Entropy generation and heat transfer analysis of magnetic hybrid nanofluid inside a square cavity with thermal radiation

2021 ◽  
Vol 136 (1) ◽  
Author(s):  
P. Sudarsana Reddy ◽  
P. Sreedevi
Keyword(s):  
Heat Transfer ◽  
Thermal Radiation ◽  
Entropy Generation ◽  
Heat Transfer Analysis ◽  
Hybrid Nanofluid ◽  
Square Cavity

MHD and nonlinear thermal radiation effects on hybrid nanofluid past a wedge with heat source and entropy generation

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Fazle Mabood ◽  
Anum Shafiq ◽  
Waqar Ahmed Khan ◽  
Irfan Anjum Badruddin
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Heat Source ◽  
Thermal Radiation ◽  
Entropy Generation ◽  
Entropy Generation Rate ◽  
Design Parameters ◽  
Hybrid Nanofluid ◽  
Nonlinear Thermal Radiation ◽  
Content Type

Purpose This study aims to investigate the irreversibility associated with the Fe3O4–Co/kerosene hybrid-nanofluid past a wedge with nonlinear radiation and heat source. Design/methodology/approach This study reports the numerical analysis of the hybrid nanofluid model under the implications of the heat source and magnetic field over a static and moving wedge with slips. The second law of thermodynamics is applied with nonlinear thermal radiation. The system that comprises differential equations of partial derivatives is remodeled into the system of differential equations via similarity transformations and then solved through the Runge–Kutta–Fehlberg with shooting technique. The physical parameters, which emerges from the derived system, are discussed in graphical formats. Excellent proficiency in the numerical process is analyzed by comparing the results with available literature in limiting scenarios. Findings The significant outcomes of the current investigation are that the velocity field uplifts for higher velocity slip and magnetic strength. Further, the heat transfer rate is reduced with the incremental values of the Eckert number, while it uplifts with thermal slip and radiation parameters. An increase in Brinkmann’s number uplifts the entropy generation rate, while that peters out the Bejan number. The results of this study are of importance involving in the assessment of the effect of some important design parameters on heat transfer and, consequently, on the optimization of industrial processes. Originality/value This study is original work that reports the hybrid nanofluid model of Fe3O4–Co/kerosene.

MHD flow and heat transfer of hybrid nanofluid over a permeable moving surface in the presence of thermal radiation

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Nurul Amira Zainal ◽  
Roslinda Nazar ◽  
Kohilavani Naganthran ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Stability Analysis ◽  
Thermal Radiation ◽  
Mhd Flow ◽  
Heat Transfer Analysis ◽  
Problem Solver ◽  
Hybrid Nanofluid ◽  
Moving Surface ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose This paper aims to investigate the flow and heat transfer characteristics of a hybrid nanofluid (Cu-Al2O3/water) in the presence of magnetohydrodynamics and thermal radiation over a permeable moving surface. Design/methodology/approach By choosing appropriate similarity variables, the partial differential equations are transformed into a system of linear equations which are solved by using the boundary value problem solver (bvp4c) in MATLAB. The implementation of stability analysis verifies the achievable result of the first solution which is considered stable while the second solution is unstable. Findings The findings revealed that the presence of a magnetic field and suction slows down the fluid motion because of the synchronism of the magnetic and electric field occurred from the formation of the Lorentz force. Also, the enhancement of the thermal radiation parameter escalates the heat transfer rate of the current study. Originality/value The present study is addressing the problem of MHD flow and heat transfer analysis of a hybrid nanofluid towards a permeable moving surface, with the consideration of the thermal radiation effect. The authors show that in both cases of assisting and opposing flow, there exist dual solutions within a specific range of the moving parameters. A stability analysis approved that only one of the solutions are physically relevant.

scholarly journals Numerical Simulation of the Thermally Developed Pulsatile Flow of a Hybrid Nanofluid in a Constricted Channel

