Modeling and optimization of a wide-band piezoelectric energy harvester for smart building structures

2020 ◽  
Vol 11 (02) ◽  
pp. 2050009
Author(s):  
Prateek Asthana ◽  
Gargi Khanna
Keyword(s):  
Resonant Frequency ◽  
Energy Harvester ◽  
Proof Mass ◽  
Mechanical Energy ◽  
Wide Band ◽  
Electrical Energy ◽  
Sensor Nodes ◽  
Ambient Vibrations ◽  
Band Energy ◽  
Piezoelectric Energy

Piezoelectric energy harvesting refers to conversion of mechanical energy into usable electrical energy. In the modern connected world, wireless sensor nodes are scattered around the environment. These nodes are powered by batteries. Batteries require regular replacement, hence energy harvesters providing continuous autonomous power are used to power these sensor nodes. This work provides two different fixation modes for the resonant frequency for the two modes. Variation in geometric parameter and their effect on resonant frequency and output power have been analyzed. These harvesters capture a wide-band of ambient vibrations and convert them into usable electrical energy. To capture random ambient vibrations, the harvester used is a wide-band energy harvester based on conventional seesaw mechanism. The proposed structure operates on first two resonant frequencies in comparison to the conventional cantilever system working on first resonant frequency. Resonance frequency, as well as response to a varying input vibration frequency, is carried out, showing better performance of seesaw cantilever design. In this work, modeling of wide-band energy harvester with proof mass is being performed. Position of proof mass plays a key role in determining the resonant frequency of the harvester. Placing the proof mass near or away from fixed end results in increase and decrease in stress on the piezoelectric layer. Hence, to avoid the breaking of cantilever, the position of proof mass has been analyzed.

Multiple Resonances Piezoelectric Energy Harvesting Generator

2009 ◽  
Author(s):  
Shaofan Qi ◽  
Roger Shuttleworth ◽  
S. Olutunde Oyadiji
Keyword(s):  
Energy Harvesting ◽  
Energy Harvester ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Limited Bandwidth ◽  
Piezo Element ◽  
Piezoelectric Energy ◽  
Wide Range ◽  
Environmental Vibration ◽  
Design And Testing

Energy harvesting is the process of converting low level ambient energy into usable electrical energy, so that remote electronic instruments can be powered without the need for batteries or other supplies. Piezoelectric material has the ability to convert mechanical energy into electrical energy, and cantilever type harvesters using this material are being intensely investigated. The typical single cantilever energy harvester design has a limited bandwidth, and is restricted in ability for converting environmental vibration occurring over a wide range of frequencies. A multiple cantilever piezoelectric generator that works over a range of frequencies, yet has only one Piezo element, is being investigated. The design and testing of this novel harvester is described.

Piezoelectric wind energy harvester for low-power sensors

2011 ◽  
Vol 22 (18) ◽  
pp. 2215-2228 ◽  
Author(s):  
Jayant Sirohi ◽  
Rohan Mahadik
Keyword(s):  
Energy Harvesting ◽  
Wind Energy ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Load Resistance ◽  
Operating Conditions ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Wireless Sensor Nodes ◽  
Piezoelectric Energy

There has been increasing interest in wireless sensor networks for a variety of outdoor applications including structural health monitoring and environmental monitoring. Replacement of batteries that power the nodes in these networks is maintenance intensive. A wind energy–harvesting device is proposed as an alternate power source for these wireless sensor nodes. The device is based on the galloping of a bar with triangular cross section attached to a cantilever beam. Piezoelectric sheets bonded to the beam convert the mechanical energy into electrical energy. A prototype device of size approximately 160 × 250 mm was fabricated and tested over a range of operating conditions in a wind tunnel, and the power dissipated across a load resistance was measured. A maximum power output of 53 mW was measured at a wind velocity of 11.6 mph. An analytical model incorporating the coupled electromechanical behavior of the piezoelectric sheets and quasi-steady aerodynamics was developed. The model showed good correlation with measurements, and it was concluded that a refined aerodynamic model may need to include apparent mass effects for more accurate predictions. The galloping piezoelectric energy-harvesting device has been shown to be a viable option for powering wireless sensor nodes in outdoor applications.

