scholarly journals The High-Speed Train Seat Design Based on the Human Lumbar Biomechanical Analysis

2014 ◽  
Vol 6 ◽  
pp. 524802
Author(s):  
Yunpeng Guo ◽  
Guiqiu Song
Keyword(s):  
High Speed ◽  
Element Model ◽  
Least Square ◽  
Biomechanical Analysis ◽  
High Speed Train ◽  
Design Standards ◽  
Engineering Technology ◽  
Moving Least Square ◽  
Physical Ergonomics ◽  
The Finite Element Model

This paper, aimed at the problems of high-speed train seat design standards that lack biomechanical analysis, analyzed the lumbar force of sitting position and verified the validity of the finite element model of human lumbar L1–L5 that had been built by reverse engineering technology. Based on the lumbar force distribution, the methods of exterior penalty and moving least square were adopted to establish a high-speed train seat equation that caters for physical ergonomics and a new high-speed train seat model was designed so as to improve the comfort for passengers.

Durability Analysis of the Reduction Gear for High Speed Train Considering Driving Histories

2012 ◽  
Vol 586 ◽  
pp. 269-273
Author(s):  
Chul Su Kim ◽  
Gil Hyun Kang
Keyword(s):  
Fatigue Life ◽  
High Speed ◽  
Element Model ◽  
Rolling Stock ◽  
Reduction Gear ◽  
High Speed Train ◽  
Analysis Software ◽  
Tractive Effort ◽  
Durability Analysis ◽  
The Finite Element Model

To assure the safety of the power bogies for train, it is important to perform the durability analysis of reduction gear considering a variation of velocity and traction motor capability. In this study, two types of applied load histories were constructed from driving histories considering the tractive effort and the train running curves by using dynamic analysis software (MSC.ADAMS). Moreover, this study was performed by evaluating fatigue damage of the reduction gears for rolling stock using durability analysis software (MSC.FATIGUE). The finite element model for evaluating the carburizing effect on the gear surface was used for predicting the fatigue life of the gears. The results showed that the fatigue life of the reduction gear would decrease with an increasing numbers of stops at station.

Research on the Effects of Welding Sequence on Welding Residual Stress of High-Speed Train Based on SYSWELD

2011 ◽  
Vol 399-401 ◽  
pp. 1806-1811
Author(s):  
Yong Hong Chen ◽  
Peng Chen ◽  
Ai Qin Tian
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
High Speed ◽  
Element Model ◽  
Welding Residual Stress ◽  
High Speed Train ◽  
Distribution Law ◽  
Element Analysis ◽  
Welding Sequence ◽  
Maximum Residual Stress

The finite element model of the roof of aluminum high-speed train was established, double ellipsoid heat source was employed, and heat elastic-plastic theory was used to simulate welding residual stress of the component under different welding sequence based on the finite element analysis software SYSWELD. The distribution law of welding residual stress was obtained. And the effects of the welding sequence on the value and distribution of residual stress was analyzed. The numerical results showed that the simulation data agree well with experimental test data. The maximum residual stress appears in the weld seam and nearby. The residual stress value decreases far away from the welding center. Welding sequence has a significant impact on the final welding residual stress when welding the roof of aluminum body. The side whose residual stress needs to be controlled should be welded first.

Optimization Design of DVG850 Worktable System Based on ANSYS Workbench

2012 ◽  
Vol 184-185 ◽  
pp. 356-359
Author(s):  
Jiang Miao Yi ◽  
Dong Qiang Gao ◽  
Fei Zhang ◽  
Huan Lin
Keyword(s):  
Modal Analysis ◽  
Natural Frequency ◽  
High Speed ◽  
Optimization Design ◽  
Element Model ◽  
Single Screw ◽  
Machining Center ◽  
The Finite Element Model ◽  
Better Than ◽  
Ansys Workbench

The finite element model of worktable system is created and modal analysis is made with ANSYS Workbench by taking DVG850 high-speed vertical machining center worktable system for example. We make modal analysis of single-screw strength general reinforcement worktable system and get the natural frequency and the vibration mode.Then in order to improve the system's natural frequency, the scheme of dual-screw worktable system is put forward. Also natural frequency and vibration mode is got. Finally, it is proved that the performance of dual-screw worktable system is significantly better than the single-screw one. This provides a reliable reference for further study on dynamic analysis of worktable system.