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2410
Author(s):  
Amjad Ali ◽  
Zainab Bukhari ◽  
Gullnaz Shahzadi ◽  
Zaheer Abbas ◽  
Muhammad Umar
Keyword(s):  
Heat Transfer ◽  
Thermal Radiation ◽  
Heat Transfer Rate ◽  
Pulsatile Flow ◽  
Transfer Rate ◽  
Heat Transfer Analysis ◽  
Hybrid Nanofluid ◽  
Water Based ◽  
The Impact ◽  
Constricted Channel

Heat transfer analysis of the pulsatile flow of a hybrid nanofluid through a constricted channel under the impact of a magnetic field and thermal radiation is presented. Hybrid nanofluids form a new class of nanofluids, distinguished by the thermal properties and functional utilities for improving the heat transfer rate. The behaviors of a water-based copper nanofluid and water-based copper plus a single-wall carbon nanotube, i.e., (Cu–SWCNT/water), hybrid nanofluid over each of velocity, wall shear stress, and temperature profiles, are visualized graphically. The time-dependent governing equations of the incompressible fluid flow are transformed to the vorticity-stream function formulation and solved numerically using the finite difference method. The laminar flow simulations are carried out in 2D for simplicity as the flow profiles are assumed to vary only in the 2D plane represented by the 2D Cartesian geometry. The streamlines and vorticity contours are also shown to demonstrate the flow behviour along the channel. For comparison of the flow characteristics and heat transfer rate, the impacts of variations in Hartmann number, Strouhal number, Prandtl number, and the thermal radiation parameter are analyzed. The effects of the emerging parameters on the skin friction coefficient and Nusselt number are also examined. The hybrid nanofluid is demonstrated to have better thermal characteristics than the traditional one.

Entropy generation analysis during MHD natural convection flow of hybrid nanofluid in a square cavity containing a corrugated conducting block

2019 ◽  
Vol 30 (3) ◽  
pp. 1115-1136 ◽  
Author(s):  
Tahar Tayebi ◽  
Ali J. Chamkha
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Thermal Conductivity ◽  
Entropy Generation ◽  
Thermal Conductivity Ratio ◽  
Hybrid Nanofluid ◽  
Conductivity Ratio ◽  
Square Cavity ◽  
Content Type ◽  
Solid Block

Purpose The purpose of this paper is to study the influence of magnetic field on entropy generation and natural convection inside an enclosure filled with a hybrid nanofluid and having a conducting wavy solid block. Also, the effect of fluid–solid thermal conductivity ratio is investigated. Design/methodology/approach The governing equations that are formulated in the dimensionless form are discretized via finite volume method. The velocity–pressure coupling is assured by the SIMPLE algorithm. Heat transfer balance is used to verify the convergence. The validation of the numerical results was performed by comparing qualitatively and quantitatively the results with previously published investigations. Findings The results indicate that the magnetic field and the conductivity ratio of the wavy solid block can significantly affect the dynamic and thermal field and, consequently, the heat transfer rate and entropy generation because of heat transfer, fluid friction and magnetic force. Originality/value To the best of the authors’ knowledge, the present numerical study is the first attempt to use hybrid nanofluid for studying the entropy generation because of magnetohydrodynamic natural convective flow in a square cavity with the presence of a wavy circular conductive cylinder. Irreversibilities due to magnetic effect are taken into account. The effect of fluid–solid thermal conductivity ratio is considered.

Entropy generation and heat transfer analysis for ferrofluid flow between two rotating disks with variable conductivity

2021 ◽  
pp. 095440622199118
Author(s):  
Anupam Bhandari
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Differential Equations ◽  
Entropy Generation ◽  
Heat Transfer Analysis ◽  
Entropy Generation Rate ◽  
Geometrical Parameters ◽  
Rotating Disks ◽  
Coupled Differential Equations ◽  
Lower Disk

