scholarly journals Effect of Copolymer Latexes on Physicomechanical Properties of Mortar Containing High Volume Fly Ash as a Replacement Material of Cement

2014 ◽  
Vol 2014 ◽  
pp. 1-11
Author(s):  
El-Sayed Negim ◽  
Latipa Kozhamzharova ◽  
Yeligbayeva Gulzhakhan ◽  
Jamal Khatib ◽  
Lyazzat Bekbayeva ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Compressive Strength ◽  
Fly Ash ◽  
Setting Time ◽  
High Volume ◽  
Physicomechanical Properties ◽  
Partial Replacement ◽  
Setting Times ◽  
High Volume Fly Ash ◽  
Scanning Electron

This paper investigates the physicomechanical properties of mortar containing high volume of fly ash (FA) as partial replacement of cement in presence of copolymer latexes. Portland cement (PC) was partially replaced with 0, 10, 20, 30 50, and 60% FA. Copolymer latexes were used based on 2-hydroxyethyl acrylate (2-HEA) and 2-hydroxymethylacrylate (2-HEMA). Testing included workability, setting time, absorption, chemically combined water content, compressive strength, and scanning electron microscopy (SEM). The addition of FA to mortar as replacement of PC affected the physicomechanical properties of mortar. As the content of FA in the concrete increased, the setting times (initial and final) were elongated. The results obtained at 28 days of curing indicate that the maximum properties of mortar occur at around 30% FA. Beyond 30% FA the properties of mortar reduce and at 60% FA the properties of mortar are lower than those of the reference mortar without FA. However, the addition of polymer latexes into mortar containing FA improved most of the physicomechanical properties of mortar at all curing times. Compressive strength, combined water, and workability of mortar containing FA premixed with latexes are higher than those of mortar containing FA without latexes.

scholarly journals Improvement of High-Volume Fly Ash Cementitious Material Using Single Alkali Activation

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Wichian Chalee ◽  
Reaksmey Soeurt ◽  
Pumipat Pachana ◽  
Smith Songpiriyakij
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Setting Time ◽  
High Volume ◽  
Cementitious Material ◽  
Partial Replacement ◽  
Alkali Activation ◽  
Type I ◽  
Alkali Activator ◽  
High Volume Fly Ash

AbstractThis research aimed to present the improvement of the cementitious material in high-volume fly ash using only one alkali activator. Fly ash was used as a partial replacement for Portland cement type I, varying from 0 to 60% by weight of the binder. Concentrations of NaOH varying from 0.00 to 1.25 molar were used as alkali activator. Paste properties and mortar compressive strength at the ages of 3, 7, 14, 28, 60, and 90 days of water curing were investigated. The results reveal that fly ash paste with an alkali activator provides shorter initial setting time when compared to control paste without alkali activator. The use of 0.50 molar NaOH concentration in mortar containing fly ash not exceeding 50% by weight of binder provides the highest compressive strength at any age of curing. At that concentration, there is a significant increase in the 28-day compressive strength of up to 45% over that of the control mortar. In addition, higher NaOH concentration (not exceeding 1.00 molar) has a significant positive effect on the compressive strength of mortar with higher fly ash content, especially over longer curing periods.

scholarly journals Influence of Particle Size Distribution of High Calcium Fly Ash on HVFA Mortar Properties

2018 ◽  
Vol 20 (2) ◽  
pp. 51
Author(s):  
Antoni . ◽  
Hendra Surya Wibawa ◽  
Djwantoro Hardjito
Keyword(s):  
Particle Size ◽  
Compressive Strength ◽  
Fly Ash ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Setting Time ◽  
High Volume ◽  
High Volume Fly Ash ◽  
High Calcium ◽  
High Calcium Fly Ash

This study evaluates the effect of particle size distribution (PSD) of high calcium fly ash on high volume fly ash (HVFA) mortar characteristics. Four PSD variations of high calcium fly ash used were: unclassified fly ash and fly ash passing sieve No. 200, No. 325 and No. 400, respectively. The fly ash replacement ratio of the cementitious material ranged between 50-70%. The results show that with smaller fly ash particles size and higher levels of fly ash replacement, the workability of the mixture was increased with longer setting time. There was an increase in mortar compressive strength with finer fly ash particle size, compared to those with unclassified ones, with the highest strength was found at those with fly ash passing mesh No. 325. The increase was found due to better compactability of the mixture. Higher fly ash replacement reduced the mortar’s compressive strength, however, the rate was reduced when finer fly ash particles was used.

