scholarly journals Heavy Metal Adsorption ontoKappaphycussp. from Aqueous Solutions: The Use of Error Functions for Validation of Isotherm and Kinetics Models

2015 ◽  
Vol 2015 ◽  
pp. 1-13 ◽  
Author(s):  
Md. Sayedur Rahman ◽  
Kathiresan V. Sathasivam
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Aqueous Solutions ◽  
Kinetic Models ◽  
Adsorption Process ◽  
Low Cost ◽  
Metal Adsorption ◽  
Red Seaweed ◽  
Error Functions ◽  
Removal Of Heavy Metals

Biosorption process is a promising technology for the removal of heavy metals from industrial wastes and effluents using low-cost and effective biosorbents. In the present study, adsorption of Pb2+, Cu2+, Fe2+, and Zn2+onto dried biomass of red seaweedKappaphycussp. was investigated as a function of pH, contact time, initial metal ion concentration, and temperature. The experimental data were evaluated by four isotherm models (Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich) and four kinetic models (pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion models). The adsorption process was feasible, spontaneous, and endothermic in nature. Functional groups in the biomass involved in metal adsorption process were revealed as carboxylic and sulfonic acids and sulfonate by Fourier transform infrared analysis. A total of nine error functions were applied to validate the models. We strongly suggest the analysis of error functions for validating adsorption isotherm and kinetic models using linear methods. The present work shows that the red seaweedKappaphycussp. can be used as a potentially low-cost biosorbent for the removal of heavy metal ions from aqueous solutions. Further study is warranted to evaluate its feasibility for the removal of heavy metals from the real environment.

scholarly journals Heavy metal removal from wastewater using various adsorbents: a review

2016 ◽  
Vol 7 (4) ◽  
pp. 387-419 ◽  
Author(s):  
Renu ◽  
Madhu Agarwal ◽  
K. Singh
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Aquatic Ecosystems ◽  
Adsorption Process ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Review Article ◽  
Removal Capacity ◽  
Removal Of Heavy Metals

Heavy metals are discharged into water from various industries. They can be toxic or carcinogenic in nature and can cause severe problems for humans and aquatic ecosystems. Thus, the removal of heavy metals from wastewater is a serious problem. The adsorption process is widely used for the removal of heavy metals from wastewater because of its low cost, availability and eco-friendly nature. Both commercial adsorbents and bioadsorbents are used for the removal of heavy metals from wastewater, with high removal capacity. This review article aims to compile scattered information on the different adsorbents that are used for heavy metal removal and to provide information on the commercially available and natural bioadsorbents used for removal of chromium, cadmium and copper, in particular.

scholarly journals Treatment of Poultry Wastewater Using Shells from African Cherry Seeds, Egg and Crab

2020 ◽  
pp. 16-30
Author(s):  
Abimbola O. Aleshinloye ◽  
Kemayou Ngangsso ◽  
Feyisara B. Adaramola ◽  
Adebayo Onigbinde
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Microwave Plasma ◽  
Low Cost ◽  
Chloride Content ◽  
Agricultural Wastes ◽  
Wastewater Sample ◽  
Animal Source ◽  
Removal Of Heavy Metals ◽  
Poultry Wastewater

This study investigated the potential of some agricultural wastes viz; African Star apple seed shell (ASS, plant source), crab shell (CS, animal source) and chicken egg shell (ES, animal source) as eco-friendly and low-cost biological materials for the removal of heavy metals from poultry wastewater. TS, TSS and TDS of the wastewater sample were assayed by filtration methods, chloride content by previously reported method and heavy metal contents (Zn, V, Cd, Fe, Ni, Cu, Co, Pb, Cr and Mn); were analyzed using Microwave Plasma Atomic Emission Spectrometer. The results of the solids and chloride contents of the poultry wastewater were TDS (3100 mg/L), TS (3700 mg/L), TSS (6000 mg/L) and chloride (4.7 g/L); all above the EPA permissible limits. Results of the FTIR analysis showed that ASS is an amide polymer while the CS and ES shells are mixtures of amide and carbonate polymers. Also, results of heavy metal analysis before and after adsorption showed that ASS caused removal of Zn, V, Fe, Cu, Co/ Pb and Mn by 48.27, 32.22, 49.64, 91.44, 100 and 82.39% respectively while Cd, Ni and Cr contents increased by 31, 61 and 48.3% respectively. CS showed removal of Fe, Ni/ Co/ Cr, Pb and Mn by 89.64, 100, 3.51 and 95.96% respectively while Zn, V, Cd and Cu contents increased by 1.7, 61.2, 76.1 and 68.1% respectively. Meanwhile, with ES, the contents of Zn, Fe, Ni, Cu, Cr and Mn increased by 31.56, 86.36, 100, 55.5, 45.80 and 90.33% respectively while the contents of V, Cd, Co and Pb decreased by 78.9, 86.7, 42.5 and 46.2% respectively. This study demonstrated the use of ASS, CS and ES as low- cost and eco-friendly agricultural wastes with significant potential for removal of heavy metals from wastewaters.

scholarly journals Various Absorbents and Parameters Affecting Removal of Water Hardness from Wastewater: Review

2020 ◽  
Vol 6 (3) ◽  
Author(s):  
Tamiru M ◽  
Bekele G
Keyword(s):  
Heavy Metals ◽  
Nanostructured Materials ◽  
Adsorption Process ◽  
Review Paper ◽  
Low Cost ◽  
Water Hardness ◽  
The World ◽  
Removal Of Heavy Metals ◽  
Different Sources

Discharges of heavy metals from different sources to the water lead to water hardness which is the major problem of the world due to their toxic and carcinogenic nature. Among several methods to eliminate heavy metals, absorption is the leading technique for the removal of heavy metals from wastewater because it is efficient, available, low-cost, and eco-friend. This review paper gives detail information about adsorbents on both conventional and nanostructured materials, either occur naturally or available commercially. The review also contains properties and parameters which affect the adsorption process with essential clarifications that are given by researchers.

