Experimental Assessment of Effect of Backlash Control Parameters on Quadrant Protrusions of Circular Tests for CNC Machine Tools

2020 ◽  
Vol 19 (01) ◽  
pp. 65-85
Author(s):  
Chuan-Hsun Hsu ◽  
Chi-Hsiang Wang ◽  
Syh-Shiuh Yeh
Keyword(s):  
Machine Tool ◽  
Feed Rate ◽  
Machine Tools ◽  
Search Algorithm ◽  
Cnc Machine Tools ◽  
Control Parameters ◽  
Cnc Machine ◽  
Circular Test ◽  
Binary Search Algorithm ◽  
The Relationship

Backlash, friction, and servo lag factors often result in protrusion or segment difference phenomenon in the moving speed reversal of a machine tool’s moving table. This phenomenon can be improved by adjusting the backlash control parameters of the machine tool controller, but the control parameters must vary with the feed rate and payload of the moving table. Therefore, this study performed the circular test process for CNC machine tools, and used different feed rate, radius, and payload motion conditions to discuss the effect of backlash control parameters on quadrant protrusions. First, this study used parameter-range reduction combined with the Taguchi method and the binary search algorithm to search for the optimal backlash control parameters in the parameter setting range, so that the machine tool could have preferable quadrant protrusion performance when executing circular tests. Afterward, the correlation of the moving table feed rate, radius, and payload to the quadrant protrusion was analyzed according to the experimental results. The results indicated that the machine tool moving table feed rate had the most apparent effect on quadrant protrusions, and the relationship between the payload and quadrant protrusion was influenced by the moving table feed rate and circular radius simultaneously.

Modeling and Simulation for Feed Servo System in CNC Machine Tool

2012 ◽  
Vol 510 ◽  
pp. 345-349 ◽  
Author(s):  
Xue Jun Nie
Keyword(s):  
Machine Tool ◽  
Performance Optimization ◽  
Machine Tools ◽  
Transfer Functions ◽  
Servo System ◽  
Simulation Models ◽  
Cnc Machine Tools ◽  
Cnc Machine Tool ◽  
Cnc Machine ◽  
The Relationship

Feed servo system is an important part in CNC machine tool. In order to promote CNC machine tools precision, it is particularly important to enhance the control methods research on feed servo system. In this paper, different mathematical models of CNC machine tools feed servo system in different control modes are established, and their transfer functions are obtained, also the corresponding simulation models are constructed by using Simulink tools under MATLAB environment. Through simulating, the relationship between the systems parameters and the performance of servo system are obtained, some reliable theoretical basis can be achieved for improving and enhancing CNC machine tool servo system performance. Therefore some references for the performance optimization of feed servo system in CNC machine tool are provided.

Application of Ubiquitous Sensor Network in Collection and Analysis of CNC Machine Tool Processing Status Information

2010 ◽  
Vol 455 ◽  
pp. 621-624
Author(s):  
X. Li ◽  
Y.Y. Yu
Keyword(s):  
Machine Tool ◽  
Sensor Network ◽  
Machine Tools ◽  
Thermal Error ◽  
Development Trend ◽  
Cnc Machine Tools ◽  
Cnc Machine Tool ◽  
Cnc Machine ◽  
Status Information ◽  
The Development Trend

Because of the practical requirement of real-time collection and analysis of CNC machine tool processing status information, we discuss the necessity and feasibility of applying ubiquitous sensor network(USN) in CNC machine tools by analyzing the characteristics of ubiquitous sensor network and the development trend of CNC machine tools, and application of machine tool thermal error compensation based on USN is presented.

