scholarly journals Numerical Solution of Boundary Layer MHD Flow with Viscous Dissipation

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
S. R. Mishra ◽  
S. Jena
Keyword(s):  
Differential Equations ◽  
Viscous Dissipation ◽  
Graphical Representation ◽  
Mhd Flow ◽  
Transverse Magnetic ◽  
Shrinking Sheet ◽  
Shooting Technique ◽  
Electrically Conducting ◽  
Similarity Transformations ◽  
Runge Kutta Method

The present paper deals with a steady two-dimensional laminar flow of a viscous incompressible electrically conducting fluid over a shrinking sheet in the presence of uniform transverse magnetic field with viscous dissipation. Using suitable similarity transformations the governing partial differential equations are transformed into ordinary differential equations and then solved numerically by fourth-order Runge-Kutta method with shooting technique. Results for velocity and temperature profiles for different values of the governing parameters have been discussed in detail with graphical representation. The numerical evaluation of skin friction and Nusselt number are also given in this paper.

scholarly journals Effects of ohmic heating and viscous dissipation on steady MHD flow near a stagnation point on an isothermal stretching sheet

2009 ◽  
Vol 13 (1) ◽  
pp. 5-12 ◽  
Author(s):  
Pushkar Sharma ◽  
Gurminder Singh
Keyword(s):  
Stagnation Point ◽  
Viscous Dissipation ◽  
Ohmic Heating ◽  
Mhd Flow ◽  
Transverse Magnetic ◽  
Skin Friction Coefficient ◽  
Physical Parameters ◽  
Governing Equations ◽  
Shooting Technique ◽  
Electrically Conducting

Aim of the paper is to investigate effects of ohmic heating and viscous dissipation on steady flow of a viscous incompressible electrically conducting fluid in the presence of uniform transverse magnetic field and variable free stream near a stagnation point on a stretching non-conducting isothermal sheet. The governing equations of continuity, momentum, and energy are transformed into ordinary differential equations and solved numerically using Runge-Kutta fourth order with shooting technique. The velocity and temperature distributions are discussed numerically and presented through graphs. Skin-friction coefficient and the Nusselt number at the sheet are derived, discussed numerically, and their numerical values for various values of physical parameters are compared with earlier results and presented through tables.

MHD FLOW OF AN EYRING-POWELL FLUID WITH THE EFFECT OF THERMAL RADIATION, JOULE HEATING AND VISCOUS DISSIPATION

2020 ◽  
Vol 9 (11) ◽  
pp. 9259-9271
Author(s):  
K.R. Babu ◽  
G. Narender ◽  
K. Govardhan
Keyword(s):  
Differential Equations ◽  
Thermal Radiation ◽  
Ordinary Differential Equations ◽  
Viscous Dissipation ◽  
Joule Heating ◽  
Mhd Flow ◽  
Physical Parameters ◽  
Shooting Technique ◽  
Similarity Transformations ◽  
The Magnetic Field

A two-dimensional stream of an magnetohydrodynamics (MHD) Eyring-Powell fluid on a stretching surface in the presence of thermal radiation, viscous dissipation and the Joule heating is analyzed. The flow model in the form of the Partial Differential Equations (PDEs) is transformed into a system of non-linear and coupled Ordinary Differential Equations (ODEs) by implementing appropriate similarity transformations. The resulting ordinary differential equations are solved numerically by the shooting technique with Adams-Moulton Method of fourth order. The numerical solution obtained for the velocity and temperature profiles has been presented through graphs for different choice of the physical parameters. The magnetic field is found to have a direct relation with the temperature profile and an inverse with the velocity profile. Increasing the thermal radiation, the temperature tends to rise.

scholarly journals Inclusion of Viscous Dissipation on the Boundary Layer Flow of Cu-TiO2 Hybrid Nanofluid over Stretching/Shrinking Sheet

2021 ◽  
Vol 88 (2) ◽  
pp. 64-79
Author(s):  
Yap Bing Kho ◽  
Rahimah Jusoh ◽  
Mohd Zuki Salleh ◽  
Muhammad Khairul Anuar Mohamed ◽  
Zulkhibri Ismail ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Differential Equations ◽  
Viscous Dissipation ◽  
Boundary Layer Flow ◽  
Skin Friction Coefficient ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Suction Parameter ◽  
Similarity Transformations ◽  
Layer Flow

The effects of viscous dissipation on the boundary layer flow of hybrid nanofluids have been investigated. This study presents the mathematical modelling of steady two dimensional boundary layer flow of Cu-TiO2 hybrid nanofluid. In this research, the surface of the model is stretched and shrunk at the specific values of stretching/shrinking parameter. The governing partial differential equations of the hybrid nanofluid are reduced to the ordinary differential equations with the employment of the appropriate similarity transformations. Then, Matlab software is used to generate the numerical and graphical results by implementing the bvp4c function. Subsequently, dual solutions are acquired through the exact guessing values. It is observed that the second solution adhere to less stableness than first solution after performing the stability analysis test. The existence of viscous dissipation in this model is dramatically brought down the rate of heat transfer. Besides, the effects of the suction and nanoparticles concentration also have been highlighted. An increment in the suction parameter enhances the magnitude of the reduced skin friction coefficient while the augmentation of concentration of copper and titanium oxide nanoparticles show different modes.

