A Low Cost Weight Obfuscation Scheme for Security Enhancement of ReRAM Based Neural Network Accelerators

2021 ◽  
Author(s):  
Yuhang Wang ◽  
Song Jin ◽  
Tao Li
Keyword(s):  
Neural Network ◽  
Low Cost ◽  
Cost Weight ◽  
Security Enhancement

Low-Cost Hardware Implementation of Human Blood Identification Device Using Feed-Forward Artificial Neural Network on FPGA

2018 ◽  
Author(s):  
Rizki Eka Putri ◽  
Denny Darlis
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Low Cost ◽  
Image Resolution ◽  
Blood Type ◽  
Feed Forward ◽  
Testing Facility ◽  
System Input ◽  
Artificial Neural ◽  
Short Time

This article was under review for ICELTICS 2018 -- In the medical world there is still service dissatisfaction caused by lack of blood type testing facility. If the number of tested blood arise, a lot of problems will occur so that electronic devices are needed to determine the blood type accurately and in short time. In this research we implemented an Artificial Neural Network on Xilinx Spartan 3S1000 Field Programable Gate Array using XSA-3S Board to identify the blood type. This research uses blood sample image as system input. VHSIC Hardware Discription Language is the language to describe the algorithm. The algorithm used is feed-forward propagation of backpropagation neural network. There are 3 layers used in design, they are input, hidden1, and output. At hidden1layer has two neurons. In this study the accuracy of detection obtained are 92%, 92%, 92%, 90% and 86% for 32x32, 48x48, 64x64, 80x80, and 96x96 pixel blood image resolution, respectively.

scholarly journals Recurrent Neural Network for Human Activity Recognition in Embedded Systems Using PPG and Accelerometer Data

Electronics ◽  
2021 ◽  
Vol 10 (14) ◽  
pp. 1715
Author(s):  
Michele Alessandrini ◽  
Giorgio Biagetti ◽  
Paolo Crippa ◽  
Laura Falaschetti ◽  
Claudio Turchetti
Keyword(s):  
Neural Network ◽  
Embedded System ◽  
Activity Recognition ◽  
Human Activity ◽  
Recurrent Neural Network ◽  
Low Cost ◽  
Low Complexity ◽  
Human Activity Recognition ◽  
Motion Artifacts ◽  
Accelerometer Data

Photoplethysmography (PPG) is a common and practical technique to detect human activity and other physiological parameters and is commonly implemented in wearable devices. However, the PPG signal is often severely corrupted by motion artifacts. The aim of this paper is to address the human activity recognition (HAR) task directly on the device, implementing a recurrent neural network (RNN) in a low cost, low power microcontroller, ensuring the required performance in terms of accuracy and low complexity. To reach this goal, (i) we first develop an RNN, which integrates PPG and tri-axial accelerometer data, where these data can be used to compensate motion artifacts in PPG in order to accurately detect human activity; (ii) then, we port the RNN to an embedded device, Cloud-JAM L4, based on an STM32 microcontroller, optimizing it to maintain an accuracy of over 95% while requiring modest computational power and memory resources. The experimental results show that such a system can be effectively implemented on a constrained-resource system, allowing the design of a fully autonomous wearable embedded system for human activity recognition and logging.

scholarly journals End-to-end convolutional neural network enables COVID-19 detection from breath and cough audio: a pilot study

2021 ◽  
Vol 7 (2) ◽  
pp. 356-362
Author(s):  
Harry Coppock ◽  
Alex Gaskell ◽  
Panagiotis Tzirakis ◽  
Alice Baird ◽  
Lyn Jones ◽  
...  
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Low Cost ◽  
Area Under The Curve ◽  
Alternative Form ◽  
Economic Damage ◽  
Audio Signals ◽  
Operating Characteristics ◽  
Data Set ◽  
Empirical Performance

BackgroundSince the emergence of COVID-19 in December 2019, multidisciplinary research teams have wrestled with how best to control the pandemic in light of its considerable physical, psychological and economic damage. Mass testing has been advocated as a potential remedy; however, mass testing using physical tests is a costly and hard-to-scale solution.MethodsThis study demonstrates the feasibility of an alternative form of COVID-19 detection, harnessing digital technology through the use of audio biomarkers and deep learning. Specifically, we show that a deep neural network based model can be trained to detect symptomatic and asymptomatic COVID-19 cases using breath and cough audio recordings.ResultsOur model, a custom convolutional neural network, demonstrates strong empirical performance on a data set consisting of 355 crowdsourced participants, achieving an area under the curve of the receiver operating characteristics of 0.846 on the task of COVID-19 classification.ConclusionThis study offers a proof of concept for diagnosing COVID-19 using cough and breath audio signals and motivates a comprehensive follow-up research study on a wider data sample, given the evident advantages of a low-cost, highly scalable digital COVID-19 diagnostic tool.

scholarly journals Architecture-Accuracy Co-optimization of ReRAM-based Low-cost Neural Network Processor

2020 ◽  
Author(s):  
Segi Lee ◽  
Sugil Lee ◽  
Jongeun Lee ◽  
Jong-Moon Choi ◽  
Do-Wan Kwon ◽  
...  
Keyword(s):  
Neural Network ◽  
Low Cost ◽  
Network Processor

scholarly journals BengaliNet: A Low-Cost Novel Convolutional Neural Network for Bengali Handwritten Characters Recognition

2021 ◽  
Vol 11 (15) ◽  
pp. 6845
Author(s):  
Abu Sayeed ◽  
Jungpil Shin ◽  
Md. Al Mehedi Hasan ◽  
Azmain Yakin Srizon ◽  
Md. Mehedi Hasan
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Network Architecture ◽  
Character Recognition ◽  
High Performance ◽  
Low Cost ◽  
Traditional Learning ◽  
Neural Network Architecture ◽  
Handwritten Character Recognition ◽  
Handwritten Character

