Surrounding tissues affect the passive mechanics of the vessel wall: theory and experiment

2007 ◽  
Vol 293 (6) ◽  
pp. H3290-H3300 ◽  
Author(s):  
Yi Liu ◽  
Charles Dang ◽  
Marisa Garcia ◽  
Hans Gregersen ◽  
Ghassan S. Kassab
Keyword(s):  
Vessel Wall ◽  
Circumferential Stress ◽  
Stretch Ratio ◽  
Surrounding Tissue ◽  
Stress And Strain ◽  
Cross Sectional ◽  
Vascular Physiology ◽  
Intravascular Pressure

The stress and strain in the vessel wall are important determinants of vascular physiology and pathophysiology. Vessels are constrained radially by the surrounding tissue. The hypothesis in this work is that the surrounding tissue takes up a considerable portion of the intravascular pressure and significantly reduces the wall strain and stress. Ten swine of either sex were used to test this hypothesis. An impedance catheter was inserted into the carotid or femoral artery, and after mechanical preconditioning pressure-cross-sectional area relations were obtained with the surrounding tissue intact and dissected away (untethered), respectively. The radial constraint of the surrounding tissue was quantified as an effective perivascular pressure on the outer surface of the vessel, which was estimated as 50% or more of the intravascular pressure. For carotid arteries at pressure of 100 mmHg, the circumferential wall stretch ratio in the intact state was ∼20% lower than in the untethered state and the average circumferential stress was reduced by ∼70%. For femoral arteries, the reductions were ∼15% and 70%, respectively. These experimental data support the proposed hypothesis and suggest that in vitro and in vivo measurements of the mechanical properties of vessels must be interpreted with consideration of the constraint of the surrounding tissue.

Effect of Surrounding Tissue on Vessel Fluid and Solid Mechanics

2004 ◽  
Vol 126 (6) ◽  
pp. 760-769 ◽  
Author(s):  
Wei Zhang ◽  
Carly Herrera ◽  
Satya N. Atluri ◽  
Ghassan S. Kassab
Keyword(s):  
Vessel Wall ◽  
Solid Mechanics ◽  
Circumferential Stress ◽  
Wall Stress ◽  
Surrounding Tissue ◽  
External Loading ◽  
Stress And Strain ◽  
Element Analysis ◽  
Important Health ◽  
Sequential Coupling

There is no doubt that atherosclerosis is one of the most important health problems in the Western Societies. It is well accepted that atherosclerosis is associated with abnormal stress and strain conditions. A compelling observation is that the epicardial arteries develop atherosclerosis while the intramural arteries do not. Atherosclerotic changes involving the epicardial portion of the coronary artery stop where the artery penetrates the myocardium. The objective of the present study is to understand the fluid and solid mechanical differences between the two types of vessels. A finite element analysis was employed to investigate the effect of external tissue contraction on the characteristics of pulsatile blood flow and the vessel wall stress distribution. The sequential coupling of fluid-solid interaction (FSI) revealed that the changes of flow velocity and wall shear stress, in response to cyclical external loading, appear less important than the circumferential stress and strain reduction in the vessel wall under the proposed boundary conditions. These results have important implications since high stresses and strains can induce growth, remodeling, and atherosclerosis; and hence we speculate that a reduction of stress and strain may be atheroprotective. The importance of FSI in deformable vessels with pulsatile flow is discussed and the fluid and solid mechanics differences between epicardial and intramural vessels are highlighted.

A novel ultrasound technique to study the biomechanics of the human esophagus in vivo

2002 ◽  
Vol 282 (5) ◽  
pp. G785-G793 ◽  
Author(s):  
Torahiko Takeda ◽  
Ghassan Kassab ◽  
Jianmin Liu ◽  
James L. Puckett ◽  
Rishi R. Mittal ◽  
...  
Keyword(s):  
Circumferential Stress ◽  
In Vivo Studies ◽  
Esophageal Wall ◽  
Stress And Strain ◽  
Stress Strain ◽  
Healthy Human ◽  
Ultrasound Technique ◽  
Human Esophagus

The objectives of this study were to validate a novel ultrasound technique and to use it to study the circumferential stress-strain properties of the human esophagus in vivo. A manometric catheter equipped with a high-compliance bag and a high-frequency intraluminal ultrasonography probe was used to record esophageal pressure and images. Validation studies were performed in vitro followed by in vivo studies in healthy human subjects. Esophageal distensions were performed with either an isovolumic (5–20 ml of water) or with an isobaric (10–60 mmHg) technique. Sustained distension was also performed for 3 min in each subject. The circumferential wall stress and strain were calculated. In vitro studies indicate that the ultrasound technique can make measurements of the esophageal wall with an accuracy of 0.01 mm. The in vivo studies provide the necessary data to compute the Kirchhoff's stress, Green's strain, and Young's elastic modulus during esophageal distensions. The stress-strain relationship revealed a linear shape, the slope of which corresponds to the Young's modulus. During sustained distensions, we found dynamic changes of stress and strain during the period of distension. We describe and validate a novel ultrasound technique that allows measurement of biomechanical properties of the esophagus in vivo in humans.

