scholarly journals Guidance and Control of Position and Attitude for Rendezvous and Dock/Berthing with a Noncooperative/Target Spacecraft

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Gilberto Arantes ◽  
Luiz S. Martins-Filho
Keyword(s):  
Linear Quadratic Regulator ◽  
Linear Quadratic ◽  
Proximity Operations ◽  
Guidance And Control ◽  
Navigation And Control ◽  
Out Of Plane ◽  
Tracking Ability ◽  
And Control ◽  
Rendezvous And Docking ◽  
Target Spacecraft

Noncooperative target spacecrafts are those assets in orbit that cannot convey any information about their states (position, attitude, and velocities) or facilitate rendezvous and docking/berthing (RVD/B) process. Designing a guidance, navigation, and control (GNC) module for the chaser in a RVD/B mission with noncooperative target should be inevitably solved for on-orbit servicing technologies. The proximity operations and the guidance for achieving rendezvous problems are addressed in this paper. The out-of-plane maneuvers of proximity operations are explored with distinct subphases, including a chaser far approach in the target’s orbit to the first hold point and a closer approach to the final berthing location. Accordingly, guidance solutions are chosen for each subphase from the standard Hill based Closhessy-Willtshire (CW) solution, elliptical fly-around, and Glideslope algorithms. The control is based on a linear quadratic regulator approach (LQR). At the final berthing location, attitude tracker based on a proportional derivative (PD) form is tested to synchronize the chaser and target attitudes. The paper analyzes the performance of both controllers in terms of the tracking ability and the robustness. Finally, it prescribes any restrictions that may be imposed on the guidance during any subphase which can help to improve the controllers tracking ability.

scholarly journals A Novel Concept for Guidance and Control of Spacecraft Orbital Maneuvers

2016 ◽  
Vol 2016 ◽  
pp. 1-14 ◽  
Author(s):  
Matteo Dentis ◽  
Elisa Capello ◽  
Giorgio Guglieri
Keyword(s):  
Attitude Control ◽  
Linear Quadratic Regulator ◽  
Control Algorithms ◽  
Linear Quadratic ◽  
C Language ◽  
Orbital Maneuvers ◽  
Guidance And Control ◽  
Actuation System ◽  
Novel Concept ◽  
And Control

The purpose of this paper is the design of guidance and control algorithms for orbital space maneuvers. A 6-dof orbital simulator, based on Clohessy-Wiltshire-Hill equations, is developed in C language, considering cold gas reaction thrusters and reaction wheels as actuation system. The computational limitations of on-board computers are also included. A combination of guidance and control algorithms for an orbital maneuver is proposed: (i) a suitably designed Zero-Effort-Miss/Zero-Effort-Velocity (ZEM/ZEV) algorithm is adopted for the guidance and (ii) a linear quadratic regulator (LQR) is used for the attitude control. The proposed approach is verified for different cases, including external environment disturbances and errors on the actuation system.

Guidance, navigation and control for autonomous R-bar proximity operations for geostationary satellites

2016 ◽  
Vol 231 (3) ◽  
pp. 452-473 ◽  
Author(s):  
Changxuan Wen ◽  
Pini Gurfil
Keyword(s):  
Attitude Control ◽  
Sliding Mode ◽  
Vertical Axis ◽  
Mission Design ◽  
Line Of Sight ◽  
Proximity Operations ◽  
Geostationary Satellites ◽  
Navigation And Control ◽  
And Control ◽  
Rendezvous And Docking

R-bar refers to the local vertical axis pointing radially upward in a satellite-fixed reference frame. Approaching a satellite along the R-bar, especially for rendezvous and docking to geostationary satellites, is advantageous in terms of safety considerations and flight time compared to other options. In this paper, a specialized study on autonomous R-bar proximity operations with respect to a geostationary target from a separation of several kilometers to a few hundreds of meters, commonly referred to as the closing phase, is carried out and a comprehensive solution for both attitude and orbit control in this scenario is proposed. An integrative design of the guidance, navigation, and control for R-bar proximity operations is presented. Impulsive R-bar hopping maneuvers are developed for the trajectory guidance. This method is shown to be passively safe and time efficient. The onboard sensors provide measurements of the line-of-sight, range to the target, attitude and angular velocity in the inertial frame. Due to the sensitivity of the sensor’s pointing in the far-range phase, a sliding mode attitude control law is introduced to align the optical axis with the line-of-sight to the target. Sensor measurements are fused and processed by an extended Kalman filter. Simulation results indicate that the proposed integrative guidance, navigation, and control algorithms are robust to uncertainties and noise, and can be used as a comprehensive solution for R-bar rendezvous and docking mission design during the closing phase.