scholarly journals Radiation and chemical reaction effects on MHD flow along a moving vertical porous plate

2016 ◽  
Vol 21 (1) ◽  
pp. 157-168 ◽  
Author(s):  
G.V. Ramana Reddy ◽  
N. Bhaskar Reddy ◽  
R.S.R. Gorla
Keyword(s):  
Chemical Reaction ◽  
Porous Plate ◽  
Mhd Flow ◽  
Shooting Technique ◽  
Vertical Porous Plate ◽  
Similarity Transformations ◽  
Runge Kutta Method ◽  
Self Similar ◽  
Flow Variables ◽  
Transfer Flow

Abstract This paper presents an analysis of the effects of magnetohydrodynamic force and buoyancy on convective heat and mass transfer flow past a moving vertical porous plate in the presence of thermal radiation and chemical reaction. The governing partial differential equations are reduced to a system of self-similar equations using the similarity transformations. The resultant equations are then solved numerically using the fourth order Runge-Kutta method along with the shooting technique. The results are obtained for the velocity, temperature, concentration, skin-friction, Nusselt number and Sherwood number. The effects of various parameters on flow variables are illustrated graphically, and the physical aspects of the problem are discussed.

scholarly journals Effects of Chemical Reaction on Dissipative Radiative MHD Flow through a Porous Medium over a Nonisothermal Stretching Sheet

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
S. Mohammed Ibrahim
Keyword(s):  
Porous Medium ◽  
Differential Equations ◽  
Chemical Reaction ◽  
Stretching Sheet ◽  
Saturated Porous Medium ◽  
Mhd Flow ◽  
Electrically Conducting ◽  
Similarity Transformations ◽  
Temperature Parameter ◽  
Layer Flow

The steady two-dimensional radiative MHD boundary layer flow of an incompressible, viscous, electrically conducting fluid caused by a nonisothermal linearly stretching sheet placed at the bottom of fluid saturated porous medium in the presence of viscous dissipation and chemical reaction is studied. The governing system of partial differential equations is converted to ordinary differential equations by using the similarity transformations, which are then solved by shooting method. The dimensionless velocity, temperature, and concentration are computed for different thermophysical parameters, namely, the magnetic parameter, permeability parameter, radiation parameter, wall temperature parameter, Prandtl number, Eckert number, Schmidt number, and chemical reaction.

Melting heat transfer in boundary layer stagnation-point flow of a nanofluid towards a stretching–shrinking sheet

2014 ◽  
Vol 92 (12) ◽  
pp. 1703-1708 ◽  
Author(s):  
Kishore Kumar Ch. ◽  
Shankar Bandari
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Skin Friction Coefficient ◽  
Stagnation Point Flow ◽  
Shrinking Sheet ◽  
Shooting Technique ◽  
Similarity Transformations ◽  
Flow And Heat Transfer ◽  
Fourth Order Method

The present analysis deals with the study of two-dimensional stagnation-point flow and heat transfer from a warm, laminar liquid flow of a nanofluid towards a melting stretching sheet. Using similarity transformations, the governing differential equations were transformed into coupled, nonlinear ordinary differential equations, which were then solved numerically by using the Runge–Kutta fourth-order method along with the shooting technique for two types of nanoparticles namely copper (Cu) and silver (Ag) in the water-based fluid with Prandtl number Pr = 6.2, the skin friction coefficient, the local Nusselt number, the velocity and the temperature profiles are presented graphically and discussed.

scholarly journals Effects of Stefan Blowing and Slip Conditions on Unsteady MHD Casson Nanofluid Flow Over an Unsteady Shrinking Sheet: Dual Solutions

Symmetry ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 487 ◽  
Author(s):  
Liaquat Ali Lund ◽  
Zurni Omar ◽  
Jawad Raza ◽  
Ilyas Khan ◽  
El-Sayed M. Sherif
Keyword(s):  
Boundary Layer ◽  
Differential Equations ◽  
Mhd Flow ◽  
Dual Solutions ◽  
Partial Slip ◽  
Shrinking Sheet ◽  
Physical Parameters ◽  
Casson Nanofluid ◽  
Slip Conditions ◽  
Similarity Transformations

