scholarly journals Magnetically synthesized MnFe2O4 nanoparticles as an effective adsorbent for lead ion removal from an aqueous solution

2021 ◽  
Author(s):  
Mohamed R. Hassan ◽  
Mohamed I. Aly
Keyword(s):  
Contact Time ◽  
Metal Ion ◽  
Adsorption Process ◽  
Ion Concentration ◽  
Precipitation Method ◽  
Lead Ion ◽  
Order Kinetic ◽  
Adsorption Parameters ◽  
Isotherm Study ◽  
Co Precipitation

Abstract The adsorption behavior of lead(II) using a new magnetic adsorbent is investigated. The facile synthesis of MnFe2O4 was carried out using the co-precipitation method. The different parameters that affected the adsorption process were investigated such as contact time, metal ion concentration, pH, temperature, and the adsorbent dosage. The maximum lead(II) sorption capacity was found to be 75.75 (mg/g) and obtained using 1 g/L MnFe2O4 when pH equals 5.3, a temperature of 25 °C, and contact time as 60 min. The adsorption isotherm study indicated that the Langmuir model was the best model that described the adsorption process using 1 g/L MnFe2O4. Based on the values of correlation coefficient data (R2), the kinetic adsorption parameters were well defined by the second-order kinetic model. Furthermore, the temperature effect findings have been confirmed that the removal of lead ions was endothermic. The desorption efficiency reached more than 88% when used 0.01 M NaOH as an eluent.

Extraction of Heavy Metals from Aqueous Medium by Husk Biomass: Adsorption Isotherm, Kinetic and Thermodynamic study

2019 ◽  
Vol 233 (2) ◽  
pp. 201-223 ◽  
Author(s):  
Khalida Naseem ◽  
Rahila Huma ◽  
Aiman Shahbaz ◽  
Jawaria Jamal ◽  
Muhammad Zia Ur Rehman ◽  
...  
Keyword(s):  
Metal Ions ◽  
Aqueous Medium ◽  
Contact Time ◽  
Metal Ion ◽  
Adsorption Process ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Adsorption Sites ◽  
Order Kinetic Model

Abstract This study describes the adsorption of Cu (II), Co (II) and Ni (II) ions from wastewater on Vigna radiata husk biomass. The ability of adsorbent to capture the metal ions has been found to be in the order of Ni (II)>Co (II) and Cu (II) depending upon the size and nature of metal ions to be adsorbed. It has been observed that percentage removal of Cu (II), Co (II) and Ni (II) ions increases with increase of adsorbent dosage, contact time and pH of the medium but up to a certain extent. Maximum adsorption capacity (qmax) for Cu (II), Co (II) and Ni (II) ions has been found to be 11.05, 15.04 and 19.88 mg/g, respectively, under optimum conditions of adsorbent dosage, contact time and pH of the medium. Langmuir model best fits the adsorption process with R2 value approaches to unity for all metal ions as compared to other models because adsorption sites are seemed to be equivalent and only monolayer adsorption may occur as a result of binding of metal ion with a functional moiety of adsorbent. Pseudo second order kinetic model best interprets the adsorption process of Cu (II), Co (II) and Ni (II) ions. Thermodynamic parameters such as negative value of Gibbs energy (∆G°) gives information about feasibility and spontaneity of the process. Adsorption process was found to be endothermic for Cu (II) ions while exothermic for Co (II) and Ni (II) ions as signified by the value of enthalpy change (∆H°). Husk biomass was recycled three times for removal of Ni (II) from aqueous medium to investigate its recoverability and reusability. Moreover V. radiata husk biomass has a potential to extract Cu (II) and Ni (II) from electroplating wastewater to overcome the industrial waste water pollution.

Adsorption of heavy metals from aqueous solutions by Mg–Al–Zn mingled oxides adsorbent

2016 ◽  
Vol 74 (7) ◽  
pp. 1644-1657 ◽  
Author(s):  
Mona El-Sayed ◽  
Gh. Eshaq ◽  
A. E. ElMetwally
Keyword(s):  
Heavy Metals ◽  
Metal Ion ◽  
Second Order ◽  
Ion Concentration ◽  
Precipitation Method ◽  
Isotherm Models ◽  
Infrared Spectrometry ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Pseudo Second Order

