Fabrication of Fe-Ni Ultrafine Particles Epoxy Composite Film Using the LbL Assisted Composite Plating Method

A Cu brazing sheet has been developed using a Cu-P composite plating method. A Cu-P composite plating layer, which contains 7mass%P, was formed on a Cu plate with a copper sulfate solution including P particles. The melting start temperature of the Cu-P composite layer was determined to be approximately 765°C. Microstructure and joint strength of a brazed joint with the Cu-P composite layer were investigated and compared with those of the joint with a conventional Cu-7P filler foil. As the results of the study, it was clarified that the Cu-P composite layer developed is feasible to use as a brazing material for Cu and Cu alloys.

Download Full-text

Effects of alignment of graphene flakes on water permeability of graphene-epoxy composite film

2014 IEEE 64th Electronic Components and Technology Conference (ECTC) ◽

10.1109/ectc.2014.6897618 ◽

2014 ◽

Cited By ~ 2

Author(s):

Seong-Yoon Jung ◽

Kyung-Wook Paik

Keyword(s):

Composite Film ◽

Water Permeability ◽

Epoxy Composite ◽

Graphene Flakes

Download Full-text

Study on Plating Bath Preparation Method of Novel Nano-Composite Plating

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.546-547.13 ◽

2012 ◽

Vol 546-547 ◽

pp. 13-18

Author(s):

Zhen Sheng Xia ◽

Ben Sheng Zhang ◽

De Yao Zhao

Keyword(s):

Mechanical Properties ◽

Preparation Method ◽

High Accuracy ◽

Advanced Technology ◽

Surface Wear ◽

Properties Of Coatings ◽

Plating Bath ◽

Nano Composite ◽

Composite Plating ◽

Plating Method

This article studies plating bath preparation method of novel nano-composite plating technology to improve properties of coatings when repairing the wear of equipments surface with the application of composite plating technology. The Nanoparticles of plating bath use Al2O3, metal substrates use Fe-based nano-composite plating coatings of Fe. The liquids ingredients of plating bath are prepared with ferric chloride and hydrochloric acid. The experiments of mechanical properties indicate that this plating method is an advanced technology on repairing the surface wear, which can effectively enhance the coatings properties of hardness, strength and wear resistance, which especially is suitable for the restoration to the wear of the high accuracy metal components of important equipments

Download Full-text

Fabrication of AgNWs-epoxy composite film and its application in flexible touch panel

Chinese Journal of Liquid Crystals and Displays ◽

10.3788/yjyxs20183311.0918 ◽

2018 ◽

Vol 33 (11) ◽

pp. 918-924

Author(s):

许钰旺 XU Yu-wang ◽

龚又又 GONG You-you ◽

王力 WANG Li ◽

刘贵师 LIU Gui-shi ◽

杨柏儒 YANG Bo-ru

Keyword(s):

Composite Film ◽

Epoxy Composite ◽

Touch Panel

Download Full-text

Distribution Control of Dispersed Particles in a Film Fabricated by Composite Plating Method Using a High Magnetic Field

Journal of the Japan Institute of Metals and Materials ◽

10.2320/jinstmet.69.257 ◽

2005 ◽

Vol 69 (2) ◽

pp. 257-262 ◽

Cited By ~ 10

Author(s):

Takashi Yamada ◽

Shigeo Asai

Keyword(s):

Magnetic Field ◽

High Magnetic Field ◽

Composite Plating ◽

Dispersed Particles ◽

Plating Method

Download Full-text

Preparation of Ni-P-Al2O3 Composite Film on Mild Steel with High Resistance to Corrosion and Wear

Materials Science Forum ◽

10.4028/www.scientific.net/msf.750.31 ◽

2013 ◽

Vol 750 ◽

pp. 31-35

Author(s):

Rong Guang Wang ◽

Hiroki Sawada ◽

Nan Wang ◽

Jian Nie

Keyword(s):

Mild Steel ◽

Composite Film ◽

Cross Section ◽

Corrosion And Wear ◽

Al2o3 Composite ◽

Plating Method ◽

Mean Diameter ◽

The Mean ◽

Plating Solution ◽

Electroless Plating Method

The Ni-P-Al2O3 composite film was coated on mild steel of SS400 with electroless plating method. In this process, different sizes of Al2O3 particles and different blended amounts of Al2O3 particles into the plating solution were applied. From the surface and cross section observation, it is known that the Al2O3 particles were uniformly dispersed in the Ni-P alloy. The highest corrosion resistance and the highest wear resistance of the Ni-P-Al2O3 composite film were obtained when adding Al2O3 particles with the mean diameter of 0.05μm into the plating solution at the blended amount of 1.0g/L.

Download Full-text