scholarly journals New Ray Tracing Method to Investigate the Various Effects on Wave Propagation in Medical Scenario: An Application of Wireless Body Area Network

2014 ◽  
Vol 2014 ◽  
pp. 1-13 ◽  
Author(s):  
M. J. Islam ◽  
A. W. Reza ◽  
A. S. M. Z. Kausar ◽  
H. Ramiah
Keyword(s):  
Wave Propagation ◽  
Ray Tracing ◽  
Wireless Body Area Network ◽  
Hospital Environment ◽  
Physiological Data ◽  
Body Area Network ◽  
Area Network ◽  
Body Area ◽  
Received Power ◽  
Tracing Method

The advent of technology with the increasing use of wireless network has led to the development of Wireless Body Area Network (WBAN) to continuously monitor the change of physiological data in a cost efficient manner. As numerous researches on wave propagation characterization have been done in intrabody communication, this study has given emphasis on the wave propagation characterization between the control units (CUs) and wireless access point (AP) in a hospital scenario. Ray tracing is a tool to predict the rays to characterize the wave propagation. It takes huge simulation time, especially when multiple transmitters are involved to transmit physiological data in a realistic hospital environment. Therefore, this study has developed an accelerated ray tracing method based on the nearest neighbor cell and prior knowledge of intersection techniques. Beside this, Red-Black tree is used to store and provide a faster retrieval mechanism of objects in the hospital environment. To prove the superiority, detailed complexity analysis and calculations of reflection and transmission coefficients are also presented in this paper. The results show that the proposed method is about 1.51, 2.1, and 2.9 times faster than the Object Distribution Technique (ODT), Space Volumetric Partitioning (SVP), and Angular Z-Buffer (AZB) methods, respectively. To show the various effects on received power in 60 GHz frequency, few comparisons are made and it is found that on average −9.44 dBm, −8.23 dBm, and −9.27 dBm received power attenuations should be considered when human, AP, and CU move in a given hospital scenario.

scholarly journals E-PAP: Enhanced Priority Aware Protocol for Reliable Communication in Wireless Body Area Network

2020 ◽  
Vol 9 (6) ◽  
pp. 340-343
Keyword(s):  
Energy Consumption ◽  
Human Body ◽  
Data Transmission ◽  
Body Movement ◽  
Wireless Body Area Network ◽  
The Body ◽  
Physiological Data ◽  
Body Area Network ◽  
Area Network ◽  
Body Area

Wireless Body Area Network (WBAN) is a collection of miniaturized sensing nodes and coordinator nodes. These sensing nodes are placed in, on and around the body for uninterrupted monitoring of physiological data for medical applications. The main application carrier of WBAN is the human body and due to human body movement and physiological changes, the WBAN traffic fluctuates greatly. This network traffic fluctuation requires good network adaptability. In addition to traffic fluctuations, energy consumption is another key problem with WBANs as sensing nodes are very small in size. This paper design a reliable protocol by extending the MAC protocol for reducing energy consumption, PAP algorithm to decide data transmission rate and JOAR algorithm to select the optimize path for the data transmission. The performance of the algorithm outperforms other state of art algorithms to shows its significance.

scholarly journals Analysis of wave propagation for wireless implantable body area network application

2019 ◽  
Vol 15 (2) ◽  
pp. 936
Author(s):  
N. H. Ramli ◽  
Haryati Jaafar ◽  
Y. S. Lee ◽  
Hazila Othman
Keyword(s):  
Wave Propagation ◽  
Wireless Body Area Network ◽  
Human Hand ◽  
Body Area Network ◽  
Area Network ◽  
Body Area ◽  
Implantable Antennas ◽  
Voxel Model ◽  
Network Application ◽  
Enhancement Technologies

The enhancement technologies of wireless body area network improved the health monitoring system. Previous work have been designed the implantable chip printed antenna at 4.8 GHz. This paper is continuing the investigation where the antenna wave propagation in term of attenuation and polarization were studied. The antenna is implanted in human hand voxel model from CST Microwave Studio Software. The performances of the antenna are evaluated in term of return loss, gain and efficiency. Results show that the rate attenuation for the propagation is approximately 0.16 dB up to 0.42 dB. All the results will be guidelines in designing implantable antennas in futures.

scholarly journals A lightweight verifiable outsourced decryption of attribute-based encryption scheme for blockchain-enabled wireless body area network in fog computing

