An Investigation of Vector Intensity Measures for Seismic Collapse Assessment Under Far-Field Aftershocks

2020 ◽  
pp. 2150004
Author(s):  
F. Soleiman Meigooni ◽  
M. Tehranizadeh
Keyword(s):  
Seismic Response ◽  
Time History ◽  
Considerable Effect ◽  
Far Field ◽  
Spectral Acceleration ◽  
Intensity Measures ◽  
Rc Frames ◽  
Seismic Collapse ◽  
Collapse Assessment

Aftershock records have a considerable effect on the results of collapse assessments conducted on buildings. Thus, they should be selected cautiously. As the number of recorded aftershocks is not sufficient, mainshock records are often utilized instead. In order to increase the correlation between the aftershock time history and the seismic response of a structure, this research intends to investigate several Intensity Measures (IMs). For this study, three RC frames were considered. Forty-four far-field records from FEMAP-695 were selected as main and aftershock. Each building analysis was conducted under 44 mainshock–aftershock chains. According to the results, use of the summation of the first mode spectral acceleration value of aftershocks as the second part of a vector IM can lead to the sufficiency of the IM.

Investigation of Damages in RC Frames Under Near Field Earthquakes Using a Damage Index

2016 ◽  
Vol 16 (02) ◽  
pp. 1450094 ◽  
Author(s):  
Seyed Morteza Zinati Yazdi ◽  
Mohammad Taghi Kazemi
Keyword(s):  
Near Field ◽  
Damage Index ◽  
Time History ◽  
General Rule ◽  
Nonlinear Time History Analysis ◽  
Far Field ◽  
Moment Frames ◽  
Moment Frame ◽  
Rc Frames ◽  
Nonlinear Time History

Heavy damages on structures caused by near field earthquakes in recent years has brought serious attention to this problem. An examination of previous records has shown significant differences for near field earthquakes, including a large energy pulse, unlike far field earthquakes. But as a general rule, the effects of near field earthquakes have been ignored in most building codes. The purpose of this paper is to investigate the effect of near field earthquakes on reinforced concrete (RC) moment frames. To achieve this goal, the Erduran damage index, an efficient way to calculate damage, was employed to analyze two 4- and 8-story RC moment frame buildings. The buildings with moderate and high ductility were designed by the strength criteria. Seven pairs of near field and far field earthquakes were scaled and used for dynamic nonlinear time history analysis. Using Erduran’s beam and column damage index, respectively, based on rotation and drift, the results from both near and far field earthquakes were compared. Moreover, for better assessment, 4-story buildings were evaluated from the performance based viewpoint of design. We observe from the results that most of the components of the structures under near field earthquakes sustained severe damages and in some cases even component failure. Components of the structures under near field earthquakes suffered from 30% more of damage, on average, than that under far field earthquakes.

scholarly journals Effect of Flexibility Ratio on Seismic Response of Cut-and-Cover Box Tunnel

2019 ◽  
Vol 2019 ◽  
pp. 1-16 ◽  
Author(s):  
Shamsher Sadiq ◽  
Quang van Nguyen ◽  
Hyunil Jung ◽  
Duhee Park
Keyword(s):  
Finite Element ◽  
Shear Stress ◽  
Seismic Response ◽  
Linear Time ◽  
Time History ◽  
Tunnel Lining ◽  
Spectral Acceleration ◽  
Centrifuge Tests ◽  
Wide Range ◽  
Soil Interface

Equivalent linear time history analyses are conducted to calculate the seismic response of various types of cut-and-cover single box tunnels. A finite-element numerical model is calibrated against the results of centrifuge tests. The calculated tunnel responses compare favourably with the measurements. A validated model is then used to quantify the seismic response of box tunnels. The flexibility ratio (F) is illustrated to have a governing influence on the tunnel response. It is shown that the previously developed relationship between F and the racking ratio (R) is applicable for a wide range of F up to 20. It is also shown that an increase in F accompanies corresponding increase in R, the spectral acceleration in the tunnel lining, and the shear stress along the tunnel lining-soil interface. The thrust in the tunnel lining is also revealed to increase with F, although the calculated value is significantly lower than the pressure on yielding walls. Additionally, the surface settlement is shown to increase with an increase in F.

Concentrated plasticity modelling of RC frames in time-history analyses

2021 ◽  
Vol 243 ◽  
pp. 112716
Author(s):  
Eleonora Bruschi ◽  
Paolo M. Calvi ◽  
Virginio Quaglini
Keyword(s):  
Time History ◽  
Rc Frames

scholarly journals Investigating the Use of Natural and Artificial Records for Prediction of Seismic Response of Regular and Irregular RC Bridges Considering Displacement Directions

2021 ◽  
Vol 11 (3) ◽  
pp. 906
Author(s):  
Payam Tehrani ◽  
Denis Mitchell
Keyword(s):  
Seismic Response ◽  
Radial Displacement ◽  
Time History ◽  
Good Prediction ◽  
3D Analysis ◽  
Combination Rules ◽  
Principal Axes ◽  
Artificial Records ◽  
The Mean ◽  
Irregular Bridges

The seismic responses of continuous multi-span reinforced concrete (RC) bridges were predicted using inelastic time history analyses (ITHA) and incremental dynamic analysis (IDA). Some important issues in ITHA were studied in this research, including: the effects of using artificial and natural records on predictions of the mean seismic demands, effects of displacement directions on predictions of the mean seismic response, the use of 2D analysis with combination rules for prediction of the response obtained using 3D analysis, and prediction of the maximum radial displacement demands compared to the displacements obtained along the principal axes of the bridges. In addition, IDA was conducted and predictions were obtained at different damage states. These issues were investigated for the case of regular and irregular bridges using three different sets of natural and artificial records. The results indicated that the use of natural and artificial records typically resulted in similar predictions for the cases studied. The effect of displacement direction was important in predicting the mean seismic response. It was shown that 2D analyses with the combination rules resulted in good predictions of the radial displacement demands obtained from 3D analyses. The use of artificial records in IDA resulted in good prediction of the median collapse capacity.

