Interpretation of buried basement in the southwestern Athabasca Basin, Canada, from integrated geophysical and geological datasets

2020 ◽  
Vol 21 (1) ◽  
pp. geochem2019-061
Author(s):  
Victoria Tschirhart ◽  
Sally Pehrsson ◽  
Colin Card ◽  
Eric G. Potter ◽  
Jeremy Powell ◽  
...  
Keyword(s):  
Potential Field ◽  
Physical Property ◽  
Drill Hole ◽  
Airborne Gravity ◽  
Content Type ◽  
Athabasca Basin ◽  
Basement Rocks ◽  
Gravity And Magnetic ◽  
Geophysical Surveys ◽  
Lineament Analysis

Recent discoveries of basement-hosted uranium deposits in the Patterson Lake corridor in the southwestern Athabasca Basin of Canada have brought vigorous exploration interest to the region. New lithostratigraphic constraints, geochronology and airborne geophysical surveys have dramatically improved the understanding of the host basement geology, warranting a re-examination of the remote predictive mapping and geophysical responses of the buried basement rocks. This study took a two-step approach to examine the regional basement geology and architecture. First, a mosaic of the long-wavelength response of potential field (gravity and magnetic) datasets was examined to divide the basement into regional domains based on bulk physical property variations. The interpretive geological model was then refined using textural and lineament analysis of new airborne gravity and magnetic datasets, geological drill hole logs and magnetic susceptibility measurements. The new basement map identifies and updates major features including a crustal-scale structure that separates the southern Tantato Domain from the newly defined eastern Taltson Domain. This structure may have played a role in localizing fluid flow in the Patterson Lake corridor, defining the spatial extents of structurally controlled buried felsic intrusions, and redefines the boundaries of the Taltson, Clearwater and Tantato Domains. In addition, the potential field enhancements delineated significant regional faults that controlled the geometry of Paleoproterozoic cover sequences and have implications for understanding the crustal architecture of the southern Rae Province. These new interpretations shed light on the tectonic history of the region to support on-going exploration activities and delineate regionally prospective areas in this understudied area of the Canadian Shield.Thematic collection: This article is part of the Uranium Fluid Pathways collection available at: https://www.lyellcollection.org/cc/uranium-fluid-pathways

Structural evolution and related implications for uranium mineralization in the Patterson Lake corridor, southwestern Athabasca Basin, Saskatchewan, Canada

2020 ◽  
pp. geochem2020-030
Author(s):  
Dillon Johnstone ◽  
Kathryn Bethune ◽  
Colin Card ◽  
Victoria Tschirhart
Keyword(s):  
Structural Evolution ◽  
Uranium Mineralization ◽  
Ductile Deformation ◽  
Normal Faults ◽  
Uranium Deposits ◽  
Content Type ◽  
Athabasca Basin ◽  
Basement Rocks ◽  
Transfer Faults ◽  
Dextral Strike Slip

The Patterson Lake corridor is situated along the southwest margin of the Athabasca Basin and contains several basement-hosted uranium deposits and prospects. Drill core investigations during this study have determined that granite, granodiorite, mafic and alkali intrusive basement rocks are entrained in a deep-seated northeast-striking subvertical heterogeneous high-strain zone defined by anastomosing ductile to semi-brittle shears and brittle faults. The earliest phases of ductile deformation (D1/2), linked with Taltson (1.94–1.92 Ga) orogenesis, involved interference between early fold sets (F1/2) and development of an associated ductile transposition foliation (S1/2). During subsequent Snowbird (ca. 1.91–1.90 Ga) tectonism, this composite foliation was re-folded (D3) by northeast-trending buckle-style folds (F3), including a regional fold centered on the Clearwater aeromagnetic high. In continuum with D3, a network of dextral-reverse chloritic-graphitic shears, with C-S geometry, formed initially (D4a) and progressed to more discrete, spaced semi-brittle structures (D4b; ca. 1.900–1.819 Ga). Basin development (D5a; <ca. 1.819 Ga) was marked by a set of north-striking normal faults and related east- and northeast-striking transfer faults that accommodated subsidence. Primary uranium mineralization (D5b; ∼1.45 Ga) was facilitated by brittle reactivation of northeast-striking basement shears in response to west-southwest - east-northeast-directed compressional stress (σ1). Uraninite was emplaced along σ1-parallel extension fractures and dilational zones formed at linkages between northeast- and east-northeast-striking dextral strike-slip faults. Uranium remobilization (D5c) occurred after σ1 shifted to west-northwest – east-southeast, giving rise to regional east- and southeast-striking conjugate faults, along which mafic dykes (1.27 Ga and 1.16 Ga) intruded.Thematic collection: This article is part of the Uranium Fluid Pathways collection available at: https://www.lyellcollection.org/cc/uranium-fluid-pathways

