scholarly journals Bandwidth and Gain Enhancement of Patch Antenna with Stacked Parasitic Strips Based on LTCC Technology

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Li Li ◽  
Yong Zhang ◽  
Jinhong Wang ◽  
Wei Zhao ◽  
Shuang Liu ◽  
...  
Keyword(s):  
Low Temperature ◽  
Patch Antenna ◽  
Impedance Bandwidth ◽  
Radiation Patterns ◽  
Antenna Radiation ◽  
Maximum Gain ◽  
Gain Enhancement ◽  
Resonant Modes ◽  
Operating Bandwidth

A compact patch antenna with stacked parasitic strips (SPSs) based on low temperature cofired ceramic (LTCC) technology is presented. By adding three pairs of SPSs above the traditional patch antenna, multiple resonant modes are excited to broaden the bandwidth. At the same time, the SPSs act as directors to guide the antenna radiation toward broadside direction to enhance the gain. The measured results show that the prototype antenna achieves an impedance bandwidth of 16% forS11<-10 dB (32.1–37.9 GHz) and a maximum gain of about 8 dBi at 35 GHz. Furthermore, the radiation patterns and gain are relatively stable within the operating bandwidth. The total volume of the antenna is only 8 × 8 × 1.1 mm3.

scholarly journals A Novel Design of Parasitically Gap Coupled Patches Forming an Elliptical Patch Antenna for Broadband Performance

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Vijay Sharma
Keyword(s):  
Patch Antenna ◽  
Single Layer ◽  
The Other ◽  
Impedance Bandwidth ◽  
Radiation Patterns ◽  
Central Frequency ◽  
Elliptical Shape ◽  
Resonant Modes ◽  
Novel Design ◽  
Layer Assembly

A novel single layer assembly of gap coupled elements in elliptical shape is proposed in this communication to achieve broadband performance. Among the five patches considered in the present assembly, two pairs of patches having different patch areas are arranged around an edge truncated elliptical patch. The central edge truncated elliptical patch is fed through an inset feed arrangement and the other patches are parasitically gap coupled to the central patch. With such an arrangement, an enhanced impedance bandwidth of 2.45 GHz (or 36.2%) with respect to central frequency 6.1 GHz is achieved. Three resonant modes are excited with this arrangement giving improved bandwidth and gain in comparison to a conventional elliptical patch antenna. The simulated radiation patterns of proposed arrangement of patches suggest that these are identical in shape and direction of maximum radiations is directed normally to assembly of patches.

A Broadband Circularly Polarized Cross-slotted Patch Antenna with Horizontal Meandered Strip (HMS)

Frequenz ◽  
2020 ◽  
Vol 74 (5-6) ◽  
pp. 191-199
Author(s):  
M. K. Verma ◽  
Binod K. Kanaujia ◽  
J. P. Saini ◽  
Padam S. Saini
Keyword(s):  
Circular Polarization ◽  
Patch Antenna ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Radiation Patterns ◽  
Circularly Polarized ◽  
Feeding Technique

AbstractA broadband circularly polarized slotted square patch antenna with horizontal meandered strip (HMS) is presented and studied. The HMS feeding technique provides the good impedance matching and broadside symmetrical radiation patterns. A set of cross asymmetrical slots are etched on the radiating patch to realize the circular polarization. An electrically small stub is added on the edge of the antenna for further improvement in performance. Measured 10-dB impedance bandwidth (IBW) and 3-dB axial ratio bandwidth (ARBW) of the proposed antenna are 32.31 % (3.14–4.35 GHz) and 20.91 % (3.34–4.12 GHz), respectively. The gain of the antenna is varied from 3.5 to 4.86dBi within 3-dB ARBW. Measured results matched well with the simulated results.

scholarly journals Gain Enhancement of a Microstrip Patch Antenna Using a Reflecting Layer

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Anwer Sabah Mekki ◽  
Mohd Nizar Hamidon ◽  
Alyani Ismail ◽  
Adam R. H. Alhawari
Keyword(s):  
Patch Antenna ◽  
Low Complexity ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Gain Enhancement ◽  
Microstrip Patch ◽  
Low Profile ◽  
Narrow Bandwidth ◽  
Military Systems ◽  
Small Antenna