In our study, Mg–Al–Zn mingled oxides were prepared by the co-precipitation method. The structure, composition, morphology and thermal stability of the synthesized Mg–Al–Zn mingled oxides were analyzed by powder X-ray diffraction, Fourier transform infrared spectrometry, N2 physisorption, scanning electron microscopy, differential scanning calorimetry and thermogravimetry. Batch experiments were performed to study the adsorption behavior of cobalt(II) and nickel(II) as a function of pH, contact time, initial metal ion concentration, and adsorbent dose. The maximum adsorption capacity of Mg–Al–Zn mingled oxides for cobalt and nickel metal ions was 116.7 mg g−1, and 70.4 mg g−1, respectively. The experimental data were analyzed using pseudo-first- and pseudo-second-order kinetic models in linear and nonlinear regression analysis. The kinetic studies showed that the adsorption process could be described by the pseudo-second-order kinetic model. Experimental equilibrium data were well represented by Langmuir and Freundlich isotherm models. Also, the maximum monolayer capacity, qmax, obtained was 113.8 mg g−1, and 79.4 mg g−1 for Co(II), and Ni(II), respectively. Our results showed that Mg–Al–Zn mingled oxides can be used as an efficient adsorbent material for removal of heavy metals from industrial wastewater samples.

scholarly journals Bio-sorption for Effective Removal of Chromium (VI) from Wastewater Using Moringa Stenopetala Seed Powder (MSSP) and Banana Peel Powder (BPP)

2020 ◽  
Author(s):  
Tolera Seda Badessa ◽  
Esayas Wakuma ◽  
Ali Mohammed Yimer
Keyword(s):  
Sorption Capacity ◽  
Contact Time ◽  
Metal Ion ◽  
Ion Concentration ◽  
Banana Peel ◽  
Order Kinetic ◽  
Moringa Stenopetala ◽  
Kinetics Of Adsorption ◽  
Banana Peel Powder ◽  
Adsorbent Dose

Abstract Chromium is an extremely toxic metal in the form of Cr (VI) that causes severe environmental and health problems. Therefore, the aim of this study was to remove chromium ions from wastewater by using cost effective and environmentally friendly bio-sorbents; Moringa stenopetala Seed Powder (MSSP), and Banana Peel Powder (BPP) and to evaluate its adsorption capacities as bio-sorbents. FT-IR characterization of the adsorbents showed that there was a change in the functional groups of the structure of both adsorbents before and after the adsorption that might be due to the adsorption processes taken place on the surface of adsorbent. Adsorption experiments were carried out as batch studies with different contact times, pH, adsorbent dose, initial metal ion concentration, and temperature. Results showed maximum removal efficiency for Cr (VI) at 120 minutes contact time, adsorbent dose of 20 g/L and pH 2 by MSSP and pH 4 by BPP. The percentage removal of Cr(VI) increased with increasing adsorbent dose( from 5g/L to 20 g/L) and contact time (from 60 min to 120 min). Freundlich isotherm model showed a better fit to the equilibrium data than the Langmuir model. The kinetics of adsorption for chromium was well represented by pseudo-second order kinetic model and the calculated equilibrium sorption capacity of the model showed good agreement with the sorption capacity obtained from Experimental results.

scholarly journals Removal of Zn (II) and Cu (II) Ions from Industrial Wastewaters Using Magnetic Biochar Derived from Water Hyacinth

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Benias C. Nyamunda ◽  
Terrence Chivhanga ◽  
Upenyu Guyo ◽  
Fidelis Chigondo
Keyword(s):  
Water Hyacinth ◽  
Contact Time ◽  
Metal Ion ◽  
Adsorption Process ◽  
Kinetic Studies ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Magnetic Biochar ◽  
Metal Ion Removal ◽  
High Sorption

This study evaluates the effectiveness of magnetic biochar (Fe2O3-EC) derived from water hyacinth in the removal of Cu+2 and Zn+2 from aqueous solution. Fe2O3-EC was prepared by chemical coprecipitation of a mixture of FeCl2 and FeCl3 on water hyacinth biomass followed by pyrolysis. The adsorbent was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDX). Batch adsorption studies on the effects of temperature, biosorbent dosage, contact time, and initial metal ion concentration were carried out. Fe2O3-EC exhibited optimum contact time, biosorbent dosage, and pH values of 65 min, 1.2 g, and 6, respectively. Fe2O3-EC exhibited strong magnetic separation ability and high sorption capability. Metal ion adsorption onto the biochar conformed to the Langmuir isotherm. Kinetic studies revealed that the adsorption process followed pseudo-second-order model. The calculated thermodynamic parameters showed that the adsorption process was feasible and exothermic in nature. These results have demonstrated that the use of Fe2O3-EC in metal ion removal could provide an alternative way to manage and utilize this highly problematic invasive species.

