scholarly journals Preparation of Modified Films with Protein from Grouper Fish

2016 ◽  
Vol 2016 ◽  
pp. 1-9
Author(s):  
M. A. Valdivia-López ◽  
A. Tecante ◽  
S. Granados-Navarrete ◽  
C. Martínez-García
Keyword(s):  
Water Vapor ◽  
Food Packaging ◽  
Fracture Strain ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Tensile Fracture ◽  
Attractive Alternative ◽  
Vapor Permeability ◽  
Calcium Salts ◽  
V Protein

A protein concentrate (PC) was obtained from Grouper fish skin and it was used to prepare films with different amounts of sorbitol and glycerol as plasticizers. The best performing films regarding resistance were then modified with various concentrations of CaCl2, CaSO4(calcium salts), and glucono-δ-lactone (GDL) with the purpose of improving their mechanical and barrier properties. These films were characterized by determining their mechanical properties and permeability to water vapor and oxygen. Formulations with 5% (w/v) protein and 75% sorbitol and 4% (w/v) protein with a mixture of 15% glycerol and 15% sorbitol produced adequate films. Calcium salts and GDL increased the tensile fracture stress but reduced the fracture strain and decreased water vapor permeability compared with control films. The films prepared represent an attractive alternative for being used as food packaging materials.

scholarly journals Preparation and Characterization of Edible Dialdehyde Carboxymethyl Cellulose Crosslinked Feather Keratin Films for Food Packaging

Polymers ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 158
Author(s):  
Yao Dou ◽  
Liguang Zhang ◽  
Buning Zhang ◽  
Ming He ◽  
Weimei Shi ◽  
...  
Keyword(s):  
Water Vapor ◽  
Carboxymethyl Cellulose ◽  
Food Packaging ◽  
Light Transmission ◽  
Value Added ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Edible Films ◽  
Vapor Permeability ◽  
Feather Keratin

The development of edible films based on the natural biopolymer feather keratin (FK) from poultry feathers is of great interest to food packaging. Edible dialdehyde carboxymethyl cellulose (DCMC) crosslinked FK films plasticized with glycerol were prepared by a casting method. The effect of DCMC crosslinking on the microstructure, light transmission, aggregate structure, tensile properties, water resistance and water vapor barrier were investigated. The results indicated the formation of both covalent and hydrogen bonding between FK and DCMC to form amorphous FK/DCMC films with good UV-barrier properties and transmittance. However, with increasing DCMC content, a decrease in tensile strength of the FK films indicated that plasticization, induced by hydrophilic properties of the DCMC, partly offset the crosslinking effect. Reduction in the moisture content, solubility and water vapor permeability indicated that DCMC crosslinking slightly reduced the moisture sensitivity of the FK films. Thus, DCMC crosslinking increased the potential viability of the FK films for food packaging applications, offering a value-added product.

scholarly journals Effect of chitosan addition in starch and poly(lactic acid) sheets produced by extrusion

2015 ◽  
Vol 6 (1) ◽  
pp. 80
Author(s):  
Matheus Luz Alberti ◽  
Sílvio José De Souza ◽  
Heliberto Gonçalves ◽  
Fabio Yamashita ◽  
Marianne Ayumi Shirai
Keyword(s):  
Lactic Acid ◽  
Water Vapor ◽  
Food Packaging ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Extrusion Process ◽  
Pilot Scale ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Water Vapor Barrier

