Zinc phthalocyanine-nicotinamide complexes: evidence of their formation by using spectral studies

2007 ◽  
Vol 11 (11) ◽  
pp. 773-783
Author(s):  
Roberta Del Sole ◽  
M. Rosaria Lazzoi ◽  
Agnese De Luca ◽  
Giuseppe Vasapollo

Spectral studies and job plot analyses which provide evidence of the formation of complexes of zinc phthalocyanines or zinc naphthalocyanines and nicotinamide or its positional isomers, known as isonicotinamide and picolinamide, are reported. Nicotinamide, isonicotinamide and picolinamide contain the amide group in a different position in the ring and these molecules can coordinate the metal of phthalocyanines through their nitrogen pyridinic atom, or their amide group, to form complexes. FT-IR and NMR spectroscopic studies, as well as job plot analyses in chloroform, have been performed. To validate the formation of complexes, some of them have been isolated, fully characterized and their binding properties and thermal stability have also been investigated.

2016 ◽  
Vol 13 (2) ◽  
pp. 95-104
Author(s):  
Baghdad Science Journal

New azo ligand 2-((4-formyl-3-hydroxynaphthalen-2-yl) diazenyl) benzoic acid (H2L) was synthesized from the reaction of 2-aminobenzoic acid and2-hydroxy-1-naphthaldehyde. Monomeric complexes of this ligand, of general formulae [MII(L)(H2O)] with (MII = Mn, Co, Ni, Cu, Zn, Pd, Cd and Hg ) were reported. The compounds were isolated and characterized in solid state by using 1H-NMR, FT-IR, UV–Vis and mass spectral studies, elemental microanalysis, metal content, magnetic moment measurements, molar conductance and chloride containing. These studies revealed tetrahedral geometries for all complexes except PdII complex is Square planar. The study of complexes formation via molar ratio of (M:L) as (1:1). Theoretical treatments of compounds in gas phase were studied using Hyper Chem-8 program has.


2021 ◽  
Vol 12 (2) ◽  
pp. 96-103
Author(s):  
E.T. Omotade ◽  
A.P. Oviawe

The mixed ligand complexes involving Fe(II), Co(II) and Ni(II) ions, Schiff base 4 phenylpyrazal-5-one (L1) and L-lysine (Lys) were synthesized. The complexes were characterized on the basis of their elemental analysis, conductivity measurements, FT-IR, MS,1H-NMR and 13C-NMR spectral studies. All the synthesized complexes were subjected to simultaneous thermogravimetric analysis to study their decomposition mechanism and thermal stability. The mixed ligand complexes were screened against some strains of bacteria and fungi to study their antimicrobial activity. The complexes were found to be non-electrolytes and possessed octahedral geometry. The results showed that the metal complexes possessed better antimicrobial activity than the free ligands.


Catalysts ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 824
Author(s):  
Przemysław J. Jodłowski ◽  
Izabela Czekaj ◽  
Patrycja Stachurska ◽  
Łukasz Kuterasiński ◽  
Lucjan Chmielarz ◽  
...  

The objective of our study was to prepare Y-, USY- and ZSM-5-based catalysts by hydrothermal synthesis, followed by copper active-phase deposition by either conventional ion-exchange or ultrasonic irradiation. The resulting materials were characterized by XRD, BET, SEM, TEM, Raman, UV-Vis, monitoring ammonia and nitrogen oxide sorption by FT-IR and Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS). XRD data confirmed the purity and structure of the Y/USY or ZSM-5 zeolites. The nitrogen and ammonia sorption results indicated that the materials were highly porous and acidic. The metallic active phase was found in the form of cations in ion-exchanged zeolites and in the form of nanoparticle metal oxides in sonochemically prepared catalysts. The latter showed full activity and high stability in the SCR deNOx reaction. The faujasite-based catalysts were fully active at 200–400 °C, whereas the ZSM-5-based catalysts reached 100% activity at 400–500 °C. Our in situ DRIFTS experiments revealed that Cu–O(NO) and Cu–NH3 were intermediates, also indicating the role of Brønsted sites in the formation of NH4NO3. Furthermore, the results from our experimental in situ spectroscopic studies were compared with DFT models. Overall, our findings suggest two possible mechanisms for the deNOx reaction, depending on the method of catalyst preparation (i.e., conventional ion-exchange vs. ultrasonic irradiation).


