scholarly journals Sapwood area – leaf area relationships for coast redwood

2005 ◽  
Vol 35 (5) ◽  
pp. 1250-1255 ◽  
Author(s):  
Petru Tudor Stancioiu ◽  
Kevin L O'Hara
Keyword(s):  
Leaf Area ◽  
Sequoia Sempervirens ◽  
Sectional Area ◽  
Cross Sectional ◽  
Sapwood Area ◽  
Coast Redwood ◽  
Breast Height ◽  
Area Sampling ◽  
Strong Linear Relationship ◽  
Taper Model

Coast redwood (Sequoia sempervirens (D. Don) Endl.) trees in different canopy strata and crown positions were sampled to develop relationships between sapwood cross-sectional area and projected leaf area. Sampling occurred during the summers of 2000 and 2001 and covered tree heights ranging from 7.7 to 45.2 m and diameters at breast height ranging from 9.4 to 92.7 cm. Foliage morphology varied greatly and was stratified into five types based on needle type (sun or shade) and twig color. A strong linear relationship existed between projected leaf area and sapwood area at breast height or sapwood at the base of the live crown despite the variability in foliage morphology. Ratios of leaf area to sapwood were 0.40 m2/cm2 at breast height and 0.57 m2/cm2 at crown base. Measurements of sapwood at the base of the live crown improved leaf area predictions because of sapwood taper below the crown base. A sapwood taper model was also developed.

Estimating leaf area of Abieslasiocarpa across ranges of stand density and site quality

1989 ◽  
Vol 19 (7) ◽  
pp. 930-932 ◽  
Author(s):  
James N. Long ◽  
Frederick W. Smith
Keyword(s):  
Leaf Area ◽  
Species Differences ◽  
Stand Density ◽  
Cross Sectional Area ◽  
Site Quality ◽  
Sectional Area ◽  
Cross Sectional ◽  
Breast Height ◽  
Unbiased Estimates ◽  
Stand Conditions

For a given species, differences in the relation between leaf area and sapwood cross-sectional area at breast height have been attributed to the effects of varying stand density and site quality. When leaf area of Abieslasiocarpa (Hook.) Nutt. is estimated as a function of sapwood cross-sectional area at breast height and distance from breast height to the midpoint of the crown, the apparent effects of stand density and site quality are eliminated. A comparison of these results with those for Pinuscontorta Dougl. suggests this model form should provide unbiased estimates of leaf area for a variety of species and stand conditions.

Influence of fertilization on the allometric relations for two pines in contrasting environments

1993 ◽  
Vol 23 (8) ◽  
pp. 1704-1711 ◽  
Author(s):  
Stith T. Gower ◽  
Brent E. Haynes ◽  
Karin S. Fassnacht ◽  
Steve W. Running ◽  
E. Raymond Hunt Jr.
Keyword(s):  
Leaf Area ◽  
Ponderosa Pine ◽  
Cross Sectional Area ◽  
Red Pine ◽  
Stem Diameter ◽  
Sectional Area ◽  
Cross Sectional ◽  
Breast Height ◽  
Allometric Relations ◽  
And Control

The objective of this study was to examine the effect of fertilization on the allometric relations for red pine (Pinusresinosa Ait.) and ponderosa pine (Pinusponderosa Dougl. ex Laws.) growing in contrasting climates. After 2 years of treatment, fertilization did not significantly affect the allometric relations between stem or branch mass and stem diameter for either species. For a similar-diameter tree, current foliage mass and area and new twig mass were significantly greater for fertilized than for control red pine and ponderosa pine. The significant increase in new foliage mass and area occurred in the upper and middle canopy for red pine and middle and lower canopy for ponderosa pine. For a similar-diameter tree, projected (one-sided) leaf area and total foliage mass were significantly greater for fertilized than for control red pine. However, leaf area and total foliage mass did not differ between similar-diameter fertilized and control ponderosa pine because fertilization decreased leaf longevity. The ratios of leaf area/sapwood cross-sectional area measured at breast height (1.37 m) were 0.14 and 0.11 for control plus fertilized red pine and ponderosa pine, respectively, and were greater (but not significantly) for fertilized than for control trees, while the ratios of leaf area/sapwood cross-sectional area measured at the base of live crown were significantly greater for fertilized than for control red pine and ponderosa pine.

