scholarly journals Nonlinear Hydroelastic Waves Generated due to a Floating Elastic Plate in a Current

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Ping Wang ◽  
Yongyan Wang ◽  
Chuanqi Su ◽  
Yanzhao Yang

Effects of underlying uniform current on the nonlinear hydroelastic waves generated due to an infinite floating plate are studied analytically, under the hypotheses that the fluid is homogeneous, incompressible, and inviscid. For the case of irrotational motion, the Laplace equation is the governing equation, with the boundary conditions expressing a balance among the hydrodynamics, the uniform current, and elastic force. It is found that the convergent series solutions, obtained by the homotopy analysis method (HAM), consist of the nonlinear hydroelastic wave profile and the velocity potential. The impacts of important physical parameters are discussed in detail. With the increment of the following current intensity, we find that the amplitudes of the hydroelastic waves decrease very slightly, while the opposing current produces the opposite effect on the hydroelastic waves. Furthermore, the amplitudes of waves increase very obviously for higher opposing current speed but reduce very slightly for higher following current speed. A larger amplitude of the incident wave increases the hydroelastic wave deflections for both opposing and following current, while for Young’s modulus of the plate there is the opposite effect.

2015 ◽  
Vol 10 (3) ◽  
pp. 2825-2833
Author(s):  
Achala Nargund ◽  
R Madhusudhan ◽  
S B Sathyanarayana

In this paper, Homotopy analysis method is applied to the nonlinear coupleddifferential equations of classical Boussinesq system. We have applied Homotopy analysis method (HAM) for the application problems in [1, 2, 3, 4]. We have also plotted Domb-Sykes plot for the region of convergence. We have applied Pade for the HAM series to identify the singularity and reflect it in the graph. The HAM is a analytical technique which is used to solve non-linear problems to generate a convergent series. HAM gives complete freedom to choose the initial approximation of the solution, it is the auxiliary parameter h which gives us a convenient way to guarantee the convergence of homotopy series solution. It seems that moreartificial degrees of freedom implies larger possibility to gain better approximations by HAM.


2013 ◽  
Vol 431 ◽  
pp. 198-201
Author(s):  
Jing Zhu ◽  
Lian Cun Zheng

This paper presents a theoretical analysis for the incompressible MHD stagnation-point flows of a Non-Newtonian Fluid over stretching sheets.The governing system of partial differential equations is first transformed into a system of dimensionless ordinary differential equations. By using the homotopy analysis method, a convergent series solution is obtained. The reliability and efficiency of series solutions are illustrated by good agreement with numerical results in the literature.Besides, the effects of the power-law indexthe magnetic field parameter and velocity ratio parameter on the flow are investigated.


2019 ◽  
Vol 2019 (1) ◽  
Author(s):  
Mehmet Şenol ◽  
Olaniyi S. Iyiola ◽  
Hamed Daei Kasmaei ◽  
Lanre Akinyemi

Abstract In this paper, we present analytical-approximate solution to the time-fractional nonlinear coupled Jaulent–Miodek system of equations which comes with an energy-dependent Schrödinger potential by means of a residual power series method (RSPM) and a q-homotopy analysis method (q-HAM). These methods produce convergent series solutions with easily computable components. Using a specific example, a comparison analysis is done between these methods and the exact solution. The numerical results show that present methods are competitive, powerful, reliable, and easy to implement for strongly nonlinear fractional differential equations.


2013 ◽  
Vol 2013 ◽  
pp. 1-12 ◽  
Author(s):  
Shahid S. Siddiqi ◽  
Muzammal Iftikhar

The aim of this paper is to use the homotopy analysis method (HAM), an approximating technique for solving linear and nonlinear higher order boundary value problems. Using HAM, approximate solutions of seventh-, eighth-, and tenth-order boundary value problems are developed. This approach provides the solution in terms of a convergent series. Approximate results are given for several examples to illustrate the implementation and accuracy of the method. The results obtained from this method are compared with the exact solutions and other methods (Akram and Rehman (2013), Farajeyan and Maleki (2012), Geng and Li (2009), Golbabai and Javidi (2007), He (2007), Inc and Evans (2004), Lamnii et al. (2008), Siddiqi and Akram (2007), Siddiqi et al. (2012), Siddiqi et al. (2009), Siddiqi and Iftikhar (2013), Siddiqi and Twizell (1996), Siddiqi and Twizell (1998), Torvattanabun and Koonprasert (2010), and Kasi Viswanadham and Raju (2012)) revealing that the present method is more accurate.


