ELECTRONICS FOR HIGH SPEED, BURST MODE OPTICAL COMMUNICATIONS

1990 ◽  
Vol 01 (03n04) ◽  
pp. 223-243 ◽  
Author(s):  
R.G. SWARTZ ◽  
Y. OTA
Keyword(s):  
Communication Systems ◽  
High Speed ◽  
Data Communication ◽  
Optical Fiber Communication ◽  
Digital Data ◽  
Optical Data ◽  
Data Link ◽  
Fiber Communication ◽  
Burst Mode ◽  
Multiple Channel

Electronics for burst mode data communication over an optical data link will contribute to wider acceptance of photonic technology. This paper describes the concepts and difficulties inherent in burst mode optical communication systems, and proposes a new solution employing an ultra-high speed, high accuracy peak detector. Sensitivity penalties associated with this technique are reviewed. The method was implemented in an optical receiver with dc to 500 Mb/s operation, and at 200 Mb/s, demonstrates an isolated pulse sensitivity of −29.5 dBm, and pulse width distortion less than lns. An example application, the Multiple channel Optical Data LINK (MODLINK), is described: a fully dc-coupled, 12 parallel channel digital data link system designed for high speed optical fiber communication at bit rates ranging from dc to 200 Mb/s per channel, applicable at distances of centimeters to over 3 km.

Novel Manchester-Based Multilevel Signaling for High-Speed Optical Communication Systems

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
Festus Idowu Oluwajobi ◽  
Nguyen Dong-Nhat ◽  
Amin Malekmohammadi
Keyword(s):  
Communication Systems ◽  
High Speed ◽  
Chromatic Dispersion ◽  
Optical Fiber Communication ◽  
Pulse Amplitude ◽  
Calculation Model ◽  
Fiber Communication ◽  
Receiver Sensitivity ◽  
Communication Links ◽  
Dispersion Tolerance

AbstractIn this paper, the performance of a novel multilevel signaling based on Manchester code namely four-level Manchester Coding (4-MC) technique is investigated for next generation high-speed optical fiber communication links. The performance of 4-MC is studied and compared with conventional Manchester modulation and four-level pulse amplitude modulation (4-PAM) formats in terms of receiver sensitivity, spectral efficiency and dispersion tolerance at the bit rate of 40 Gb/s. The bit error rate (BER) calculation model for the proposed multilevel scheme has also been developed. The calculated receiver sensitivity and the chromatic dispersion tolerance at the BER of 10–9 of the proposed scheme are −22 dBm and 67.5 ps/nm, respectively. It is observed that, 4-MC scheme is superior in comparison to 4-PAM by 3.5 dB in terms of receiver sensitivity in back-to-back scenario. Therefore, the proposed scheme can be considered as an alternative to current 4-PAM system.

scholarly journals Nano-grating Assisted Light Absorption Enhancement for MSM-PDs Performance Improvement: An Updated Review

Photonics ◽  
2021 ◽  
Vol 8 (12) ◽  
pp. 539
Author(s):  
Narottam Das ◽  
Mohammad Nur-E-Alam ◽  
Alif Islam ◽  
Ain Zulaikha Maslihan Ain
Keyword(s):  
Light Absorption ◽  
Communication Systems ◽  
High Speed ◽  
High Performance ◽  
Optical Fiber Communication ◽  
Review Article ◽  
Absorption Enhancement ◽  
Fiber Communication ◽  
Communication Device ◽  
Primary Focus

The primary focus of this review article mainly emphasizes the light absorption enhancement for various nanostructured gratings assisted metal-semiconductor-metal photodetectors (MSM-PDs) that are so far proposed and developed for the improvement of light capturing performance. The MSM-PDs are considered as one of the key elements in the optical and high-speed communication systems for applications such as faster optical fiber communication systems, sensor networks, high-speed chip-to-chip interconnects, and high-speed sampling. The light absorption enhancement makes the MSM-PDs an ideal candidate due to their excellent performances in detection, especially in satisfying the high-speed or high-performance device requirements. The nano-grating assisted MSM-PDs are preordained to be decorous for many emerging and existing communication device applications. There have been a significant number of research works conducted on the implementation of nano-gratings, and still, more researches are ongoing to raise the performance of MSM-PDs particularly, in terms of enhancing the light absorption potentialities. This review article aims to provide the latest update on the exertion of nano-grating structures suitable for further developments in the light absorption enhancement of the MSM-PDs.

Interface Reactions in LiNbO3 Based Optoelectronics Devices

2000 ◽  
Vol 654 ◽  
Author(s):  
Hirotoshi Nagata ◽  
Yasuyuki Miyama ◽  
Kaoru Higuma ◽  
Yoshihiro Hashimoto ◽  
Futoshi Yamamoto ◽  
...  
Keyword(s):  
Communication Systems ◽  
High Speed ◽  
Secondary Ion Mass Spectrometry ◽  
Optical Fiber Communication ◽  
Fiber Communication ◽  
Long Term Stability ◽  
Interface Reactions ◽  
Study Results ◽  
Secondary Ion

AbstractWe present secondary ion mass spectrometry (SIMS) study results on interfaces of LiNbO3 based optoelectronic devices, which have been performed in order to examine the cause of device failures. The devices are widely used in current high-speed optical fiber communication systems, and such investigation from a materials-viewpoint is important to improve the device quality. Especially, the device long-term stability is strongly affected by alkali-contaminants diffused into the SiO2 buffer layer of device, and here we confirmed that an adoption of common Si3N4 passivation is effective in preventing the process-induced contamination without any influence to device performance.

scholarly journals Coded Modulation and Impairment Compensation Techniques in Optical Fiber Communication

2021 ◽  
Author(s):  
Zhipei Li ◽  
Dong Guo ◽  
Ran Gao
Keyword(s):  
Optical Fiber ◽  
Communication Systems ◽  
High Speed ◽  
Transmission Rate ◽  
Optical Fiber Communication ◽  
Coded Modulation ◽  
Coherent Detection ◽  
Modulation Scheme ◽  
Fiber Communication ◽  
Modulation Format

This chapter deals with coded modulation and impairment compensation techniques in optical fiber communication. Probabilistic shaping is a new coded modulation technology, which can reduce transmission power by precoding, reduce bit error rate and improve communication rate. We proposed a probabilistic shaping 16QAM modulation scheme based on trellis coded modulation. Experimental results show that this scheme can achieve better optical SNR gain and BER performance. On the other hand, in order to meet the demand of transmission rate of next generation high speed optical communication systems, multi-dimensional modulation and coherent detection are sufficiently applied. The imperfect characteristics of optoelectronic devices and fiber link bring serious impairments to the high baud-rate and high order modulation format signal, causes of performance impairment are analyzed, pre-compensation and receiver side’s DSP techniques designed for coherent systems are introduced.

Sign in / Sign up

Export Citation Format

Share Document