Joint and constrained inversion of magnetic and gravity data: A case history from McArthur River area, Canada

Geophysics ◽  
2020 ◽  
pp. 1-76
Author(s):  
Mehrdad Darijani ◽  
Colin G. Farquharson ◽  
Peter G. Lelièvre
Keyword(s):  
Joint Inversion ◽  
Gravity Data ◽  
Real Life ◽  
Magnetic Data ◽  
Airborne Gravity ◽  
Uranium Deposits ◽  
Athabasca Basin ◽  
Compositional Approach ◽  
Gravity And Magnetic ◽  
Gravity And Magnetic Data

Magnetic and gravity data are used in the early stages of exploration for uranium deposits in the Athabasca Basin of Canada, just as for many other mineral exploration scenarios. Uranium mineralization in the Athabasca Basin is located where faults in the basement intersect the unconformity between the basement and the overlying sandstones. Both the gravity and magnetic data are dominated by signatures from the basement and an overburden of glacial sediments. The gravity and magnetic data are effective at mapping the basement geology. Any subtle gravity signal from the mineralization related to the formation of the uranium deposits is masked by the signal from the variable thickness overburden. 3D joint inversion of gravity and magnetic data, first without and then with constraints, is evaluated as a means of better determining the structure of the three main lithologies (overburden, sandstones, basement) in the Athabasca Basin. A significant amount of physical property information is available for the main rock units (and overburden), which makes the use of the compositional approach to joint inversion appropriate. For the joint inversion, the fuzzy c-mean clustering method is used. Results from representative synthetic examples show that the joint inversions can construct the overburden and basement structures better than the independent inversions of gravity and magnetic data. Furthermore, constrained joint inversion allows delineation of all three major layers in the area. The same inversion strategies were then applied to the real airborne gravity and magnetic data from the McArthur River area in the eastern Athabasca Basin. The results obtained demonstrate the capabilities of joint inversion for real-life situations.

Jurassic–Cretaceous arc magmatism along the Shyok–Bangong Suture from NW Himalaya: Formation of the peri-Gondwana basement to the Ladakh Arc

2021 ◽  
pp. jgs2021-035
Author(s):  
Wanchese M. Saktura ◽  
Solomon Buckman ◽  
Allen P. Nutman ◽  
Renjie Zhou
Keyword(s):  
Late Cretaceous ◽  
Nw Himalaya ◽  
Content Type ◽  
Magmatic Arc ◽  
Basement Rocks ◽  
Ladakh Himalaya ◽  
Accreted Terranes ◽  
Volcaniclastic Rocks ◽  
Supplementary Material ◽  
Depositional Age

