scholarly journals Route guidance strategies revisited: Comparison and evaluation in an asymmetric two-route traffic network

2014 ◽  
Vol 25 (04) ◽  
pp. 1450005 ◽  
Author(s):  
Zhengbing He ◽  
Bokui Chen ◽  
Ning Jia ◽  
Wei Guan ◽  
Benchuan Lin ◽  
...  

To alleviate traffic congestion, a variety of route guidance strategies have been proposed for intelligent transportation systems. A number of strategies are introduced and investigated on a symmetric two-route traffic network over the past decade. To evaluate the strategies in a more general scenario, this paper conducts eight prevalent strategies on an asymmetric two-route traffic network with different slowdown behaviors on alternative routes. The results show that only mean velocity feedback strategy (MVFS) is able to equalize travel time, i.e. approximate user optimality (UO); while the others fail due to incapability of establishing relations between the feedback parameters and travel time. The paper helps better understand these strategies, and suggests MVFS if the authority intends to achieve user optimality.

2019 ◽  
Vol 9 (13) ◽  
pp. 2717 ◽  
Author(s):  
Pedro Perez-Murueta ◽  
Alfonso Gómez-Espinosa ◽  
Cesar Cardenas ◽  
Miguel Gonzalez-Mendoza

Delays in transportation due to congestion generated by public and private transportation are common in many urban areas of the world. To make transportation systems more efficient, intelligent transportation systems (ITS) are currently being developed. One of the objectives of ITS is to detect congested areas and redirect vehicles away from them. However, most existing approaches only react once the traffic jam has occurred and, therefore, the delay has already spread to more areas of the traffic network. We propose a vehicle redirection system to avoid congestion that uses a model based on deep learning to predict the future state of the traffic network. The model uses the information obtained from the previous step to determine the zones with possible congestion, and redirects the vehicles that are about to cross them. Alternative routes are generated using the entropy-balanced k Shortest Path algorithm (EBkSP). The proposal uses information obtained in real time by a set of probe cars to detect non-recurrent congestion. The results obtained from simulations in various scenarios have shown that the proposal is capable of reducing the average travel time (ATT) by up to 19%, benefiting a maximum of 38% of the vehicles.


2012 ◽  
Vol 39 (8) ◽  
pp. 915-924 ◽  
Author(s):  
Behzad Rouhieh ◽  
Ciprian Alecsandru

Over the past couple of decades the advancements in the areas of information and computational technology allowed for a variety of intelligent transportation systems developments and deployments. This study investigates an advanced traveler information system (ATIS) and (or) an advanced public transit system (APTS) adaptive and real-time transit routing component. The proposed methodology is applied to bus routes with fixed, predefined bus line alignments. It is shown that routing buses on such systems can be modeled in real-time by employing an associated Markov chain with reward model to minimize the impact of congested traffic conditions on the travelers and the overall operation cost of the transit system. A case study using a traffic and transit data from a real-world bus line was used to apply the proposed bus routing approach. It was found that under certain traffic congestion conditions buses should be re-routed to minimize their travel time and the associated system costs. The hypothetical congestion scenarios investigated show that individual bus travel time delays range between 50 and 740 s when the proposed adaptive routing is employed. The proposed methodology is also suitable for application to transit systems that run on a demand-adaptive basis (the bus line alignment changes with the travelers demand). Additional calibration and future integration of the system into specific ATIS and (or) APTS user services will be investigated.


2018 ◽  
Vol 4 (10) ◽  
pp. 10
Author(s):  
Ankur Mishra ◽  
Aayushi Priya

Transportation or transport sector is a legal source to take or carry things from one place to another. With the passage of time, transportation faces many issues like high accidents rate, traffic congestion, traffic & carbon emissions air pollution, etc. In some cases, transportation sector faced alleviating the brutality of crash related injuries in accident. Due to such complexity, researchers integrate virtual technologies with transportation which known as Intelligent Transport System. Intelligent Transport Systems (ITS) provide transport solutions by utilizing state-of-the-art information and telecommunications technologies. It is an integrated system of people, roads and vehicles, designed to significantly contribute to improve road safety, efficiency and comfort, as well as environmental conservation through realization of smoother traffic by relieving traffic congestion. This paper aims to elucidate various aspects of ITS - it's need, the various user applications, technologies utilized and concludes by emphasizing the case study of IBM ITS.