<p>The use of blends containing biodegradable polymers like starch and poly (lactic acid) (PLA) has gained considerable attention, especially for the food packaging production. Current research has also highlighted the use of chitosan because their antimicrobial activity, biodegradability and applicability in the production of active biodegradable food packaging. The objective of this work was to produce cassava starch and PLA sheets incorporated with chitosan by flat extrusion process (calendering-extrusion), and evaluate the mechanical, water vapor barrier and microstructural properties. In order to simplify the obtainment of the material reducing processing steps, all components of the blend were homogenized in one step extrusion The incorporation of chitosan in the starch/PLA sheets decreased significantly the tensile strength, Young's modulus, elongation at break and density. In addition, the scanning electron microscopy images showed the formation of non-homogeneous mixtures with the presence of pores between the blend compounds, and this fact affected the water vapor barrier properties increasing water vapor permeability, solubility and diffusion coefficients. It was possible to conclude that although the incorporation of chitosan to the starch/PLA sheets has not contributed to obtain materials with suitable properties, it was able to produce them by calendering-extrusion process in pilot scale. Studies about chitosan incorporation in starch and PLA sheets still needed.</p><p>&nbsp;</p><p>DOI: 10.14685/rebrapa.v6i1.208</p><p>&nbsp;</p>

Physical and Barrier Properties of Polylactic Acid/Halloysite Nanotubes-Titanium Dioxide Nanocomposites

2021 ◽  
Vol 1021 ◽  
pp. 280-289
Author(s):  
Abdulkader M. Alakrach ◽  
Awad A. Al-Rashdi ◽  
Mohamed Khalid Al-Omar ◽  
Taha M. Jassam ◽  
Sam Sung Ting ◽  
...  
Keyword(s):  
Water Vapor ◽  
Food Packaging ◽  
Water Solubility ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Halloysite Nanotubes ◽  
Nanocomposite Films ◽  
Vapor Permeability ◽  
Water Contact ◽  
Film Density

In this study, PLA/TiO2 and PLA/HNTs-TiO2 nanocomposites films were fabricated via solution casting method. By testing the film density, solubility, water contact angle and water vapor permeability, the PLA nanocomposite films, the comprehensive performances of the nanocomposites were analysed. The outcomes demonstrated that maximum film density of PLA/TiO2 and PLA/HNTs-TiO2 nanocomposites films increased gradually with the increasing of nanofiller loadings. Moreover, the incorporation of TiO2 and HNTs-TiO2 significantly decreased the water vapor transmittance rate of the nanocomposite films with a slight priority to the addition of HNTs-TiO2, the water solubility was significantly improved with the addition of both nanofillers. Furthermore, the barrier properties were developed with the addition of both TiO2 and HNTs-TiO2 especially after the addition of low nanofiller loadings. Overall, the performance of the PLA/HNTs-TiO2 nanocomposite films was better than that PLA/TiO2 film. Nevertheless, both of the PLA nanocomposite samples achieved the requests of food packaging applications.

Physical Properties and Antimicrobial Activity of a Poly(Lactic Acid)/Poly(Trimethylene Carbonate) Film Incorporated with Thymol

2014 ◽  
Vol 884-885 ◽  
pp. 481-484 ◽  
Author(s):  
Yan Wu ◽  
Ming Wei Yuan ◽  
Ji Yi Yang ◽  
Yu Yue Qin ◽  
Ming Long Yuan ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Lactic Acid ◽  
Water Vapor ◽  
Composite Film ◽  
Food Packaging ◽  
Water Vapor Permeability ◽  
Antimicrobial Activities ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Trimethylene Carbonate

Thymol (TH), which has antimicrobial effect on many food pathogens, was incorporated as antimicrobial agent into composite poly (lactic acid)/poly (trimethylene carbonate)(PLA-PTMC) films. Antimicrobial active films based on PLA-PTMC were prepared by incorporating thymol at five different concentrations: 0, 3, 6, 9 and 12 %(w/w). The mechanical characterization, water vapor permeability (WVP), and antimicrobial activity of all formulations composite film were carried out. A decrease in elastic modulus was obtained for the active composite film compared with neat PLA-PTMC film. The presence of thymol decreased water vapor permeability, with a significant antimicrobial activity. Antimicrobial activities of films were tested against Escherichia coli, Staphylococcus aurous, Listeria, Bacillus subtilis, and Salmonella. Increasing amount of the thymol in the film caused a significant increase in inhibitory zones. These results suggest that thymol incorporated PLA-PTMC films have a prospectively potential in antimicrobial food packaging.