The Achievement of Intelligent Lubrication Adjustment Function of CNC Machine Tools Based on SSAS

2014 ◽  
Vol 556-562 ◽  
pp. 1454-1459
Author(s):  
Dong Sheng You
Keyword(s):  
Machine Tools ◽  
Sensor Data ◽  
Lubricating Oil ◽  
Cnc Machine Tools ◽  
Signal Acquisition ◽  
Cnc Machine ◽  
Lubrication Mode ◽  
Free Function ◽  
And Control ◽  
The Relationship

The use of CNC machine tools signal acquisition, two-way transmission of the temperature sensor data, the ladder design and macro program guide and other methods on the implementation of a temperature sensing system of smart lubrication function. It is not only low-end CNC machine tools can compensate for deficiencies in equipment protection features and maintenance-free function, but also enhance the diversity of processing. Ultimately by analyzing the different lubrication mode, the relationship between the lubricating oil pressure and temperature and other factors, to draw the function in the lubrication in a stabilizing effect on oil pressure and control bearings and nut seat temperature. It is simple and practical, has important theoretical significance and great value.

scholarly journals On the Application of Impeller in Multi Axis CNC Machine Tools

2021 ◽  
Vol 2066 (1) ◽  
pp. 012113
Author(s):  
Weiwen Ye
Keyword(s):  
Machine Tool ◽  
Machine Tools ◽  
Complex Surface ◽  
Machining Process ◽  
Cnc Machine Tools ◽  
Cnc Machine Tool ◽  
Cnc Machine ◽  
Surface Processing ◽  
The Third ◽  
Machining Characteristics

Abstract Multi axis CNC machine tool has good linkage processing effect. Through the application of integral impeller in CNC machine tools, to improve the adaptability of CNC machine tools to complex surface processing parts, to improve the accuracy of multi axis CNC machine tools. The first part of this paper introduces the integral impeller and its machining characteristics; the second part introduces the basic NC machining process of integral impeller; the third part discusses the application of impeller in multi axis CNC machine tools from the creation of guide track, the simulation of integral impeller, software processing and generation. The purpose is to provide some reference for the processing and production of integral impeller.

CNC Machine Tools

2009 ◽  
pp. 165-187 ◽  
Author(s):  
Xun Xu
Keyword(s):  
Machine Tool ◽  
Machine Tools ◽  
Manufacturing Industry ◽  
Human Action ◽  
Cnc Machining ◽  
Cnc Machine Tools ◽  
Cnc Machine Tool ◽  
Cnc Machine ◽  
Cnc Machines ◽  
Time Required

The introduction of CNC machines has radically changed the manufacturing industry. Curves are as easy to cut as straight lines, complex 3-D structures are relatively easy to produce, and the number of machining steps that required human action has dramatically reduced. With the increased automation of manufacturing processes with CNC machining, considerable improvements in consistency and quality can be achieved. CNC automation reduced the frequency of errors and provided CNC operators with time to perform additional tasks. CNC automation also allows for more flexibility in the way parts are held in the manufacturing process and the time required to change the machine to produce different components. In a production environment, a series of CNC machines may be combined into one station, commonly called a “cell”, to progressively machine a part requiring several operations. CNC controller is the “brain” of a CNC machine, whereas the physical configuration of the machine tool is the “skeleton”. A thorough understanding of the physical configuration of a machine tool is always a priority for a CNC programmer as well as the CNC machine tool manufacturers. This chapter starts with a historical perspective of CNC machine tools. Two typical types of CNC machine tools (i.e. vertical and horizontal machining centres) are first discussed. Tooling systems for a CNC machine tool are integral part of a CNC system and are therefore elaborated. Also discussed are the four principal elements of a CNC machine tool. They are machine base, machine spindle, spindle drive, and slide drive. What letter should be assigned to a linear or rotary axis and what if a machine tool has two sets of linear axes? These questions are answered later in the chapter. In order for readers to better comprehend the axis and motion designations, a number of machine tool schematics are given.