2018 ◽  
Vol 7 (9) ◽  
pp. 334
Author(s):  
Chi-Hua Chen ◽  
Kuen-Rong Lo

This editorial introduces the special issue entitled “Applications of Internet of Things”, of ISPRS International Journal of Geo-Information. Topics covered in this issue include three main parts: (I) intelligent transportation systems (ITS), (II) location-based services (LBS), and (III) sensing techniques and applications. Three papers on ITS are as follows: (1) “Vehicle positioning and speed estimation based on cellular network signals for urban roads,” by Lai and Kuo; (2) “A method for traffic congestion clustering judgment based on grey relational analysis,” by Zhang et al.; and (3) “Smartphone-based pedestrian’s avoidance behavior recognition towards opportunistic road anomaly detection,” by Ishikawa and Fujinami. Three papers on LBS are as follows: (1) “A high-efficiency method of mobile positioning based on commercial vehicle operation data,” by Chen et al.; (2) “Efficient location privacy-preserving k-anonymity method based on the credible chain,” by Wang et al.; and (3) “Proximity-based asynchronous messaging platform for location-based Internet of things service,” by gon Jo et al. Two papers on sensing techniques and applications are as follows: (1) “Detection of electronic anklet wearers’ groupings throughout telematics monitoring,” by Machado et al.; and (2) “Camera coverage estimation based on multistage grid subdivision,” by Wang et al.


Author(s):  
V. Naren Thiruvalar ◽  
E. Vimal

The main objective of this project is to connect the vehicles together and avoid accidents by using V2V Communication. The vehicles are to be connected together by means of DSRC algorithm which is used for transceiving alert messages among the connected vehicles, in case of any emergency situation such as accidents. The Vehicle-to-Vehicle (V2V) and Vehicle-to- Infrastructure (V2I) technologies are specific cases of IoT and key enablers for Intelligent Transportation Systems (ITS). V2V and V2I have been widely used to solve different problems associated with transportation in cities, in which the most important is traffic congestion. A high percentage of congestion is usually presented by the inappropriate use of resources in vehicular infrastructure. In addition, the integration of traffic congestion in decision making for vehicular traffic is a challenge due to its high dynamic behaviour. An increase in the infrastructure growth is a possible solution but turns out to be costly in terms of both time and effort. Various applications that target transport efficiency could make use of the vast information collected by vehicles: safety, traffic management, pollution monitoring, tourist information, etc.


Author(s):  
Seung-Jun Kim ◽  
Wonho Kim ◽  
L. R. Rilett

The calibration of traffic microsimulation models has received widespread attention in transportation modeling. A recent concern is whether these models can simulate traffic conditions realistically. The recent widespread deployment of intelligent transportation systems in North America has provided an opportunity to obtain traffic-related data. In some cases the distribution of the traffic data rather than simple measures of central tendency such as the mean, is available. This paper examines a method for calibrating traffic microsimulation models so that simulation results, such as travel time, represent observed distributions obtained from the field. The approach is based on developing a statistically based objective function for use in an automated calibration procedure. The Wilcoxon rank–sum test, the Moses test and the Kolmogorov–Smirnov test are used to test the hypothesis that the travel time distribution of the simulated and the observed travel times are statistically identical. The approach is tested on a signalized arterial roadway in Houston, Texas. It is shown that potentially many different parameter sets result in statistically valid simulation results. More important, it is shown that using simple metrics, such as the mean absolute error, may lead to erroneous calibration results.


Sensors ◽  
2019 ◽  
Vol 19 (10) ◽  
pp. 2229 ◽  
Author(s):  
Sen Zhang ◽  
Yong Yao ◽  
Jie Hu ◽  
Yong Zhao ◽  
Shaobo Li ◽  
...  

Traffic congestion prediction is critical for implementing intelligent transportation systems for improving the efficiency and capacity of transportation networks. However, despite its importance, traffic congestion prediction is severely less investigated compared to traffic flow prediction, which is partially due to the severe lack of large-scale high-quality traffic congestion data and advanced algorithms. This paper proposes an accessible and general workflow to acquire large-scale traffic congestion data and to create traffic congestion datasets based on image analysis. With this workflow we create a dataset named Seattle Area Traffic Congestion Status (SATCS) based on traffic congestion map snapshots from a publicly available online traffic service provider Washington State Department of Transportation. We then propose a deep autoencoder-based neural network model with symmetrical layers for the encoder and the decoder to learn temporal correlations of a transportation network and predicting traffic congestion. Our experimental results on the SATCS dataset show that the proposed DCPN model can efficiently and effectively learn temporal relationships of congestion levels of the transportation network for traffic congestion forecasting. Our method outperforms two other state-of-the-art neural network models in prediction performance, generalization capability, and computation efficiency.


2019 ◽  
Vol 29 ◽  
pp. 03002 ◽  
Author(s):  
Mãdãlin-Dorin Pop

The studies and real situations shown that the traffic congestion is one of nowadays highest problems. This problem wassolved in the past using roundabouts and traffic signals. Taking in account the number of cars that is increasing continuously, we can see that past approaches using traffic lights with fixed-time controller for traffic signals timing is obsolete. The present and the future is the using of Intelligent Transportation Systems. Traffic lights systems should be aware about realtime traffic parameters and should adapt accordingly to them. The purpose of this paper is to present a new approach to control traffic signals using rate-monotonic scheduling. Obtained results will be compared with the results obtained by using others real-time scheduling algorithms.


Sign in / Sign up

Export Citation Format

Share Document