scholarly journals Compact Shorted Stacked-Patch Antenna Integrated with Chip-Package Based on LTCC Technology

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Yongjiu Li ◽  
Long Li ◽  
Xiwang Dai ◽  
Cheng Zhu ◽  
Feifei Huo ◽  
...  
Keyword(s):  
Low Temperature ◽  
Patch Antenna ◽  
Ground Plane ◽  
Center Frequency ◽  
Design Parameters ◽  
Impedance Bandwidth ◽  
Resonant Frequencies ◽  
Low Profile ◽  
On Chip ◽  
Stacked Patch Antenna

A low profile chip-package stacked-patch antenna is proposed by using low temperature cofired ceramic (LTCC) technology. The proposed antenna employs a stacked-patch to achieve two operating frequency bands and enhance the bandwidth. The height of the antenna is decreased to 4.09 mm (aboutλ/25 at 2.45 GHz) due to the shorted pin. The package is mounted on a 44 × 44 mm2ground plane to miniaturize the volume of the system. The design parameters of the antenna and the effect of the antenna on chip-package cavity are carefully analyzed. The designed antenna operates at a center frequency of 2.45 GHz and its impedance bandwidth(S11< -10 dB)is 200 MHz, resulting from two neighboring resonant frequencies at 2.41 and 2.51 GHz, respectively. The average gain across the frequency band is about 5.28 dBi.

scholarly journals Trapezoid Shape Patch Antenna for WLAN Application

2019 ◽  
Vol 8 (9S) ◽  
pp. 512-516
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Design Parameters ◽  
Impedance Bandwidth ◽  
Area Network ◽  
S Parameter

In this paper,CPW fed Trapezoid shape patch antenna is analyzed and investigated for Wireless Local Area Network (WLAN) application. The proposed antenna is fabricated on FR4 substrate having dimensions of 19mm ×21.2mm ×1.6mm. It resonates at 5.44 GHz frequency with peak return loss of 25.8 dB. The parametric study of proposed antenna is carried out to understand the effect of different values of ground plane on the impedance bandwidth, return loss of the antenna andalso to optimize the antenna parameters. The CPW-fed is used to enhance the bandwidth and to reduce the return loss of the antenna. The importance of different design parameters like current distribution, S-parameter, gain, and radiation pattern are studied. The results of the proposed antenna are useful for WLAN Application.

scholarly journals Beamwidth-Enhanced Low-Profile Dual-Band Circular Polarized Patch Antenna for CNSS Applications

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Hongmei Liu ◽  
Chenhui Xun ◽  
Shaojun Fang ◽  
Zhongbao Wang
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Axial Ratio ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Coupled Line ◽  
Low Profile ◽  
Feed Network ◽  
Single Input ◽  
Half Power

A low-profile dual-band circular polarized (CP) patch antenna with wide half-power beamwidths (HPBWs) is presented for CNSS applications. Simple stacked circular patches are used to achieve dual-band radiation. To enhance the HPBW for the two operation bands, a dual annular parasitic metal strip (D-APMS) combined with reduced ground plane (R-GP) is presented. A single-input feed network based on the coupled line transdirectional (CL-TRD) coupler is also proposed to provide two orthogonal modes at the two frequency bands simultaneously. Experimental results show that the 10 dB impedance bandwidth is 32.7%. The 3 dB axial ratio (AR) bandwidths for the lower and upper bands are 4.1% and 6.5%, respectively. At 1.207 GHz, the antenna has the HPBW of 123° and 103° in the xoz and yoz planes, separately. And the values are 127° and 113° at 1.561 GHz.

scholarly journals A Low-Profile Circularly Polarized Conical-Beam Antenna with Wide Overlap Bandwidth

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Wei He ◽  
Yejun He ◽  
Long Zhang ◽  
Sai-Wai Wong ◽  
Wenting Li ◽  
...  
Keyword(s):  
Electric Field ◽  
Patch Antenna ◽  
Ground Plane ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Beam Radiation ◽  
Circularly Polarized ◽  
Low Profile ◽  
Two Sides ◽  
Conical Beam

In this paper, a low-profile circularly polarized (CP) conical-beam antenna with a wide overlap bandwidth is presented. Such an antenna is constructed on the two sides of a square substrate. The antenna consists of a wideband monopolar patch antenna fed by a probe in the center and two sets of arc-hook-shaped branches. The monopolar patch antenna is loaded by a set of conductive shorting vias to achieve a wideband vertically polarized electric field. Two sets of arc-hook-shaped parasitic branches connected to the patch and ground plane can generate a horizontally polarized electric field. To further increase the bandwidth of the horizontally polarized electric field, two types of arc-hook-shaped branches with different sizes are used, which can generate another resonant frequency. When the parameters of the arc-hook-shaped branches are reasonably adjusted, a 90° phase difference can be generated between the vertically polarized electric field and the horizontally polarized electric field, so that the antenna can produce a wideband CP radiation pattern with a conical beam. The proposed antenna has a wide impedance bandwidth ( ∣ S 11 ∣ < − 10   dB ) of 35.6% (4.97-7.14 GHz) and a 3 dB axial ratio (AR) bandwidth at phi = 0 ° and theta = 35 ° of about 30.1% (4.97-6.73 GHz). Compared with the earlier reported conical-beam CP antennas, an important feature of the proposed antenna is that the AR bandwidth is completely included in the impedance bandwidth, that is, the overlap bandwidth of ∣ S 11 ∣ < − 10   dB and AR < 3   dB is 30.1%. Moreover, the stable omnidirectional conical-beam radiation patterns can be maintained within the whole operational bandwidth.

