scholarly journals Temperature Adaptability of Asphalt Pavement to High Temperatures and Significant Temperature Differences

2018 ◽  
Vol 2018 ◽  
pp. 1-16
Author(s):  
Xueying Zhao ◽  
Aiqin Shen ◽  
Baofu Ma
Keyword(s):  
Asphalt Pavement ◽  
Maximum Shear Stress ◽  
Structure Design ◽  
Temperature Fields ◽  
Asphalt Pavements ◽  
Fe Model ◽  
Tire Pressure ◽  
Significant Temperature ◽  
Pavement Structure ◽  
Temperature Adaptability

Temperature adaptability of asphalt pavements is very important, due to their potential influence on pavement structure design, particularly in areas that experience significant temperature differences. In this paper, a finite element (FE) model was developed, and Turpan-Xiaocao Lake Highway in southern Xinjiang was taken as a case study engineering, which tends to experience this adverse environmental condition (temperature difference: 25.5°C; July 14, 2008). In this model, the generalized Kelvin model and the Burgers model were used. The time-dependent tire pressure was considered. To guide pavement structure design and control pavement distresses in this area, seven alternative pavement structures were selected to simulate and analyze pavement temperature fields and the mechanical responses. It was observed that the influence of air temperature had the greatest impact on Str-1, possibly due to the thinnest asphalt course. Moreover, when rutting depth, maximum shear stress of the asphalt course, deflection on the pavement surface, and compressive strains at the subgrade top surface were taken as the evaluation indices, the adaptability of asphalt pavements using compound base courses had obvious advantage due to their strong absorption and reflection of load impact. The adaptability of seven structures analyzed in this paper decreased in the following order: Str-5 > Str-6 > Str-4 > Str-2 > Str-m > Str-1 > Str-3. In addition, it broke the traditional view that asphalt pavement with a flexible base had the poor ability on rutting resistance. Besides, it also suggests that when the thickness of asphalt courses was equivalent, increasing the thickness of chemical-treated base courses would help with the deformation resistance, and vice versa.

scholarly journals High-Temperature Rutting Resistance of Inverted Asphalt Pavement Structure

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Yingjun Jiang ◽  
Yu Zhang ◽  
Changqing Deng ◽  
Yong Yi ◽  
Tian Tian ◽  
...  
Keyword(s):  
High Temperature ◽  
Asphalt Pavement ◽  
Maximum Shear Stress ◽  
Prediction Equation ◽  
Structure Design ◽  
Asphalt Pavements ◽  
Engineering Practice ◽  
Wheel Load ◽  
Rutting Resistance ◽  
Pavement Structure

To improve the high-temperature rutting resistance of asphalt pavements, an inverted asphalt pavement structure (IAPS), 4 cm AC-13 mixture + 8 cm AC-25 mixture + 6 cm AC-20 mixture + 54 cm cement-stabilized macadam, was proposed herein by considering engineering practice, theoretical calculation, and analysis. A rutting prediction equation of asphalt pavements was then proposed via rut-development trends found by laboratory 18 cm thick rutting test. Subsequently, the rutting resistance of the IAPS was evaluated. The results show that, compared with the traditional asphalt pavement structure (TAPS), 4 cm AC-13 mixture + 6 cm AC-20 mixture + 8 cm AC-25 mixture + 54 cm cement-stabilized macadam, the maximum shear stress of the IAPS can be reduced by ∼1.7% along with improvements in rutting resistance by ∼16% and ∼12% under wheel loads of 0.7 and 1.2 MPa, respectively. Wheel-load increase affects the rutting resistance of both structures in a similar manner: when the wheel load increases from 0.7 MPa to 1.2 MPa, the rut depths of both pavement structures increase by at least 63%. The IAPS clearly has better rutting resistance than the TAPS and is thus the better choice for asphalt pavement structure design.

scholarly journals Long-Term Performance of Pavement Structures with Cold In-Place Recycled Base Course

2021 ◽  
Vol 16 (2) ◽  
pp. 48-65
Author(s):  
Audrius Vaitkus ◽  
Judita Gražulytė ◽  
Andrius Baltrušaitis ◽  
Jurgita Židanavičiūtė ◽  
Donatas Čygas
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Asphalt Pavements ◽  
Recycled Asphalt ◽  
Binding Agents ◽  
Pavement Structure ◽  
Pavement Structures ◽  
Base Course ◽  
Surface Distress ◽  
Foamed Bitumen