A new methodology for the estimation of wheel–rail contact forces at a high-frequency range

2018 ◽  
Vol 232 (10) ◽  
pp. 2353-2370 ◽  
Author(s):  
Vahid R Bagheri ◽  
Davood Younesian ◽  
Parisa H Tehrani
Keyword(s):  
High Speed ◽  
Radial Strain ◽  
Element Model ◽  
Contact Forces ◽  
Least Square ◽  
Characteristic Matrix ◽  
Rotating Speed ◽  
Ill Posed ◽  
Rolling Wheel ◽  
Rotating Load

Online measurement of wheel–rail contact forces is nowadays in demand for evaluating safety and manoeuvring the condition in real time and in real operation. In this study, the wheel–rail contact forces are estimated using a novel indirect identification method based on the measured radial strain on the wheel web. Further, the strain response of the rolling wheel is derived using an analytical solution of the disk under a rotating load, and a scheme was prepared for the identification of the rolling wheel parameters and its corresponding characteristic matrix. An appropriate angular strain configuration is employed to eliminate the effect of wheel rotation. The Tikhonov regularization technique is employed to solve the ill-posed least square problem and to attenuate the effect of noisy measurement and numerical uncertainty during the estimation of the forces. A finite element model of the rotating load is then constructed to investigate the effectiveness and accuracy of the proposed methodology. The effects of the rotating speed, loading and measurement noise on the estimated normal force are studied. It is found that neglecting the effect of the rotating speed causes a notable error particularly in the high-speed range.

Metamodeling Development for Vehicle Frontal Impact Simulation

2001 ◽  
Author(s):  
R. J. Yang ◽  
N. Wang ◽  
C. H. Tho ◽  
J. P. Bobineau ◽  
B. P. Wang
Keyword(s):  
Response Surface ◽  
Impact Analysis ◽  
Hybrid Approach ◽  
Latin Hypercube Sampling ◽  
Element Model ◽  
Least Square ◽  
Frontal Impact ◽  
Response Surface Methods ◽  
Moving Least Square ◽  
Highly Nonlinear

Abstract Response surface methods or metamodels are commonly used to approximate large engineering systems. This paper presents a new metric for evaluating a response surface method or a metamodeling technique. Five response surface methods are studied: Stepwise Regression, Moving Least Square, Kriging, Multiquadratic, and Adaptive and Interactive Modeling System. A real world frontal impact design problem is used as an example, which is a complex, highly nonlinear, transient, dynamic, large deformation finite element model. The optimal Latin Hypercube Sampling method is used to distribute the sampling points uniformly over the entire design space. The Root Mean Square Error is used as the error indicator to study the accuracy and convergence rate of the metamodels for this vehicle impact analysis. A hybrid approach/strategy for selecting the best metamodels of impact responses is proposed.

scholarly journals Simulation Analysis of a Multiple-Vehicle, High-Speed Train Collision Using a Simplified Model

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Suchao Xie ◽  
Weilin Yang ◽  
Ping Xu
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
High Speed ◽  
Large Scale ◽  
Computing Time ◽  
Element Model ◽  
Vehicle Body ◽  
Railway Vehicle ◽  
Storage Space ◽  
High Speed Train

To solve the problems associated with multiple-vehicle simulations of railway vehicles including large scale modelling, long computing time, low analysis efficiency, need for high performance computing, and large storage space, the middle part of the train where no plastic deformation occurs in the vehicle body was simplified using mass and beam elements. Comparative analysis of the collisions between a single railway vehicle (including head and intermediate vehicles before, and after, simplification) and a rigid wall showed that variations in impact kinetic energy, internal energy, and impact force (after simplification) are consistent with those of the unsimplified model. Meanwhile, the finite element model of a whole high-speed train was assembled based on the simplified single-vehicle model. The numbers of nodes and elements in the simplified finite element model of the whole train were 63.4% and 61.6%, respectively, compared to those of the unsimplified model. The simplified whole train model using the above method was more accurate than the multibody model. In comparison to the full-size finite element model, it is more specific, had more rapid computational speed, and saved a large amount of computational power and storage space. Finally, the velocity and acceleration data for every car were discussed through the analysis of the collision between two simplified trains at various speeds.

