scholarly journals Inhibition of Mild Steel Corrosion in Sulphuric Acid Using Esomeprazole and the Effect of Iodide Ion Addition

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
G. Karthik ◽  
M. Sundaravadivelu
Keyword(s):  
Mild Steel ◽  
Steel Surface ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Effect Of Temperature ◽  
Mild Steel Surface ◽  
Iodide Ions ◽  
Adsorption Processes ◽  
Pharmaceutically Active Compound

The inhibition of the corrosion of mild steel in 1 M H2SO4 solution by the pharmaceutically active compound esomeprazole (ESP) has been investigated by using weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy measurements. The effect of temperature on the corrosion behavior with the addition of different concentrations of ESP was studied in the temperature range of 30–60°C. Results obtained revealed that the inhibition efficiency increased with the increase in concentration of the inhibitor but decreased with the increase in temperature. The addition of KI increased the inhibition of ESP to a considerable extent. The experimental results suggest that the presence of iodide ions in the solution stabilized the adsorption of the ESP molecule on the mild steel surface, thereby improving the inhibition efficiency. Polarization curves indicated that the ESP belonged to a mixed-type inhibitor. Adsorption of the inhibitor on the mild steel surface is found to obey the Langmuir adsorption isotherm. Some thermodynamic functions of dissolution and adsorption processes were also determined. Surface analysis via scanning electron microscope (SEM) and atomic force microscope (AFM) shows a significant improvement in the surface morphology of the mild steel plate.

Electrochemical behaviour of acetyl G as corrosion inhibitor for mild steel in acid medium

2015 ◽  
Vol 44 (6) ◽  
pp. 371-378 ◽  
Author(s):  
Y. Sangeetha ◽  
S. Meenakshi ◽  
C. Sairam Sundaram
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Acid Medium ◽  
Steel Surface ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Electrochemical Behaviour ◽  
Green Inhibitor ◽  
Content Type ◽  
Mild Steel Surface

Purpose – The purpose of this paper is to develop an eco-friendly corrosion inhibitor for mild steel in 1 M HCl. Design/methodology/approach – A pharmaceutical drug acetyl G was investigated for its corrosion inhibition efficiency using weight loss method, potentiodynamic polarisation and electrochemical impedance spectroscopy. Findings – The inhibition efficiency increased with increase in inhibitor concentration. Results from polarisation studies revealed mixed type of inhibition. Impedance studies, scanning electron microscopy and Fourier transform spectroscopy confirm the adsorption of inhibitor on the mild steel surface. Research limitations/implications – The drug acetyl G has sulphur and nitrogen atoms which effectively block the corrosion of mild steel and is non-toxic and has good inhibition efficiency. Practical implications – This method provides an excellent, non-toxic and cost-effective material as a corrosion inhibitor for mild steel in acid medium. Originality/value – Application of this drug as a corrosion inhibitor has not been reported yet in the literature. Replacing the organic inhibitors, this green inhibitor shows excellent inhibition efficiency. This is adsorbed excellently on the mild steel surface due to the presence of long chain and hetero atoms. Thus, the drug retards the corrosion reaction.

scholarly journals Adsorption and Corrosion Inhibition Effect ofN-(l-Morpholinobenzyl)urea onMild Steel in Acidic Medium

2011 ◽  
Vol 8 (2) ◽  
pp. 621-628 ◽  
Author(s):  
M. Anwar Sathiq ◽  
A. Jamal Abdul Nasser ◽  
P. Mohamed Sirajudeen
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Potentiodynamic Polarization ◽  
Steel Surface ◽  
Electrochemical Impedance ◽  
Effect Of Temperature ◽  
Protective Film ◽  
Acid Attack ◽  
Transfer Resistance ◽  
Mild Steel Surface

The influence ofN-(l-morpholinobenzyl)urea (MBU) on corrosion inhibition of mild steel in 1 M HCl was studied by weight loss, effect of temperature, potentiodynamic polarization and electrochemical impedance spectroscopy. The experimental results showed that the inhibition efficiency increases with increasing of MBU concentrations but decreases with increasing temperatures. The adsorption of MBU on the mild steel surface obeyed the Temkin’s adsorption isotherm. Potentiodynamic polarization curves showed that MBU acted as a cathodic inhibitor predominantly in hydrochloric acid. This was supported by the impedance measurements which showed a change in the charge transfer resistance and double layer capacitance indicating adsorption of MBU on the mild steel surface. Protective film formation against the acid attack is confirmed by SEM.