Thrombogenicity of the Injured Vessel Wall – Role of Antithrombin and Heparin

1994 ◽  
Vol 71 (01) ◽  
pp. 147-153 ◽  
Author(s):  
Siw Frebelius ◽  
Ulf Hedin ◽  
Jesper Swedenborg
Keyword(s):  
Vessel Wall ◽  
Antithrombin Iii ◽  
Rabbit Aorta ◽  
Continuous Treatment ◽  
Balloon Injury ◽  
Coagulant Activity ◽  
Risk For Thrombosis ◽  
Inhibition Of Thrombin

SummaryThe thrombogenicity of the vessel wall after endothelial denudation is partly explained by an impaired inhibition of thrombin on the subendothelium. We have previously reported that thrombin coagulant activity can be detected on the vessel wall after balloon injury in vivo. The glycosaminoglycans of the subendothelium differ from those of the endothelium and have a lower catalyzing effect on antithrombin III, but inhibition of thrombin can still be augmented by addition of antithrombin III to the injured vessel surface.In this study the effect of antithrombin III and heparin on thrombin coagulant activity on the vessel wall was studied after in vivo balloon injury of the rabbit aorta using biochemical and immunohistochemical methods and thrombin was analysed after excision of the vessel. Continuous treatment with heparin, lasting until sacrifice of the animal, or treatment with antithrombin III resulted in significant reduction of thrombin coagulant activity on the injured aorta. Heparin given only in conjunction with the injury did not prevent thrombin coagulant activity or deposition of fibrin on the surface.The capacity of the injured vessel wall to inhibit thrombin in vitro was improved on aortic segments obtained from animals receiving antithrombin III but not from those given heparin. It is concluded that treatment with antithrombin III interferes with thrombin appearance on the vessel wall after injury and thereby reduces the risk for thrombosis.

scholarly journals Occupational Exposure to Carbon Nanotubes and Carbon Nanofibres: More Than a Cobweb

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 745
Author(s):  
Enrico Bergamaschi ◽  
Giacomo Garzaro ◽  
Georgia Wilson Jones ◽  
Martina Buglisi ◽  
Michele Caniglia ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Animal Studies ◽  
Chemical Properties ◽  
Biological Behavior ◽  
Cross Sectional ◽  
Carbon Nanofibres ◽  
Material Entity ◽  
Cross Sectional Design

Carbon nanotubes (CNTs) and carbon nanofibers (CNFs) are erroneously considered as singular material entities. Instead, they should be regarded as a heterogeneous class of materials bearing different properties eliciting peculiar biological outcomes both in vitro and in vivo. Given the pace at which the industrial production of CNTs/CNFs is increasing, it is becoming of utmost importance to acquire comprehensive knowledge regarding their biological activity and their hazardous effects in humans. Animal studies carried out by inhalation showed that some CNTs/CNFs species can cause deleterious effects such as inflammation and lung tissue remodeling. Their physico-chemical properties, biological behavior and biopersistence make them similar to asbestos fibers. Human studies suggest some mild effects in workers handling CNT/CNF. However, owing to their cross-sectional design, researchers have been as yet unable to firmly demonstrate a causal relationship between such an exposure and the observed effects. Estimation of acceptable exposure levels should warrant a proper risk management. The aim of this review is to challenge the conception of CNTs/CNFs as a single, unified material entity and prompt the establishment of standardized hazard and exposure assessment methodologies able to properly feeding risk assessment and management frameworks.

scholarly journals Rectus Femoris Mimicking Ultrasound Phantom for Muscle Mass Assessment: Design, Research, and Training Application

2021 ◽  
Vol 10 (12) ◽  
pp. 2721
Author(s):  
Nobuto Nakanishi ◽  
Shigeaki Inoue ◽  
Rie Tsutsumi ◽  
Yusuke Akimoto ◽  
Yuko Ono ◽  
...  
Keyword(s):  
Measurement Accuracy ◽  
Rectus Femoris ◽  
Cross Sectional Area ◽  
Sectional Area ◽  
Cross Sectional ◽  
Phantom Model ◽  
Ultrasound Measurements ◽  
Ultrasound Phantom