Allometric models for the estimation of leaf area and dry weight from sapwood and heartwood area in black locust (R. pseudacacia)

2021 ◽  
Author(s):  
Stamatios Rafail Tziaferidis ◽  
Gavriil Spyroglou ◽  
Mariangela Fotelli ◽  
Kalliopi Radoglou
Keyword(s):  
Leaf Area ◽  
Vascular System ◽  
Black Locust ◽  
Dry Weight ◽  
Cross Sectional ◽  
Sapwood Area ◽  
Allometric Models ◽  
Diameter At Breast Height ◽  
Breast Height ◽  
Pipe Model

<p>Allometric equations relating a tree’s vascular system with its leaf area and dry weight are developed for numerous forest species, in order to link their hydraulic architecture to carbon and biomass allocation. In 1964, Shinozaki <em>et al.</em> published the Pipe Model Theory (PMT) according to which, a given amount of leaves is supported by and is directly proportional to the area of the conductive tissue of the trunk. The present study aimed at testing whether PMT applies for <em>R. pseudacacia</em> plantations established for restoration and carbon sequestration purposes. A total of 25 trees of black locust grown at the restored former open-cast mining areas of the lignite center of the Hellenic Public Power Corporation (HPPC) in Ptolemaida and Aminteo, NW Greece, were destructively sampled. For each tree we determined its leaf area, foliage dry weight, diameter at breast height, as well as the cross-sectional areas of the trunk, the sapwood and the current sapwood at the stump height (0.30m), the breast height (1.3m), in the middle of the stem, at the base of live crown, at 1/3 and 2/3 of the length of the crown. The relationships of leaf area and foliage dry weight with the different cross-sectional areas at the selected stem heights were tested with simple and multiple linear regression models at p<0.001.</p><p>Among all tested relationships, PMT was more strongly verified by the linear relationship estimating both leaf area and foliage dry weight by the total cross-sectional area at the middle of the stem (R<sup>2</sup>=0.81). Sapwood area was found to be a less strong estimator of leaf area and foliage dry weight. The best relationships between sapwood area and leaf area / foliage were established when measured at the 1/3 of the length of the crown (R<sup>2</sup>=0.70 and 0.77, for leaf area and dry weight, respectively). The widely used relationship of sapwood at breast height to both leaf area and weight was less strong in our study (R<sup>2</sup>=0.66 and 0.68, for leaf area and dry weight, respectively). Furthermore, our results were not consistent with the theory of Shinozaki et al. (1964) that the ratio of leaf area to sapwood area increases from the top of the tree to the base of crown, where it is stabilized until breast height. These deviations may be due to the age of the studied plantations which does not exceed 30 years and the properties of the growth substrate consisting mainly of depositions from the extraction of lignite. The strongest allometric models for the estimation of leaf area and weight by tree diameter were built at breast height (R<sup>2</sup>=0.72) and at the base of live crown (R<sup>2</sup>=0.73), respectively. In addition, the trees’ diameter at the base of live crown could be reliably estimated by their diameter at breast height (R<sup>2</sup>=0.78). Our results were only partly consistent with the PMT. However, the established relationships may be useful for modelling and assessment of carbon allocation, water balance and growth of black locust plantations in restoration sites.</p>

A leaf area – sapwood area ratio developed to rate loblolly pine tree vigor

1985 ◽  
Vol 15 (6) ◽  
pp. 1181-1184 ◽  
Author(s):  
C. A. Blanche ◽  
J. D. Hodges ◽  
T. E. Nebeker
Keyword(s):  
Leaf Area ◽  
Loblolly Pine ◽  
Dry Weight ◽  
Area Ratio ◽  
Cross Sectional ◽  
Sapwood Area ◽  
Breast Height ◽  
Pine Tree ◽  
Individual Trees ◽  
The Relationship

Stem cross-sectional sapwood area was linearly related to leaf area in loblolly pine. A better relationship was obtained using cross-sectional sapwood area taken at crown base than at breast height. The relationship was affected by time of sampling, with time of maximum needle biomass giving the best correlation. Specific leaf area (area in square centimetres per gram dry weight) was variable, but the mean of 95.32 cm2/g is comparable to reported values for other species. The leaf area – sapwood area ratio at breast height varies only slightly among individual trees so that a mean ratio of 0.29 can be utilized to accurately predict leaf area. The ratio between curent-year or previous-year sapwood production and leaf area (grams per square metre of foliage) was used as an indicator of tree vigor. Tree vigor values varied greatly (21 – 180 g/m2), but were normally distributed within this range.