scholarly journals Development and Validation of an Enhanced Coupled-Field Model for PZT Cantilever Bimorph Energy Harvester

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Long Zhang ◽  
Keith A. Williams ◽  
Zhengchao Xie
Keyword(s):  
Energy Harvester ◽  
Field Model ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Open Circuit ◽  
Conservation Of Energy ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Comparison Results ◽  
Coupled Field

The power source with the limited life span has motivated the development of the energy harvesters that can scavenge the ambient environment energy and convert it into the electrical energy. With the coupled field characteristics of structure to electricity, piezoelectric energy harvesters are under consideration as a means of converting the mechanical energy to the electrical energy, with the goal of realizing completely self-powered sensor systems. In this paper, two previous models in the literatures for predicting the open-circuit and close-circuit voltages of a piezoelectric cantilever bimorph (PCB) energy harvester are first described, that is, the mechanical equivalent spring mass-damper model and the electrical equivalent circuit model. Then, the development of an enhanced coupled field model for the PCB energy harvester based on another previous model in the literature using a conservation of energy method is presented. Further, the laboratory experiments are carried out to evaluate the enhanced coupled field model and the other two previous models in the literatures. The comparison results show that the enhanced coupled field model can better predict the open-circuit and close-circuit voltages of the PCB energy harvester with a proof mass bonded at the free end of the structure in order to increase the energy-harvesting level of the system.

Electrical Energy Harvesting Using a Mechanical Rectification Approach

Aerospace ◽  
2006 ◽  
Author(s):  
R. M. Tieck ◽  
G. P. Carman ◽  
D. G. Enoch Lee
Keyword(s):  
Energy Density ◽  
Energy Harvesting ◽  
Power Density ◽  
Energy Harvester ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
New Approach ◽  
Piezoelectric Energy ◽  
Power Densities ◽  
Frequency Rectification

This paper presents a new approach using frequency rectification to harvest electrical energy from mechanical energy using piezoelectric devices. The rectification approach utilizes a linearly traveling Rectifier to impart vibrational motion to a cantilever piezoelectric bimorph. A conventional cantilever-type energy harvester is tested aside the rectified beam. The Standard beam generated 0.11 W of power, a power density of 15.63 kW/m3, and an energy density of 130.7 J/m3. The Rectified beam generated 580 mW of power, a power density of 871.92 kW/m3, and an energy density of 313.15 J/m3, a factor 2.4 greater than conventional energy harvesting methods. These results confirm the original thesis that a mechanically rectified piezoelectric Energy Harvester would generate larger Energy and Power Densities as well as Specific Powers, compared to conventional technologies.

scholarly journals Development of Piezoelectric Energy Harvester System through Optimizing Multiple Structural Parameters

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2876
Author(s):  
Hailu Yang ◽  
Ya Wei ◽  
Weidong Zhang ◽  
Yibo Ai ◽  
Zhoujing Ye ◽  
...  
Keyword(s):  
Power Generation ◽  
Energy Harvesting ◽  
Energy Harvester ◽  
Structural Parameters ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Cross Sectional ◽  
Accelerated Pavement Testing ◽  
Piezoelectric Energy ◽  
Pavement Testing

Road power generation technology is of significance for constructing smart roads. With a high electromechanical conversion rate and high bearing capacity, the stack piezoelectric transducer is one of the most used structures in road energy harvesting to convert mechanical energy into electrical energy. To further improve the energy generation efficiency of this type of piezoelectric energy harvester (PEH), this study theoretically and experimentally investigated the influences of connection mode, number of stack layers, ratio of height to cross-sectional area and number of units on the power generation performance. Two types of PEHs were designed and verified using a laboratory accelerated pavement testing system. The findings of this study can guide the structural optimization of PEHs to meet different purposes of sensing or energy harvesting.