A low profile, unidirectional, dual layer, and narrow bandwidth microstrip patch antenna is designed to resonate at 2.45 GHz. The proposed antenna is suitable for specific applications, such as security and military systems, which require a narrow bandwidth and a small antenna size. This work is mainly focused on increasing the gain as well as reducing the size of the unidirectional patch antenna. The proposed antenna is simulated and measured. According to the simulated and measured results, it is shown that the unidirectional antenna has a higher gain and a higher front to back ratio (F/B) than the bidirectional one. This is achieved by using a second flame retardant layer (FR-4), coated with an annealed copper of 0.035 mm at both sides, with an air gap of 0.04λ0as a reflector. A gain of 5.2 dB with directivity of 7.6 dBi, F/B of 9.5 dB, and −18 dB return losses (S11) are achieved through the use of a dual substrate layer of FR-4 with a relative permittivity of 4.3 and a thickness of 1.6 mm. The proposed dual layer microstrip patch antenna has an impedance bandwidth of 2% and the designed antenna shows very low complexity during fabrication.

scholarly journals Compact Shorted Stacked-Patch Antenna Integrated with Chip-Package Based on LTCC Technology

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Yongjiu Li ◽  
Long Li ◽  
Xiwang Dai ◽  
Cheng Zhu ◽  
Feifei Huo ◽  
...  
Keyword(s):  
Low Temperature ◽  
Patch Antenna ◽  
Ground Plane ◽  
Center Frequency ◽  
Design Parameters ◽  
Impedance Bandwidth ◽  
Resonant Frequencies ◽  
Low Profile ◽  
On Chip ◽  
Stacked Patch Antenna

A low profile chip-package stacked-patch antenna is proposed by using low temperature cofired ceramic (LTCC) technology. The proposed antenna employs a stacked-patch to achieve two operating frequency bands and enhance the bandwidth. The height of the antenna is decreased to 4.09 mm (aboutλ/25 at 2.45 GHz) due to the shorted pin. The package is mounted on a 44 × 44 mm2ground plane to miniaturize the volume of the system. The design parameters of the antenna and the effect of the antenna on chip-package cavity are carefully analyzed. The designed antenna operates at a center frequency of 2.45 GHz and its impedance bandwidth(S11< -10 dB)is 200 MHz, resulting from two neighboring resonant frequencies at 2.41 and 2.51 GHz, respectively. The average gain across the frequency band is about 5.28 dBi.

Bandwidth enhancement of compact patch antennas by loading inverted “L” and “T” strips

2020 ◽  
pp. 1-8
Author(s):  
Abdelheq Boukarkar ◽  
Rachdi Satouh
Keyword(s):  
Patch Antenna ◽  
Resonant Mode ◽  
Patch Antennas ◽  
Bandwidth Enhancement ◽  
Wireless Applications ◽  
Low Profile ◽  
Resonant Modes ◽  
Relative Bandwidth ◽  
Operating Bandwidth ◽  
Patch Edge

Abstract We propose simple designs of compact patch antennas with bandwidth enhancement. Firstly, an inverted “L” strip is loaded onto the corner of one radiating patch edge to create an additional resonant mode which can be combined with that one of the conventional patch to enhance the operating bandwidth. Secondly, the “L” strip is replaced by inverted “T” strip to improve further the bandwidth by creating two adjustable resonant modes. The two proposed patch antennas have the particularity of enhancing the bandwidth significantly without increasing their profile and their overall sizes. Two antenna prototypes are fabricated and tested. Measurements reveal that the patch antenna loaded with “L” strip has stable radiation characteristics with 5.2 times enhancement in the relative bandwidth compared with a conventional patch antenna. The antenna loaded with inverted “T” strip has wider bandwidth (6.25 times wider than the conventional patch) and covers the operating band 5.07–5.89 GHz (15%) with measured peak gain and peak efficiency of 6.25 dBi and 78%, respectively. The proposed antennas are easy to fabricate, have a low-profile, and exhibit good performances which make them good candidates to use in real wireless applications.

