scholarly journals Removal of Zn (II) and Cu (II) Ions from Industrial Wastewaters Using Magnetic Biochar Derived from Water Hyacinth

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Benias C. Nyamunda ◽  
Terrence Chivhanga ◽  
Upenyu Guyo ◽  
Fidelis Chigondo
Keyword(s):  
Water Hyacinth ◽  
Contact Time ◽  
Metal Ion ◽  
Adsorption Process ◽  
Kinetic Studies ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Magnetic Biochar ◽  
Metal Ion Removal ◽  
High Sorption

This study evaluates the effectiveness of magnetic biochar (Fe2O3-EC) derived from water hyacinth in the removal of Cu+2 and Zn+2 from aqueous solution. Fe2O3-EC was prepared by chemical coprecipitation of a mixture of FeCl2 and FeCl3 on water hyacinth biomass followed by pyrolysis. The adsorbent was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDX). Batch adsorption studies on the effects of temperature, biosorbent dosage, contact time, and initial metal ion concentration were carried out. Fe2O3-EC exhibited optimum contact time, biosorbent dosage, and pH values of 65 min, 1.2 g, and 6, respectively. Fe2O3-EC exhibited strong magnetic separation ability and high sorption capability. Metal ion adsorption onto the biochar conformed to the Langmuir isotherm. Kinetic studies revealed that the adsorption process followed pseudo-second-order model. The calculated thermodynamic parameters showed that the adsorption process was feasible and exothermic in nature. These results have demonstrated that the use of Fe2O3-EC in metal ion removal could provide an alternative way to manage and utilize this highly problematic invasive species.

scholarly journals Adsorption of PB(II) Ions from Aqueous Solution Using Functionalized and Carbonized Groundnut Shell

2019 ◽  
pp. 1-11
Author(s):  
Ikemefuna Usifoh ◽  
Rosemary Odinigwe ◽  
M. U. Obidiegwu
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Metal Ion ◽  
Ion Concentration ◽  
Lead Ion ◽  
Batch Adsorption ◽  
Adsorbent Dosage ◽  
Metal Ion Removal ◽  
Increase With Increase ◽  
Groundnut Shell

Groundnut shells were modified through functionalization and carbonization processes to produce three distinct adsorbents for adsorption of Pb (II) ions from aqueous solution. Adsorption studies was carried out under varying conditions of pH, contact time, adsorbent dosage, metal ion concentration and temperature after the results were documented. Batch adsorption experiments revealed that the adsorbents performed optimally at a pH of 11 and the adsorption process was dependent upon changes in contact time. Adsorption capacity was observed to increase with increase in adsorbent dosage and decrease with increase in lead ion concentration across all adsorbents. Highest metal ion removal was by the GS-KOHC where 239.86 mg/g of lead ion was removed from the aqueous solution followed by the GS-HCLC at 228.0750 mg/g and then the GS-TPP adsorbent was least at 179.1235 mg/g.

Adsorptive removal of lead and cadmium ions from aqueous solutions by aluminium oxide modified onion skin wastes: Adsorbent characterization, equilibrium modelling and kinetic studies

2021 ◽  
pp. 0958305X2198988
Author(s):  
Adeyinka Sikiru Yusuff
Keyword(s):  
Metal Ions ◽  
Contact Time ◽  
Metal Ion ◽  
Aluminium Oxide ◽  
Kinetic Studies ◽  
Process Conditions ◽  
Adsorbent Dosage ◽  
Metal Ion Removal ◽  
Lead And Cadmium ◽  
Onion Skin

Aluminium oxide modified onion skin waste (Al2O3/OSW) was characterized and used for adsorption of metal ions (Pb2+ and Cd2+) in this study, and the relations between sorbent properties and metal ion sorption were investigated. The effects of adsorption process conditions on metal ion removal efficiency, including initial cation concentration, contact time, adsorbent dosage and pH, were examined. The obtained adsorption data were analyzed by various adsorption isotherm and kinetic models. It was found that the optimum values of the initial concentration, contact time, adsorbent dosage and pH were 10 mg/L, 120 min, 1.6 g/L and 6.0, respectively. At these optimum conditions, maximum removal percentages of Pb2+ and Cd2+ were 91.23 and 94.10%, respectively. The isotherm and kinetic studies showed a multilayer adsorbate-adsorbent system with the dominance of the chemisorption mechanism. The study concluded that onion skin waste is a viable, cheap and effective alternative for removing heavy metal ions from water/wastewater.

