Structural and optical properties of KNN nanocubes synthesized by a green route using gelatin

2015 ◽  
Vol 08 (02) ◽  
pp. 1550030 ◽  
Author(s):  
Gh. H. Khorrami ◽  
A. Kompany ◽  
A. Khorsand Zak
Keyword(s):  
Optical Properties ◽  
Sol Gel ◽  
Structural Deformation ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Transmission Electron ◽  
Green Route ◽  
Vis Spectroscopy ◽  
Xrd Patterns ◽  
Average Size

Sodium potassium niobate nanoparticles [( K 0.5 Na 0.5) NbO 3, KNN ], KNN-NPs, were synthesized using a modified sol–gel method. Structural and optical properties of the prepared samples were investigated by thermogravometric analyzer (TGA), X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman and UV–Vis spectroscopy. The XRD patterns showed that the formation of the orthorhombic KNN-NPs starts at 500°C calcination temperature. Raman spectroscopy was used to investigate the crystalline symmetry and the structural deformation of the prepared KNN-NPs. TEM images showed that the morphology of the prepared particles is cubic, with the average size of about 50 nm. From diffused reflectance spectroscopy along with using Kubelka–Munk method, the energy bandgaps were determined to be indirect with the values of 3.13 eV and 3.19 eV for the samples calcined at 500°C and 600°C, respectively.

The effects of different polymerization agents on structural and optical properties of (K0.5Na0.5)NbO3 nanopowders synthesized by a facile green route

2014 ◽  
Vol 28 (28) ◽  
pp. 1450224 ◽  
Author(s):  
Gh. H. Khorrami ◽  
A. Kompany ◽  
A. Khorsand Zak
Keyword(s):  
Optical Properties ◽  
Sol Gel ◽  
Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
Energy Band Gap ◽  
Structural And Optical Properties ◽  
Transmission Electron ◽  
Green Route ◽  
Xrd Patterns ◽  
Average Size

( K 0.5 N 0.5) NbO 3 lead-free nanopowders were synthesized by a modified sol–gel method in different media: gelatin, starch and chitosan, as polymerization and stabilizer agents. The proper temperature needed for calcinating the prepared gel was obtained using thermogravometric analysis (TGA). Structural and optical properties of the prepared powders were investigated and compared using X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-Vis diffused reflectance spectroscopy. The XRD patterns of the synthesized samples confirmed the formation of the orthorhombic structure at 600°C calcination temperature with no remarkable extra peaks. TEM images showed that the morphologies of the particles prepared in the three different media are cubic with the average size of about 69, 34 and 49 nm for gelatin, starch and chitosan, respectively. The value of the energy band gap of the samples was calculated by diffused reflectance spectroscopy, using Kubelka–Munk method. Our results showed that the type of the polymerization agent is important in preparing KNN nanoparticles and affects the structural and optical properties of the synthesized samples.

The effect of silver concentration and calcination temperature on structural and optical properties of ZnO:Ag nanoparticles

2015 ◽  
Vol 29 (01) ◽  
pp. 1450254 ◽  
Author(s):  
M. Shayani Rad ◽  
A. Kompany ◽  
A. Khorsand Zak ◽  
M. E. Abrishami
Keyword(s):  
Calcination Temperature ◽  
Sol Gel ◽  
Visible Emission ◽  
X Ray Diffraction ◽  
Ag Nps ◽  
Zno Nps ◽  
Calcination Temperatures ◽  
Transmission Electron ◽  
Xrd Patterns ◽  
Average Size

Pure and silver added zinc oxide nanoparticles ( ZnO -NPs and ZnO : Ag -NPs) were synthesized through a modified sol–gel method. The prepared samples were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM) and photoluminescence (PL) spectroscopy. In the XRD patterns, silver diffracted peaks were also observed for the samples synthesized at different calcination temperatures of 500°C, 700°C, 900°C except 1100°C, in addition to ZnO . TEM images indicated that the average size of ZnO : Ag -NPs increases with the amount of Ag concentration. The PL spectra of the samples revealed that the increase of Ag concentration results in the increase of the visible emission intensity, whereas by increasing the calcination temperature the intensity of visible emission of the samples decreases.

Effect of fuel content on formation of zinc aluminate nano and micro-particles synthesised by high rate sol–gel autoignition of glycine-nitrates

2016 ◽  
Vol 70 (3) ◽  
Author(s):  
Shiva Salem
Keyword(s):  
Thermal Analyses ◽  
Sol Gel ◽  
High Rate ◽  
Zinc Aluminate ◽  
X Ray Diffraction ◽  
Micro Particles ◽  
Transmission Electron ◽  
Xrd Patterns ◽  
Average Size ◽  
20 Nm