Application of the pipe model theory to predict canopy leaf area

1982 ◽  
Vol 12 (3) ◽  
pp. 556-560 ◽  
Author(s):  
R. H. Waring ◽  
P. E. Schroeder ◽  
R. Oren
Keyword(s):  
Leaf Area ◽  
Model Theory ◽  
Large Fraction ◽  
Cross Sectional Area ◽  
Unit Weight ◽  
Sectional Area ◽  
Cross Sectional ◽  
Sapwood Area ◽  
Pipe Model ◽  
Pipe Model Theory

The pipe model theory presents the idea that a unit weight of tree foliage is serviced by a specific cross-sectional area of conducting sapwood in the crown. Below the crown, a large fraction of the tree bole may be nonconducting tissue, so the sapwood area would have to be known to estimate foliage. We applied the pipe model theory to the analysis of several western coniferous species to learn whether the distribution of canopy leaf area could be accurately estimated from knowledge of the sapwood cross-sectional area at various heights, including breast height (1.37 m). Results are excellent, but taper in the conducting area must be considered when sapwood area is measured below the crown.

scholarly journals Influence of Irrigation Regime on Water Relations, Gas Exchange, and Growth of Two Field-grown Redbud Varieties in a Semiarid Climate

2014 ◽  
Vol 32 (1) ◽  
pp. 8-12 ◽  
Author(s):  
Lindsey Fox ◽  
Amber Bates ◽  
Thayne Montague
Keyword(s):  
Stomatal Conductance ◽  
Gas Exchange ◽  
Water Potential ◽  
Leaf Area ◽  
Shoot Elongation ◽  
Sectional Area ◽  
Irrigation Regime ◽  
Cross Sectional ◽  
Area Increase ◽  
Irrigation Volume

For three growing seasons (2003–2005) two newly planted, field-grown redbud (Cercis canadensis L.) varieties were subjected to three reference evapotranspiration (ETo)-based irrigation regimes (100, 66, and 33% ETo). Over this time period, water relations (pre-dawn leaf water potential), gas exchange (mid-day stomatal conductance), and growth data (trunk cross sectional area increase, tree leaf area, and shoot elongation) were measured. Pre-dawn leaf water potential (ψl) was more negative for trees receiving the least amount of irrigation, and for Mexican redbud [C. canadensis var. mexicana (Rose) M. Hopkins] trees. However, mid-day stomatal conductance (gs) was similar for Texas redbud (C. canadensis var. texensis S. Watson) trees across the three irrigation regimes, and was highest for Mexican redbud trees receiving the greatest amount of irrigation volume. Growth varied by variety and irrigation regime. Trunk cross sectional area increase was greatest for Mexican redbud trees, leaf area was highest for trees receiving the greatest amount of irrigation, and shoot elongation was greatest for trees receiving the 66% ETo irrigation regime. However, despite differing irrigation volumes, greatest gas exchange and growth was not necessarily associated with greatest irrigation volume. When considering conservation of precious water resources, these redbud varieties maintain adequate growth and appearance under reduced irrigation.

Leaf area – sapwood cross-sectional area relationships in repressed stands of lodgepole pine

1987 ◽  
Vol 17 (3) ◽  
pp. 205-209 ◽  
Author(s):  
M. G. Keane ◽  
G. F. Weetman
Keyword(s):  
Hydraulic Conductivity ◽  
Leaf Area ◽  
Wood Density ◽  
Lodgepole Pine ◽  
Cross Sectional Area ◽  
Sectional Area ◽  
Cross Sectional ◽  
Density Profiles ◽  
Individual Tree ◽  
Individual Trees

To better understand the phenomenon of growth "stagnation" in high-density lodgepole pine (Pinuscontorta Dougl. ex Loud.), leaf area and its relationship with sapwood cross-sectional area were examined on both an individual tree and stand basis. Leaf areas of individual trees in a 22-year-old stand varied from 30.8 m2 (dominants in stands of low stocking) to 0.05 m2 (suppressed trees in stands of high stocking). Leaf area indices ranged from 13.4 to 2.3 m2 m−2 between low and high stocking levels, respectively. Over the same stocking range, the ratio of leaf area to sapwood cross-sectional area was reduced from 0.3 to 0.15 m2 cm−2. Intraring wood density profiles showed that ovendry density increased from 0.52 to 0.7 g cm−3 and the proportion of early wood decreased over a stocking level range of 6500–109 000 trees/ha. A reduction in hydraulic conductivity in the stems of stagnant trees, suggested by the greater proportion of narrow-diameter tracheids present, may lead to a greater resistance to water transport within the boles of trees from stagnant stands, leading to low leaf areas.

scholarly journals The assessment sectional area of stem wood and stocks in experimental trees reclamation Western Donbass plot № 1