In this article, the magnetohydrodynamic (MHD) flow of Casson nanofluid with thermal radiation over an unsteady shrinking surface is investigated. The equation of momentum is derived from the Navier–Stokes model for non-Newtonian fluid where components of the viscous terms are symmetric. The effect of Stefan blowing with partial slip conditions of velocity, concentration, and temperature on the velocity, concentration, and temperature distributions is also taken into account. The modeled equations of partial differential equations (PDEs) are transformed into the equivalent boundary value problems (BVPs) of ordinary differential equations (ODEs) by employing similarity transformations. These similarity transformations can be obtained by using symmetry analysis. The resultant BVPs are reduced into initial value problems (IVPs) by using the shooting method and then solved by using the fourth-order Runge–Kutta (RK) technique. The numerical results reveal that dual solutions exist in some ranges of different physical parameters such as unsteadiness and suction/injection parameters. The thickness of the velocity boundary layer is enhanced in the second solution by increasing the magnetic and velocity slip factor effect in the boundary layer. Increment in the Prandtl number and Brownian motion parameter is caused by a reduction of the thickness of the thermal boundary layer and temperature. Moreover, stability analysis performed by employing the three-stage Lobatto IIIA formula in the BVP4C solver with the help of MATLAB software reveals that only the first solution is stable and physically realizable.

scholarly journals MHD flow due to stretching sheet embedded in non Darcian porous medium with thermal stratification effects

2018 ◽  
Vol 15 (1) ◽  
pp. 65-74
Author(s):  
Annu Banshiwal ◽  
M. Goyal
Keyword(s):  
Porous Medium ◽  
Heat Source ◽  
Viscous Fluid ◽  
Viscous Dissipation ◽  
Thermal Stratification ◽  
Stretching Sheet ◽  
Mhd Flow ◽  
Kutta Method ◽  
Electrically Conducting ◽  
Runge Kutta Method

The aim of present study is to analyze the non- Darcian effects on unsteady non-linear MHD flow of an incompressible, electrically conducting and viscous fluid over a stretching sheet embedded in a porous medium with heat source, viscous dissipation and thermal stratification. The dimensionless governing equation solved numerically by using 4th order Runge - Kutta method. The effects of pertinent parameters on velocity and temperature depicted graphically.

scholarly journals Magnetohydrodynamic (MHD) Flow of Micropolar Fluid with Effects of Viscous Dissipation and Joule Heating Over an Exponential Shrinking Sheet: Triple Solutions and Stability Analysis

Symmetry ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 142 ◽  
Author(s):  
Liaquat Ali Lund ◽  
Zurni Omar ◽  
Ilyas Khan ◽  
Jawad Raza ◽  
El-Sayed M. Sherif ◽  
...  
Keyword(s):  
Stability Analysis ◽  
Differential Equations ◽  
Viscous Dissipation ◽  
Joule Heating ◽  
Micropolar Fluid ◽  
Numerical Study ◽  
Mhd Flow ◽  
Shrinking Sheet ◽  
Linear Ordinary Differential Equations ◽  
All Solutions

A numerical study was carried out to examine the magnetohydrodynamic (MHD) flow of micropolar fluid on a shrinking surface in the presence of both Joule heating and viscous dissipation effects. The governing system of non-linear ordinary differential equations (ODEs) was obtained from the system of partial differential equations (PDEs) by employing exponential transformations. The resultant equations were transformed into initial value problems (IVPs) by shooting technique and then solved by the Runge–Kutta (RK) method. The effects of different parameters on velocity, angular velocity, temperature profiles, skin friction coefficient, and Nusselt number were obtained and demonstrated graphically. We observed that multiple solutions occurred in certain assortments of the parameters for suction on a surface. The stability analysis of solutions was performed, and we noted that the first solution was stable while the remaining two solutions were not. The results also showed that the velocity of the fluid increased as the non-Newtonian parameter rose in all solutions. Furthermore, it was detected that the temperature of fluid rose at higher values of the Eckert number in all solutions.

scholarly journals Viscous Dissipation and Suction characteristics of Heat and Mass Transfer past a Stretching Sheet.

2021 ◽  
Vol 12 (1S) ◽  
pp. 623-630
Author(s):  
AlfunsaPrathiba, Et. al.
Keyword(s):  
Mass Transfer ◽  
Differential Equations ◽  
Heat And Mass Transfer ◽  
Viscous Dissipation ◽  
Schmidt Number ◽  
Stretching Sheet ◽  
Mhd Flow ◽  
Skin Friction Coefficient ◽  
Linear Ordinary Differential Equations ◽  
Similarity Transformations

in this paper, we analyzed the effect of a suction and Soret number on heat and mass transfer Magneto Hydrodynamics (MHD) flow past an exponentially stretching sheet with the heat source/sink. Appropriate similarity transformations were employed to convert the governing partial differential equations to a set of highly non-linear ordinary differential equations, which was then solved numerically by Runga kutta sixth order method together with shooting technique. The Numerical results are obtained for the skin friction coefficient, Nusselt and Sherwood numbers for selected values of the governing parameters, such as the suction, magnetic field parameter  , viscous dissipation parameter  , heat generation parameter  , Schmidt number  , and the chemical reaction rate parameter  . Besides, it is obtained that the concentration profile decreases with an increment of the Schmidt number. A comparison was made with a previous study available in the literature and we found that it is in a good agreement.

Sign in / Sign up

Export Citation Format

Share Document