Bentonite-Biochar Combination for Manganese Ion Removal from Water

2021 ◽  
Vol 1162 ◽  
pp. 81-86
Author(s):  
Yasdi Yasdi ◽  
Rinaldi Rinaldi ◽  
Wahyu Fajar Winata ◽  
Febri Juita Anggraini ◽  
Ika Yanti ◽  
...  
Keyword(s):  
Contact Time ◽  
Metal Ion ◽  
Room Temperature ◽  
Adsorption Process ◽  
Quality Standard ◽  
Ion Concentration ◽  
Optimum Conditions ◽  
Manganese Ion ◽  
Ion Removal ◽  
Optimum Ph

Peat waters were abundant in the West Tanjung Jabung Regency of Jambi Province. Peat water contains manganese metal ion concentration that exceeds the clean water quality standard. Previous studies have been conducted to reduce levels of manganese in peat water, but the results have not been significant. This study aims to reduce levels of Manganese metal in peat water using the composition of Bentonite and Biochar. The adsorption process was carried out at room temperature (29 °C) with a stirring of 200 rpm. Some parameters measured were optimum pH of adsorption, optimum contact time and the best combination between Bentonite and Biochar. Manganese ion concentration in solution was measured using atomic absorption spectroscopy (AAS). The results of this study indicate that the optimum conditions for removing manganese ion at pH 5 and contact time 40 minutes. Tests on artificial solutions using 0.2 grams of biochar showed Mn ion removal of 42.91% (C0 = 100 mg/L, Ce = 57.09 mg/L, V = 100 mL). The best combination obtained in Bentonite: Biochar (1:2) with a mass of 0.080 gr and 0.170 gr, respectively, which able to remove 91.29% manganese ions in peat water.

Cu2+ Removal by Hydroxyapatite Nanorods Prepared by Surfactant-Templated Method

2013 ◽  
Vol 807-809 ◽  
pp. 1258-1261
Author(s):  
Shao Hong Wang ◽  
Jian Guo Xia ◽  
Mei Han Wang ◽  
Zhao Xia Hou ◽  
Xiao Dan Hu ◽  
...  
Keyword(s):  
Removal Efficiency ◽  
Contact Time ◽  
Adsorption Process ◽  
Adsorption Property ◽  
Copper Ion ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Copper Adsorption ◽  
Initial Adsorption ◽  
Templated Method

Nanohydroxyapatite (HA) with rod-like shape was synthesized by a cationic surfactant-templated method. Batch adsorption experiments were conducted to investigate its copper adsorption property from aqueous solution. The effect of initial copper ion concentration and contact time were studied. Results showed that HA adsorption capacity increased from 25.6 mg/g to 81.4 mg/g with the increase of initial copper ion concentration from 20 mg/L to 200 mg/L. Meanwhile, the removal efficiency decreased from 64.1% to 20.3%. Moreover, it also revealed that the removal efficiency of Cu2+increased with the increasing contact time and the initial adsorption process is rapidly increased within 15 min and the equilibrium was attained after 15 min.

scholarly journals Magnetically synthesized MnFe2O4 nanoparticles as an effective adsorbent for lead ion removal from an aqueous solution

2021 ◽  
Author(s):  
Mohamed R. Hassan ◽  
Mohamed I. Aly
Keyword(s):  
Contact Time ◽  
Metal Ion ◽  
Adsorption Process ◽  
Ion Concentration ◽  
Precipitation Method ◽  
Lead Ion ◽  
Order Kinetic ◽  
Adsorption Parameters ◽  
Isotherm Study ◽  
Co Precipitation