Design, Simulation & Optimization of a MEMS Based Piezoelectric Energy Harvester

2021 ◽  
Vol 12 (07) ◽  
pp. 318-329
Author(s):  
Indrajit Chandra Das ◽  
Md. Arafat Rahman ◽  
Sanjoy Dam
Keyword(s):  
Finite Element Method ◽  
Energy Harvesting ◽  
Energy Harvester ◽  
Proof Mass ◽  
Simulation Optimization ◽  
Electrical Energy ◽  
Comsol Multiphysics ◽  
Piezoelectric Energy Harvesting ◽  
The Finite Element Method ◽  
Piezoelectric Energy

Energy harvesting is defined as a process of acquiring energy surrounding a system and converting it into electrical energy for usage. Piezoelectric energy harvesting is a very important concept in energy harvesting in microelectronics. In this report, an analysis of the cantilever type piezoelectric energy harvester is conducted using the finite element method (FEM) based software COMSOL Multiphysics. A unimorph type cantilever beam of the silicon substrate, structural steel as proof mass and support, and PZT-5A material as piezoelectric constitute the physical system.

A Novel Piezoelectric Multilayer Stack Energy Harvester With Force Amplification

2013 ◽  
Author(s):  
Wanlu Zhou ◽  
Lei Zuo
Keyword(s):  
Energy Conversion ◽  
Energy Harvester ◽  
Proof Mass ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Electrical Energy ◽  
Energy Conversion Efficiency ◽  
Power Delivery ◽  
Delivery Ratio ◽  
Resistive Load

A piezoelectric lead zirconate titanate (PZT) multilayer stack flextensional energy harvester (PZT-Stack-FEH) was designed and characterized in this paper. An elastic flextensional frame for force amplification was optimally designed to transmit more mechanical energy with high efficiency to the PZT-Stack-FEH. Instead of 31-mode single layer piezoelectric component, a 33-mode piezoelectric PZT multilayer stack was employed to increase mechanical-to-electrical energy conversion efficiency. The power delivery ratio of the electrical power dissipated by resistive load over the total generated electrical power from PZT stack was studied. Theoretical analysis and experiments were carried out. The experiment results show that the mechanical-to-electrical energy conversion efficiency of the PZT-Stack-FEH is 19%, 48.6 times more mechanical energy can be transmitted to PZT-Stack-FEH, and 26.5 times more electrical energy can be generated by using the PZT-Stack-FEH than directly applying force to the PZT multilayer stack. The maximum power delivery ratio can attain 70% when the resistive load matches the impedance of piezoelectric stack. The power generation performance of the PZT-Stack-FEH with a proof mass was also studied. Experiment results show that he peak power/acceleration can attain 2400mW/g when the PZT-Stack-FEH is connected with a proof mass of 200 grams and 3280 mW/g with a proof mass of 500 grams.

Modeling of a Piezoelectric Energy Harvester Mounted on a Quick-Return Mechanism

2014 ◽  
Author(s):  
Haileyesus Endeshaw ◽  
Fisseha Alemayehu ◽  
Stephen Ekwaro-Osire
Keyword(s):  
Power Output ◽  
Energy Harvester ◽  
Piezoelectric Materials ◽  
Mechanical Energy ◽  
Research Question ◽  
Electrical Energy ◽  
Maximum Power ◽  
Ambient Vibration ◽  
Maximum Power Output ◽  
Piezoelectric Energy