scholarly journals Mesh-Grounded Monopolar Hexagonal Microstrip Antenna for Artillery-Launched Observation Round

Electronics ◽  
2019 ◽  
Vol 8 (11) ◽  
pp. 1279
Author(s):  
Lee ◽  
Kim ◽  
Pyo
Keyword(s):  
Microstrip Antenna ◽  
Ground Plane ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Ground Structure ◽  
Periodic Arrays ◽  
Mesh Width ◽  
Low Profile ◽  
Slot Arrays ◽  
Metal Wires

This paper presents a novel low-profile microstrip antenna with an omnidirectional radiation pattern for an artillery-launched observation round. The proposed antenna consists of one centered hexagonal patch for a feeding network and six periodic arrays of a trapezoid patch for a radiator. The trapezoid patch is equal to a half-sized hexagonal patch based on geometrical symmetry. A gap-coupled one-hexagonal patch and six trapezoid patches are supported on a nonfundamental TM02 mode for vertically polarized omnidirectional radiation patterns. In addition, a meshed ground structure for the proposed antenna is employed to improve the impedance bandwidth. The thin metal wires that are formed by the meshed ground structure yield six trapezoid slot arrays for the feeding network and three triangular slot arrays for the radiator on the ground plane. To verify the feasibility of the meshed ground structure, the mesh width, denoted by w, was investigated theoretically and optimized carefully to enlarge the impedance bandwidth of the proposed antenna. Finally, the proposed antenna, with a mesh width of 0.2 mm, successfully demonstrated excellent monopolar radiation at a resonant frequency of 5.84 GHz, a realized gain of 5.27 dBi, and an impedance bandwidth of 452 MHz from 5.583 GHz to 6.035 GHz with respect to 7.78% at a center frequency of 5.809 GHz.

scholarly journals Design Studies of Ultra-Wideband Microstrip Antennas with a Small Capacitive Feed

2007 ◽  
Vol 2007 ◽  
pp. 1-8 ◽  
Author(s):  
Veeresh G. Kasabegoudar ◽  
Dibyant S. Upadhyay ◽  
K. J. Vinoy
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Microstrip Antennas ◽  
Design Criterion ◽  
Air Gap ◽  
Ultra Wideband ◽  
Design Parameters ◽  
Impedance Bandwidth ◽  
Rectangular Patch ◽  
Almost All

The design of an ultra-wideband microstrip patch antenna with a small coplanar capacitive feed strip is presented. The proposed rectangular patch antenna provides an impedance bandwidth of nearly 50%, and has stable radiation patterns for almost all frequencies in the operational band. Results presented here show that such wide bandwidths are also possible for triangular and semiellipse geometries with a similar feed arrangement. The proposed feed is a very small strip placed very close to the radiator on a substrate above the ground plane. Shape of the feed strip can also be different, so long as the area is not changed. Experimental results agree with the simulated results. Effects of key design parameters such as the air gap between the substrate and the ground plane, the distance between radiator patch and feed strip, and the dimensions of the feed strip on the input characteristics of the antenna have been investigated and discussed. As demonstrated here, the proposed antenna can be redesigned for any frequency in the L-, S-, C-, or X-band. A design criterion for the air gap has been empirically obtained to enable maximum antenna bandwidth for all these operational frequencies.

scholarly journals DGS based monopole circular-shaped patch antenna for UWB applications

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Dattatreya Gopi ◽  
Appala Raju Vadaboyina ◽  
J. R. K. Kumar Dabbakuti
Keyword(s):  
Patch Antenna ◽  
Substrate Material ◽  
Impedance Bandwidth ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Compact Structure ◽  
Resonant Frequencies ◽  
Low Profile ◽  
Uwb Applications ◽  
Good Agreement

AbstractA simple low profile defected ground structure based monopole circular-shaped patch antenna is proposing for ultrawide-band applications. The design allows for a simple and compact structure on the FR-4 substrate material. The proposed design initially has a meager antenna gain and bandwidth. To increase the antenna bandwidth and gain, the defective ground structure is implemented with four dumble-shaped slots. Parametric analysis is considered to find the radius of circular patch for tuning of UWB frequency applications. The proposed MCP antenna resonates at 2.9 GHz, 9.1 GHz frequencies with a S11 of − 34.84 dB, − 33.74 dB, respectively, and achieves 8.1 GHz (2.5–10.6 GHz) impedance bandwidth concerning the − 10 dB reference line of the reflection coefficient. The gains are 8.4 dBi, 8.2 dBi for the two resonant frequencies, and the radiation patterns are semi-omnidirectional, omnidirectional. The proposed antenna has-been validated by observing good agreement between the simulation and the measured results.