2020 ◽  
Vol 16 (2) ◽  
pp. 155014772090679
Author(s):  
Rui Guo ◽  
Chaoyuan Zhuang ◽  
Huixian Shi ◽  
Yinghui Zhang ◽  
Dong Zheng
Keyword(s):  
Fog Computing ◽  
Wearable Sensors ◽  
Wireless Body Area Network ◽  
Physiological Data ◽  
Body Area Network ◽  
Area Network ◽  
Encryption Scheme ◽  
Body Area ◽  
Attribute Based Encryption ◽  
Outsourced Decryption

Wireless body area network includes some tiny wearable sensors for monitoring the physiological data of user, which has been a promising method of promoting the quality and efficiency greatly in healthcare. The collected physical signs are aggregated into the medical documents and uploaded to cloud server for utilizing by the remote user. As these files are highly sensitive privacy data, there is a vital challenge that constructs a secure and efficient communication architecture in this application scenario. Based on this standpoint, we present a lightweight verifiability ciphertext-policy attribute-based encryption protocol with outsourced decryption in this article. Specifically, our construction enjoys the following six features: (1) Although the outsourced decryption enables to save the computation overhead of the data user sharply in an attribute-based encryption scheme, the ciphertext is out of control and the correctness cannot be guaranteed by the data owner. The proposal provides the verifiability of ciphertext that ensures the user to check the correctness efficiently. (2) The size of the ciphertext is constant that is not increased with the complexity of attribute and access structure. (3) For Internet of Things devices, it introduces the fog computing into our protocol for the purpose of low latency and relation interactions, which has virtually saved the bandwidth. (4) With the help of blockchain technique, we encapsulate the hash value of public parameter, original and transformed ciphertext and transformed key into a block, so that the tamper-resistance is facilitated against an adversary from inside and outside the system. (5) In the standard model, we prove that it is selectively chosen-plaintext attack-secure and verifiable provided that the computational bilinear Diffie–Hellman assumption holds. (6) It implements this protocol and shows the result of performance measurement, which indicates a significant reduction on communication and computation costs burden on every entity in wireless body area network.

scholarly journals Real-time Health Monitoring System Using Wireless Body Area Network

2020 ◽  
pp. 26-30
Keyword(s):  
Monitoring System ◽  
Human Body ◽  
Research Work ◽  
Wireless Body Area Network ◽  
Medical Personnel ◽  
Physiological Data ◽  
Body Area Network ◽  
Area Network ◽  
Body Area ◽  
Healthcare Applications

Wireless body area network (WBAN) being a sub-domain of wireless sensor network (WSN) is a new emerging technology for healthcare applications. A WBAN consists of low-power tiny wireless nodes placed on or around the human body that continuously observe vital health signs of a patient. These sensors are capable of sending information of physiological parameters taken from human body to other devices for diagnosis procedures and prescription. WBAN provides ubiquitous healthcare services and enables greater mobility without restricting human normal activities, as the medical personnel can observe the patient health conditions based on the data received through the wireless network. This research work provides a WBAN based healthcare monitoring system that can provide the electrocardiogram (ECG), heartbeat, and human body temperature information. The wireless transmission of the received data from human body is performed by using Zigbee IEEE802.15.4 communication standard. The physiological data will be communicated to remote medical server where data is stored and analyzed. In case any disease is diagnosed, medical personnel can provide immediate assistance to the patients.

scholarly journals Adaptive Thermal-Aware Routing Protocol for Wireless Body Area Network

Electronics ◽  
2019 ◽  
Vol 8 (1) ◽  
pp. 47 ◽  
Author(s):  
Faisal Jamil ◽  
Muhammad Azhar Iqbal ◽  
Rashid Amin ◽  
DoHyeun Kim
Keyword(s):  
Temperature Rise ◽  
Routing Algorithm ◽  
Wireless Body Area Network ◽  
Sensor Nodes ◽  
Physiological Data ◽  
Body Area Network ◽  
Area Network ◽  
Body Area ◽  
Body Tissues ◽  
Increasing Temperature

The recent advancement in information technology and evolving of the (IoT) shifted the traditional medical approach to patient-oriented approach (e.g., Telemedicine/Telemonitoring). IoT permits several services including sensing, processing and communicating information with physical and bio-medical constraints. Wireless Body Area Network (WBAN) handles the issues pertaining to the medical purposes in the form of sensor nodes and connected network. The WBAN takes human physiological data as an input to subsequently monitor the patient conditions that are transferred to other IoT components for analysis. Such monitoring and analysis demand a cohesive routing approach to ensure the safe and in-time transfer of data. The temperature rise of bio-medical sensor nodes makes the entire routing operation very crucial because the temperature of implanted nodes rises and ultimately damages body tissues. This needs dispersion in data transmission among different nodes by opting various available routes while avoiding temperature rise. In this paper, we present Adaptive Thermal-Aware Routing algorithm for WBAN. The ATAR is designed to overcome the temperature rise issue of implanted bio-medical sensors nodes. The new protocol is based on Multi-Ring Routing approach to find an alternative route in the case of increasing temperature. The simulation results indicate that proposed protocol is more efficient in terms of temperature rise and throughput than existing approaches.