Preparation and Characterization of Corn Starch-Nanodiamond Composite Films

2013 ◽  
Vol 469 ◽  
pp. 156-161 ◽  
Author(s):  
Hong Pan ◽  
Dan Xu ◽  
Qin Liu ◽  
Hui Qing Ren ◽  
Min Zhou
Keyword(s):  
Water Vapor ◽  
Food Packaging ◽  
Corn Starch ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Nanocomposite Films ◽  
Vapor Permeability ◽  
Ft Ir ◽  
Loading Amount ◽  
Physical Blending

Starch-based nanocomposite films were fabricated by the incorporation of different amounts of nanodiamond (ND) particles. These films were characterized by SEM, FT-IR, TGA, tensile testing and water vapor permeability measurement. It was observed that at low loadings, ND dispersed well in starch matrix. However, as the loading amount increased, aggregates as large as several micrometers appeared. The physical blending of ND with starch didnt change the thermal degradation mechanisms of starch films, only increased the char residues. As the ND loading increased, the tensile strength of composite films increased but the elongation at break decreased. However, the water vapor permeability increased as the loading of ND increased due to the increased microspores in films. With further modifications, ND may be considered as a novel of biocompatible nanofillers for reinforcement of biopolymers for food packaging applications.

scholarly journals Arrowroot Starch-Based Films Incorporated With a Carnauba Wax Nanoemulsion, Cellulose Nanocrystals, and Essential Oils: a New Functional Material for Food Packaging Applications

2021 ◽  
Author(s):  
Josemar Gonçalves de Oliveira Filho ◽  
Beatriz Regina Albiero ◽  
Lavínia Cipriano ◽  
Carmen Cris de Oliveira Nobre Bezerra ◽  
Fernanda Campos Alencar Oldoni ◽  
...  
Keyword(s):  
Water Vapor ◽  
Essential Oils ◽  
Cellulose Nanocrystals ◽  
Food Packaging ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Mentha Spicata ◽  
Carnauba Wax ◽  
Active Food Packaging ◽  
Arrowroot Starch

Abstract Arrowroot starch (AA)-based films incorporated with a carnauba wax nanoemulsion (CWN), cellulose nanocrystals (CNCs), and essential oils (EOs) from Mentha spicata (MEO) and Cymbopogon martinii (CEO) were produced using the casting technique and then characterized in terms of their water barrier, tensile, thermal, optical, and microstructural properties and in vitro antifungal activity against Rhizopus stolonifer and Botrytis cinerea. Whereas the incorporation of CNCs decreased the moisture content and water vapor permeability of the AA/CWN/CNC film, the additional incorporation of either EO decreased the transparency and affected the microstructure of the AA/CWN/CNC/EO nanocomposites. MEO and CEO incorporation improved the thermal stability of the films and provided excellent protection against fruit-spoiling fungi. Because of their excellent barrier properties against fungal growth, water vapor permeability, and ultraviolet and visible light, these AA/CWN/CNC/EO films have promising potential for application as active food packaging or coating materials.

scholarly journals Physical Properties of Starch/Powdered Activated Carbon Composite Films

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4406
Author(s):  
Anita Kwaśniewska ◽  
Michał Świetlicki ◽  
Adam Prószyński ◽  
Grzegorz Gładyszewski
Keyword(s):  
Mechanical Properties ◽  
Activated Carbon ◽  
Water Vapor ◽  
Water Solubility ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Carbon Composite ◽  
Powdered Activated Carbon ◽  
Vapor Permeability

In the present study, starch/powdered activated carbon composite films were prepared by incorporating various amounts of powdered activated carbon (PAC)—1–5, 10, and 15 %—into a starch matrix, using the solvent casting method. The effect of PAC addition on the biopolymer film was investigated. The mechanical properties were examined by ultra-nanoindentation, nanoscratch, and micro-tensile tests. Since the mechanical properties of biopolymer films are correlated with their structure, the effect of PAC addition was tested using X-ray diffraction. The surface parameters morphology and wettability were analyzed by atomic force microscopy (AFM) and contact angle measurements. The barrier properties were examined by determining water vapor permeability and the water solubility index. The obtained results did not show a monotonic dependence of the mechanical parameters on PAC content, with the exception of the maximum strain, which decreased as the amount of the additive increased. The visible effect of PAC addition was manifested in changes in the adhesive force value and in water vapor permeability (WVP). The barrier properties decreased with the increase of the filler content.