Annular ring microstrip patch antenna with finite ground plane for ultra-wideband applications

2014 ◽  
Vol 7 (2) ◽  
pp. 179-184 ◽  
Author(s):  
Sanyog Rawat ◽  
Kamalesh Kumar Sharma
Keyword(s):  
Microstrip Antenna ◽  
Simple Structure ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Ground Structure ◽  
Resonant Frequencies ◽  
Annular Ring ◽  
Low Profile ◽  
Key Factor

A design of annular ring microstrip antenna with finite ground structure is proposed in this paper. The proposed geometry offers impedance bandwidth of 2.362 GHz and has stable radiation patterns for all resonant frequencies in the operational band. It is also found that shape and dimension of the finite ground plane is a key factor in improving the bandwidth of the proposed geometry. The geometry is low profile and has simple structure, therefore can be used for lower band of ultra-wideband applications.

scholarly journals ANALYSIS OF A MODIFIED GROUND PLANE MICROSTRIP PATCH ANTENNA USING CO-AXIAL FEED

2020 ◽  
Vol 5 (2) ◽  
pp. 194-200
Author(s):  
Rahul Tiwari ◽  
Dr. Ashish Bagwari ◽  
Dr. Vivek Singh Kushwah ◽  
Abhishek Senger
Keyword(s):  
Patch Antenna ◽  
Dielectric Material ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Resonant Frequencies ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna

A wandered probe-fed rectangular microstrip patch antenna (RMPA) with rectangular slots on a finite ground plane with dielectric material substrate (4.4) is proposed in this paper. The proposed antenna finite ground plane dimension is only 18mm x 21mm. The simulated result shows two distinct resonant frequencies at 4.5 and 9.5 GHz. A 10-dB wide-impedance bandwidth of 1000 MHz and 4100 MHz ranging from 3.8-4.8 GHz and 5.9–10 GHz is achieved. The proposed antennas have achieved wider bandwidth (51.3%) with reasonable gain (4 dBi).

Low-profile, extremely wideband, dual-band-notched MIMO antenna for UWB applications

2019 ◽  
Vol 11 (7) ◽  
pp. 719-728 ◽  
Author(s):  
Ankan Bhattacharya ◽  
Bappadittya Roy ◽  
Rafael F. S. Caldeirinha ◽  
Anup K. Bhattacharjee
Keyword(s):  
Coupling Effect ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Split Ring Resonator ◽  
Fine Tuning ◽  
Dual Band ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Low Profile

AbstractIn this article, an extremely wideband, isolation-enhanced, low-profile “Multiple-Input-Multiple-Output” (MIMO) antenna along with dual-band-notched features has been investigated. The antenna proposed herein, possesses two mutually orthogonal staircase-etched radiators for achieving a wide bandwidth. The radiating elements are placed mutually perpendicular in order to achieve polarization diversity and high isolation, i.e. for minimization of mutual coupling effect between adjacent radiating elements. The antenna exhibits an extremely wide frequency bandwidth covering 1.2–19.4 GHz except two frequency band notches centered at 3.5 and 5.5 GHz, respectively, originated due to the incorporation of a “Rectangular Complementary Split Ring Resonator (RCSRR)” structure and by etching dual “L-shaped” slits in the ground plane. The center frequency of the notched bands is adjusted by fine tuning of the dimensions of the incorporated band-notching structures. Isolation level (S21) better than −20 dB has been obtained due to the insertion of a “T-shaped” parasitic element as a decoupling structure. A prototype of the proposed antenna having dimension of 20 mm × 20 mm (0.08 λo × 0.08 λo) is fabricated and the antenna responses have been measured. Obtained results show that the miniaturized MIMO diversity antenna is undoubtedly a capable contender for communications supporting an extremely wide impedance bandwidth along with band-notched features for WLAN and WiMAX.

Single-Fed Low Profile Broadband Circularly Polarized Stacked Patch Antenna

2014 ◽  
Vol 62 (10) ◽  
pp. 5406-5410 ◽  
Author(s):  
Wenwen Yang ◽  
Jianyi Zhou ◽  
Zhiqiang Yu ◽  
Linsheng Li
Keyword(s):  
Patch Antenna ◽  
Circularly Polarized ◽  
Low Profile ◽  
Stacked Patch Antenna
Sign in / Sign up

Export Citation Format

Share Document