Corrosion Inhibition of Mild Steel by Electrodeposited Poly(M-Aminophenol) Coating

2021 ◽  
Vol 317 ◽  
pp. 498-505
Author(s):  
Sabrina M. Yahaya ◽  
Mohamad Kamal Harun ◽  
Ismaliza Ismail ◽  
Rosmamuhamadani Ramli
Keyword(s):  
Mild Steel ◽  
Steel Surface ◽  
Electrochemical Impedance ◽  
Impedance Measurement ◽  
Barrier Properties ◽  
Electrical Circuit ◽  
Significant Drop ◽  
Mild Steel Surface ◽  
Barrier Resistance ◽  
And Performance

In this study, poly(m-aminophenol) (PMAP) coating was electrochemically synthesized by cyclic voltammetry (CV) on mild steel surface to investigate the effects of its barrier protection within the scope of its electrochemical impedance towards further oxidation of the mild steel substrates. The developed PMAP coating were characterized by Fourier Transform Infrared (FTIR) spectroscopy and Field Emission Scanning Electron Microscopy (FESEM). The barrier resistance ability of PMAP coating towards corrosion of mild steel was determined in 0.5 M aqueous sodium chloride solution (NaCl) at various immersion times by the electrochemical impedance spectroscopy (EIS). The barrier properties were interpreted through impedance measurement using Nyquist and Bode plots. Equivalent electrical circuit models derived from the plots were employed to describe the coating barrier behaviour and performance. Data obtained showed that, the oxidation peak of PMAP coating were observed at potential +1.0 V (Ag/AgCl). The micrograph of FESEM indicates the formation of a dense and continous PMAP coatings. In FTIR analyses, the presence of peak around 1082 cm-1 ascribed to C–O–C etheric linkage which supported the formation of electro polymerized PMAP coating on mild steel surface. EIS measurement revealed that, PMAP coatings experienced a significant drop in total impedance values with time followed by the development of an electrochemical reactions on coating/metal interface, which indicates the gradual degradation of the barrier resistance ability of the PMAP coatings.

scholarly journals Electrochemical Impedance Spectroscopy Evaluation of Organic Coating on Mild Steel

2018 ◽  
Vol 7 (3.11) ◽  
pp. 30
Author(s):  
Zailelah Zainoldin ◽  
Hadariah Bahron ◽  
Mohamad Kamal Harun ◽  
Syaidah Athirah Dzolin
Keyword(s):  
Mild Steel ◽  
Steel Surface ◽  
Electrochemical Impedance ◽  
Organic Coating ◽  
Electrical Equivalent Circuit ◽  
Mild Steel Surface ◽  
Electro Oxidation ◽  
Nyquist Plots ◽  
Eis Measurements ◽  
Voltammetric Technique

Electro-oxidation of 4-hydroxybenzalaniline in alkaline solution on mild steel surface was successfully carried out using cyclic voltammetric technique. Results demonstrated that brownish colour appeared on the mild steel surface after the cycle of voltammetric study. The presence of film was confirmed by the EIS measurement whereas the Nyquist plots obtained from EIS measurements were fitted with suitable electrical equivalent circuit. The coated mild steel exhibit better polarization resistance than uncoated mild steel.  

scholarly journals Mitigation of Mild Steel Corrosion in Acidic Solution Using Inhibitor

2011 ◽  
Vol 8 (s1) ◽  
pp. S53-S60 ◽  
Author(s):  
M. Vishnudevan
Keyword(s):  
Mild Steel ◽  
Sodium Benzoate ◽  
Inhibition Efficiency ◽  
Acidic Solution ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Trisodium Citrate ◽  
Tafel Polarization ◽  
Mild Steel Corrosion ◽  
Maximum Inhibition

The inhibition efficiency of mild steel corrosion in HCl acidic solution containing various concentrations of mixed inhibitors were evaluated by conducting Tafel polarization and electrochemical impedance studies. The mixed inhibitors used in this present investigation were trisodium citrate and sodium benzoate. In this present investigation 0.01 N to 0.1 N concentrations of HCl was used at 30°C. Sodium benzoate present in the mixed inhibitive system enhanced the inhibition efficiency through chemisorptions. The maximum inhibition efficiency ( 95.4%) was obtained for the mixed inhibitive system containing 0.05 M citrate and 0.5 M benzoate in 0.1 N HCl.

scholarly journals Inhibition of Mild Steel Corrosion by 4-benzyl-1-(4-oxo-4-phenylbutanoyl)thiosemicarbazide: Gravimetrical, Adsorption and Theoretical Studies

