ratio of leaf area to sapwood area was 1.33 and 1.57 times greater in the fast-growing stand than in the intermediate- and slow-growing stands, respectively. Leaf area was as closely related to dbh as to sapwood area at breast height. Sapwood area at the crown base was more accurate than sapwood area at breast height for predicting leaf area in the fast stand and was equally accurate in the other two stands. Ratios of leaf area to sapwood area correlated positively with sapwood ring width. However, because sapwood ring width also correlated closely with sapwood area, it did not improve predictive equations. The results suggest that the "pipe model" theory must be modified to account for the internal structure of the "pipe" and that caution should be exercised when using published leaf area to sapwood area ratios.

Phenyl indole-3-thiolobutyrate increases growth of transplanted 1-0 red oak

1988 ◽  
Vol 18 (1) ◽  
pp. 131-134
Author(s):  
Daniel K. Struve ◽  
W. Timothy Rhodus
Keyword(s):  
Leaf Area ◽  
Butyric Acid ◽  
Dry Weight ◽  
Area Ratio ◽  
Leaf Area Ratio ◽  
Red Oak ◽  
Relative Growth ◽  
Auxin Treatment ◽  
Net Assimilation

The basal 1 cm of taproot of dormant bareroot 1-0 red oak (Quercusrubra L.) seedlings were given a 3-s dip in 20, 40, or 80 mM concentrations of indole-3-butyric acid (IBA), phenyl indole-3-thiolobutyrate (P-ITB), or equal parts IBA and P-ITB at 20 or 40 mM concentrations. Sixty control seedlings were dipped in 95% ethanol, while 30 seedlings were used for each auxin treatment. Seedlings were potted on May 12, 1986, and grown outdoors. At the end of the 104-day study period, all concentrations of IBA and P-ITB significantly increased number of roots regenerated (from 5.3 with 20 mM IBA to 11.9 for 80 mM IBA) compared with control seedlings. However, P-ITB-treated seedlings produced significantly more leaves (20–24) and leaf area (320–472 cm2), and up to 10 g more dry weight than IBA and non-auxin-treated seedlings. P-ITB treated seedlings had higher relative growth and net assimilation rates and lower leaf area ratio than IBA-treated or control seedlings. Seedlings treated with 20 mM of equal parts IBA and P-ITB were similar to P-ITB-treated seedlings while seedlings treated with the 40 mM IBA and P-ITB combination were similar to IBA-treated seedlings.

Leaf area – sapwood cross-sectional area relationships in repressed stands of lodgepole pine

1987 ◽  
Vol 17 (3) ◽  
pp. 205-209 ◽  
Author(s):  
M. G. Keane ◽  
G. F. Weetman
Keyword(s):  
Hydraulic Conductivity ◽  
Leaf Area ◽  
Wood Density ◽  
Lodgepole Pine ◽  
Cross Sectional Area ◽  
Sectional Area ◽  
Cross Sectional ◽  
Density Profiles ◽  
Individual Tree ◽  
Individual Trees

To better understand the phenomenon of growth "stagnation" in high-density lodgepole pine (Pinuscontorta Dougl. ex Loud.), leaf area and its relationship with sapwood cross-sectional area were examined on both an individual tree and stand basis. Leaf areas of individual trees in a 22-year-old stand varied from 30.8 m2 (dominants in stands of low stocking) to 0.05 m2 (suppressed trees in stands of high stocking). Leaf area indices ranged from 13.4 to 2.3 m2 m−2 between low and high stocking levels, respectively. Over the same stocking range, the ratio of leaf area to sapwood cross-sectional area was reduced from 0.3 to 0.15 m2 cm−2. Intraring wood density profiles showed that ovendry density increased from 0.52 to 0.7 g cm−3 and the proportion of early wood decreased over a stocking level range of 6500–109 000 trees/ha. A reduction in hydraulic conductivity in the stems of stagnant trees, suggested by the greater proportion of narrow-diameter tracheids present, may lead to a greater resistance to water transport within the boles of trees from stagnant stands, leading to low leaf areas.

scholarly journals Fitness Cost of Imazamox Resistance in Wild Poinsettia (Euphorbia heterophylla L.)

Agronomy ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1859
Author(s):  
Saeid Hassanpour-bourkheili ◽  
Mahtab Heravi ◽  
Javid Gherekhloo ◽  
Ricardo Alcántara-de la Cruz ◽  
Rafael De Prado
Keyword(s):  
Growth Rate ◽  
Leaf Area ◽  
Specific Leaf Area ◽  
Dry Weight ◽  
Area Ratio ◽  
Fitness Cost ◽  
Seed Plant ◽  
Growth Indices ◽  
Relative Growth ◽  
Net Assimilation

Wild poinsettia (Euphorbia heterophylla L.) is a difficult-to-control weed in soybean production in Brazil that has developed resistance to herbicides, including acetolactate synthase inhibitors. We investigated the potential fitness cost associated to the Ser-653-Asn mutation that confers imazamox resistance in this weed. Plant height, leaf and stem dry weight, leaf area and seed production per plant as well as the growth indices of specific leaf area, leaf area ratio, relative growth rate and net assimilation in F2 homozygous resistant (R) and susceptible (S) wild poinsettia progenies were pairwise compared. S plants were superior in most of the traits studied. Plant heights for S and R biotypes, recorded at 95 days after planting (DAP), were 137 and 120 cm, respectively. Leaf areas were 742 and 1048 cm2 in the R and S biotypes, respectively. The dry weights of leaves and stems in the S plants were 30 and 35%, respectively, higher than in the R plants. In both biotypes, the leaves had a greater share in dry weight at early development stages, but from 50 DAP, the stem became the main contributor to the dry weight of the shoots. The R biotype produced 110 ± 4 seed plant−1, i.e., 12 ± 3% less seeds per plant than that of the S one (125 ± 7 seed plant−1). The growth indices leaf area ratio and specific leaf area were generally higher in the S biotype or similar between both biotypes; while the relative growth rate and net assimilation rate were punctually superior in the R biotype. These results demonstrate that the Ser-653-Asn mutation imposed a fitness cost in imazamox R wild poinsettia.

Sign in / Sign up

Export Citation Format

Share Document