Properly designed and maintained asphalt pavements operate for ten to twenty-five years and have to be rehabilitated after that period. Cold in-place recycling has priority over all other rehabilitation methods since it is done without preheating and transportation of reclaimed asphalt pavement. Multiple researches on the performance of cold recycled mixtures have been done; however, it is unclear how the entire pavement structure (cold recycled asphalt pavement overlaid with asphalt mixture) performs depending on binding agents. The main objective of this research was to evaluate the performance of cold in-place recycled asphalt pavements considering binding agents (foamed bitumen in combination with cement or only cement) and figure out which binder leads to the best pavement performance. Three road sections rehabilitated in 2000, 2003, and 2005 were analysed. The performance of the entire pavement structure was evaluated in terms of the International Roughness Index, rut depth, and pavement surface distress in 2013 and 2017.

scholarly journals Effect of a dual tire pressure on the design parameters of thick asphalt pavements using finite element freeware

DYNA ◽  
2016 ◽  
Vol 83 (196) ◽  
pp. 194-203
Author(s):  
Myriam Rocío Pallares Muñoz ◽  
Julián Andrés Pulecio-Díaz
Keyword(s):  
Finite Element ◽  
Analytical Methods ◽  
Asphalt Pavement ◽  
Field Tests ◽  
Asphalt Pavements ◽  
Design Parameters ◽  
Future Research ◽  
Tire Pressure ◽  
The Cost ◽  
Cost Of Construction

<p>The effect of a dual tire pressure on the design parameters of thick asphalt pavements using finite element freeware EverStressFE©1.0 is evaluated. This is trying to represent more adjusted the footprint shape and intensity of stress generated by the tires of vehicles. To validate the elastic multilayer EverStress©5.0 software was used. The results of the deformations can be concluded that the asphalt pavement designs made with analytical methods may be slightly oversized and consequently increase the cost of construction of pavements. This study marks a route to analyze the sensitivity of various factors that may affect the design of asphalt pavements. Future research is expected to integrate dynamic conditions by introducing results of field tests to full scale.</p>

Analysis of Performance Decay Behavior for Asphalt Pavement Based on Aging

2013 ◽  
Vol 723 ◽  
pp. 22-26 ◽  
Author(s):  
Pei Long Li ◽  
Zhan Ding ◽  
Zheng Qi Zhang
Keyword(s):  
Shear Stress ◽  
Service Life ◽  
Tensile Stress ◽  
Simulation Analysis ◽  
Asphalt Pavement ◽  
Maximum Shear Stress ◽  
Maximum Tensile Stress ◽  
Pavement Structure ◽  
Analysis Of Performance ◽  
Decay Behavior

Aging is a main factor affecting the durability of asphalt pavement. To study decay behavior of asphalt pavement with aging, aged asphalt was extracted from stratified pavement mixtures for different service-life. The changes of asphalt properties with service time and depth variations of the pavement were discussed. And numerical simulation analysis of pavement structure was conducted with pavement gradient modulus changes caused by aging. The results indicate that asphalt stiffness increases and low-temperature performance decays sharply with the extension of pavement service life, especially in the first several years. The vertical aging differences from top to bottom of pavement were significant, the aging extents decrease continuously from the surface, which cause the gradient changes of pavement modulus. The maximum tensile stress and maximum shear stress all increase with surface modulus increasing, so more serious aging can induce greater gradient modulus, shear stress and tensile stress are larger under the same loads, which have more serious damage to the pavement structure.

scholarly journals Unified Strength Model of Asphalt Mixture under Various Loading Modes

Materials ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 889 ◽  
Author(s):  
Chengdong Xia ◽  
Songtao Lv ◽  
Lingyun You ◽  
Dong Chen ◽  
Yipeng Li ◽  
...  
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Structure Design ◽  
Strength Model ◽  
Compression Tests ◽  
Unconfined Compression ◽  
Direct Tension ◽  
Indirect Tension ◽  
Pavement Structure ◽  
Loading Modes

