scholarly journals Investigating the Use of Natural and Artificial Records for Prediction of Seismic Response of Regular and Irregular RC Bridges Considering Displacement Directions

2021 ◽  
Vol 11 (3) ◽  
pp. 906
Author(s):  
Payam Tehrani ◽  
Denis Mitchell
Keyword(s):  
Seismic Response ◽  
Radial Displacement ◽  
Time History ◽  
Good Prediction ◽  
3D Analysis ◽  
Combination Rules ◽  
Principal Axes ◽  
Artificial Records ◽  
The Mean ◽  
Irregular Bridges

The seismic responses of continuous multi-span reinforced concrete (RC) bridges were predicted using inelastic time history analyses (ITHA) and incremental dynamic analysis (IDA). Some important issues in ITHA were studied in this research, including: the effects of using artificial and natural records on predictions of the mean seismic demands, effects of displacement directions on predictions of the mean seismic response, the use of 2D analysis with combination rules for prediction of the response obtained using 3D analysis, and prediction of the maximum radial displacement demands compared to the displacements obtained along the principal axes of the bridges. In addition, IDA was conducted and predictions were obtained at different damage states. These issues were investigated for the case of regular and irregular bridges using three different sets of natural and artificial records. The results indicated that the use of natural and artificial records typically resulted in similar predictions for the cases studied. The effect of displacement direction was important in predicting the mean seismic response. It was shown that 2D analyses with the combination rules resulted in good predictions of the radial displacement demands obtained from 3D analyses. The use of artificial records in IDA resulted in good prediction of the median collapse capacity.

Stiffness Design for Specified Nonexceedance Probability of Seismic Response

1998 ◽  
Vol 14 (1) ◽  
pp. 165-188 ◽  
Author(s):  
Yutaka Nakamura ◽  
Tsuneyoshi Nakamura
Keyword(s):  
Monte Carlo Simulation ◽  
Monte Carlo ◽  
Seismic Response ◽  
Amplification Factor ◽  
Design Method ◽  
Response Spectrum ◽  
Time History ◽  
Stiffness Design ◽  
The Mean ◽  
Shear Building

A direct procedure is presented for generating a response spectrum for an arbitrary nonexceedance probability from a prescribed design mean response spectrum. An amplification factor is derived to estimate the maximum response values of an MDOF system for a nonexceedance probability from the mean maximum ones. An efficient stiffness design method for a shear building is developed with the use of its fundamental frequency and translational eigenvector as parameters for adjusting the nonexceedance probability of the seismic drifts to the specified value. The validity and accuracy of the proposed method are demonstrated by a Monte Carlo simulation together with time-history analyses.

Investigating the effects of combinations of irregularities on seismic ductility demands and mean response for four-span RC bridges considering displacement direction

2021 ◽  
Vol 16 (2-3) ◽  
pp. 105-117
Author(s):  
Mohsen Sajed ◽  
Payam Tehrani
Keyword(s):  
Time History ◽  
The Past ◽  
History Analysis ◽  
Different Types ◽  
Displacement Direction ◽  
The Mean ◽  
Support Conditions ◽  
Irregular Bridges ◽  
Ground Motion Records ◽  
The Impact

The effects of combinations of different types of irregularities have not been studied in details in the past and current seismic design codes do not address this issue appropriately. In this research, 76 regular and irregular bridges with irregularities in both superstructure and substructure were designed and evaluated to investigate the impact of combinations of irregularities on the seismic ductility demands. The irregularity parameters considered in this study include irregularities in span arrangement, different lengths of columns, different abutments support conditions and different stiffness of superstructure. The bridges were designed and checked according to AASHTO provisions. Inelastic time history analysis was conducted using OpenSees software and ductility demands in bridge columns for different bridge configurations were predicted. Predictions of ductility demands were based on the mean responses obtained using a number of ground motion records. Finally, the effect of considering displacement directions in predicting the mean bridge response (i.e., using different methods for predicting the mean response) for irregular and regular bridges was investigated. The results indicate that the combinations of irregularities can significantly increase the ductility demands in some cases compared to the case of regular bridges.

Critical Seismic Response Analysis of Skew Bridges

2014 ◽  
Vol 488-489 ◽  
pp. 394-397
Author(s):  
Ming Qi Lu ◽  
Shao Qin Guo
Keyword(s):  
Seismic Response ◽  
Ground Motion ◽  
Seismic Vulnerability ◽  
Time History ◽  
Response Analysis ◽  
Skew Angle ◽  
Combination Rules ◽  
Skew Bridge ◽  
Seismic Force ◽  
Skew Bridges