scholarly journals Mathematical Modelling and Control of a Two-Wheeled PUMA-LikeVehicle

2016 ◽  
Vol 6 (2) ◽  
pp. 11 ◽  
Author(s):  
Khaled M Goher
Keyword(s):  
Mathematical Modelling ◽  
Sliding Mode ◽  
Impact Load ◽  
State Space Model ◽  
Linear Quadratic Regulator ◽  
The Body ◽  
Pole Placement ◽  
General Motors ◽  
Linear Quadratic ◽  
And Control

<p class="1Body">This paper presents mathematical modelling and control of a two-wheeled single-seat vehicle. The design of the vehicle is inspired by the Personal Urban Mobility and Accessibility (PUMA) vehicle developed by General Motors® in collaboration with Segway®. The body of the vehicle is designed to have two main parts. The vehicle is activated using three motors; a linear motor to activate the upper part in a sliding mode and two DC motors activating the vehicle while moving forward/backward and/or manoeuvring. Two stages proportional-integral-derivative (PID) control schemes are designed and implemented on the system models. The state space model of the vehicle is derived from the linearized equations. Controller based on the Linear Quadratic Regulator (LQR) and the pole placement techniques are developed and implemented. Further investigation of the robustness of the developed LQR and the pole placement techniques is emphasized through various experiments using an applied impact load on the vehicle.</p>

Modeling and Control of a Complex Interacting Process

2011 ◽  
Vol 403-408 ◽  
pp. 3758-3762
Author(s):  
Subhajit Patra ◽  
Prabirkumar Saha
Keyword(s):  
Storage System ◽  
Linear Quadratic Regulator ◽  
Model Parameters ◽  
Linear Quadratic ◽  
Modeling And Control ◽  
Dynamic Matrix ◽  
Liquid Storage ◽  
Efficient Control ◽  
And Control

In this paper, two efficient control algorithms are discussed viz., Linear Quadratic Regulator (LQR) and Dynamic Matrix Controller (DMC) and their applicability has been demonstrated through case study with a complex interacting process viz., a laboratory based four tank liquid storage system. The process has Two Input Two Output (TITO) structure and is available for experimental study. A mathematical model of the process has been developed using first principles. Model parameters have been estimated through the experimentation results. The performance of the controllers (LQR and DMC) has been compared to that of industrially more accepted PID controller.

Acoustic Control Modeling of Conical Bores With Actuating Boundary Conditions

2001 ◽  
Author(s):  
Kevin M. Farinholt ◽  
Donald J. Leo
Keyword(s):  
Boundary Conditions ◽  
Driving Forces ◽  
State Space Model ◽  
Linear Quadratic Regulator ◽  
Mode Shapes ◽  
Linear Quadratic ◽  
Acoustic Control ◽  
Average Control ◽  
The One ◽  
And Control

Abstract An investigation of the natural frequencies and mode shapes associated with sealed conical bores having actuating boundary conditions is presented. Beginning with the one dimensional wave equation for spherically expanding waves, modal characteristics are developed as functions of cone geometry and actuator parameters. This paper presents both analytical and experimental comparisons for the purpose of validating model and development techniques. An investigation of the orthogonality and adjointness of the solution is presented. A discussion of incorporating driving forces in the system model for the purpose of coupling control actuators with internal acoustics is also included. Including these driving forces, a state space model of the system is developed for the purpose of applying modern feedback control. This paper concludes with a study on applying Linear Quadratic Regulator techniques to this system, relating tradeoffs between spatially averaged pressure and control voltages. The results of our simulations indicate that pressure reductions of 30% are attainable with average control voltages of 14.4 volts, given an example geometry.

scholarly journals TED Project: Conjugating Technology Development and Educational Activities

Aerospace ◽  
2019 ◽  
Vol 6 (6) ◽  
pp. 73 ◽  
Author(s):  
Lorenzo Olivieri ◽  
Francesco Sansone ◽  
Matteo Duzzi ◽  
Alessandro Francesconi
Keyword(s):  
Educational Outcomes ◽  
Technology Development ◽  
Scientific Publication ◽  
Educational Programs ◽  
Proximity Operations ◽  
Parabolic Flights ◽  
Electromagnetic Interactions ◽  
The University ◽  
And Control ◽  
Rendezvous And Docking