Although the rutting resistance, fatigue cracking, and the resistance to water and frost are important for the asphalt pavement, the strength of asphalt mixture is also an important factor for the asphalt mixture design. The strength of asphalt mixture is directly associated with the overall performance of asphalt mixture. As a top layer material of asphalt pavement, the strength of asphalt mixture plays an indispensable role in the top structural bearing layer. In the present design system, the strength of asphalt pavement is usually achieved via the laboratory tests. The stress states are usually different for the different laboratory approaches. Even at the same stress level, the laboratory strengths of asphalt mixture obtained are significantly different, which leads to misunderstanding of the asphalt mixtures used in asphalt pavement structure design. The arbitrariness of strength determinations affects the effectiveness of the asphalt pavement structure design in civil engineering. Therefore, in order to overcome the design deviation caused by the randomness of the laboratory strength of asphalt mixtures, in this study, the direct tension, indirect tension, and unconfined compression tests were implemented on the specimens under different loading rates. The strength model of asphalt mixture under different loading modes was established. The relationship between the strength ratio and loading rate of direct tension, indirect tension, and unconfined compression tests was adopted separately. Then, one unified strength model of asphalt mixture with different loading modes was established. The preliminary results show that the proposed unified strength model could be applied to improve the accurate degree of laboratory strength. The effectiveness of laboratory-based asphalt pavement structure design can therefore be promoted.

Mechanism Analysis of Rutting at Urban Intersections Based on Numerical Simulation of Moving Loads

2010 ◽  
Vol 152-153 ◽  
pp. 1192-1198 ◽  
Author(s):  
Ze Jiao Dong ◽  
Zong Jie Sun ◽  
Xiang Bing Gong ◽  
Hao Liu
Keyword(s):  
Finite Element ◽  
Shear Stress ◽  
Asphalt Pavement ◽  
Moving Load ◽  
Maximum Shear Stress ◽  
Uniform Motion ◽  
Dynamic Mode ◽  
Mechanism Analysis ◽  
Horizontal Shear ◽  
Pavement Structure

Frequent starting and braking of vehicles causes rutting of asphalt pavement at urban intersection. As a result, dynamic response of pavement subjected to these kinds of vehicle loadings can be used to analyze rutting mechanism. At first, vehicle loading at urban intersection was described by a vertical and horizontal combined moving pressure with variable speeds. Then, three-dimensional finite element model in transient dynamic mode is developed based on the practical pavement structure. And the moving load, boundary conditions and material parameters were briefly introduced. Finally, through the comparison of time histories and spatial distribution among accelerating, decelerating and uniform motion, mechanism of rutting of asphalt pavement at urban intersections was illustrated according to the finite element simulation. It shows that frequent starting and braking of vehicle at urban intersections, obviously change the stress distribution within pavement structure compared with uniform motion case. The distribution and amplitude of maximum shear stress and horizontal shear stress was observed during the passage of the loading, which will result in shear flow deformation. Pavement structure subjected to moving load exhibits an alternative characteristic which will accelerate the rutting damage of pavement.

Sponge roads: the permeable asphalt pavement structures based on rainfall characteristics in central plains urban agglomeration of China

2019 ◽  
Vol 80 (9) ◽  
pp. 1740-1750 ◽  
Author(s):  
Xiaodong Guo ◽  
Jiupeng Zhang ◽  
Bochao Zhou ◽  
Wolong Liu ◽  
Jianzhong Pei ◽  
...  
Keyword(s):  
Surface Layer ◽  
Bearing Capacity ◽  
Asphalt Pavement ◽  
Structure Design ◽  
Urban Agglomeration ◽  
Central Plains ◽  
Rainfall Characteristics ◽  
Combination Scheme ◽  
Pavement Structure ◽  
Pavement Structures

Abstract Permeable asphalt pavement should be selected according to the rainfall characteristics of the project site, so as to improve the permeable performance and ensure the bearing capacity of the pavement structure. Therefore, taking a city in the central plains urban agglomeration of China as an example, the characteristics of the rainstorm intensity distribution and cumulative rainfall are analyzed, and a combination scheme of drainage surface layer asphalt pavement suitable for rainfall characteristics in this area is proposed. Then, the pavement structure design is systematically carried out based on the permeable capacity and bearing capacity. The results show that under the rainfall conditions in this area, there is no surface runoff on the permeable asphalt pavement with 120 mm drainage surface layer, which is suitable for the medium traffic grade of urban roads with cumulative equivalent axle loads of 10 million to 12 million times.