Ultrasound has become widely used as a means to measure the rectus femoris muscle in the acute and chronic phases of critical illness. Despite its noninvasiveness and accessibility, its accuracy highly depends on the skills of the technician. However, few ultrasound phantoms for the confirmation of its accuracy or to improve technical skills exist. In this study, the authors created a novel phantom model and used it for investigating the accuracy of measurements and for training. Study 1 investigated how various conditions affect ultrasound measurements such as thickness, cross-sectional area, and echogenicity. Study 2 investigated if the phantom can be used for the training of various health care providers in vitro and in vivo. Study 1 showed that thickness, cross-sectional area, and echogenicity were affected by probe compression strength, probe angle, phantom compression, and varying equipment. Study 2 in vitro showed that using the phantom for training improved the accuracy of the measurements taken within the phantom, and Study 2 in vivo showed the phantom training had a short-term effect on improving the measurement accuracy in a human volunteer. The new ultrasound phantom model revealed that various conditions affected ultrasound measurements, and phantom training improved the measurement accuracy.

scholarly journals Injectable non-leaching tissue-mimetic bottlebrush elastomers as an advanced platform for reconstructive surgery

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Erfan Dashtimoghadam ◽  
Farahnaz Fahimipour ◽  
Andrew N. Keith ◽  
Foad Vashahi ◽  
Pavel Popryadukhin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Reconstructive Surgery ◽  
Biomedical Applications ◽  
The Body ◽  
Surrounding Tissue ◽  
Curing Time ◽  
Materials Used ◽  
Significant Health

AbstractCurrent materials used in biomedical devices do not match tissue’s mechanical properties and leach various chemicals into the body. These deficiencies pose significant health risks that are further exacerbated by invasive implantation procedures. Herein, we leverage the brush-like polymer architecture to design and administer minimally invasive injectable elastomers that cure in vivo into leachable-free implants with mechanical properties matching the surrounding tissue. This strategy allows tuning curing time from minutes to hours, which empowers a broad range of biomedical applications from rapid wound sealing to time-intensive reconstructive surgery. These injectable elastomers support in vitro cell proliferation, while also demonstrating in vivo implant integrity with a mild inflammatory response and minimal fibrotic encapsulation.

670 Delayed Enzymatic Debridement of Burn Wounds using the Proteolytic Gel SN514

2021 ◽  
Vol 42 (Supplement_1) ◽  
pp. S191-S192
Author(s):  
Angela R Jockheck-Clark ◽  
Randolph Stone ◽  
Michelle Holik ◽  
Lucy Schaffer ◽  
Shanmugasundaram Natesan ◽  
...  
Keyword(s):  
Burn Injury ◽  
Vehicle Control ◽  
Surrounding Tissue ◽  
Burn Wound ◽  
Burn Wounds ◽  
Delayed Treatment ◽  
Medical Evacuation ◽  
Contamination Levels

Abstract Introduction Thermal burns account for 5–10% of casualties sustained in present-day conflicts and are expected to be one of the most common wounds to occur in future conflicts. In prolonged field care (PFC) situations, medical evacuation could be delayed for days. During this time, burn wounds can become infected, detrimentally impact neighboring tissue, and cause systemic immune responses. Therefore, it is essential to test and evaluate non-surgical debridement agents that could be implemented prior to reaching a Role 3 military treatment facility. This work details how the proprietary proteolytic gel SN514 impacts burn debridement when applied within a PFC-like timeline. SN514 contains an enzyme formulation that is thermostable, easy to apply, and selectively degrades non-viable tissue in vitro and in vivo. Methods Deep-partial thickness contact burns were created using an established porcine model and covered with gauze or an antimicrobial incise drape. Four days later, the burns were treated with one of five treatments: 0.2% SN514, 0.8% SN514, a vehicle control, gauze, or an antimicrobial silver dressing. Treatments were re-applied every 24 hours for 72 to 96 hours. The effects of the treatment regiments were compared histologically. Biopsies were also taken to monitor bacterial contamination levels. Results Burns treated with SN514 were partially debrided and visually distinct from those treated with gauze, the silver dressing, or the vehicle control. Preliminary analyses suggest that SN514-treated burns that had been covered with “dry” gauze had a much lower debridement efficiency than those treated with the incise drape. This suggests that SN514 debridement efficiency may depend on the presence of a moist eschar. Preliminary analyses also suggest that there was little difference in burn wound bacterial counts among the five treatment groups. Conclusions SN514 is able to debride burns that experienced delayed treatment, without any evidence of harm to the surrounding tissue or evidence of exacerbating the original burn injury. SN514-treated wounds displayed little to no blood loss and did not increase burn wound infection levels compared to wounds treated with gauze or an antimicrobial silver dressing.

scholarly journals Fatty acid is a potential agent for bone tissue induction: In vitro and in vivo approach