scholarly journals Active Biodegradable Polyvinyl Alcohol–Hemicellulose/Tea Polyphenol Films with Excellent Moisture Resistance Prepared via Ultrasound Assistance for Food Packaging

Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 219
Author(s):  
Yining Wang ◽  
Jinhui Li ◽  
Xin Guo ◽  
Haisong Wang ◽  
Fang Qian ◽  
...  
Keyword(s):  
Water Vapor ◽  
High Performance ◽  
Food Packaging ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Poly Vinyl Alcohol ◽  
Vapor Permeability ◽  
Moisture Resistance ◽  
Film Material ◽  
Strength Performance

Poor water-vapor barriers and mechanical properties are common problems of biobased films. To maintain food quality, the barrier and its strength performance need to be improved. Tea polyphenols (TP) are a natural active substance, and their benzene ring structure provides a barrier for them as a film material. Films that incorporate TP also have enriched functionalities, e.g., as antioxidants. Here, active poly (vinyl alcohol) (PVA)-hemicellulose (HC)/TP films with good moisture resistance and antioxidant capacity were prepared via ultrasound assistance. The effects of TP incorporation and ultrasonication on the physical, antioxidant, and micromorphological properties of the films were investigated. Results showed that the addition of TP improved the thermal stability and water-vapor permeability (WVP) of the composite films. When a PVA-HC/TP composite film with a PVA-HC to TP mass ratio of 100:10 was treated with ultrasonication for 45 min, tensile strength was 25.61 Mpa, which was increased by 54% from the film without any treatment, and water-vapor permeability (WVP) value declined from 49% to 4.29 × 10−12 g·cm/cm2·s·Pa. More importantly, the films’ DPPH scavenging activity increased to the maximal levels of 85.45%. In short, these observations create a feasible strategy for preparing high-performance biodegradable active-packaging films.

Research on Preparation and Properties of Edible Composite Protein Films

2011 ◽  
Vol 87 ◽  
pp. 213-222 ◽  
Author(s):  
Gui Yun Chen ◽  
Qiao Lei
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Water Solubility ◽  
Water Vapor Permeability ◽  
Sodium Caseinate ◽  
Barrier Properties ◽  
Edible Films ◽  
Protein Isolate ◽  
Vapor Permeability ◽  
Protein Films

Edible films based on whey protein isolate and sodium caseinate were prepared by uniform design method. Glycerol has been incorporated into the edible films as a plasticizer. For all types of films, the influences of components and forming temperature on film properties, such as mechanical properties, water solubility, optical properties, gas and water vapor permeability were investigated. The results suggested that glycerol was the most important factor influencing all the properties of edible composite protein films. However, both increases of sodium caseinate concentration and glycerol content contributed to decrease the barrier properties of gas and water vapor. Among the films studied, group D (prepared with 5% whey protein isolate, 2% sodium caseinate, 50% glycerol at the temperature of 50 °C) showed moderate mechanical properties, optical properties, water solubility and maximum barrier properties of gas and water vapor, with tensile strength=5.85MPa, elongation=101.20%, transparency=91.4%, gas permeability rate=49.92cm3m-2d-10.1MPa-1and water vapor permeability of 0.128×10-11g m-1s-1Pa-1, 0.260×10-11g m-1s-1Pa-1, 0.513×10-11g m-1s-1Pa-1, 1.252×10-11g m-1s-1Pa-1at the RH gradient of 10-40%, 10-50%, 10-60%, 10-70%, respectively.

Sign in / Sign up

Export Citation Format

Share Document