The Jurassic–Cretaceous Tsoltak Formation from the eastern borderlands of Ladakh Himalaya consists of conglomerates, sandstones and shales, and is intruded by norite sills. It is the oldest sequence of continent-derived sedimentary rocks within the Shyok Suture. It also represents a rare outcrop of the basement rocks to the voluminous Late Cretaceous–Eocene Ladakh Batholith. The Shyok Formation is a younger sequence of volcaniclastic rocks that overlie the Tsoltak Formation and record the Late Cretaceous closure of the Mesotethys Ocean. The petrogenesis of these formations, ophiolite-related harzburgites and norite sill is investigated through petrography, whole-rock geochemistry and U–Pb zircon geochronology. The youngest detrital zircon grains from the Tsoltak Formation indicate Early Cretaceous maximum depositional age and distinctly Gondwanan, Lhasa microcontinent-related provenance with no Eurasian input. The Shyok Formation has Late Cretaceous maximum depositional age and displays a distinct change in provenance to igneous detritus characteristic of the Jurassic–Cretaceous magmatic arc along the southern margin of Eurasia. This is interpreted as a sign of collision of the Lhasa microcontinent and the Shyok ophiolite with Eurasia along the once continuous Shyok–Bangong Suture. The accreted terranes became the new southernmost margin of Eurasia and the basement to the Trans-Himalayan Batholith associated with the India-Eurasia convergence.Supplementary material:https://doi.org/10.6084/m9.figshare.c.5633162

Application of gravity and magnetic methods to assess geological hazards and natural resource potential in the Mosida Hills, Utah County, Utah

Geophysics ◽  
2000 ◽  
Vol 65 (5) ◽  
pp. 1514-1526 ◽  
Author(s):  
Alvin K. Benson ◽  
Andrew R. Floyd
Keyword(s):  
Gravity Data ◽  
Magnetic Data ◽  
Geological Hazards ◽  
Mafic Lava ◽  
Subsurface Geology ◽  
Gravity And Magnetic ◽  
Geophysical Surveys ◽  
Utah County ◽  
Gravity And Magnetic Data ◽  
Hills Area

Gravity and magnetic data were collected in the Mosida Hills, Utah County, Utah, at over 1100 stations covering an area of approximately 58 km2 (150 mi2) in order to help define the subsurface geology and assess potential geological hazards for urban planning in an area where the population is rapidly increasing. In addition, potential hydrocarbon traps and mineral ore bodies may be associated with some of the interpreted subsurface structures. Standard processing techniques were applied to the data to remove known variations unrelated to the geology of the area. The residual data were used to generate gravity and magnetic contour maps, isometric projections, profiles, and subsurface models. Ambiguities in the geological models were reduced by (1) incorporating data from previous geophysical surveys, surface mapping, and aeromagnetic data, (2) integrating the gravity and magnetic data from our survey, and (3) correlating the modeled cross sections. Gravity highs and coincident magnetic highs delineate mafic lava flows, gravity lows and magnetic highs reflect tuffs, and gravity highs and magnetic lows spatially correlate with carbonates. These correlations help identify the subsurface geology and lead to new insights about the formation of the associated valleys. At least eight new faults (or fault segments) were identified from the gravity data, whereas the magnetic data indicate the existence of at least three concealed and/or poorly exposed igneous bodies, as well as a large ash‐flow tuff. The presence of low‐angle faults suggests that folding or downwarping, in addition to faulting, played a role in the formation of the valleys in the Mosida Hills area. The interpreted location and nature of concealed faults and volcanic flows in the Mosida Hills area are being used by policy makers to help develop mitigation procedures to protect life and property.

Geological environment of the Cigar Lake uranium deposit

1993 ◽  
Vol 30 (4) ◽  
pp. 653-673 ◽  
Author(s):  
P. Bruneton
Keyword(s):  
Uranium Deposit ◽  
Transitional Zone ◽  
Uranium Deposits ◽  
Athabasca Basin ◽  
Structural Framework ◽  
Basement Rocks ◽  
Metamorphic Basement ◽  
Basement Ridge ◽  
Archean Basement ◽  
East West