2010 ◽  
Vol 88 (12) ◽  
pp. 911-917 ◽  
Author(s):  
T. Hayat ◽  
M. Nawaz ◽  
S. Asghar ◽  
Awatif A. Hendi

This study explores the flow of a second-grade fluid in divergent–convergent channel. The problem formulation is first developed, and then the corresponding nonlinear problem is solved by homotopy analysis method (HAM). The effects of different physical parameters on the velocity profile are shown. The numerical values of the skin friction coefficient for different values of parameters are tabulated.


2012 ◽  
Vol 67 (5) ◽  
pp. 230-238 ◽  
Author(s):  
Chen Xuan ◽  
Cheng Peng ◽  
Yongzhong Huo

The homotopy analysis method (HAM) is applied to solve a nonlinear ordinary differential equation describing certain phase transition problem in solids. Both bifurcation conditions and analytical solutions are obtained simultaneously for the Euler-Lagrange equation of the martensitic transformation. HAM is capable of providing an analytical expression for the bifurcation condition to judge the occurrence of the phase transition, while other numerical techniques have difficulties in bifurcation analysis. The convergence of the analytical solutions on the one hand can be adjusted by the auxiliary parameter and on the other hand is always obtainable for all relevant physical parameters satisfying the bifurcation condition.


Entropy ◽  
2020 ◽  
Vol 22 (10) ◽  
pp. 1171
Author(s):  
Umair Rashid ◽  
Dumitru Baleanu ◽  
Azhar Iqbal ◽  
Muhammd Abbas

Magnetohydrodynamic nanofluid technologies are emerging in several areas including pharmacology, medicine and lubrication (smart tribology). The present study discusses the heat transfer and entropy generation of magnetohydrodynamic (MHD) Ag-water nanofluid flow over a stretching sheet with the effect of nanoparticles shape. Three different geometries of nanoparticles—sphere, blade and lamina—are considered. The problem is modeled in the form of momentum, energy and entropy equations. The homotopy analysis method (HAM) is used to find the analytical solution of momentum, energy and entropy equations. The variations of velocity profile, temperature profile, Nusselt number and entropy generation with the influences of physical parameters are discussed in graphical form. The results show that the performance of lamina-shaped nanoparticles is better in temperature distribution, heat transfer and enhancement of the entropy generation.


2011 ◽  
Vol 2011 ◽  
pp. 1-12 ◽  
Author(s):  
Hadi Hosseini Fadravi ◽  
Hassan Saberi Nik ◽  
Reza Buzhabadi

The analytical solution of the foam drainage equation with time- and space-fractional derivatives was derived by means of the homotopy analysis method (HAM). The fractional derivatives are described in the Caputo sense. Some examples are given and comparisons are made; the comparisons show that the homotopy analysis method is very effective and convenient. By choosing different values of the parameters in general formal numerical solutions, as a result, a very rapidly convergent series solution is obtained.


2012 ◽  
Vol 2012 ◽  
pp. 1-18 ◽  
Author(s):  
Ahmad El-Ajou ◽  
Omar Abu Arqub ◽  
Shaher Momani

In this paper, series solution of second-order integrodifferential equations with boundary conditions of the Fredholm and Volterra types by means of the homotopy analysis method is considered. The new approach provides the solution in the form of a rapidly convergent series with easily computable components using symbolic computation software. The homotopy analysis method provides us with a simple way to adjust and control the convergence region of the infinite series solution by introducing an auxiliary parameter. The proposed technique is applied to a few test examples to illustrate the accuracy, efficiency, and applicability of the method. The results reveal that the method is very effective, straightforward, and simple.


Author(s):  
S. O. Ajibola ◽  
A. S. Oke ◽  
W. N. Mutuku

Fractional calculus has been found to be a great asset in finding fractional dimension in chaos theory, in viscoelasticity diffusion, in random optimal search etc. Various techniques have been proposed to solve differential equations of fractional order. In this paper, the Laplace-Homotopy Analysis Method (LHAM) is applied to obtain approximate analytic solutions of the nonlinear Rosenau-Hyman Korteweg-de Vries (KdV), K(2, 2), and Burgers' equations of fractional order with initial conditions. The solutions of these equations are calculated in the form of convergent series. The solutions obtained converge to the exact solution when α = 1, showing the reliability of LHAM.


Sign in / Sign up

Export Citation Format

Share Document