Lubricants ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 93
Author(s):  
Ahmed A. Alamiery ◽  
Wan Nor Roslam Wan Isahak ◽  
Mohd S. Takriff
Keyword(s):  
Dft Calculations ◽  
Mild Steel ◽  
Active Sites ◽  
Steel Surface ◽  
Protective Efficacy ◽  
Steel Corrosion ◽  
Inhibitory Effect ◽  
Inhibitor Concentration ◽  
Mild Steel Surface ◽  
Mild Steel Corrosion

Gravimetric measurements were applied to study the inhibitory effect of 4-benzyl-1-(4-oxo-4-phenylbutanoyl)thiosemicarbazide (BOT) on the corrosion of mild steel in 1.0 M HCl. BOT has a good inhibitory efficacy of 92.5 percent at 500 ppm, according to weight loss results. The effect of inhibitor concentration on the mild corrosion behavior of steel was investigated and it was discovered that the higher the inhibitor concentration, the higher the damping efficiency. The results confirm that BOT is an effective corrosion inhibitor for mild steel in the presence of 1.0 M HCl. Furthermore, the higher protection efficiency with increasing temperature and the free energy value showed that BOT molecules participate in both chemisorption (coordination bonds between the active sites of BOT molecules and d-orbital of iron atoms) and physisorption (through the physical interactions on the mild steel surface). The adsorption mechanism on the mild steel surface obeys the Langmuir adsorption isotherm model. Quantum chemical calculations based on the DFT calculations were conducted on BOT. DFT calculations indicated that the protective efficacy of the tested inhibitor increased with the increase in energy of HOMO. The theoretical findings revealed that the broadly stretched linked functional groups (carbonyl and thionyl) and heteroatoms (sulfur, nitrogen and oxygen) in the structure of tested inhibitor molecules are responsible for the significant inhibitive performance, due to possible bonding with Fe atoms on the mild steel surface by donating electrons to the d-orbitals of Fe atoms. Both experimental and theoretical findings in the current investigation are in excellent harmony.

scholarly journals Electrochemical surface modification technique to impede mild steel corrosion using Perfluorooctanoic Acid.

2016 ◽  
Vol 5 (4) ◽  
pp. 247
Author(s):  
Shubha H Natarj ◽  
Venkatesha T Venkatarangaiah ◽  
Anantha N Subbarao
Keyword(s):  
Mild Steel ◽  
Steel Surface ◽  
Steel Corrosion ◽  
Perfluorooctanoic Acid ◽  
Surface Hydrophobicity ◽  
Dip Coating ◽  
Self Assembled Monolayer ◽  
Mild Steel Surface ◽  
Mild Steel Corrosion ◽  
Modification Technique

<div><p><em>The present work demonstrated that corrosion inhibition efficiency of electrochemically generated organic coat is remarkably effective than self-assembled monolayer (SAM) generated by dip coating technique. Perfluorooctanoic Acid (PFOA) is used to modify mild steel surface for effective protection. Infrared reflection absorption spectroscopy and contact angle measurements substantiate the modification of mild steel surface and its effect on surface hydrophobicity. A comparison between electrochemical properties of PFOA SAM generated by dip coat method (DC-PFOA) and PFOA coat generated by electrochemical method (EC-PFOA) is presented. Electrochemical measurements reveal that the corrosion protection efficiency of EC-PFOA (91%) is much superior to DC-PFOA (28%). </em></p></div>

scholarly journals Synergetic Effect between Phenolic Extracts of Ammi visnaga and Zea mays Formulation on the Corrosion of Mild Steel in 1 M HCl Solution

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Sarra Aourabi ◽  
Majid Driouch ◽  
Mariya Kadiri ◽  
Noura Achnine ◽  
Mouhcine Sfaira ◽  
...  
Keyword(s):  
Mild Steel ◽  
Steel Surface ◽  
Electrochemical Impedance ◽  
Synergetic Effect ◽  
Equivalent Circuit Model ◽  
Mild Steel Surface ◽  
Ammi Visnaga ◽  
Edx Analyses ◽  
Hcl Solution ◽  
Mixed Type Inhibitor

The synergetic effects between hydroethanolic extracts of A. visnaga HE (AV) and Z. mays hairs HE (ZM) on corrosion of mild steel in 1 M HCl solution was investigated at 298 K by two techniques: potentiodynamic polarization (PP) methods (Tafel and Stern & Geary) and electrochemical impedance spectroscopy (EIS). The mixture of HE (AV)/HE (ZM) acted as an efficient corrosion inhibitor and its inhibition efficiency increased with concentration up to 96.55% at 0.01 gL−1 HE (AV)/0.2 gL−1 HE (ZM). The polarization curves revealed that the mixture acted as a mixed-type inhibitor, with anodic predominant action. The EIS studies were fitted by the (Rs + CPEdl)/(Rct + CPEf/Rf) equivalent circuit model. The kinetic parameters were in favor of a physisorption character of adsorption of HE (AV)/HE (ZM) components onto the mild steel surface. The influence of exposure time on the efficiency of mixture extract was investigated. Scanning electron microscopy (SEM/EDX) analyses confirmed the formation of a protective adsorbed film upon the mild steel surface.