Present model analyze the flow and heat transfer of water-based carbon nanotubes (CNTs) [Formula: see text] ferrofluid flow between two radially stretchable rotating disks in the presence of a uniform magnetic field. A study for entropy generation analysis is carried out to measure the irreversibility of the system. Using similarity transformation, the governing equations in the model are transformed into a set of nonlinear coupled differential equations in non-dimensional form. The nonlinear coupled differential equations are solved numerically through the finite element method. Variable viscosity, variable thermal conductivity, thermal radiation, and volume concentration have a crucial role in heat transfer enhancement. The results for the entropy generation rate, velocity distributions, and temperature distribution are graphically presented in the presence of physical and geometrical parameters of the flow. Increasing the values of ferromagnetic interaction number, Reynolds number, and temperature-dependent viscosity enhances the skin friction coefficients on the surface and wall of the lower disk. The local heat transfer rate near the lower disk is reduced in the presence of Harman number, Reynolds number, and Prandtl number. The ferrohydrodynamic flow between two rotating disks might be useful to optimize the use of hybrid nanofluid for liquid seals in rotating machinery.

scholarly journals Entropy Generation Analysis and Radiated Heat Transfer in MHD (Al2O3-Cu/Water) Hybrid Nanofluid Flow

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 887
Author(s):  
Nabeela Parveen ◽  
Muhammad Awais ◽  
Saeed Ehsan Awan ◽  
Wasim Ullah Khan ◽  
Yigang He ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Entropy Generation ◽  
Magnetic Induction ◽  
Axisymmetric Flow ◽  
Computational Method ◽  
Stability And Convergence ◽  
Hybrid Nanofluid ◽  
Physical Factors ◽  
Induction Effect ◽  
Entropy Generation Number

This research concerns the heat transfer and entropy generation analysis in the MHD axisymmetric flow of Al2O3-Cu/H2O hybrid nanofluid. The magnetic induction effect is considered for large magnetic Reynolds number. The influences of thermal radiations, viscous dissipation and convective temperature conditions over flow are studied. The problem is modeled using boundary layer theory, Maxwell’s equations and Fourier’s conduction law along with defined physical factors. Similarity transformations are utilized for model simplification which is analytically solved with the homotopy analysis method. The h-curves upto 20th order for solutions establishes the stability and convergence of the adopted computational method. Rheological impacts of involved parameters on flow variables and entropy generation number are demonstrated via graphs and tables. The study reveals that entropy in system of hybrid nanofluid affected by magnetic induction declines for [...]

scholarly journals Analytical Assessment of (Al2O3–Ag/H2O) Hybrid Nanofluid Influenced by Induced Magnetic Field for Second Law Analysis with Mixed Convection, Viscous Dissipation and Heat Generation

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 498
Author(s):  
Wasim Ullah Khan ◽  
Muhammad Awais ◽  
Nabeela Parveen ◽  
Aamir Ali ◽  
Saeed Ehsan Awan ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Heat Generation ◽  
Transfer Rate ◽  
Second Law ◽  
Hybrid Nanofluid ◽  
Entropy Generation Number ◽  
Generation Number ◽  
Second Law Analysis

The current study is an attempt to analytically characterize the second law analysis and mixed convective rheology of the (Al2O3–Ag/H2O) hybrid nanofluid flow influenced by magnetic induction effects towards a stretching sheet. Viscous dissipation and internal heat generation effects are encountered in the analysis as well. The mathematical model of partial differential equations is fabricated by employing boundary-layer approximation. The transformed system of nonlinear ordinary differential equations is solved using the homotopy analysis method. The entropy generation number is formulated in terms of fluid friction, heat transfer and Joule heating. The effects of dimensionless parameters on flow variables and entropy generation number are examined using graphs and tables. Further, the convergence of HAM solutions is examined in terms of defined physical quantities up to 20th iterations, and confirmed. It is observed that large λ1 upgrades velocity, entropy generation and heat transfer rate, and drops the temperature. High values of δ enlarge velocity and temperature while reducing heat transport and entropy generation number. Viscous dissipation strongly influences an increase in flow and heat transfer rate caused by a no-slip condition on the sheet.

Sign in / Sign up

Export Citation Format

Share Document