2017 ◽  
Vol 242 (18) ◽  
pp. 1765-1771 ◽  
Author(s):  
Guinea BC Cardoso ◽  
Erivelto Chacon ◽  
Priscila GL Chacon ◽  
Pedro Bordeaux-Rego ◽  
Adriana SS Duarte ◽  
...  
Keyword(s):  
Stem Cells ◽  
Oleic Acid ◽  
Fatty Acid ◽  
Bone Tissue ◽  
In Vivo Studies ◽  
Surrounding Tissue ◽  
Bone Induction ◽  
Acid Addition

Our hypothesis was to investigate the fatty acid potential as a bone induction factor. In vitro and in vivo studies were performed to evaluate this approach. Oleic acid was used in a 0.5 wt.% concentration. Polycaprolactone was used as the polymeric matrix by combining solvent-casting and particulate-leaching techniques, with a final porosity of 70 wt.%, investigated by SEM images. Contact angle measurements were produced to investigate the influence of oleic acid on polycaprolactone chains. Cell culture was performed using adipocyte-derived stem cells to evaluate biocompatibility and bioactivity properties. In addition, in vivo studies were performed to evaluate the induction potential of oleic acid addition. Adipocyte-derived stem cells were used to provide differentiation after 21 days of culture. Likewise, information were obtained with in vivo data and cellular invagination was observed on both scaffolds (polycaprolactone and polycaprolactone /oleic acid); interestingly, the scaffold with oleic acid addition demonstrated that cellular migrations are not related to the surrounding tissue, indicating bioactive potential. Our hypothesis is that fatty acid may be used as a potential induction factor for bone tissue engineering. The study’s findings indicate oleic acid as a possible agent for bone induction, according to data on cell differentiation, proliferation, and migration. Impact statement The biomaterial combined in this study on bone regeneration is innovative and shows promising results in the treatment of bone lesions. Polycaprolactone (PCL) and oleic acid have been studied separately. In this research, we combined biomaterials to assess the stimulus and the speed of bone healing.

scholarly journals Biocompatibility Evaluation of Electrospun Scaffolds of Poly (L-Lactide) with Pure and Grafted Hydroxyapatite

2017 ◽  
Vol 58 (4) ◽  
Author(s):  
José Manuel Cornejo-Bravo ◽  
Luis Jesús Villarreal-Gómez ◽  
Ricardo Vera-Graziano ◽  
María Raquel Vega-Ríos ◽  
José Luis Pineda-Camacho ◽  
...  
Keyword(s):  
Bacterial Adhesion ◽  
Neutral Red ◽  
C2c12 Cells ◽  
Surrounding Tissue ◽  
Neutral Red Assay ◽  
Electrospun Scaffolds ◽  
Muscle Tissues ◽  
Hematoxylin Eosin

<p>The objective of this work was to evaluate the biocompatibility of scaffolds of poly(<em>L</em>-lactide) with pure and grafted hydroxyapatite, at various concentrations of reinforcement. The biocompatibility tests were carried out <em>in vivo </em>in Wistar rats by implanting the material into the subcutaneous and muscle tissues from 1 to 14 weeks and evaluating the surrounding tissue stained with hematoxylin-eosin. For <em>in vitro </em>assays, MTT and neutral red assay were used to evaluate any cytotoxicity in Mioblast Muscle C2C12 Cells (ATCC® CRL-1772™) and Bovine Coronary Artery Endothelial Cells (BCAEC); <em>Escherichia coli </em>and <em>Staphylococcus aureus </em>were used to evaluate bacterial adhesion. All variants of scaffolds provoked a mild inflammatory response, without showing necrosis. No evidence of cytotoxicity was presented in cell viability tests and good bacterial cell adhesion was visualized for all of the materials studied.</p>

scholarly journals Injectable Non-leaching Tissue-mimetic Bottlebrush Elastomers: A New Platform for Advancing Reconstructive Surgery

2020 ◽  
Author(s):  
Erfan Dashtimoghadam ◽  
Farahnaz Fahimipour ◽  
Andrew Keith ◽  
Foad Vashahi ◽  
Pavel Popryadukhin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Reconstructive Surgery ◽  
Biomedical Applications ◽  
The Body ◽  
Surrounding Tissue ◽  
Curing Time ◽  
Materials Used ◽  
Significant Health

Abstract Current materials used in biomedical devices do not match tissue’s mechanical properties and leach various chemicals into the body. These deficiencies pose significant health risks that are further exacerbated by invasive implantation procedures. Herein, we leverage the brush-like polymer architecture to design and administer minimally invasive injectable elastomers that cure in vivo into leachable-free implants with mechanical properties matching the surrounding tissue. This strategy allows tuning curing time from minutes to hours, which empowers a broad range of biomedical applications from rapid wound sealing to time-intensive reconstructive surgery. These injectable elastomers support in vitro cell proliferation, while also demonstrating in vivo implant integrity with a mild inflammatory response and minimal fibrotic encapsulation.

Sign in / Sign up

Export Citation Format

Share Document