Gain enhancement over a wideband in CPW-fed compact circular patch antenna

2013 ◽  
Vol 6 (5) ◽  
pp. 497-503 ◽  
Author(s):  
Kirti Vyas ◽  
Garima Sanyal ◽  
Arun Kumar Sharma ◽  
Pramod Kumar Singhal
Keyword(s):  
Patch Antenna ◽  
Coplanar Waveguide ◽  
Impedance Bandwidth ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Radiation Characteristics ◽  
Circular Patch ◽  
Gain Enhancement ◽  
X Band ◽  
Circular Patch Antenna

The present paper reports the gain enhancement over a wideband (12–15 GHz) in a coplanar waveguide (CPW)-fed circular patch antenna with circular defected ground structure (DGS). Two compact coplanar circular antennas have been designed and fabricated with and without DGS of same volume 18 × 20 × 1.6 mm3, built over FR4-epoxy substrate (εr = 4.4). Gain enhancement has been achieved by optimizing the current distribution with suitable DGS. For this purpose, structural designs have been optimized by parametric simulations in HFSS and CST MWS. Both the antennas can perform well in variety of wireless communication including WLAN IEEE 802.11 g/a (5.15–5.35 GHz and 5.725–5.825 GHz) and X-band applications including short range, tracking, missile guidance, and radar communication that ranges roughly from 8.29 to 11.4 GHz. The measured experimental results show that impedance bandwidth (S11 < −10 dB) of antenna with DGS is 100%. The antenna with DGS offers gain improvement by 2.7 dB for 13 GHz and 7 dB for 14 GHz. The performance of antenna with DGS is compared to conventional CPW-fed circular patch antenna (without DGS) in terms of reflection coefficient, radiation characteristics, and gain.

Quarter cylindrical dielectric resonator antenna in multi-element composite form for wideband applications

2016 ◽  
Vol 9 (3) ◽  
pp. 639-647
Author(s):  
Pinku Ranjan ◽  
Ravi Kumar Gangwar
Keyword(s):  
Experimental Investigation ◽  
High Frequency ◽  
Dielectric Resonator ◽  
Simulation Software ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Radiation Patterns ◽  
High Frequency Structure Simulator ◽  
Composite Form ◽  
Operating Bandwidth

A novel quarter cylindrical dielectric resonator antenna (q-CDRA) has been introduced by splitting four uniform quarters from a cylinder. q-CDRA has been designed and validated with theoretical analysis. Two and four element q-CDRAs have been proposed in composite forms through Ansoft high-frequency structure simulator simulation software and fabricated for experimental investigation. The input characteristics and radiation patterns of the proposed antennas have been studied through simulation and compared with the measured ones. The |S11| characteristics of the proposed antennas have been compared with each other. The four-element composite q-CDRA has wide impedance bandwidth (|S11| ≤ −10 dB) of 58.15% with monopole-like radiation pattern as compared with other q-CDRAs. The two and four elements q-CDRAs have symmetric monopole-like radiation patterns with linear polarization for whole operating bandwidth (4.5–8.6 GHz). The proposed composite q-CDRAs may find suitable applications in WLAN and WiMAX band.

scholarly journals A Wideband Differential-Fed Microstrip Patch Antenna Based on Radiation of Three Resonant Modes

2019 ◽  
Vol 2019 ◽  
pp. 1-7 ◽  
Author(s):  
Taohua Chen ◽  
Yueyun Chen ◽  
Rongling Jian
Keyword(s):  
Patch Antenna ◽  
Free Space ◽  
Impedance Matching ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Current Position ◽  
Microstrip Patch ◽  
Zero Current ◽  
Resonant Modes ◽  
Rectangular Strips

A wideband differential-fed microstrip patch antenna based on radiation of three resonant modes of TM12, TM30, and slot is proposed in this paper. Firstly, two symmetrical rectangular slots are cut on the radiating patch where the zero-current position of the TM30 mode excites another resonant slot mode. In addition, the slot’s length is enlarged to decrease the frequency of the slot mode with little effect on that of the TM30 mode. To further expand the impedance bandwidth, the width of patch is reduced to increase the frequency of the TM12 mode, while having little influence on that of the TM30 and slot modes. Moreover, a pair of small rectangular strips is adopted on the top of the feeding probes to achieve a good impedance matching. Finally, based on the arrangements above, a broadband microstrip patch antenna with three in-band minima is realized. The results show that the impedance bandwidth (Sdd11<−10 dB) of the proposed antenna is extended to 35.8% at the profile of 0.067 free-space wavelength. Meanwhile, the proposed antenna maintains a stable radiation pattern in the operating band.

Sign in / Sign up

Export Citation Format

Share Document