TED (Tethered Electromagnetic Docking) is a system proposed by a group of researchers and students of the University of Padova for close rendezvous and docking between spacecraft. It consists in a small tethered probe ejected by the chaser, reaching the proximity of the target with a controlled deployment, and then magnetically guided by a receiving electromagnet mounted on it. Because of the generated magnetic field, alignment and mating are possible; then, as the tether is rewound, the chaser is able to dock with the target. To perform a preliminary verification of TED, three groups of students have been involved in the project and contributed to the evaluation of its critical technologies in reduced gravity: in the framework of ESA “Drop your Thesis!” 2014 and 2016 campaigns the experiments FELDs and STAR focused on the test of the tether deployment and control, while PACMAN, in the framework of ESA “Fly Your Thesis! 2017” parabolic flights campaign, tested proximity operations by means of electromagnetic interactions. In this paper, a description of TED concept and its development roadmap is presented, introducing the critical technologies tested by FELDs, STAR, and PACMAN experiments. The second part of the paper focuses on the educational outcomes of the three experiments, introducing statistics on (1) student participation, (2) scientific publication production, and (3) influence of the educational programs on the students’ career.

scholarly journals System design for inverted pendulum using LQR control via IoT

2020 ◽  
Vol 11 ◽  
pp. 12
Author(s):  
Dechrit Maneetham ◽  
Petrus Sutyasadi
Keyword(s):  
Inverted Pendulum ◽  
Control Method ◽  
Linear Quadratic Regulator ◽  
Linear Quadratic ◽  
Lqr Control ◽  
Lqr Controller ◽  
Model Tuning ◽  
And Performance ◽  
Performance Results ◽  
And Control

This research proposes control method to balance and stabilize an inverted pendulum. A robust control was analyzed and adjusted to the model output with real time feedback. The feedback was obtained using state space equation of the feedback controller. A linear quadratic regulator (LQR) model tuning and control was applied to the inverted pendulum using internet of things (IoT). The system's conditions and performance could be monitored and controlled via personal computer (PC) and mobile phone. Finally, the inverted pendulum was able to be controlled using the LQR controller and the IoT communication developed will monitor to check the all conditions and performance results as well as help the inverted pendulum improved various operations of IoT control is discussed.

Augmented-Stability Controller Design for a UAV’s Longitudinal Motion

2011 ◽  
Vol 63-64 ◽  
pp. 533-536
Author(s):  
Xiao Jun Xing ◽  
Jian Guo Yan
Keyword(s):  
Dynamic Characteristics ◽  
Controller Design ◽  
Damping Ratio ◽  
Linear Quadratic Regulator ◽  
Longitudinal Motion ◽  
Linear Quadratic ◽  
Short Period ◽  
Quality Specifications ◽  
Simulation Results ◽  
And Control

With the purpose of overcoming the defect that unmanned air vehicles (UAVs) are easily disturbed by air current and tend to be unstable, an augmented-stability controller was developed for a certain UAV’s longitudinal motion. According to requirements of short-period damping ratio and control anticipation parameter (CAP) in flight quality specifications of GJB185-86 and C*, linear quadratic regulator (LQR) theory was used in the augmented-stability controller’s design. The simulation results show that the augmented-stability controller not only improves the UAV’s stability and dynamic characteristics but also enhances the UAV’s robustness.

scholarly journals The Coupled Orbit-Attitude Dynamics and Control of Electric Sail in Displaced Solar Orbits

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Mingying Huo ◽  
He Liao ◽  
Yanfang Liu ◽  
Naiming Qi
Keyword(s):  
Linear Quadratic Regulator ◽  
Coupled System ◽  
Control Force ◽  
Attitude Dynamics ◽  
Voltage Distribution ◽  
Linear Quadratic ◽  
Displaced Orbit ◽  
Dynamics And Control ◽  
And Control ◽  
Small Torque

Displaced solar orbits for spacecraft propelled by electric sails are investigated. Since the propulsive thrust is induced by the sail attitude, the orbital and attitude dynamics of electric-sail-based spacecraft are coupled and required to be investigated together. However, the coupled dynamics and control of electric sails have not been discussed in most published literatures. In this paper, the equilibrium point of the coupled dynamical system in displaced orbit is obtained, and its stability is analyzed through a linearization. The results of stability analysis show that only some of the orbits are marginally stable. For unstable displaced orbits, linear quadratic regulator is employed to control the coupled attitude-orbit system. Numerical simulations show that the proposed strategy can control the coupled system and a small torque can stabilize both the attitude and orbit. In order to generate the control force and torque, the voltage distribution problem is studied in an optimal framework. The numerical results show that the control force and torque of electric sail can be realized by adjusting the voltage distribution of charged tethers.

Sign in / Sign up

Export Citation Format

Share Document