Designing on a Vehicle Body Control Module Performance Tester

2019 ◽  
Vol 33 (08) ◽  
pp. 1959026
Author(s):  
Zuowu Ding
Keyword(s):  
Window Glass ◽  
Vehicle Body ◽  
Current Sensor ◽  
Central Control ◽  
Serial Port ◽  
Control Module ◽  
Serial Port Communication ◽  
Close Time ◽  
Short Circuits ◽  
Module Performance

To test short-circuits between vehicle body control module (BCM) pins, to measure window glass-frame riser and vehicle central control door lock motors’ working current, working voltage and maximum open and close time, a kind of BCM performance tester is designed. MC9S12XS128 singlechip is used to act as the performance tester CPU. PAB817 photo couplers are used to act as high and low power supply isolated devices. ACS712-30A is used to act as motor working current sensor. One MAX232 is used to act as serial port communication element between the BCM performance tester and the computer. The brand XXX BCM is tested by the BCM performance tester. The results indicate that the BCM performance tester can meet the needs. The detecting results can afford proof for vehicle manufacturers and vehicle parts manufacturers to judge the BCM quality.

scholarly journals Development of an early warning system for loose automobile tires

2020 ◽  
Vol 103 (3) ◽  
pp. 003685042094088
Author(s):  
Huibo Wu ◽  
Fei Song ◽  
Kainan Wu ◽  
Cheng Chen ◽  
Xiaohua Wang
Keyword(s):  
Early Warning ◽  
Early Warning System ◽  
Traffic Accidents ◽  
Warning System ◽  
Working Environment ◽  
Vehicle Body ◽  
Economic Losses ◽  
Control Module ◽  
Alarm Signal ◽  
Monitoring Module

The looseness of tires or even falling off from cars will lead to serious traffic accidents. Once it occurs, it will bring casualties and huge economic losses to society, seriously affecting the traffic safety. To mitigate such possible safety concerns, an early loosening warning system is developed in this article. The system consists of the tire monitoring module and the working control module. The tire monitoring module is installed on the tire and is designed with no power supply. The control module is installed in the vehicle body. Signal transmission between the two modules is achieved through wireless radio frequency. In the driving, once the tire is loosened, the monitoring device will send out the alarm signal automatically and wirelessly. After the driver gets the alarm signal, he can immediately perform the emergency processing, parking, and inspection, which can avoid traffic accidents caused by it. This article introduces the detailed structure, working principle, and operation process of the system. This early warning system has simple structure, high reliability, and is easy to use. It can be used in the common working environment of automobiles. Meanwhile, it is also the foundation of intelligent connected vehicle.

The Ammonia Leak Monitoring and Warning System Based on Wireless Sensor Network in Industrial Environments

2014 ◽  
Vol 538 ◽  
pp. 348-351
Author(s):  
Guang Xue Yang ◽  
Wei Han
Keyword(s):  
Warning System ◽  
Ammonia Concentration ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Serial Port ◽  
Wireless Technology ◽  
Ammonia Sensor ◽  
Concentration Data ◽  
Serial Port Communication ◽  
The Coordinator

In order to prevent the ammonia leak caused casualties incidents, this paper adopts ZigBee wireless technology to real-time monitoring of ammonia concentration. Equipped with MQ137 ammonia sensor in the terminal node, and the use of STM8 microcontroller collected the ammonia concentration data. The data will be transmitted to the coordinator through ZigBee. Using LabVIEW to design the monitoring interface of computer, and read concentration data through the serial port communication. When the ammonia concentration exceeds the preset value, the GSM module will send the location of leak in the form of short messages to staff. Through the reasonable arrangement of sensor nodes in ammonia production workshop, can effectively avoid the ammonia leak hurting the safety of people's life and property.

Precision seeding parameter monitoring system based on laser sensor and wireless serial port communication

2021 ◽  
Vol 190 ◽  
pp. 106429
Author(s):  
Chunji Xie ◽  
Dongxing Zhang ◽  
Li Yang ◽  
Tao Cui ◽  
Xiantao He ◽  
...  
Keyword(s):  
Monitoring System ◽  
Laser Sensor ◽  
Serial Port ◽  
Serial Port Communication ◽  
Parameter Monitoring

The Implementation of Serial Communication CSerial the Port Class

2013 ◽  
Vol 756-759 ◽  
pp. 2678-2681
Author(s):  
Nai Ning Wen ◽  
Shang Fu Gong ◽  
Yan Jun Wang
Keyword(s):  
Serial Communication ◽  
Third Party ◽  
Serial Port ◽  
Serial Port Communication ◽  
Advantages And Disadvantages ◽  
Programming Tool ◽  
Communication Program ◽  
Microsoft Windows

llustrating the advantages and disadvantages of several commonly used methods to develop serial communication program under Microsoft Windows, this article uses a serial communication class through a third party, namely the use the Remon Spekrijse provided free serial port class CSerial the Port class, complete the RS232 serial port communication between the examples show, CSerial Port is a very simple, convenient and convenient and simple multi-threaded serial programming tool.