Musa Sapientum (Banana) Peels as Green Corrosion Inhibitor for Mild Steel

2019 ◽  
Vol 797 ◽  
pp. 230-239 ◽  
Author(s):  
Nor Roslina Rosli ◽  
Suriatie Mat Yusuf ◽  
Arina Sauki ◽  
Wan Muhamad Razlan Wan Razali
Keyword(s):  
Weight Loss ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Steel Surface ◽  
Inhibition Efficiency ◽  
Steel Corrosion ◽  
Gas Chromatography Mass Spectrometry ◽  
Banana Peel ◽  
Musa Sapientum ◽  
Peel Extract

The inhibition efficiency of Musa sapientum (banana) peel extracts at different concentrations and temperatures on mild steel corrosion in acidic solution of 1 M hydrochloric acid (HCl) were investigated by using weight loss method. The banana peel extract concentrations were tested from 300 to 500 ppm at temperature range between 25°C to 60°C. The performance of banana peel extract as an inhibitor was found compatible in the tested solution. The corrosion rates, which were calculated from the weight loss data, showed that the inhibition efficiency of the extract increased from 86.9% to 89.0% as the concentration of banana peel extract increased from 300 ppm to 500 ppm. It was also observed that the inhibition efficiency decreased as the temperature was increased from 25°C to 60°C. Characterization of the peel extract by using gas chromatography-mass spectrometry (GC-MS) has detected the presence of bioactive compounds which are responsible for the corrosion inhibition and adsorption properties on mild steel surface. Eleven major compounds have been identified as having corrosion inhibition properties. FTIR analysis confirmed the presence of functional groups of alcohols, alkanes, carbonyls, aromatics, ethers, and esters that can prevent corrosion by adsorption on steel surface.

Comparative study of 1,2,3-triazole derivatives as corrosion inhibitors of mild steel in sulphuric acid solution

2019 ◽  
Vol 66 (5) ◽  
pp. 544-555 ◽  
Author(s):  
Ilham Elazhary ◽  
My Rachid Laamari ◽  
Aziz Boutouil ◽  
Lahoucine Bahsis ◽  
Mohammadine El Haddad ◽  
...  
Keyword(s):  
Mild Steel ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Sulphuric Acid Solution ◽  
Frontier Molecular Orbital ◽  
Effect Of Temperature ◽  
Orbital Theory ◽  
Content Type ◽  
Mild Steel Corrosion ◽  
The Difference

Purpose This paper aims to study the corrosion inhibition of Methyl 2-(benzamido)-2-(4-phenyl-1H-1,2,3-triazol-1-yl) acetate (MBPTA) and Methyl 2-(benzamido)-2-(4-p-tolyl-1H-1,2,3-triazol-1-yl) acetate (MBTTA) in 1 M H2SO4 solution at 25 °C. Design/methodology/approach The authors have used weight loss measurements, electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, FT-IR, quantum chemical calculations and scanning electron microscopy (SEM) techniques. Findings The polarization measurements indicate that both compounds are mixed type inhibitors, and that MBTTA is more effective than MBPTA. The effect of temperature on the corrosion behavior using optimal concentration of MBTTA and MBPTA was studied in the temperature range 298-328 K. SEM was used to examine the morphology of the metal surface. Thermodynamic parameters were calculated and discussed. Monte Carlo simulations were applied to lookup for the most stalls configuration and adsorption energy for the interaction of inhibitors on Fe (1 1 1) interface. The difference in inhibition efficiencies between the two organic inhibitors can be clearly explained in terms of frontier molecular orbital theory. Originality/value The authors report on the comparative inhibiting effect of two new 1,4-disubstituted 1,2,3-triazoles, namely Methyl 2-(benzamido)-2-(4-phenyl-1H-1,2,3-triazol-1-yl) acetate (MBPTA) and Methyl 2-(benzamido)-2-(4-p-tolyl-1H-1, 2, 3-triazol-1-yl) acetate (MBTTA) on mild steel corrosion in 1 M H2SO4 solution.

Sign in / Sign up

Export Citation Format

Share Document