AbstractThe autoignition technique using glycine as fuel and related nitrate salts as an oxidiser is able to produce zinc aluminate spinel. The precursors were synthesised with lean and rich fuel at pH of 7.0 and the materials so obtained were calcined at various temperatures ranging from 600-1200°C. The autoignition process of precursors was studied by the simultaneous thermo-gravimetric and differential thermal analyses to determine the ignition mechanism. The calcined powders were characterised by X-ray diffraction, Brunauer-Emmett-Teller technique and transmission electron microscopy. The product contains nano-sized particles with an average size of approximately 20 nm. The XRD patterns showed the formation of ZnO in the powder obtained by the fuel-rich precursor and calcined at 600°C which disappears at 800°C due to solid-state reaction and proper crystallisation after heat treatment. The results presented here can be useful in manufacturing nano and micro-sized ZnAl

scholarly journals Structural and optical properties of SnO2–Al2O3 nanocomposite synthesized via sol-gel route

2015 ◽  
Vol 33 (4) ◽  
pp. 714-718 ◽  
Author(s):  
Neeraj K. Mishra ◽  
Chaitnaya Kumar ◽  
Amit Kumar ◽  
Manish Kumar ◽  
Pratibha Chaudhary ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Optical Properties ◽  
Sol Gel ◽  
Physical Interaction ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Sensing Applications ◽  
Scanning Electron

AbstractA nanocomposite of 0.5SnO2–0.5Al2O3 has been synthesized using a sol-gel route. Structural and optical properties of the nanocomposite have been discussed in detail. Powder X-ray diffraction and scanning electron microscopy with energy-dispersive X-ray diffraction spectroscopy confirm the phase purity and the particle size of the 0.5SnO2–0.5Al2O3 nanocomposite (13 to 15 nm). The scanning electron microscopy also confirms the porosity in the sample, useful in sensing applications. The FT-IR analysis confirms the presence of physical interaction between SnO2 and Al2O3 due to the slight shifting and broadening of characteristic bands. The UV-Vis analysis confirms the semiconducting nature because of direct transition of electrons into the 0.5SnO2–0.5Al2O3 nanocomposites.

Structural and Optical Properties of Al Co-Doped ZnCoO Thin Film

2014 ◽  
Vol 989-994 ◽  
pp. 656-659
Author(s):  
Ping Cao ◽  
Yue Bai
Keyword(s):  
Thin Film ◽  
Optical Properties ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Al Doping ◽  
X Ray ◽  
Uv Emission ◽  
Uv Absorption Spectroscopy ◽  
Co Doped

Al co-doped ZnCoO thin film has been prepared by a sol-gel method. The structural and optical properties of the sample were investigated. X-ray diffraction and UV absorption spectroscopy analyses indicate that Al3+ and Co2+ substitute for Zn2+ without changing the wurtzite structure. With the Al doping, the visible emission increased and the UV emission decreased, which is attributed to the increase of O vacancies and Zn interstitials.

scholarly journals Fe2O3 Modified Physical, Structural and Optical Properties of Bismuth Silicate Glasses

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Rajesh Parmar ◽  
R. S. Kundu ◽  
R. Punia ◽  
N. Kishore ◽  
P. Aghamkar
Keyword(s):  
Optical Properties ◽  
Silicate Glasses ◽  
Bandgap Energy ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Scanning Calorimetry ◽  
Bismuth Silicate ◽  
Vis Spectroscopy ◽  
Amorphous Nature ◽  
Optical Bandgap Energy

Iron-containing bismuth silicate glasses with compositions 60SiO2·(100−x)Bi2O3·xFe2O3 have been prepared by conventional melt-quenching technique. The amorphous nature of the glass samples has been ascertained by the X-ray diffraction. The density (d) has been measured using Archimedes principle, molar volume (Vm) has also been estimated, and both are observed to decrease with the increase in iron content. The glass transition temperature (Tg) of these iron bismuth silicate glasses has been determined using differential scanning calorimetry (DSC) technique, and it increases with the increase in Fe2O3 content. The IR spectra of these glasses consist mainly of [BiO6], [BiO3], and [SiO4] structural units. The optical properties are measured using UV-VIS spectroscopy. The optical bandgap energy (Eop) is observed to decrease with the increase in Fe2O3 content, whereas reverse trend is observed for refractive index.

scholarly journals Structural and optical properties of AgCl-sensitized TiO2 (TiO2 @AgCl) prepared by a reflux technique under alkaline condition

Cerâmica ◽  
2018 ◽  
Vol 64 (370) ◽  
pp. 190-196 ◽  
Author(s):  
V. A. Mu’izayanti ◽  
H. Sutrisno
Keyword(s):  
Visible Light ◽  
Surface Area ◽  
Alkaline Condition ◽  
Visible Light Region ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Light Region ◽  
Vis Spectroscopy ◽  
Xrd Patterns ◽  
Tio2 Rutile