scholarly journals Securing Wireless Body Area Network with Efficient Secure Channel Free and Anonymous Certificateless Signcryption

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Fazal Noor ◽  
Turki A. Kordy ◽  
Ahmad B. Alkhodre ◽  
Oussama Benrhouma ◽  
Adnan Nadeem ◽  
...  
Keyword(s):  
Wireless Body Area Network ◽  
Security Requirements ◽  
Physiological Data ◽  
Body Area Network ◽  
Area Network ◽  
Body Area ◽  
Public Verifiability ◽  
Wireless Environment ◽  
Health Application ◽  
Secure Channel

In the last few years, the wireless body area network (WBAN) has emerged as an appealing and viable option in the e-health application domain. WBAN technology is primarily used to offer continuous screening of health data to patients, independent of their location, time, or activity. A WBAN, on the other hand, is vulnerable to different cyberattacks due to the openness of the wireless environment and the privacy of people’s physiological data. A highly efficient and secure cryptographic scheme that can fulfill the needs of resource-constrained WBAN sensors and devices is considered necessary. First, we take a look at the most up-to-date security solutions for WBANs. Then, we go through some of the underlying concerns and challenges with WBAN security. We propose a new framework called secure channel free certificateless signcryption scheme for WBANs based on a hyperelliptic curve that can meet security requirements such as confidentiality, anonymity, integrity, resistance against unauthorized users, unforgeability, public verifiability, forward secrecy, and antireplay attack, all of which can be achieved with low computation and communication costs. The computation cost of the proposed scheme is 3.36 ms, which is much better than its counterpart schemes.

Effect of mobility conditions on the throughput of the Wireless Body Area Network

2020 ◽  
Vol 10 ◽  
Author(s):  
Shilpa Shinde ◽  
Santosh Sonavane
Keyword(s):  
Mathematical Model ◽  
Wireless Body Area Network ◽  
Data Rate ◽  
Hand Movements ◽  
Body Area Network ◽  
Area Network ◽  
Mobility Patterns ◽  
Body Area ◽  
Insight Into ◽  
Leg Movements

Background and objective: In the Wireless Body Area Network (WBAN) sensors are placed on the human body; which has various mobility patterns like seating, walking, standing and running. This mobility typically assisted with hand and leg movements on which most of the sensors are mounted. Previous studies were largely focused on simulations of WBAN mobility without focusing much on hand and leg movements. Thus for realistic studies on performance of the WBAN, it is important to consider hand and leg movements. Thus, an objective of this paper is to investigate an effect of the mobility patterns with hand movements on the throughput of the WBAN. Method: The IEEE 802.15.6 requirements are considered for WBAN design. The WBAN with star topology is used to connect three sensors and a hub. Three types of mobility viz. standing, walking and running with backward and forward hand movements is designed for simulation purpose. The throughput analysis is carried out with the three sets of simulations with standing, walking and running conditions with the speed of 0 m/s, 0.5 m/s and 3 m/s respectively. The data rate was increased from 250 Kb to 10000 Kb with AODV protocol. It is intended to investigate the effect of the hand movements and the mobility conditions on the throughput. Simulation results are analyzed with the aid of descriptive statistics. A comparative analysis between the simulated model and a mathematical model is also introduced to get more insight into the data. Results: Simulation studies showed that as the data rate is increased, throughput is also increased for all mobility conditions however, this increasing trend was discontinuous. In the standing (static) position, the throughput is found to be higher than mobility (dynamic) condition. It is found that, the throughput is better in the running condition than the walking condition. Average values of the throughput in case of the standing condition were more than that of the dynamic conditions. To validate these results, a mathematical model is created. In the mathematical model, a same trend is observed. Conclusion: Overall, it is concluded that the throughput is decreased due to mobility of the WBAN. It is understood that mathematical models have given more insight into the simulation data and confirmed the negative effect of the mobility conditions on throughput. In the future, it is proposed to investigate effect of interference on the designed network and compare the results.

Sign in / Sign up

Export Citation Format

Share Document