2016 ◽  
Vol 45 ◽  
pp. 76-81
Author(s):  
V. M. Zverkovsky ◽  
O. S. Zubkova
Keyword(s):  
Cross Sections ◽  
Linear Growth ◽  
Cross Sectional Area ◽  
Forest Plantations ◽  
Sectional Area ◽  
Cross Sectional ◽  
Stem Wood ◽  
Diameter At Breast Height ◽  
Breast Height

The linear growth of forest plantations of Western Donbass’ recultivating plot №1 were studied. The established cross-sectional the area of trunks and timber reserves experimental trees.Characterized by parameters which are the volume of wood: its height, diameter at breast height and shape of the forming barrel. In diameter at breast height cross sectional area is determined and then the barrel volume is calculated. Cross sections of tree trunks are shaped like a circle or an ellipse. Knowing the volume of logs we calculated reserves of wood for trees experimental plots.The largest reserves of timber and cross-sectional area characterized planting U. pumila – 15,367 m3 and 1,9583 m2, A. platanoides – 13,328 m3 and 2,67 m2, Q. robur – 10,120 m3 and 1,452 m2, J. virginiana – 8,748 m3 and 2,106 m2. The least plantation stocks of wood characterized E. angustifolia – 1,3699 m3 and 0,3693 m2, R. pseudoacacia – 2,9478 m3 and 0,8350 m2, P. rallasiana – 3,1626 m3 and 0,3279 m2.

scholarly journals RELATIONSHIPS OF LEAF AREA AND TRUNK DIAMETER OF APPLE TREES AFFECTED BY ROOTSTOCK AN D CULTIVAR

HortScience ◽  
1992 ◽  
Vol 27 (11) ◽  
pp. 1169c-1169
Author(s):  
Curt R. Rom ◽  
Renae E. Moran
Keyword(s):  
Leaf Area ◽  
Cross Sectional Area ◽  
Sectional Area ◽  
Mature Trees ◽  
Apple Trees ◽  
Cross Sectional ◽  
Trunk Diameter ◽  
Yield Efficiency ◽  
Linear Relationships ◽  
Old Trees

Trunk cross-sectional area (TCA) has been used to estimate leaf area (LA) and yield efficiency but variation in LA and TCA relationships have been unexplored. LA and TCA of 10-yr-old 'Starkspur Supreme Delicious' on 9 rootstocks (STKs) were measured in 1989. LA and TCA of 2-yr-old trees of 3 cultivars (CVs) on 5 STKs were measured in 1991. Regression of LA and TCA was performed for each CV, STK and each CV/STK. On mature trees, LA varied significantly with STK. The number and LA of shoot leaves (LVS) and spur LVS varied with STK but the % of total was not significantly different (approx. 52% spur LVS). The relationships of LA and TCA were linear for mature (r2=.94) and young (r2=.44) trees. On young trees, TCA varied with CV, but LA did not. Both LA and TCA were significantly different among STKs. The linear relationships of LA and TCA had unique intercepts with each CV, STK and CV/STK combination but slopes were not significantly different. Leaf area of Jonagold' and 'Gala' tended to increase more with increasing TCA than 'Empire'.

scholarly journals The assessment sectional area of stem wood and stocks in experimental trees reclamation Western Donbass plot № 1

2016 ◽  
Vol 45 ◽  
pp. 76-81
Author(s):  
V. M. Zverkovsky ◽  
O. S. Zubkova
Keyword(s):  
Cross Sections ◽  
Linear Growth ◽  
Cross Sectional Area ◽  
Forest Plantations ◽  
Sectional Area ◽  
Cross Sectional ◽  
Stem Wood ◽  
Diameter At Breast Height ◽  
Breast Height

The linear growth of forest plantations of Western Donbass’ recultivating plot №1 were studied. The established cross-sectional the area of trunks and timber reserves experimental trees.Characterized by parameters which are the volume of wood: its height, diameter at breast height and shape of the forming barrel. In diameter at breast height cross sectional area is determined and then the barrel volume is calculated. Cross sections of tree trunks are shaped like a circle or an ellipse. Knowing the volume of logs we calculated reserves of wood for trees experimental plots.The largest reserves of timber and cross-sectional area characterized planting U. pumila – 15,367 m3 and 1,9583 m2, A. platanoides – 13,328 m3 and 2,67 m2, Q. robur – 10,120 m3 and 1,452 m2, J. virginiana – 8,748 m3 and 2,106 m2. The least plantation stocks of wood characterized E. angustifolia – 1,3699 m3 and 0,3693 m2, R. pseudoacacia – 2,9478 m3 and 0,8350 m2, P. rallasiana – 3,1626 m3 and 0,3279 m2.

Sign in / Sign up

Export Citation Format

Share Document