Abstract The AgCl-sensitized TiO2 (TiO2@AgCl) has been prepared from the precursor of TiO2-rutile type which on its surface adsorb chloride anion (Cl-) and various amounts of silver using AgNO3 as starting material: AgNO3/(AgNO3+TiO2) mass ratio of 0.00, 1.14, 3.25, 6.38 and 10.32%. Reflux under alkaline condition was the employed technique. All samples were characterized by X-ray diffraction (XRD) and diffuse reflectance UV-vis spectroscopy. The sample without the addition of AgNO3 was analyzed by scanning electron microscope and surface area analyzer. The morphology of the sample showed a distribution of microspheres of approximately 0.5 to 1.0 µm and the specific surface area was 68 m2/g. XRD patterns indicated that the sample without the addition of AgNO3 contained two types of TiO2: rutile (major) and anatase (minor), whereas the samples with the addition of AgNO3 consisted of one phase of AgCl and two types of TiO2: rutile and anatase. The bandgaps of the samples were in the range of 2.97 to 3.24 eV, which were very close to the bandgap of intrinsic TiO2 powder. The presence of 0.8, 2.6 and 4.4 wt% of AgCl in each sample resulted in an additional bandgap in visible light region of 1.90, 1.94 and 2.26 eV, respectively, whereas the presence of 9.4 wt% of AgCl in the sample resulted in two bandgaps in visible light region of 1.98 and 1.88 eV.

scholarly journals Synthesis and optical properties of self-assembled flower-like CdS architectures by mixed solvothermal process

2010 ◽  
Vol 8 (5) ◽  
pp. 1027-1033 ◽  
Author(s):  
Junhao Zhang ◽  
Yuhui Wu ◽  
Jia Zhu ◽  
Shaoxing Huang ◽  
Dongjing Zhang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Optical Properties ◽  
X Ray Diffraction ◽  
Wurtzite Phase ◽  
Strong Emission ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Self Assembled ◽  
Xrd Patterns ◽  
Hexagonal Wurtzite Phase

AbstractSelf-assembled CdS architectures with flower-like structures have been synthesized by a mixed solvothermal method using ethylene glycol and oleic acid as the mixed solvent at 160°C for 12 h. The results of X-ray diffraction (XRD) patterns, field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) images indicate that the product exists as the hexagonal wurtzite phase and conatins of larger numbers of flower-like CdS architectures with diameters of 1.8–3 μm. The selected-area electron diffraction (SAED) pattern and the high resolution transmission electron microscope (HRTEM) image reveal that the grain has better crystallinity. The optical properties of flower-like CdS architectures were also investigated by ultraviolet-visable (UV-vis) and photoluminescence spectroscopy at room temperature. A strong peak at 490 nm is shown in the UV-vis absorption, while an emission at 486 nm and another strong emission at 712 nm are shown in the PL spectrum.

CONTROLLED SYNTHESIS OF THE ZnWO4 NANOSTRUCTURE AND STUDY OF THEIR STRUCTURAL AND OPTICAL PROPERTIES

2012 ◽  
Vol 21 (01) ◽  
pp. 1250002 ◽  
Author(s):  
NGUYEN MANH HUNG ◽  
LAM THI HANG ◽  
NGUYEN VAN KHANH ◽  
DU THI XUAN THAO ◽  
NGUYEN VAN MINH
Keyword(s):  
Electron Microscopy ◽  
Grain Size ◽  
Optical Properties ◽  
Reaction Time ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Calcination Time ◽  
Transmission Electron ◽  
Pure Phase ◽  
Size And Morphology

We investigate the effects of calcination time and concentration of solution on the structure, as well as optical properties in ZnWO4 nanopowder prepared by hydrothermal method. The prepared powder were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman scattering, optical absorption and photoluminescent spectroscopy (PL). It is shown that the grain size and morphology of ZnWO4 nanopowder can be controlled by adjusting the reaction time as well as the concentration of the solution. The resultant sample is a pure phase of ZnWO4 without any impurities. The result showed that the optical property of ZnWO4 nanopowders depend on their grain size. The optical band gap becomes narrower as the reaction time or concentration of solution is increased. The improved PL properties of the ZnWO4 crystallites can be obtained with the optimal concentration of the solution.

Influence of Li2+ Doping on the Structural and Optical Properties of CaO Synthesized by Sol–Gel Process

2019 ◽  
Vol 07 (01n02) ◽  
pp. 1950002
Author(s):  
Nadir Lalou ◽  
Ahmed Kadari
Keyword(s):  
Optical Properties ◽  
Band Gap ◽  
Sol Gel ◽  
Calcium Nitrate ◽  
Lithium Nitrate ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Sol Gel Process ◽  
Ft Ir ◽  
First Time

This work proposes the synthesis of nanocrystalline calcium oxide (CaO) pure and doped with different concentrations of lithium (Li[Formula: see text]) ions by sol–gel process. Calcium nitrate (Ca(NO[Formula: see text]4H2O; 99.99%) and lithium nitrate (LiNO3; 99.99%) were used as precursors. The synthesized powders were characterized by several techniques such as: UV-Vis transmission spectroscopy, Fourier Transform Infra-red spectroscopy (FT-IR) and X-ray diffraction (XRD). The main objective of this paper is to study the influence of lithium (Li[Formula: see text] ratio) on the structural and optical properties of synthesized powders. The band gap values decreased with the increasing of Li[Formula: see text] ions in CaO lattice; the slight change in the band gap was directly related to the energy transfer between the CaO excited states and the 2s levels of Li[Formula: see text] ions. The influence of Li[Formula: see text] doping on the physical properties of CaO nanocrystalline will be studied for the first time in this work; no literature has previously published this kind of impurities.

Sign in / Sign up

Export Citation Format

Share Document