2012 ◽  
Vol 557-559 ◽  
pp. 1152-1156
Author(s):  
Yan Zhou ◽  
Fu Wei Huang ◽  
Fa Rong Huang ◽  
Lei Du

Modified silicon-containing arylacetylene resins (DMSEPE-OMPS) were prepared from poly(dimethylsilyleneethynylenephenyleneethynylene) (DMSEPE) and Octa(maleimidophenyl)- silsesquioxane (OMPS). The curing reaction of DMSEPE-OMPS resin was studied by FT-IR and DSC techniques. Thermal stability and dielectric properties of cured DMSEPE-OMPS resins were determined. FT-IR and DSC analyses indicate that thermal polymerization of DMSEPE-OMPS resin occurs in the curing process. Thermal stabilities of cured DMSEPE-OMPS resins under N2 and air atmosphere decrease gradually with the increment of OMPS components. The incorporation of OMPS can obviously reduce dielectric constant of DMSEPE-OMPS resins.


2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
S. Nagashree ◽  
P. Mallu ◽  
L. Mallesha ◽  
S. Bindya

A series of methyl-2-aminopyridine-4-carboxylate derivatives,3a–f,were synthesized in order to determine theirin vitroantimicrobial activity. The chemical structures of the synthesized compounds were confirmed by elemental analyses, FT-IR, and1H NMR spectral studies. Among the synthesized compounds,3cand3dshowed good antimicrobial activity compared to other compounds in the series.


2021 ◽  
Author(s):  
Hongying Chu ◽  
Huabei Li ◽  
Xiaoyan Sun ◽  
Yaowang Zhang

Abstract In this paper, we synthesized a kind of bio-based plasticizer epoxidized linoleic acid cardanol ester(ELCE) from cardanol and linoleic acid. Its chemical structure was characterized with FT-IR and 1H NMR. Polyvinyl chloride(PVC) blends plasticized with ELCE were prepared via thermoplastic blending with torque rheometer. The performance including torque, mechanical property, thermal stability, plasticizing property and migration resistance of plasticized PVC blends were investigated and compared with plasticized PVC blends with commercial plasticizer dioctyl phthalate(DOP). The results showed that ELCE improved thermal stability of PVC blends. ELCE played more excellent plasticizing effect on PVC blends than DOP. The better solvent extraction resistance and volatile resistance of ELCE make it impossible to completely replace DOP in PVC products.


2018 ◽  
Vol 9 (1) ◽  
pp. 39-49 ◽  
Author(s):  
Sharifah Nurul Ain Syed Hashim ◽  
Sarani Zakaria ◽  
Chin Hua Chia ◽  
Sharifah Nabihah Syed Jaafar

In this study, soda alkali lignin from oil palm empty fruit bunch (EFB-AL) and kenaf core (KC-AL) are esterified with maleic anhydride under two different conditions, namely i) pyridine at temperature of 120°C for 3h and ii) aqueous alkaline solution at room temperature for 4h. As a result, the weight percentage gain (WPG) of the esterified EFB-AL (EFB-EL) and esterified KC-AL (KC-EL) in pyridine demonstrated a higher compared to aqueous alkaline solution. The FT-IR results of EFB-EL and KC-EL in both solvents exhibited some changes at the carbonyl and hydroxyl groups. Furthermore, the esterification process induced the carboxylic peak to appear in both alkali lignin samples. The outcome is confirmed by conducting H-NMR analysis, which demonstrated ester and carboxylic acid peaks within the spectral analysis. Finally, the TGA results showed both EFB-EL and KC-EL that are exposed to aqueous alkaline actually possessed better thermal stability and higher activation energy (Ea) compared to the esterified samples in pyridine.


Sign in / Sign up

Export Citation Format

Share Document