scholarly journals Seismic Response of RC Frames with a Soft First Story Retrofitted with Hysteretic Dampers under Near-Fault Earthquakes

2021 ◽  
Vol 11 (3) ◽  
pp. 1290
Author(s):  
Santiago Mota-Páez ◽  
David Escolano-Margarit ◽  
Amadeo Benavent-Climent
Keyword(s):  
Cost Effective ◽  
Far Field ◽  
Soft Story ◽  
Near Fault ◽  
Rc Frames ◽  
Story Drift ◽  
Number Of Cycles ◽  
Rc Frame Structures ◽  
Near Fault Earthquakes ◽  
Hysteretic Dampers

Reinforced concrete (RC) frame structures with open first stories and masonry infill walls at the upper stories are very common in seismic areas. Under strong earthquakes, most of the energy dissipation demand imposed by the earthquake concentrates in the first story, and this eventually leads the building to collapse. A very efficient and cost-effective solution for the seismic upgrading of this type of structure consists of installing hysteretic dampers in the first story. This paper investigates the response of RC soft-story frames retrofitted with hysteretic dampers subjected to near-fault ground motions in terms of maximum displacements and lateral seismic forces and compares them with those obtained by far-field earthquakes. It is found that for similar levels of total seismic input energy, the maximum displacements in the first story caused by near-fault earthquakes are about 1.3 times larger than those under far-field earthquakes, while the maximum inter-story drift in the upper stories and the distribution and values of the lateral forces are scarcely affected. It is concluded that the maximum displacements can be easily predicted from the energy balance of the structure by using appropriate values for the parameter that reflects the influence of the impulsivity of the ground motion: the so-called equivalent number of cycles.

scholarly journals Numerical Study of the Seismic Response of an Instrumented Building with Underground Stories

2021 ◽  
Vol 11 (7) ◽  
pp. 3190
Author(s):  
Edmundo Schanze ◽  
Gilberto Leiva ◽  
Miguel Gómez ◽  
Alvaro Lopez
Keyword(s):  
Seismic Response ◽  
Soil Structure ◽  
Numerical Study ◽  
Time History ◽  
Building Design ◽  
Average Height ◽  
The Real ◽  
Vibration Data ◽  
Finite Element Software ◽  
Stiffness Reduction

Engineering practitioners do not usually include soil–structure interactions in building design; rather, it is common to model and design foundations as embedded joints with joint–based reactions. In some cases, foundation structures are modeled as rigid bodies, embedding the first story into lower vertical elements. Given that the effects of underground floors on the seismic response are not generally included in current building design provisions, it has been little explored in the literature. This work compares and analyzes models to study the effects of different underground stories modeling approaches using earthquake vibration data recorded for the 16–story Alcazar building office in downtown Viña del Mar (Chile). The modeling expands beyond an embedded first story structure to soil with equivalent springs, representing soil–structure interaction (SSI), with varying rigid soil homogeneity. The building was modeled in a finite element software considering only dead load as a static load case because the structure remained in the framing stage when the monitoring system was operating. The instruments registered 72 aftershocks from the 2010 Maule Earthquake, and this study focused on 11 aftershocks of different hypocenters and magnitudes to collect representative information. The comparisons between empirical records and models in this study showed a better fit between the model and the real vibration data for the models that do consider the SSI using horizontal springs attached to the retaining walls of the underground stories. In addition, it was observed that applying a stiffness reduction factor of 0.7 to all elements in deformation verification models for average–height buildings was suitable to analyze the behavior under small earthquakes; better results are obtained embedding the structure in the foundation level than embedding in the street level; the use of horizontal springs with Kuesel’s model with traction for the analysis of the structure yields appropriate results; it is necessary to carefully select the spring constants to be used, paying special attention to the vertical springs. Even though the results presented herein indicate that the use of vertical springs to simulate the SSI of the base slab can result in major differences concerning the real response, it is necessary to obtain more data from instrumentation across a wider variety of structures to continue to evaluate better design and modeling practices. Similarly, further analyses, including nonlinear time–history and high–intensity events, are needed to best regulate building design.

Nonlinear Dynamic Analysis of the Damping Frame Structure System

2012 ◽  
Vol 594-597 ◽  
pp. 886-890 ◽  
Author(s):  
Gan Hong ◽  
Mei Li ◽  
Yi Zhen Yang
Keyword(s):  
Energy Dissipation ◽  
Seismic Response ◽  
Nonlinear Dynamic ◽  
Time History ◽  
Time History Analysis ◽  
Frame Structure ◽  
Force Model ◽  
Operating Characteristics ◽  
Restoring Force ◽  
History Analysis

Abstract. In the paper, take full account of energy dissipation operating characteristics. Interlayer shear-frame structure for the analysis of the Wilson-Θmethod ELASTOPLASTIC schedule, the design of a nonlinear dynamic time history analysis procedure. On this basis, taking into account the restoring force characteristics of the energy dissipation system, the inflection point in the restoring force model treatment, to avoid a result of the calculation results of distortion due to the iterative error. A frame structure seismic response time history analysis results show that: the framework of the energy dissipation significantly lower than the seismic response of the common framework, and its role in the earthquake when more significant.

Sign in / Sign up

Export Citation Format

Share Document