The Cigar Lake uranium deposit occurs within the Athabasca Basin of northern Saskatchewan, Canada. Like other major uranium deposits of the basin, it is located at the unconformity separating Helikian sandstones of the Athabasca Group from Aphebian metasediments and plutonic rocks of the Wollaston Group. The Athabasca Group was deposited in an intra-continental sedimentary basin that was filled by fluviatile terrestrial quartz sandstones and conglomerates. The group appears undeformed and its actual maximum thickness is about 1500 m. On the eastern side of the basin, the detrital units correspond to the Manitou Falls Formations where most of the uranium deposits are located. The Lower Pelitic unit of the Wollaston Group, which lies directly on the Archean basement, is considered to be the most favourable horizon for uranium mineralization. During the Hudsonian orogeny (1800–1900 Ma), the group underwent polyphase deformation and upper amphibolite facies metamorphism. The Hudsonian orogeny was followed by a long period of erosion and weathering and the development of a paleoweathering profile.On the Waterbury Lake property, the Manitou Falls Formation is 250–500 m thick and corresponds to units MFd, MFc, and MFb. The conglomeratic MFb unit hosts the Cigar Lake deposit. However, the basal conglomerate is absent at the deposit, wedging out against an east–west, 20 m high, pre-Athabasca basement ridge, on top of which is located the orebody.Two major lithostructural domains are present in the metamorphic basement of the property: (1) a southern area composed mainly of pelitic metasediments (Wollaston Domain) and (2) a northern area with large lensoid granitic domes (Mudjatik Domain). The Cigar Lake east–west pelitic basin, which contains the deposit, is located in the transitional zone between the two domains. The metamorphic basement rocks in the basin consist mainly of graphitic metapelitic gneisses and calcsilicate gneisses, which are inferred to be part of the Lower Pelitic unit. Graphite- and pyrite-rich "augen gneisses," an unusual facies within the graphitic metapelitic gneisses, occur primarily below the Cigar Lake orebody.The mineralogy and geochemistry of the graphitic metapelitic gneisses suggest that they were originally shales. The abundance of magnesium in the intercalated carbonates layers indicates an evaporitic origin.The structural framework is dominated by large northeast–southwest lineaments and wide east–west mylonitic corridors. These mylonites, which contain the augen gneisses, are considered to be the most favourable features for the concentration of uranium mineralization.Despite the presence of the orebody, large areas of the Waterbury Lake property remain totally unexplored and open for new discoveries.

Mechanical arm obstacle avoidance path planning based on improved artificial potential field method

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Tianying Xu ◽  
Haibo Zhou ◽  
Shuaixia Tan ◽  
Zhiqiang Li ◽  
Xia Ju ◽  
...  
Keyword(s):  
Path Planning ◽  
Obstacle Avoidance ◽  
Potential Field ◽  
Planning Process ◽  
Field Method ◽  
Artificial Potential Field ◽  
Local Minima ◽  
Content Type ◽  
Potential Field Method ◽  
Artificial Potential Field Method

Purpose This paper aims to resolve issues of the traditional artificial potential field method, such as falling into local minima, low success rate and lack of ability to sense the obstacle shapes in the planning process. Design/methodology/approach In this paper, an improved artificial potential field method is proposed, where the object can leave the local minima point, where the algorithm falls into, while it avoids the obstacle, following a shorter feasible path along the repulsive equipotential surface, which is locally optimized. The whole obstacle avoidance process is based on the improved artificial potential field method, applied during the mechanical arm path planning action, along the motion from the starting point to the target point. Findings Simulation results show that the algorithm in this paper can effectively perceive the obstacle shape in all the selected cases and can effectively shorten the distance of the planned path by 13%–41% with significantly higher planning efficiency compared with the improved artificial potential field method based on rapidly-exploring random tree. The experimental results show that the improved artificial potential field method can effectively plan a smooth collision-free path for the object, based on an algorithm with good environmental adaptability. Originality/value An improved artificial potential field method is proposed for optimized obstacle avoidance path planning of a mechanical arm in three-dimensional space. This new approach aims to resolve issues of the traditional artificial potential field method, such as falling into local minima, low success rate and lack of ability to sense the obstacle shapes in the planning process.

Sign in / Sign up

Export Citation Format

Share Document