As it is the seventh most-spoken language and fifth most-spoken native language in the world, the domain of Bengali handwritten character recognition has fascinated researchers for decades. Although other popular languages i.e., English, Chinese, Hindi, Spanish, etc. have received many contributions in the area of handwritten character recognition, Bengali has not received many noteworthy contributions in this domain because of the complex curvatures and similar writing fashions of Bengali characters. Previously, studies were conducted by using different approaches based on traditional learning, and deep learning. In this research, we proposed a low-cost novel convolutional neural network architecture for the recognition of Bengali characters with only 2.24 to 2.43 million parameters based on the number of output classes. We considered 8 different formations of CMATERdb datasets based on previous studies for the training phase. With experimental analysis, we showed that our proposed system outperformed previous works by a noteworthy margin for all 8 datasets. Moreover, we tested our trained models on other available Bengali characters datasets such as Ekush, BanglaLekha, and NumtaDB datasets. Our proposed architecture achieved 96–99% overall accuracies for these datasets as well. We believe our contributions will be beneficial for developing an automated high-performance recognition tool for Bengali handwritten characters.

Non-invasive intelligent monitoring system for fault detection in induction motor based on bio piezoelectric sensor using ANN

2022 ◽  
Author(s):  
Massine GANA ◽  
Hakim ACHOUR ◽  
Kamel BELAID ◽  
Zakia CHELLI ◽  
Mourad LAGHROUCHE ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Induction Motor ◽  
Vibration Analysis ◽  
Low Cost ◽  
Piezoelectric Sensor ◽  
Integrated System ◽  
Easy Access ◽  
Non Invasive ◽  
Artificial Neural

Abstract This paper presents a design of a low-cost integrated system for the preventive detection of unbalance faults in an induction motor. In this regard, two non-invasive measurements have been collected then monitored in real time and transmitted via an ESP32 board. A new bio-flexible piezoelectric sensor developed previously in our laboratory, was used for vibration analysis. Moreover an infrared thermopile was used for non-contact temperature measurement. The data is transmitted via Wi-Fi to a monitoring station that intervenes to detect an anomaly. The diagnosis of the motor condition is realized using an artificial neural network algorithm implemented on the microcontroller. Besides, a Kalman filter is employed to predict the vibrations while eliminating the noise. The combination of vibration analysis, thermal signature analysis and artificial neural network provides a better diagnosis. It ensures efficiency, accuracy, easy access to data and remote control, which significantly reduces human intervention.

Dangerous Scenes Recognition During Hoisting Based on Faster Region-Based Convolutional Neural Network

2018 ◽  
Author(s):  
Hongguo Su ◽  
Mingyuan Zhang ◽  
Shengyuan Li ◽  
Xuefeng Zhao
Keyword(s):  
Neural Network ◽  
Object Detection ◽  
Convolutional Neural Network ◽  
Image Classification ◽  
State Of The Art ◽  
Spatial Location ◽  
Average Precision ◽  
Practical Applications ◽  
Security Enhancement ◽  
Human Interactions

In the last couple of years, advancements in the deep learning, especially in convolutional neural networks, proved to be a boon for the image classification and recognition tasks. One of the important practical applications of object detection and image classification can be for security enhancement. If dangerous objects or scenes can be identified automatically, then a lot of accidents can be prevented. For this purpose, in this paper we made use of state-of-the-art implementation of Faster Region-based Convolutional Neural Network (Faster R-CNN) based on the monitoring video of hoisting sites to train a model to detect the dangerous object and the worker. By extracting the locations of them, object-human interactions during hoisting, mainly for changes in their spatial location relationship, can be understood whereby estimating whether the scene is safe or dangerous. Experimental results showed that the pre-trained model achieved good performance with a high mean average precision of 97.66% on object detection and the proposed method fulfilled the goal of dangerous scenes recognition perfectly.

scholarly journals Design and multichannel electromyography system-based neural network control of a low-cost myoelectric prosthesis hand

2021 ◽  
Vol 12 (1) ◽  
pp. 69-83
Author(s):  
Saygin Siddiq Ahmed ◽  
Ahmed R. J. Almusawi ◽  
Bülent Yilmaz ◽  
Nuran Dogru
Keyword(s):  
Neural Network ◽  
Control Method ◽  
Low Cost ◽  
Hand Movement ◽  
Cost Effective ◽  
Network Control ◽  
Human Hand ◽  
Prosthetic Hand ◽  
Myoelectric Prosthesis ◽  
System File

Abstract. This study introduces a new control method for electromyography (EMG) in a prosthetic hand application with a practical design of the whole system. The hand is controlled by a motor (which regulates a significant part of the hand movement) and a microcontroller board, which is responsible for receiving and analyzing signals acquired by a Myoware muscle device. The Myoware device accepts muscle signals and sends them to the controller. The controller interprets the received signals based on the designed artificial neural network. In this design, the muscle signals are read and saved in a MATLAB system file. After neural network program processing by MATLAB, they are then applied online to the prosthetic hand. The obtained signal, i.e., electromyogram, is programmed to control the motion of the prosthetic hand with similar behavior to a real human hand. The designed system is tested on seven individuals at Gaziantep University. Due to the sufficient signal of the Mayo armband compared to Myoware sensors, Mayo armband muscle is applied in the proposed system. The discussed results have been shown to be satisfactory in the final proposed system. This system was a feasible, useful, and cost-effective solution for the handless or amputated individuals. They have used the system in their day-to-day activities that allowed them to move freely, easily, and comfortably.

Sign in / Sign up

Export Citation Format

Share Document