Adsorption of Cu(II), Ni(II) and Zn(II) ions by nano kaolinite: Thermodynamics and kinetics studies

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Metal Ions ◽  
Metal Ion ◽  
Adsorption Process ◽  
Ion Concentration ◽  
Order Kinetic ◽  
Adsorption Data ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir

An easy route for preparation emulsion of kaolinite (Al2Si2O5.4H2O) from Sweileh sand deposits, west Amman, Jordan by hydrochloric acid under continuous stirring for 4 h at room temperature was performed and nano kaolinite powder was used as an adsorbent for the removal of Cu(II), Zn(II) and Ni(II) ions. Nano kaolinite was characterized by XRD, FT-IR and SEM techniques. Effect of pH, adsorbent dose, initial metal ion concentration, contact time and temperature on adsorption process was examined. The negative values of ΔGo and the positive value of ΔHo revealed that the adsorption process was spontaneous and endothermic. The Langmuir isotherm model fitted well to metal ions adsorption data and the adsorption capacity. The kinetic data provided the best correlation of the adsorption with pseudo-second order kinetic model. In view of promising efficiency, the nano kaolinite can be employed for heavy metal ions adsorption.

Bentonite-Biochar Combination for Manganese Ion Removal from Water

2021 ◽  
Vol 1162 ◽  
pp. 81-86
Author(s):  
Yasdi Yasdi ◽  
Rinaldi Rinaldi ◽  
Wahyu Fajar Winata ◽  
Febri Juita Anggraini ◽  
Ika Yanti ◽  
...  
Keyword(s):  
Contact Time ◽  
Metal Ion ◽  
Room Temperature ◽  
Adsorption Process ◽  
Quality Standard ◽  
Ion Concentration ◽  
Optimum Conditions ◽  
Manganese Ion ◽  
Ion Removal ◽  
Optimum Ph

Peat waters were abundant in the West Tanjung Jabung Regency of Jambi Province. Peat water contains manganese metal ion concentration that exceeds the clean water quality standard. Previous studies have been conducted to reduce levels of manganese in peat water, but the results have not been significant. This study aims to reduce levels of Manganese metal in peat water using the composition of Bentonite and Biochar. The adsorption process was carried out at room temperature (29 °C) with a stirring of 200 rpm. Some parameters measured were optimum pH of adsorption, optimum contact time and the best combination between Bentonite and Biochar. Manganese ion concentration in solution was measured using atomic absorption spectroscopy (AAS). The results of this study indicate that the optimum conditions for removing manganese ion at pH 5 and contact time 40 minutes. Tests on artificial solutions using 0.2 grams of biochar showed Mn ion removal of 42.91% (C0 = 100 mg/L, Ce = 57.09 mg/L, V = 100 mL). The best combination obtained in Bentonite: Biochar (1:2) with a mass of 0.080 gr and 0.170 gr, respectively, which able to remove 91.29% manganese ions in peat water.

scholarly journals Yam Peels as Adsorbent for the Removal of Copper (Cu) and Manganese (Mn) in Waste Water

2017 ◽  
Vol 1 (2) ◽  
pp. 230-243 ◽  
Author(s):  
E. S. Isagba ◽  
S. Kadiri ◽  
I. R. Ilaboya
Keyword(s):  
Waste Water ◽  
Experimental Data ◽  
Metal Ions ◽  
Kinetic Models ◽  
Contact Time ◽  
Metal Ion ◽  
Second Order ◽  
Ion Concentration ◽  
Order Kinetic ◽  
Pseudo Second Order

