scholarly journals Seismic Performance of High-Ductile Fiber-Reinforced Concrete Short Columns

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Mingke Deng ◽  
Yangxi Zhang
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Seismic Performance ◽  
Seismic Behavior ◽  
Fiber Reinforced Concrete ◽  
Test Results ◽  
Fiber Reinforced ◽  
Short Column ◽  
Short Columns

This study mainly aims to investigate the effectiveness of high-ductile fiber-reinforced concrete (HDC) as a means to enhance the seismic performance of short columns. Six HDC short columns and one reinforced concrete (RC) short column were designed and tested under lateral cyclic loading. The influence of the material type (concrete or HDC), axial load, stirrup ratio, and shear span ratio on crack patterns, hysteresis behavior, shear strength, deformation capacity, energy dissipation, and stiffness degradation was presented and discussed, respectively. The test results show that the RC short column failed in brittle shear with poor energy dissipation, while using HDC to replace concrete can effectively improve the seismic behavior of the short columns. Compared with the RC short column, the shear strength of HDC specimens was improved by 12.6–30.2%, and the drift ratio and the energy dissipation increases were 56.9–88.5% and 237.7–336.7%, respectively, at the ultimate displacement. Additionally, the prediction model of the shear strength for RC columns based on GB50010-2010 (Chinese code) can be safely adopted to evaluate the shear strength of HDC short columns.

Seismic Rehabilitation of Beam-Column Joints Using FRP Sheets and Buckling Restrained Braces

2013 ◽  
Vol 479-480 ◽  
pp. 1170-1174
Author(s):  
Hee Cheul Kim ◽  
Dae Jin Kim ◽  
Min Sook Kim ◽  
Young Hak Lee
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Seismic Performance ◽  
Reinforced Concrete Structures ◽  
Test Results ◽  
Seismic Rehabilitation ◽  
Buckling Restrained Braces ◽  
Column Joint ◽  
Energy Dissipation Capacity

The purpose of this study was to evaluate seismic performance of rehabilitated beam-column joint using FRP sheets and Buckling Restrained Braces (BRBs) and provide test data related to rehabilitated beam-column joints in reinforced concrete structures. The seismic performance of total six beam-column specimens is evaluated under cyclic loadings in terms of shear strength, effective stiffness, energy dissipation and ductility. The test results showed wrapping FRP sheets can contribute to increase the effect of confinement and the crack delay. Also retrofitting buckling restrained braces (BRBs) can improve the stiffness and energy dissipation capacity. Both FRP sheets and BRBs can effectively improve the strength, stiffness and ductility of seismically deficient beam-column joints.

On axial compressive behavior of steel fiber reinforced concrete confined by FRP

2021 ◽  
pp. 136943322098165
Author(s):  
Hossein Saberi ◽  
Farzad Hatami ◽  
Alireza Rahai
Keyword(s):  
Reinforced Concrete ◽  
Experimental Test ◽  
Steel Fiber ◽  
Experimental Tests ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Test Results ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Frp Confinement

In this study, the co-effects of steel fibers and FRP confinement on the concrete behavior under the axial compression load are investigated. Thus, the experimental tests were conducted on 18 steel fiber-reinforced concrete (SFRC) specimens confined by FRP. Moreover, 24 existing experimental test results of FRP-confined specimens tested under axial compression are gathered to compile a reliable database for developing a mathematical model. In the conducted experimental tests, the concrete strength was varied as 26 MPa and 32.5 MPa and the steel fiber content was varied as 0.0%, 1.5%, and 3%. The specimens were confined with one and two layers of glass fiber reinforced polymer (GFRP) sheet. The experimental test results show that simultaneously using the steel fibers and FRP confinement in concrete not only significantly increases the peak strength and ultimate strain of concrete but also solves the issue of sudden failure in the FRP-confined concrete. The simulations confirm that the results of the proposed model are in good agreement with those of experimental tests.

Shear strength of reinforced concrete beams with a fiber concrete matrix

2006 ◽  
Vol 33 (6) ◽  
pp. 726-734 ◽  
Author(s):  
Fariborz Majdzadeh ◽  
Sayed Mohamad Soleimani ◽  
Nemkumar Banthia
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Fiber Reinforcement ◽  
Shear Capacity ◽  
Fiber Reinforced Concrete ◽  
Rc Beams ◽  
Fiber Reinforced ◽  
Fiber Volume

The purpose of this study was to investigate the influence of fiber reinforcement on the shear capacity of reinforced concrete (RC) beams. Both steel and synthetic fibers at variable volume fractions were investigated. Two series of tests were performed: structural tests, where RC beams were tested to failure under an applied four-point load; and materials tests, where companion fiber-reinforced concrete (FRC) prisms were tested under direct shear to obtain material properties such as shear strength and shear toughness. FRC test results indicated an almost linear increase in the shear strength of concrete with an increase in the fiber volume fraction. Fiber reinforcement enhanced the shear load capacity and shear deformation capacity of RC beams, but 1% fiber volume fraction was seen as optimal; no benefits were noted when the fiber volume fraction was increased beyond 1%. Finally, an equation is proposed to predict the shear capacity of RC beams.Key words: shear strength, fiber-reinforced concrete, RC beam, stirrups, energy absorption capacity, steel fiber, synthetic fiber.

scholarly journals Application of fiber-reinforced concrete lining for fault-crossing tunnels in meizoseismal area to improving seismic performance

2020 ◽  
Vol 12 (7) ◽  
pp. 168781402094402
Author(s):  
Dong An ◽  
Zheng Chen ◽  
Linghan Meng ◽  
Guangyao Cui
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
Steel Fiber ◽  
Tunnel Lining ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Hybrid Fiber ◽  
Meizoseismal Area ◽  
Secondary Lining

The fault-crossing tunnel in meizoseismal area is directly subjected to strong ground motion, which leads to the failure of the tunnel lining. In order to improve the seismic safety of tunnel, fiber-reinforced concrete is applied to tunnel lining in this article. Taking the section of Zhongyi tunnel crossing Wanlong fault as an example, seismic performance of fiber-reinforced concrete tunnel lining was studied by finite difference numerical calculation software FLAC3D. The seismic displacement, stress response, and side wall convergence of secondary lining structures which are plain concrete, steel fiber-reinforced concrete, and steel-basalt hybrid fiber-reinforced concrete were comparatively analyzed. Moreover, the safety factor of each lining structure was investigated with the present numerical model. With the obtained data, seismic performance of steel-basalt hybrid fiber-reinforced concrete secondary lining is better than that of steel fiber-reinforced concrete secondary lining. The results may provide references for seismic design of fault-crossing tunnels in meizoseismal area.

Sign in / Sign up

Export Citation Format

Share Document