Computational study on the mechanism of transition metal-catalyzed formation of highly substituted furo [3,4-d] [1,2] oxazines

2018 ◽  
Vol 17 (01) ◽  
pp. 1850011 ◽  
Author(s):  
Abigail Owusuwaa Gyamfi ◽  
Martin Amponsah Yeboah ◽  
Richard Tia ◽  
Evans Adei

The mechanism of gold(III)-catalyzed 1,3-dipolar [[Formula: see text]] cycloaddition reactions of 2-(1-alkynyl)-2-alken-1-ones with nitrones to afford highly-substituted furo [3,4-d] [1,2] oxazines, which are useful as structural skeletons in biologically active compounds and as synthetic building blocks in organic synthesis, have been studied computationally. The results show that the reaction proceeds via the formation of a [Formula: see text]-complex in which the gold moiety coordinates to the triple bond of the 2-(1-alkynyl)-2-alken-1-ones, resulting in an intramolecular cyclization of the gold intermediate to generate a carbocation intermediate which is trapped by the nucleophilic oxygen of the nitrone to form a furanyl–gold complex, which upon subsequent cyclization affords the furo [3,4-d] [1,2] oxazine as well as regenerates the gold catalyst. The highest activation barrier in the entire cycle is 19.5[Formula: see text]kcal/mol which accompanies the intramolecular cyclization step. The activation barriers for the reactions of 2-(1-alkynyl)2-alken-1-ones with electron-donating and cyclic substituents are generally lower compared to those of the parent 2-(1-alkynyl)2-alken-1-one while the reactions of 2-(1-alkynyl)2-alken-1-ones with electron-withdrawing substituents have higher activation barriers. Preliminary exploratory calculations on the possibility of replacing gold, an expensive and rare metal, with a copper-based catalyst for the reaction, show that for the key elementary steps, the Cu (III) catalyst is at least as active as the Au (III) complex, thus providing a cheaper route to furo [3,4-d] [1,2] oxazine.

Molecules ◽  
2020 ◽  
Vol 25 (14) ◽  
pp. 3147 ◽  
Author(s):  
Mickael Choury ◽  
Alexandra Basilio Lopes ◽  
Gaëlle Blond ◽  
Mihaela Gulea

Medium-sized heterocycles (with 8 to 11 atoms) constitute important structural components of several biologically active natural compounds and represent promising scaffolds in medicinal chemistry. However, they are under-represented in the screening of chemical libraries as a consequence of being difficult to access. In particular, methods involving intramolecular bond formation are challenging due to unfavorable enthalpic and entropic factors, such as transannular interactions and conformational constraints. The present review focuses on the synthesis of medium-sized heterocycles by transition-metal-catalyzed intramolecular cyclization, which despite its drawbacks remains a straightforward and attractive synthesis strategy. The obtained heterocycles differ in their nature, number of heteroatoms, and ring size. The methods are classified according to the metal used (palladium, copper, gold, silver), then subdivided according to the type of bond formed, namely carbon–carbon or carbon–heteroatom.


Synlett ◽  
2019 ◽  
Vol 30 (11) ◽  
pp. 1339-1345
Author(s):  
Zhiyuan Chen ◽  
Wenjin Wu ◽  
Tiantian Zheng ◽  
Jie Tan ◽  
Shouzhi Pu

The Au/Ag-cocatalyzed stereoselective addition reaction of cyanophenol anion species generated in situ with unactivated propargyl alcohols to produce functionalized (Z)-allyl alcohols in mostly good yields is reported. Benzo[d]isoxazoles were found to be excellent building blocks for the production of highly reactive cyanophenol anions from Kemp elimination reactions, thus serving as a masked benzonitrile source for the preparation of organonitrile derivatives. Silver salt combined with gold catalyst were found to be necessary for the success of this transformation.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ting Wang ◽  
Yu Zhou ◽  
Yao Xu ◽  
Gui-Juan Cheng

AbstractSelective oxidation is one of the most important and challenging transformations in both academic research and chemical industry. Recently, a highly selective and efficient way to synthesize biologically active γ-hydroxy-α,β-unsaturated molecules from Cu-catalyzed vinylogous aerobic oxidation of α,β- and β,γ-unsaturated compounds has been developed. However, the detailed reaction mechanism remains elusive. Herein, we report a density functional theory study on this Cu-catalyzed vinylogous aerobic oxidation of γ,γ-disubstituted α,β- and β,γ-unsaturated isomers. Our computational study unveils detailed mechanism for each elementary step, i.e. deprotonation, O2 activation, and reduction. Besides, the origin of regioselectivity, divergent reactivities of substrates as well as reducing agents, and the byproduct generation have also been investigated. Notably, the copper catalyst retains the + 2 oxidation state through the whole catalytic cycle and plays essential roles in multiple steps. These findings would provide hints on mechanistic studies and future development of transition metal-catalyzed aerobic oxidation reactions.