Effect of Nano Silica and Ultrafine Fly Ash on Compressive Strength of High Volume Fly Ash Mortar

2013 ◽  
Vol 368-370 ◽  
pp. 1061-1065 ◽  
Author(s):  
Steve W.M. Supit ◽  
Faiz U.A. Shaikh ◽  
Prabir K. Sarker
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Volume ◽  
Partial Replacement ◽  
Strength Development ◽  
Test Results ◽  
X Ray Diffraction ◽  
Nano Silica ◽  
High Volume Fly Ash ◽  
Class F Fly Ash

This paper evaluates the effect of Ultrafine Fly Ash (UFFA) and nanoSilica (NS) on compressive strength of high volume fly ash (HVFA) mortar at 7 days and 28 days. Three series of mortar mixes are considered in the first part of this study. In the first series the effect of high content of class F fly ash as partial replacement of cement at 40, 50 and 60% (by wt.) are considered. While in the second and third series, the UFFA and NS are used as partial replacement of cement at 5%, 8%, 10%, 12% and 15% and 1%, 2%, 4%, 6% and 8% (by wt.) of cement, respectively. The UFFA and the NS content which exhibited highest compressive strength in the above series are used in the second part where their effects on the compressive strength of HVFA mortars are evaluated. Results show that the mortar containing 10% UFFA as partial replacement of cement exhibited the highest compressive strength at both 7 and 28 days among all UFFA contents. Similarly, the mortar containing 2% NS as partial replacement of cement exhibited the best performance. Interestingly, the use of UFFA in HVFA mortars did not improve the compressive strength. However, the use of 2% and 4% NS showed improvement in the compressive strength of HVFA mortar containing 40% and 50% fly ash at both ages. The effects of NS and UFFA on the hydration and strength development of HVFA mortar is also evaluated through X-Ray Diffraction (XRD) test. Results also show that the UFFA and NS can significantly reduce the calcium hydroxide (CH) in HVFA mortars.

scholarly journals Early-age Properties of High-volume Fly Ash Concrete Mixes for Pavement: Volume 2

2021 ◽  
Author(s):  
Aniruddha Baral ◽  
◽  
Jeffery Roesler ◽  
Junryu Fu ◽  
◽  
...  
Keyword(s):  
Fly Ash ◽  
Setting Time ◽  
High Volume ◽  
Early Age ◽  
X Ray ◽  
Fly Ash Concrete ◽  
Setting Times ◽  
Chemical Admixtures ◽  
High Volume Fly Ash ◽  
Foam Index

High-volume fly ash concrete (HVFAC) is more cost-efficient, sustainable, and durable than conventional concrete. This report presents a state-of-the-art review of HVFAC properties and different fly ash characterization methods. The main challenges identified for HVFAC for pavements are its early-age properties such as air entrainment, setting time, and strength gain, which are the focus of this research. Five fly ash sources in Illinois have been repeatedly characterized through x-ray diffraction, x-ray fluorescence, and laser diffraction over time. The fly ash oxide compositions from the same source but different quarterly samples were overall consistent with most variations observed in SO3 and MgO content. The minerals present in various fly ash sources were similar over multiple quarters, with the mineral content varying. The types of carbon present in the fly ash were also characterized through x-ray photoelectron spectroscopy, loss on ignition, and foam index tests. A new computer vision–based digital foam index test was developed to automatically capture and quantify a video of the foam layer for better operator and laboratory reliability. The heat of hydration and setting times of HVFAC mixes for different cement and fly ash sources as well as chemical admixtures were investigated using an isothermal calorimeter. Class C HVFAC mixes had a higher sulfate imbalance than Class F mixes. The addition of chemical admixtures (both PCE- and lignosulfonate-based) delayed the hydration, with the delay higher for the PCE-based admixture. Both micro- and nano-limestone replacement were successful in accelerating the setting times, with nano-limestone being more effective than micro-limestone. A field test section constructed of HVFAC showed the feasibility and importance of using the noncontact ultrasound device to measure the final setting time as well as determine the saw-cutting time. Moreover, field implementation of the maturity method based on wireless thermal sensors demonstrated its viability for early opening strength, and only a few sensors with pavement depth are needed to estimate the field maturity.

scholarly journals Compressive Strength of High-Volume Fly Ash (HVFA) Concrete as a Function of Lime Water and Curing Time

2021 ◽  
Author(s):  
Chin Mei Yun ◽  
Md. Rezaur Rahman ◽  
Kuok King Kuok ◽  
Mohd Elfy Mersal ◽  
Colin Ngu Ker Liing ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Portland Cement ◽  
High Volume ◽  
Partial Replacement ◽  
Curing Time ◽  
Additional Information ◽  
Lime Water ◽  
High Volume Fly Ash

Abstract The compressive strength of high-volume fly ash (HVFA) concrete with varied volume percentages of 40%, 50%, and 60% was examined utilizing low calcium fly ash (Class-F) as a partial replacement for regular Portland cement in this study. On the 7th, 28th, and 56th days, the compressive strength is tested. At the 7th and 28th days, the influence of saturated lime water on the compressive strength of HVFA concrete is evaluated. The inclusion of fly ash as a replacement for Portland cement reduces the compressive strength of the HVFA concrete, according to the findings. At the 56th day, the HVFA concrete with 40% fly ash substitution has a compressive strength equivalent to the regular weight concrete. At the 28th day, it was discovered that saturated lime water was helpful in maximizing the strength of HVFA concrete with 50% fly ash substitution. There was additional information about the characterization of HVFA concrete.