The complexity of seismic response for skew bridge rises higher seismic-vulnerability relatively in comparison with right bridge. One of the parameters that directly affects the seismic response on a skew bridge is the excitation angle of the ground motion [. This paper investigates the effects of seismic force direction on the responses of skew bridges without considering impact effect in time history nonlinear dynamic analyses. The combination rules for orthogonal earthquake effects, such as the 100/ 30, 100/40 percentage rules and the SRSS method are also examined. It is concluded that the angle of excitation that produces the critical responses depends both on the ground motion and bridge characteristics, and the three combination rules are all relatively conservative, a new formula which considers the influence of skew angle and excitation angle of the ground motion is suggested.

scholarly journals Accuracy of cup placement in total hip arthroplasty by means of a mechanical positioning device: a comprehensive cadaveric 3d analysis of 16 specimens

2019 ◽  
pp. 112070001987482
Author(s):  
Arthur J Kievit ◽  
Johannes G G Dobbe ◽  
Wouter H Mallee ◽  
Leendert Blankevoort ◽  
Geert J Streekstra ◽  
...  
Keyword(s):  
3D Models ◽  
Safe Zone ◽  
3D Analysis ◽  
Anterior Pelvic Plane ◽  
Mechanical Device ◽  
Acetabular Cup ◽  
Anteversion Angle ◽  
Positioning Device ◽  
The Mean ◽  
Safe Zones

Introduction: We tested whether a mechanical device (such as Hipsecure) to pinpoint the anterior pelvic plane (APP) as a guide can improve acetabular cup placement. To assess accuracy we asked: (1) is the APP an effective guide to position acetabular cup placement within acceptable ° of divergence from the optimal 40° inclination and 15° anteversion; (2) could a mechanical device increase the number of acetabular cup placements within Lewinnek’s safe zone (i.e. inclination 30° to 50°; anteversion 5° to 25°)? Methods: 16 cadaveric specimens were used to assess the 3D surgical success of using a mechanical device APP to guide acetabular cup placement along the APP. We used the Hipsecure mechanical device to implant acetabular cups at 40° inclination and 15° anteversion. Subequently, all cadaveric specimens with implants were scanned with a CT and 3D models were created of the pelvis and acetabular cups to assess the outcome in terms of Lewinnek’s safe zones. Results: The mean inclination of the 16 implants was 40.6° (95% CI, 37.7–43.4) and the mean anteversion angle was 13.4° (95% CI, 10.7–16.1). All 16 cup placements were within Lewinnek’s safe zone for inclination (between 30° and 50°) and all but 2 were within Lewinnek’s safe zone for anteversion (between 5° and 25°). Conclusion: In cadaveric specimens, the use of a mechanical device and the APP as a guide for acetabular cup placement resulted in good positioning with respect to both of Lewinnek’s safe zones.

scholarly journals Numerical Study of the Seismic Response of an Instrumented Building with Underground Stories

2021 ◽  
Vol 11 (7) ◽  
pp. 3190
Author(s):  
Edmundo Schanze ◽  
Gilberto Leiva ◽  
Miguel Gómez ◽  
Alvaro Lopez
Keyword(s):  
Seismic Response ◽  
Soil Structure ◽  
Numerical Study ◽  
Time History ◽  
Building Design ◽  
Average Height ◽  
The Real ◽  
Vibration Data ◽  
Finite Element Software ◽  
Stiffness Reduction

Engineering practitioners do not usually include soil–structure interactions in building design; rather, it is common to model and design foundations as embedded joints with joint–based reactions. In some cases, foundation structures are modeled as rigid bodies, embedding the first story into lower vertical elements. Given that the effects of underground floors on the seismic response are not generally included in current building design provisions, it has been little explored in the literature. This work compares and analyzes models to study the effects of different underground stories modeling approaches using earthquake vibration data recorded for the 16–story Alcazar building office in downtown Viña del Mar (Chile). The modeling expands beyond an embedded first story structure to soil with equivalent springs, representing soil–structure interaction (SSI), with varying rigid soil homogeneity. The building was modeled in a finite element software considering only dead load as a static load case because the structure remained in the framing stage when the monitoring system was operating. The instruments registered 72 aftershocks from the 2010 Maule Earthquake, and this study focused on 11 aftershocks of different hypocenters and magnitudes to collect representative information. The comparisons between empirical records and models in this study showed a better fit between the model and the real vibration data for the models that do consider the SSI using horizontal springs attached to the retaining walls of the underground stories. In addition, it was observed that applying a stiffness reduction factor of 0.7 to all elements in deformation verification models for average–height buildings was suitable to analyze the behavior under small earthquakes; better results are obtained embedding the structure in the foundation level than embedding in the street level; the use of horizontal springs with Kuesel’s model with traction for the analysis of the structure yields appropriate results; it is necessary to carefully select the spring constants to be used, paying special attention to the vertical springs. Even though the results presented herein indicate that the use of vertical springs to simulate the SSI of the base slab can result in major differences concerning the real response, it is necessary to obtain more data from instrumentation across a wider variety of structures to continue to evaluate better design and modeling practices. Similarly, further analyses, including nonlinear time–history and high–intensity events, are needed to best regulate building design.