Low Cost Absorbents, Techniques, and Heavy Metal Removal Efficiency

2018 ◽  
pp. 50-79
Author(s):  
Harendra Kumar Sharma ◽  
Irfan Rashid Sofi ◽  
Khursheed Ahmad Wani
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Heavy Metal Contamination ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Future Research ◽  
Removal Of Heavy Metals ◽  
Living Species ◽  
High Concentrations

Heavy metal contamination in water is a serious concern to the environment and human health. High concentrations of heavy metals in the environment can be toxic to a variety of living species. Natural bio-absorbents are abundant and inexpensive and considered a waste if not managed properly. The role of bio-absorbents has been widely studied and has been utilized for the removal of heavy metals. The objective of the chapter is to search the database for different absorbents and their efficiency for the removal of heavy metals. Key words related to the study have been used to select different papers published by the researchers all over the world. A rigorous three-tier process has been utilized by the authors to select the papers from the database for the current study. This chapter has identified a few research gaps in the field of heavy metal removal by using different low cast absorbents that need to be taken into account in future research.

scholarly journals Preparation and Characterization of Activated Carbon from Bagasse and Jute Fibre for Heavy Metal Adsorption

2019 ◽  
pp. 17-34
Author(s):  
Md. Shazzad Hossain ◽  
Farzana Khan Rony ◽  
Sazia Sultana ◽  
Md.Humayun Kabir ◽  
Sumaya F. Kabir ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Activated Carbon ◽  
Raw Materials ◽  
Low Cost ◽  
Treatment Method ◽  
Jute Fibre ◽  
Removal Of Heavy Metals ◽  
Atomic Adsorption Spectroscopy

Over the past few years, activated carbon (AC) has attained significant attention as an efficient adsorbent for heavy metal (lead, cadmium, chromium etc.) removal. In Bangladesh, bagasse and jute fibre are the two most potential raw materials for producing activated carbon due to their high availability and low cost. The activated carbon was produced by thermal treatment method. The produced AC were characterized using FTIR, XRD, SEM etc. Batch experiments under agitation was also carried out for adsorption of heavy metals and then characterized using AAS (Atomic Adsorption Spectroscopy). Adsorption with commercially available activated carbon was also done to use as standard. Among all ACs produced in this study, the highest percentage removal of heavy metals which were Cr3+ and Cd2+ was at 57.06% and 43.01% respectively for J-400 ( AC produced from jute fibre at 4000C). This obtained value was 16.6% and 12.9% higher in comparison to Commercially available Activated carbon for Cr3+ and Cd2+ respectively.

Study of the Cu(II) removal from aqueous solutions by adsorption on titania

2013 ◽  
Vol 12 (3) ◽  
pp. 239-247
Keyword(s):  
Heavy Metals ◽  
Ionic Strength ◽  
Toxic Metals ◽  
Low Cost ◽  
Lateral Interaction ◽  
Tio2 Surface ◽  
High Toxicity ◽  
Removal Of Heavy Metals ◽  
Solution Parameters ◽  
Kinetics Of

The removal of heavy metals from wastewaters is a matter of paramount importance due to the fact that their high toxicity causes major environmental pollution problems. One of the most efficient, applicable and low cost methods for the removal of toxic metals from aqueous solutions is that of their adsorption on an inorganic adsorbent. In order to achieve high efficiency, it is important to understand the influence of the solution parameters on the extent of the adsorption, as well as the kinetics of the adsorption. In the present work, the adsorption of Cu(II) species onto TiO2 surface was studied. It was found that the adsorption is a rapid process and it is not affected by the value of ionic strength. In addition, it was found that by increasing the pH, the adsorbed amount of Cu2+ ions and the value of the adsorption constant increase, whereas the value of the lateral interaction energy decreases.

Applications of Bentonite to Soil Decontamination

2018 ◽  
Vol 69 (7) ◽  
pp. 1695-1698
Author(s):  
Marin Rusanescu ◽  
Carmen Otilia Rusanescu ◽  
Gheorghe Voicu ◽  
Mihaela Begea
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Laboratory Experiments ◽  
Experimental Studies ◽  
Heavy Metal Concentration ◽  
Polluted Soil ◽  
Raw Material ◽  
Soil Decontamination ◽  
Metal Retention ◽  
Removal Of Heavy Metals

A calcium bentonite from Orasu Nou deposit (Satu Mare Romania) was used as raw material. We have conducted laboratory experiments to determine the influence of bentonite on the degree of heavy metal retention. It has been observed that the rate of retention increases as the heavy metal concentration decreases. Experimental studies have been carried out on metal retention ( Zn) in bentonite. In this paper, we realized laboratory experiments for determining the influence of metal (Zn) on the growth and development of two types of plants (Pelargonium domesticum and Kalanchoe) and the effect of bentonite on the absorption of pollutants. These flowers were planted in unpolluted soil, in heavy metal polluted soil and in heavy metal polluted soil to which bentonite was added to observe the positive effect of bentonite. It has been noticed that the flowers planted in unpolluted soil and polluted with heavy metals to which bentonite has been added, the flowers have flourished, the leaves are still green and the plants whose soils have been polluted with heavy metals began to dry after 6 days, three weeks have yellowish leaves and flowers have dried. Experiments have demonstrated the essential role of bentonite for the removal of heavy metals polluted soil.

Sign in / Sign up

Export Citation Format

Share Document