Abstract The adsorption behavior of lead(II) using a new magnetic adsorbent is investigated. The facile synthesis of MnFe2O4 was carried out using the co-precipitation method. The different parameters that affected the adsorption process were investigated such as contact time, metal ion concentration, pH, temperature, and the adsorbent dosage. The maximum lead(II) sorption capacity was found to be 75.75 (mg/g) and obtained using 1 g/L MnFe2O4 when pH equals 5.3, a temperature of 25 °C, and contact time as 60 min. The adsorption isotherm study indicated that the Langmuir model was the best model that described the adsorption process using 1 g/L MnFe2O4. Based on the values of correlation coefficient data (R2), the kinetic adsorption parameters were well defined by the second-order kinetic model. Furthermore, the temperature effect findings have been confirmed that the removal of lead ions was endothermic. The desorption efficiency reached more than 88% when used 0.01 M NaOH as an eluent.

scholarly journals Sequestration of Pb(II) and Ni(II) ions from aqueous solution using microalga Rhizoclonium hookeri: adsorption thermodynamics, kinetics, and equilibrium studies

2016 ◽  
Vol 7 (2) ◽  
pp. 214-227 ◽  
Author(s):  
S. Suganya ◽  
A. Saravanan ◽  
P. Senthil Kumar ◽  
M. Yashwanthraj ◽  
P. Sundar Rajan ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Adsorption Process ◽  
Second Order ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Equilibrium Studies ◽  
Adsorption Mode ◽  
Monolayer Adsorption ◽  
Pseudo Second Order

In the present study, the microalga Rhizoclonium hookeri (RH) was effectively applied to remove the metal ions [Pb(II) and Ni(II)] from aqueous solution in batch adsorption mode experiments. The adsorption process was influenced by several operating parameters such as initial metal ion concentration, contact time, pH, particle size, adsorbent dose, and temperature. The maximum monolayer adsorption capacity of the RH was found to be 81.7 mg g−1 and 65.81 mg g−1 for Pb(II) and Ni(II) ions, respectively, at optimum conditions. The calculated thermodynamic parameters illustrated that the adsorption process was found to be spontaneous and endothermic in nature. Experimental data were analyzed in terms of pseudo-first order, pseudo-second order, and Elovich kinetic models. The results showed that the removal of Pb(II) and Ni(II) ions followed the pseudo-second order kinetics. The adsorption isotherm data were described using two and three parameter models. The results indicate that the adsorption data were best fitted with the Sips isotherm model. Consequently, the microalga RH with good adsorbability and reusability could be used as an effective adsorbent for the adsorption of Pb(II) and Ni(II) ions from wastewater.

Use of agro-waste (Musa paradisiaca peels) as a sustainable biosorbent for toxic metal ions removal from contaminated water

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Contact Time ◽  
Metal Ion ◽  
Equilibrium Concentration ◽  
Ion Concentration ◽  
Contaminated Water ◽  
Musa Paradisiaca ◽  
Percentage Removal ◽  
Adsorbent Dose

A study of removal of heavy metal ions from heavy metal contaminated water using agro-waste was carried out with Musa paradisiaca peels as test adsorbent. The study was carried by adding known quantities of lead (II) ions and cadmium (II) ions each and respectively into specific volume of water and adding specific dose of the test adsorbent into the heavy metal ion solution, and the mixture was agitated for a specific period of time and then the concentration of the metal ion remaining in the solution was determined with Perkin Elmer Atomic absorption spectrophotometer model 2380. The effect of contact time, initial adsorbate concentration, adsorbent dose, pH and temperature were considered. From the effect of contact time results equilibrium concentration was established at 60minutes. The percentage removal of these metal ions studied, were all above 90%. Adsorption and percentage removal of Pb2+ and Cd2+ from their aqueous solutions were affected by change in initial metal ion concentration, adsorbent dose pH and temperature. Adsorption isotherm studies confirmed the adsorption of the metal ions on the test adsorbent with good mathematical fits into Langmuir and Freundlich adsorption isotherms. Regression correlation (R2) values of the isotherm plots are all positive (>0.9), which suggests too, that the adsorption fitted into the isotherms considered.