Performance of Permeable Asphalt Pavement during Rainfall Infiltration

2011 ◽  
Vol 90-93 ◽  
pp. 774-777
Author(s):  
Xiao Lan Huang ◽  
Jun Xiong
Keyword(s):  
Asphalt Pavement ◽  
Structural Characteristics ◽  
Calculation Model ◽  
Structure Design ◽  
Concrete Pavement ◽  
Water Level Fluctuations ◽  
Asphalt Pavements ◽  
Simulation Results ◽  
The Difference ◽  
Bituminous Concrete

The purpose of this paper is to summarize the performance of permeable asphalt pavements (PAP) and to recommend future areas of research and development. The development of PAP as an integral part of sustainable drainage systems is reviewed in the context of traditional and modern urban drainage. The difference between the permeable asphalt pavement and the ordinary bituminous concrete pavement is discussed. A description of the seepage calculation model based on the structural characteristics of PAP is presented. And also water level fluctuations of both the water permeable asphalt pavement and the ordinary bituminous concrete pavement are analyzed by comparing their numerical simulation results. Finally the drainage performance of the water permeable asphalt pavement is demonstrated. The long-term effectiveness of permeable pavement as an alternative to traditional impervious asphalt pavement is examined. The simulation results could provide significant guidance for the structure design of water permeable asphalt pavement.

Research on Anti-Rutting Performance of High Modulus Asphalt Concrete Pavement

2010 ◽  
Vol 163-167 ◽  
pp. 4474-4477 ◽  
Author(s):  
Wei Ouyang ◽  
Guo Feng Yu ◽  
Fang Fang Zhu
Keyword(s):  
Dynamic Stability ◽  
Asphalt Concrete ◽  
Asphalt Pavement ◽  
Maximum Shear Stress ◽  
Middle Layer ◽  
High Modulus ◽  
Mechanical Calculation ◽  
Result Show ◽  
Pavement Structure ◽  
Asphalt Concrete Pavement

The new ways of anti-rutting was put forward by improving modulus of asphalt concrete and the effect of HMAT(high modulus asphalt concrete) on rutting is studied in view of mechanics; The cause of asphalt pavement track is closely related to pavement structure under load. Starting from the mechanism of rutting, the mechanical property of HMAT and the effect of modulus in middle layer on the rutting were analyzed; the dynamic stability and modulus of HMAC were analyzed by text and the result show that Increase of the dynamic stability and modulus of HMAC went against rutting; The mechanism of pavement structure was analyzed by the numerical analysis show that the maximum shear stress occurred in middle layer of pavement structure according to mechanical calculation. HMAC can raise modulus of elasticity of middle layer. HMAC can also improve stress state of pavement structure, reduce shear strain and prevent asphalt pavement track.

AC-25 Asphalt Mixture Dynamic Stability Criteria

2013 ◽  
Vol 718-720 ◽  
pp. 1855-1860
Author(s):  
Chuang Min Li ◽  
An Liu ◽  
Yun Chen
Keyword(s):  
Dynamic Stability ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Structure Design ◽  
Specimen Thickness ◽  
Stability Criteria ◽  
High Temperature Stability ◽  
Highway Engineering ◽  
Technical Specifications ◽  
Pavement Structure

With the publication of Standard test methods of bitumen and bituminous mixtures for highway engineering " in 2011, the common asphalt mixture rutting test can be carried out in accordance with the T0719-2011 in China. But in our country, the current " Technical specifications for construction of highway engineering asphalt pavement " published in 2004 describes that the nominal maximum size of more than 19mm dense-graded asphalt concrete or asphalt treated permeable base is not suitable for carrying out specimens rutting test in accordance with the size of 300mm× 300mm ×50mm, so there is no corresponding dynamic stability requirements to the commonly used AC-25 type asphalt mixture in pavement layer in China. Combined with the Dao-He expressway pavement structure design and used the T0719-2011 method of AC-25 type different thickness rutting test, the relationship between the rutting specimen thickness and the dynamic stability is established. With reference to the requirements of asphalt pavement construction specifications and pavement structure layer on high temperature stability, the 8cm thick AC-25 common asphalt mixture dynamic stability criteria is put forward. Analyzing on AC-25 with No. 50 pure asphalt mixture dynamic stability test data, the dynamic stability requirements is put forward as validation for AC-25 asphalt mixture dynamic stability criteria in Dao-He expressway.

Sign in / Sign up

Export Citation Format

Share Document