Stationary and Transient Response of Cylindrical Shells Under Random Excitation

1988 ◽  
Vol 110 (2) ◽  
pp. 205-209
Author(s):  
A. V. Singh
Keyword(s):  
Transient Response ◽  
Random Vibration ◽  
Time History ◽  
Wide Band ◽  
Random Excitation ◽  
Mode Shapes ◽  
The Finite Element Method ◽  
History Of ◽  
The Mean ◽  
Random Vibration Analysis

This paper presents the random vibration analysis of a simply supported cylindrical shell under a ring load which is uniform around the circumference. The time history of the excitation is assumed to be a stationary wide-band random process. The finite element method and the condition of symmetry along the length of the cylinder are used to calculate the natural frequencies and associated mode shapes. Maximum values of the mean square displacements and velocities occur at the point of application of the load. It is seen that the transient response of the shell under wide band stationary excitation is nonstationary in the initial stages and approaches the stationary solution for large value of time.

Nonlinear Dynamic Analysis of the Damping Frame Structure System

2012 ◽  
Vol 594-597 ◽  
pp. 886-890 ◽  
Author(s):  
Gan Hong ◽  
Mei Li ◽  
Yi Zhen Yang
Keyword(s):  
Energy Dissipation ◽  
Seismic Response ◽  
Nonlinear Dynamic ◽  
Time History ◽  
Time History Analysis ◽  
Frame Structure ◽  
Force Model ◽  
Operating Characteristics ◽  
Restoring Force ◽  
History Analysis

Abstract. In the paper, take full account of energy dissipation operating characteristics. Interlayer shear-frame structure for the analysis of the Wilson-Θmethod ELASTOPLASTIC schedule, the design of a nonlinear dynamic time history analysis procedure. On this basis, taking into account the restoring force characteristics of the energy dissipation system, the inflection point in the restoring force model treatment, to avoid a result of the calculation results of distortion due to the iterative error. A frame structure seismic response time history analysis results show that: the framework of the energy dissipation significantly lower than the seismic response of the common framework, and its role in the earthquake when more significant.

A Development of the Visco-Elastic Damper for Timber Structure and a Suggestion of the Technological Design Assistance System

2013 ◽  
Vol 778 ◽  
pp. 714-721
Author(s):  
Katsuhiko Kohara ◽  
Takeshi Nomura ◽  
Kazuyoshi Koumoto
Keyword(s):  
Seismic Response ◽  
Elastic Body ◽  
Structural Model ◽  
Time History ◽  
Timber Structure ◽  
Response Analysis ◽  
Frame Design ◽  
Timber Frame ◽  
Loading Tests ◽  
Controlled Structure

Our research team developed a brace type and an angle brace type of the visco-elastic damper on seismic-response controlled structure for timber structure. We performed various dependence evaluations by the materials examination of the styrene olefin-based visco-elastic body which we developed newly. We made a structural model using the performance that loading tests in timber frame. We inspected the validity of the structural model. In addition, we built a technical support system for damper setting by the time history response analysis so that a general design architect was easy to use the damper. We could express dynamics properties of visco-elastic body properties by Voigt model, and the structural model almost accorded with an examination property value. We made a structural model of the whole frame system by Kb of installation rigidity obtained from loading tests in timber frame. Because a design level almost accorded with experimental value, the validity of the frame design on seismic-response controlled structure in consideration of the dependence (distortion, frequency, temperature) of the visco-elastic body was confirmed. This visco-elastic damper on seismic-response controlled structure acquired minister authorization of Ministry of Land, Infrastructure and Transport. In addition, this damper acquired the certification of the Japan Building Disaster Prevention Association.

scholarly journals Evaluation of p-delta effect in structural seismic response

2018 ◽  
Vol 162 ◽  
pp. 04019 ◽  
Author(s):  
Sardasht Sardar ◽  
Ako Hama
Keyword(s):  
Seismic Response ◽  
Pushover Analysis ◽  
Nonlinear Dynamic Analysis ◽  
Time History ◽  
Steel Structure ◽  
Nonlinear Static Analysis ◽  
Structural Behavior ◽  
Finite Element Software ◽  
History Analysis ◽  
Nonlinear Static

Numerous recent studies have assessed the effect of P-Delta on the structures. This paper investigates the effect of P-Delta in seismic response of structures with different heights. For indicating the effect of P-Delta, nonlinear static analysis (pushover analysis) and nonlinear dynamic analysis (Time history analysis) were conducted by using finite element software. The results showing that the P-Delta has a significant impact on the structural behavior mainly on the peak amplitude of building when the height of the structures increased. In addition, comparison has been made between concrete and steel structure.

Sign in / Sign up

Export Citation Format

Share Document