Utilisation of Biomass and Hybrid Biochar from Elephant Grass and Low Density Polyethylene for the Competitive Adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) from Aqueous Media

2020 ◽  
Vol 13 ◽  
Author(s):  
Joshua O. Ighalo ◽  
Lois T. Arowoyele ◽  
Samuel Ogunniyi ◽  
Comfort A. Adeyanju ◽  
Folasade M. Oladipo-Emmanuel ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Removal Efficiency ◽  
Contact Time ◽  
Competitive Adsorption ◽  
Adsorption Process ◽  
Aqueous Media ◽  
Polluted Water ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Elephant Grass

Background: The presence of pollutants in polluted water is not singularized hence pollutant species are constantly in competition for active sites during the adsorption process. A key advantage of competitive adsorption studies is that it informs on the adsorbent performance in real water treatment applications. Objective: This study aims to investigate the competitive adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) using elephant grass (Pennisetum purpureum) biochar and hybrid biochar from LDPE. Method: The produced biochar was characterised by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR). The effect of adsorption parameters, equilibrium isotherm modelling and parametric studies were conducted based on data from the batch adsorption experiments. Results: For both adsorbents, the removal efficiency was >99% over the domain of the entire investigation for dosage and contact time suggesting that they are very efficient for removing multiple heavy metals from aqueous media. It was observed that removal efficiency was optimal at 2 g/l dosage and contact time of 20 minutes for both adsorbent types. The Elovich isotherm and the pseudo-second order kinetic models were best-fit for the competitive adsorption process. Conclusion: The study was able to successfully reveal that biomass biochar from elephant grass and hybrid biochar from LDPE can be used as effective adsorbent material for the removal of heavy metals from aqueous media. This study bears a positive implication for environmental protection and solid waste management.

Removal of heavy metal ion from synthetic wastewater using spent tea waste powder

2021 ◽  
pp. 24-38
Author(s):  
Devyanshu Sachdev ◽  
Shyam Sunder Mishra ◽  
Srinivas Tadepalli
Keyword(s):  
Metal Ion ◽  
Traditional Approach ◽  
Operating Conditions ◽  
Ion Concentration ◽  
Metal Particles ◽  
Synthetic Wastewater ◽  
Batch Adsorption ◽  
Toxic Heavy Metals ◽  
Copper Solution ◽  
Tea Waste

The current work centres around on the expulsion of toxic heavy metals from mechanical effluents through the cycle of adsorption. This traditional approach is expensive, henceforth the utilization of ease, bountiful naturally neighbourly bio sorbents must be utilized. Adsorption conduct of copper and lead from waste water has been researched in this paper utilizing adsorbent like used tea powder waste. Copper and lead are profoundly harmful metal particles and considered as the need contamination delivered from different chemical ventures electroplating, blending exercises, smelting, battery manufacture etc. The effluents have been unnecessarily delivered into the climate because of expeditious industrialization and have made a worldwide concern. Hence, they should be taken out before release. In current paper, the trial results did in batch adsorption measure utilizing the treated waste tea powder with engineered test arranged in the test center were tried and introduced. The different boundaries, for example, solution’s pH, initial metal ion concentration, temperature and adsorbent dosage on the adsorption of Cu and Pb were considered. The greatest evacuation of Copper was above (at pH 5) 90% was observed using used tea waste powder at 100 ppm Copper solution. The removal of lead was above 85% (at pH 5) was respectively observed at the same operating conditions.

Sign in / Sign up

Export Citation Format

Share Document