Author(s):  
Hannah E. Burdge ◽  
Takuya Oguma ◽  
Takahiro Kawajiri ◽  
Ryan Shenvi

<div><div><div><p>The first synthesis of GB22 was accomplished by a con- cise, modular route. Two building blocks converged in a novel sp3-sp2 attached-ring coupling that used Ir/Ni dual-catalysis to reverse the regioselectivity of siloxycy- clopropane arylation. This cross-coupling proved general to access β-substituted tetralones via ring-expansion of indanone-derived siloxycyclopropanes. The congested, bridging rings of the GB alkaloids were completed using an aluminum-HFIP complex that effected intramolecular cyclization of an acid-labile substrate.</p></div></div></div>


2019 ◽  
Author(s):  
Hannah E. Burdge ◽  
Takuya Oguma ◽  
Takahiro Kawajiri ◽  
Ryan Shenvi

<div><div><div><p>The first synthesis of GB22 was accomplished by a con- cise, modular route. Two building blocks converged in a novel sp3-sp2 attached-ring coupling that used Ir/Ni dual-catalysis to reverse the regioselectivity of siloxycy- clopropane arylation. This cross-coupling proved general to access β-substituted tetralones via ring-expansion of indanone-derived siloxycyclopropanes. The congested, bridging rings of the GB alkaloids were completed using an aluminum-HFIP complex that effected intramolecular cyclization of an acid-labile substrate.</p></div></div></div>


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Rong Xia ◽  
Dong Tian ◽  
Shyam Kattel ◽  
Bjorn Hasa ◽  
Haeun Shin ◽  
...  

AbstractElectrifying chemical manufacturing using renewable energy is an attractive approach to reduce the dependence on fossil energy sources in chemical industries. Primary amines are important organic building blocks; however, the synthesis is often hindered by the poor selectivity because of the formation of secondary and tertiary amine byproducts. Herein, we report an electrocatalytic route to produce ethylamine selectively through an electroreduction of acetonitrile at ambient temperature and pressure. Among all the electrocatalysts, Cu nanoparticles exhibit the highest ethylamine Faradaic efficiency (~96%) at −0.29 V versus reversible hydrogen electrode. Under optimal conditions, we achieve an ethylamine partial current density of 846 mA cm−2. A 20-hour stable performance is demonstrated on Cu at 100 mA cm−2 with an 86% ethylamine Faradaic efficiency. Moreover, the reaction mechanism is investigated by computational study, which suggests the high ethylamine selectivity on Cu is due to the moderate binding affinity for the reaction intermediates.


2022 ◽  
Vol 19 ◽  
Author(s):  
Kamlesh Sharma

Abstract: The mechanism of metal-catalyzed spiroketalization of propargyl acetonide is explored by employing DFT with the B3LYP/6-31+G(d) method. Acetonide is used as a regioselective regulator in the formation of monounsaturated spiroketal. The energies of transition states, intermediates, reactants and products are calculated to provide new insight into the mechanism of the reaction. The energetic features, validation of the observed trends in regioselectivity are conferred in terms of electronic indices via FMO analysis. The presence of acetonide facilitates a stepwise spiroketalization as it masks the competing nucleophile, and thus hydroxyl group present, exclusively acts as a nucleophile. The vinyl gold intermediate 3 is formed from 2 via activation barrier TS1. This is the first ring formation, which is 6-exo-dig cyclization. The intermediate 3 is converted into allenyl ether 4, which isomerizes to the intermediate oxocarbenium ion 5 via activation barrier TS2. The intermediate 5 cyclizes to 6 via TS3. This is the second ring formation. The intermediate 6 on protodeauration turns into 6,6-monounsaturated spiroketal 7. It is concluded that acetonide as a protecting group serves the purpose, and thus a wide range of spiroketals can be prepared, regioselectivity.


2002 ◽  
Vol 57 (4) ◽  
pp. 471-478 ◽  
Author(s):  
D. Müller ◽  
B. Frank ◽  
R. Beckert ◽  
H. Görls

The easily available pyrido[1,2-a]pyrazines of type 1 are versatile building blocks for ring transformation reactions.W ith heterocyclic quinones such as quinoline-2,5,8-triones 4a-c, a highly regioselective [4+2]-cycloaddition reaction takes place in the first step, followed by a ring transformation cascade.T he 1,6-diazaanthracene-2,9,10-triones 5a-e, which possess an additional bipyridine substructure, could be isolated as main products.In order to modify the starting products of type 1, a metal-catalyzed cross-coupling reaction with acetylenic benzoic esters 9a,b has been performed.T he modified pyridopyrazines 10a,b which were obtained in good yields could be transformed by analogy to 1a,b into ring-fused heterocyclic quinones 12a,b.


2013 ◽  
Vol 85 (8) ◽  
pp. 1683-1692 ◽  
Author(s):  
Valeria Corne ◽  
María Celeste Botta ◽  
Enrique D. V. Giordano ◽  
Germán F. Giri ◽  
David F. Llompart ◽  
...  

Modern organic chemistry requires easily obtainable chiral building blocks that show high chemical versatility for their application in the synthesis of enantiopure compounds. Biomass has been demonstrated to be a widely available raw material that represents the only abundant source of renewable organic carbon. Through the pyrolitic conversion of cellulose or cellulose-containing materials it is possible to produce levoglucosenone, a highly functionalized chiral structure. This compound has been innovatively used as a template for the synthesis of key intermediates of biologically active products and for the preparation of chiral auxiliaries, catalysts, and organocatalysts for their application in asymmetric synthesis.


Sign in / Sign up

Export Citation Format

Share Document