Analysis and Simulation on Dynamic Stress of Tracked Vehicle Sprocket Based on Rigid-Flexible Coupling

2011 ◽  
Vol 199-200 ◽  
pp. 1358-1361 ◽  
Author(s):  
Bing Chen ◽  
Zheng Tian ◽  
Zhong Jun Yin
Keyword(s):  
High Speed ◽  
Dynamic Stress ◽  
Element Model ◽  
Coupling Model ◽  
Tracked Vehicle ◽  
Flexible Coupling ◽  
Single Tooth ◽  
Gear Ring ◽  
Simulation Results ◽  
The Finite Element Model

This paper established a high-speed tracked vehicle dynamics model, and simulated the transient response of sprocket when the vehicle is running at 60km/h on the D class road. the finite element model of the single tooth in mesh is established in Ansys and the rigid-flexible coupling model of "trackboard- sprocket" is established in RecurDyn. The dynamic stress and strain fringe of the sprocket’s gear ring is achieved by analysis. Simulation results show that the stress of tracked vehicle sprocket gear root and the fixed gear bolt hole is larger, and the stress concentration is detected at the edge of contacted tooth. The simulation results provide the calculation basis for the optimization of the high-speed tracked vehicle system and its lifespan prediction.

Who Rides the High Speed Rail in the United States: The Acela Express Case Study

2010 ◽  
Author(s):  
Zhenhua Chen
Keyword(s):  
High Speed ◽  
The United States ◽  
External Factors ◽  
Least Square ◽  
High Speed Train ◽  
High Speed Rail ◽  
Rail Network ◽  
Policy Suggestions ◽  
Internal And External Factors

In this study, we focus on the Acela Express, and try to find out how selected internal and external factors affect the Acela Express’s ridership. A two-stage least square regression model is introduced in order to eliminate the endogeneity problem caused by price and ridership. Also the Cochrane-Orcutt Procedure is adopted to solve autocorrelation. The result shows that ticket price and train on-time performances, which are used to being thought as important factors affect ridership become insignificant, while other factors like employment of business and professional in the Northeast Corridor areas have higher influence on high speed train ridership. The broader objective of this research is to provide policy suggestions for building of an efficient high-speed rail network that can both be profitable and solve practical problems that the contemporary transportation system faces.

Modal Analysis of BT Spindle-Toolholder Interface Based on Abaqus/Standard

2013 ◽  
Vol 662 ◽  
pp. 632-636
Author(s):  
Yong Sheng Zhao ◽  
Jing Yang ◽  
Xiao Lei Song ◽  
Zi Jun Qi
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Modal Analysis ◽  
Dynamic Characteristics ◽  
High Speed ◽  
Element Model ◽  
Contact Theory ◽  
High Speed Machining ◽  
The Finite Element Model

The quality of high speed machining is directly related to dynamic characteristics of spindle-toolholder interface. The paper established normal and tangential interactions of BT spindle-toolholder interface based on finite element contact theory, and analysed free modal in Abaqus/Standard. Then the result was compared with the experimental modal analysis. It shows that the finite element model is effective and could be applied in the future dynamic study of high-speed spindle system.

scholarly journals Experimental and Analytical Characterization of Drop Impact Behavior for a Mobile Haptic Actuator

2017 ◽  
Author(s):  
Byungjoo Choi ◽  
Jiwoon Kwon ◽  
Yongho Jeon ◽  
Moon Gu Lee
Keyword(s):  
High Speed ◽  
Damping Ratio ◽  
Free Fall ◽  
Element Model ◽  
Impact Behavior ◽  
Air Resistance ◽  
Impact Reliability ◽  
The Impact ◽  
The Finite Element Model

Impact characterization of linear resonant actuator (LRA) is studied experimentally by newly developed drop tester, which can control various experimental uncertainty such as rotational moment, air resistance, secondary impact and so on. The feasibility of this test apparatus was verified by comparison with free fall test. By utilizing a high-speed camera and measuring the vibrational displacement of spring material, the impact behavior was captured and the damping ratio of the system was defined. Based on the above processes, the finite element model was established and the experimental and analytical results were successfully correlated. Finally, the damage of the system from impact loading can be expected by developed model and as a result, this research can improve the impact reliability of LRA.

Sign in / Sign up

Export Citation Format

Share Document