Piezoelectric materials are being used to harvest mechanical energy from ambient vibration and convert it to electrical energy. They are mainly used to power miniature wireless sensors such as accelerometers, tachometers and proximity probes, which are commonly used for machine monitoring applications. However, exciting a piezoelectric cantilever with its resonance frequency for maximum power output remains to be a challenge. This is because the natural frequency of piezoelectric cantilevers is much higher than the common ambient vibrations. This study answers the research question: “Does a quick-return mechanism enhance the power output of a piezoelectric energy harvester?” For this purpose, analytical methods were employed to model a piezoelectric energy harvester mounted on a quick-return mechanism. The proposed mechanism was able to generate approximately 13.5mW of power, which is 35%–75% greater than the existing designs. A study on the working frequency range of the harvester for maximum power output was employed by varying the dimensional parameters of the quick-return mechanism. It was determined that by varying the dimensions of the quick return it is possible to harvest maximum power at a range of excitation frequencies. It was demonstrated that the system can effectively produce the maximum power when excited at frequencies ranging from 2rad/s to 46rad/s.

scholarly journals Piezoelectric Energy Harvester for IoT Sensor Devices

2021 ◽  
Vol 5 (4) ◽  
pp. 124
Author(s):  
Noor Pratama Apriyanto ◽  
Eka Firmansyah ◽  
Lesnanto Multa Putranto
Keyword(s):  
Energy Harvesting ◽  
Energy Harvester ◽  
Electrical Energy ◽  
Sensor Nodes ◽  
Energy Characteristics ◽  
Module Design ◽  
Piezoelectric Energy ◽  
Battery Power ◽  
Piezoelectric Elements ◽  
Energy Harvesting System

Limited battery power is a major challenge for wireless sensor network (WSN) in internet of things (IoT) applications, especially in hard-to-reach places that require periodic battery replacement. The energy harvesting application is intended as an alternative to maintain network lifetime by utilizing environmental energy. The proposed method utilized piezoelectricity to convert vibration or pressure energy into electrical energy through a modular piezoelectric energy harvesting design used to supply energy to sensor nodes in WSN. The module design consisted of several piezoelectric elements, of which each had a different character in generating energy. A bridge diode was connected to each element to reduce the feedback effect of other elements when pressure was exerted. The energy produced by the piezoelectric is an impulse so that the capacitor was used to quickly store the energy. The proposed module produced 7.436 μJ for each step and 297.4 μJ of total energy with pressure of a 45 kg load 40 times with specific experiments installed under each step. The energy could supply WSN nodes in IoT application with a simple energy harvesting system. This paper presents a procedure for measuring the energy harvested from a commonly available piezoelectric buzzer. The specific configurations of the piezoelectric and the experiment setups will be explained. Therefore, the output energy characteristics will be understood. In the end, the potentially harvested energy can be estimated. Therefore, the configuration of IoT WSN could be planned.

Enhanced Coupled Field Modeling of PZT Cantilever Bimorph Energy Harvester

2011 ◽  
Vol 145 ◽  
pp. 21-26
Author(s):  
Long Zhang ◽  
Keith A. Williams ◽  
Zheng Chao Xie
Keyword(s):  
Energy Harvester ◽  
Field Model ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Consumer Electronics ◽  
Conservation Of Energy ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Comparison Results ◽  
Coupled Field

As consumer electronics continue to develop in size and scope, the battery power source with the limited life span poses an increasing economic challenge. This growing problem has motivated the development of the energy harvesters that can scavenge the ambient environment energy and convert it into the electrical energy for use of the wireless sensor nodes and the portable electronics. With the coupled field characteristics of structure to electricity, piezoelectric energy harvesters are under consideration as a means for converting the mechanical energy to the electrical energy, with the goal of realizing completely self-powered sensor systems. In this paper, the development of an enhanced coupled field model for the PCB energy harvester based on a previous model in the literature using a conservation of energy method is presented. Further, the laboratory experiments are carried out to evaluate the enhanced coupled field model and the other two previous models in the literatures. The comparison results show that the enhanced coupled field model can better predict the open-circuit of the PCB energy harvester with a proof mass bonded at the free end of the structure in order to increase the energy harvesting level of the system.

Sign in / Sign up

Export Citation Format

Share Document