scholarly journals A Review on Early Age and Long-term Compressive Strength of High-volume Fly Ash Concrete

2018 ◽  
Vol 207 ◽  
pp. 01004
Author(s):  
Mu Li
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Volume ◽  
Partial Replacement ◽  
Early Age ◽  
Fly Ash Concrete ◽  
Power Stations ◽  
High Volume Fly Ash ◽  
Curing Age

Fly ash is a by-product of the combustion of the coal-fired electric power stations, and disposal of fly ash has been one of the environmental challenges. Much of the studies have been focused on the mechanical property of fly ash concrete. It is no doubt that the use of high-volume fly ash as a partial replacement of cement is also one of the effect way to utilize fly ash. It is known that the compressive strength of fly ash concrete is lower than that of ordinary concrete at early age, especially for high-volume fly ash concrete. It is urgent for engineers to consider the compressive strength of high-volume fly ash concrete at different curing age. In this review, the compressive strength of high-volume fly ash concrete in various literature was reported and then analyzed. Furthermore, the proposal of the utilization of high-volume fly ash concrete is provided.

scholarly journals Effect of Waste Clay Brick Powder on Physical and Mechanical Properties of Cement Paste

2021 ◽  
Vol 15 (1) ◽  
pp. 370-380
Author(s):  
David Sinkhonde ◽  
Richard Ocharo Onchiri ◽  
Walter Odhiambo Oyawa ◽  
John Nyiro Mwero
Keyword(s):  
Compressive Strength ◽  
Cement Paste ◽  
Setting Time ◽  
Partial Replacement ◽  
Clay Brick ◽  
X Ray ◽  
Cement Replacement ◽  
Clay Bricks ◽  
Brick Powder ◽  
Scanning Electron

Background: Investigations on the use of waste clay brick powder in concrete have been extensively conducted, but the analysis of waste clay brick powder effects on cement paste is limited. Materials and Methods: This paper discusses the effects of waste clay brick powder on cement paste. Fragmented clay bricks were grounded in the laboratory using a ball mill and incorporated into cementitious mixes as partial replacement of Ordinary Portland Cement. Workability, consistency, setting time, density and compressive strength properties of paste mixes were investigated to better understand the impact of waste clay brick powder on the cementitious paste. Four cement replacement levels of 2.5%, 5%, 7.5% and 10% were evaluated in comparison with the control paste. The chemical and mineral compositions were evaluated using X-Ray Fluorescence and X-Ray Diffractometer, respectively. The morphology of cement and waste clay brick powder was examined using a scanning electron microscope. Results: The investigation of workability exhibited a reduction of slump attributed to the significant addition of waste clay brick powder into the cementitious mixes, and it was concluded that waste clay brick powder did not significantly influence the density of the mixes. In comparison with the control paste, increased values of consistency and setting time of cement paste containing waste clay brick powder confirmed the information available in the literature. Conclusion: Although waste clay brick powder decreased the compressive strength of cement paste, 5% partial cement replacement with waste clay brick powder was established as an optimum percentage for specimens containing waste clay brick powder following curing periods of 7 and 28 days. Findings of chemical composition, mineral composition and scanning electron microscopy of waste clay brick powder demonstrated that when finely ground, fragmented clay bricks can be used in concrete as a pozzolanic material.

scholarly journals Effect of mix design inputs, curing and compressive strength on the durability of Na2SO4-activated high volume fly ash concretes

2018 ◽  
Vol 91 ◽  
pp. 11-20 ◽  
Author(s):  
Diego F. Velandia ◽  
Cyril J. Lynsdale ◽  
John L. Provis ◽  
Fernando Ramirez
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Volume ◽  
Mix Design ◽  
High Volume Fly Ash

UTILIZATION OF FLY ASH AND CONCRETE RESIDUE IN THE PRODUCTION OF GEOPOLYMER BRICKS

2017 ◽  
Vol 12 (1) ◽  
pp. 63-77 ◽  
Author(s):  
Siriporn Sirikingkaew ◽  
Nuta Supakata
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Compressive Strength ◽  
Phase Composition ◽  
Fly Ash ◽  
Industrial Waste ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

This study presents the development of geopolymer bricks synthetized from industrial waste, including fly ash mixed with concrete residue containing aluminosilicate compound. The above two ingredients are mixed according to five ratios: 100:0, 95:5, 90:10, 85:15, and 80:20. The mixture's physico-mechanical properties, in terms of water absorption and the compressive strength of the geopolymer bricks, are investigated according to the TIS 168-2546 standard. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses are used to investigate the microstructure and the elemental and phase composition of the brick specimens. The results indicate that the combination of fly ash and concrete residue represents a suitable approach to brick production, as required by the TIS 168–2546 standard.

Sign in / Sign up

Export Citation Format

Share Document