scholarly journals Software Engineering: A fundamental Approach to Automate and Interface Medical Electronic Systems with Computers in Healthcare Systems

2007 ◽  
Vol 30 (1) ◽  
pp. 75-82
Author(s):  
Hashim M. Twaakyondo ◽  
Joseph E. Mbowe
Keyword(s):  
Interface Design ◽  
Communication Systems ◽  
Electronic Device ◽  
Database Systems ◽  
Requirement Engineering ◽  
Serial Port ◽  
New Paradigm ◽  
Serial Port Communication ◽  
Use Of Time ◽  
Programming Knowledge

The cost for application software and propriatry standards (i.e. data structure and formats) required for storing clinicaldatasets from electronic device cause the use of time-consuming paper-based documentation and/or the transfer ofelectronic lab records manually to the PC database systems in Mother-Offspring Malaria Study (MOMS) LaboratoryUnit located in Morogoro Regional Hospital, Tanzania. We have explored the ability to extract laboratory results fromHaematology analyzer machine for easy management, access and storage. The methodology and tools used during thestudy includes; site survey and hands-on practice for requirement engineering, visual basic 6.0 for interface design andMicrosoft Access for relational database design. The study has developed a model “ CO mpose- TRA ansmit- CO nvent-CO mpose” convention (acronym COTRACOCO) to implements an open serial port interface that required only a driverclass to execute the labs outputs for storage in database with at run-time with less programming knowledge. The studydemonstrated that the COTRACOCO convention presented is general and may promote a new paradigm for establishingthe robust serial port communication systems for any digital device.

Design and Implementation of a Fast General Purpose Fuzzy Processor

2015 ◽  
pp. 543-558 ◽  
Author(s):  
Mohamed Ibrahim Mahmoud ◽  
Sayed Mohamed El-Araby ◽  
Safey Ahmed Shehata ◽  
Refaat Mohamed Fikry AbouZaid ◽  
Fathi Abd El-Samie
Keyword(s):  
Graphical User Interface ◽  
Sprinkler System ◽  
General Purpose ◽  
Serial Port ◽  
Software Environment ◽  
Serial Port Communication ◽  
C Programming Language ◽  
Design And Implementation ◽  
C Programming ◽  
Integrated Software

In this paper, a Fast Fuzzy processor (FP) is proposed. This processor, which is implemented using FPGA, has four inputs and one output with 8-bits width for each. The proposed processor is synthesized, functionally verified and implemented using Xilinx Integrated Software Environment (ISE) and is tested using Xilinx Spartan 3E starter kit. A PC Graphical User Interface (GUI) is programmed using C# programming language to select and download the parameters of the processor through the serial port communication. The proposed processor is experimentally tested through water sprinkler system example. The experimental results approve the excellent performance of the proposed processor.

AutoCell Systematic Evolution of Ligands by Exponential Enrichment: The Software Designed and Developed for the Automated Screening System of Nucleic Acid Aptamers

2021 ◽  
Vol 21 (10) ◽  
pp. 5363-5369
Author(s):  
Yuhong Pei ◽  
Chao Wang ◽  
Zhu Chen ◽  
Song Li ◽  
Hui Chen ◽  
...  
Keyword(s):  
Time Process ◽  
Serial Port ◽  
Control Center ◽  
Serial Port Communication ◽  
Efficient Data ◽  
Systematic Evolution ◽  
Automated Screening ◽  
Data Acquisition And Processing ◽  
Exponential Enrichment ◽  
Feasible Experiment

Aptamers are a new kind of nano-probes for bioassays and drug delivery, etc. In this paper, software has been developed as an automatic control center for the automated aptamer selecting system which realized the high integration of aptamer selection, data acquisition and processing. This software, applied in windows system, is developed by C# with the Microsoft Visual Studio 2015 integrated developing environment and the database used in this software is implemented using open source relational database MYSQL. According to the requirement analysis, this software realized various important necessary functions including feasible experiment design, auto-control of the hardware, real time process monitoring and efficient data management which perfectly satisfies the users’ demands. During the actual experiment operation, this software worked smoothly and assumed stable serial port communication between it and the hardware, meanwhile, the interaction between the software and MYSQL remained good stability. As a consequence, it is practical and reasonable to apply this software to the automated aptamer selecting system for research.

Sign in / Sign up

Export Citation Format

Share Document