Mathematical Approach for Geometric Error Modeling of Three Axis CNC Vertical Milling Machine

2016 ◽  
Vol 842 ◽  
pp. 303-310 ◽  
Author(s):  
Widyanti Kwintarini ◽  
Agung Wibowo ◽  
Yatna Yuwana Martawirya
Keyword(s):  
Machine Tool ◽  
Machine Tools ◽  
Machining Process ◽  
Cnc Machine Tools ◽  
Milling Machine ◽  
Cnc Machine ◽  
Geometrical Errors ◽  
Vertical Milling ◽  
Vertical Milling Machine ◽  
Accuracy And Repeatability

The aim of this paper overviews about to find out the errors that come from three axis CNC vertical milling machine. The errors come from, the CNC milling machine can be modelled into mathematical models and later on these error models will be used to analyse the errors in the measured data. Many errors from CNC machine tools have given significant effects toward the accuracy and repeatability of manufacturing process. There are two error sources come from CNC machine tools such as tool deflection and thermal distortions of machine tool structure. These errors later on will contribute to result in the geometrical deviations of moving axis in CNC vertical milling machine. Geometrical deviations of moving axis such as linear positioning errors, roll, pitch and yaw can be designated as volumetric errors in three axis machine tool. Geometrical deviations of moving axises happen at every axis in three axis CNC vertical milling machine. Geometrical deviations of moving axises in linear and angular movement has the amount of errors up to twenty one errors. Moreover, this geometrical errors play the major role in the total amount of errors and for that particular reason extra attention towards the geometrical deviation errors will be needed along machining process. Each of geometrical error of three axes vertical machining center is modeled using a homogeneous transformation matrix (HTM). The developed mathematical model is used to calculate geometrical errors at each axis and to predict the resultant error vector at the interface of machine tool and workpiece for error compensation.

Non-Contact Measuring Modeling and Simulation of CNC Machine Tools under High Feed Rate Condition

2007 ◽  
Vol 10-12 ◽  
pp. 621-625
Author(s):  
X.S. Wang ◽  
Jian Guo Yang
Keyword(s):  
Feed Rate ◽  
Machine Tools ◽  
Laser Interferometer ◽  
Measurement Model ◽  
Cnc Machine Tools ◽  
Cnc Machine ◽  
Rate Condition ◽  
High Feed Rate ◽  
High Feed ◽  
Measurement Principle

This article sets forth a new precision measurement method of CNC machine tools. The method incorporates the laser interferometer and the measurement principle of the double ball bar (DBB), and can measure the machine tool precision under the high feed rate condition. The generalized measurement model of three-axis has been built. Data analysis software is developed to simulate the run condition of machine tools. The repeatable experiment results proves that the method is feasible and its precision is higher than DBB`s.

Research on High Performance Direct-Driving Motor Applied to Swivel Spindle Head

2014 ◽  
Vol 701-702 ◽  
pp. 874-878
Author(s):  
Shao Hsien Chen ◽  
Chin Mou Hsu ◽  
Kuo Lin Chiu ◽  
Chu Peng Chan
Keyword(s):  
Renewable Energy ◽  
Machine Tool ◽  
Machine Tools ◽  
High Performance ◽  
Cnc Machine Tools ◽  
Cnc Machine ◽  
Positional Accuracy ◽  
Maximum Torque ◽  
Five Axis

Swivel spindle head is a key component used in five-axis machine tool of high performance and is of great importance in application and design. Nowadays, more and more components are manufactured by high performance multi-axis CNC machine tools, such as components of spaceflight, renewable energy and automobile, etc. Therefore, high performance machine tools of multiple axes are more and more urgently demanded, while Swivel spindle head is one of the most important components for a multi-axis machine tool. Hence, Swivel spindle head is one of the key to developers multi-axis machine tool . The study explores the highly responsive direct-driving motor able to drive the spindle head to rotate with multi-driving rotary technology. The dual-driving motor rotates via multi-driving units, generates torsion that magnifies and eliminates its clearance, and then drives the spindle head to rotate. Results of the test show that the completed machine tool can meet the standards of dual axis rotary head with high preformation in, no matter, speed, distance, positional accuracy, repeated accuracy or maximum torque, etc.

Sign in / Sign up

Export Citation Format

Share Document