This paper investigated the use of yam peel as a natural adsorbent for the removal of Copper (Cu) and Manganese (Mn) from waste water. The yam peels were thoroughly washed with distilled water, dried, pulverized and carbonized. The carbonized yam peel was then characterized for its particle sizes, moisture content, ash content, volatile matter, Methylene Blue number, Iodine number. The raw yam peels were prepared using the same procedure, but was not carbonized. The adsorption of Mn(II) and Cu(II) ions were investigated using adsorption experiment at room temperature. The effect of contact time, metal ion concentration and dosage were evaluated. The residual concentrations of the metal ions were determined by Atomic Absorption Spectrophotometer (AAS). Experimental data obtained were analyzed using Kinetic models and Isotherms such as Pseudo- First order kinetic models, Pseudo-second order kinetic models, Langmuir isotherms and Freundlich isotherm. The analysis showed that the pseudo-second order kinetic model best described the adsorption of the metal ions; ( Cu; r2 = 0.991 for RYP and r2 = 0.834 for AYP) and (Mn; r2 = 0.958 for RYP and r2 = 0.896 for AYP) and the experimental data best fit the Freundlich model; (Cu; r2 = 0.564 for RYP and r2 = 0.871 for AYP) and (Mn; r2 = 0.685 for RYP and r2 = 0.736 for AYP). Finally, optimum removal efficiencies of 30.54% for Mn(II) and 39.62% for Cu(II) were obtained for AYP at concentrations of 50mg/l and mass dosage of 1.0g, 120 minutes contact time and a pH of 6.8.

Mesoporous Iron-Manganese Magnetic Bimetal Oxide for Efficient Removal of Cr(VI) from Synthetic Aqueous Solution

2018 ◽  
Vol 877 ◽  
pp. 33-38 ◽  
Author(s):  
Kartick Lal Bhowmik ◽  
M. Kanmani ◽  
Akash Deb ◽  
Animesh Debnath ◽  
Ranendu Kumar Nath ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Adsorption Process ◽  
Adsorption Property ◽  
Toxic Metal ◽  
Bet Surface Area ◽  
Precipitation Method ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Iron Manganese

A facile co-precipitation method was established for synthesis of mesoporous iron-manganese magnetic bimetal oxide (MIMO) and its adsorption property was studied for removal of toxic metal ion hexavalent chromium from aqueous solution. XRD pattern of MIMO confirms the existence of Fe2O3 and Mn3O4 particle, out of which Mn3O4 is ferrimagnetic in nature. Synthesized MIMO has shown high saturation magnetization (23.08 emu/g), high BET surface area (178.27 m2/g) and high pore volume (0.484 cm3/g), which makes it a potential adsorbent. Adsorption process followed second order kinetic and Langmuir isotherm model. Involvement of intra-particle diffusion is also confirmed from kinetic data, which can be attributed to the mesoporous nature of the MIMO. Cr(VI) adsorption shows high pH dependency and maximum adsorption capacity of 116.25 mg/g is reported at pH 2.0. Electrostatic attraction between anionic chromium species and protonated MIMO surface is the predominant mechanism in this adsorption process.

Kinetics and Isotherms of an Iron-Modified Montmorillonite/Polycaprolactone Composite Nanofiber Membrane for the Adsorption of Cu(II) Ions

2020 ◽  
Vol 995 ◽  
pp. 183-188
Author(s):  
Lester Raj Somera ◽  
Ralph Cuazon ◽  
John Kenneth Cruz ◽  
Leslie Joy L. Diaz
Keyword(s):  
Adsorption Capacity ◽  
Contact Time ◽  
Metal Ion ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Nanofiber Membrane ◽  
Modified Montmorillonite ◽  
Sorption Energy ◽  
Kinetics And Isotherms

Exposure to toxic concentrations of Cu (II) continues to rise as developing countries undergo rapid industrialization. Because of its high solubility in water, improperly disposed copper contaminate our water sources in its aqueous Cu (II) form. A nanofiber membrane composed of iron-modified montmorillonite (Fe-MMt) dispersed in polycaprolactone (PCL) was electrospun for the adsorption of Cu (II) ions. Kinetics and isotherm models were used to study the adsorption behavior of the fabricated membrane. The adsorption capacity of this membrane was observed as a function of increasing contact time and initial Cu (II) ion concentration. Kinetic studies showed that Cu (II) adsorption follows a pseudo-second order kinetic model, while isotherm studies determined the adsorption to be monolayer as described by the Langmuir isotherm. Furthermore, it was observed that the adsorption capacity increases with increasing contact time, and with increasing initial metal ion concentration up to a maximum value of 6.44 mgg-1. Lastly, the Dubinin-Kaganer-Radushkevich isotherm was used to calculate for the sorption energy and determine the type of adsorption. A sorption energy of-5.83 kJmol-1 was obtained, thus the adsorption was classified to be physical.

scholarly journals Bio-sorption for effective removal of chromium(VI) from wastewater using Moringa stenopetala seed powder (MSSP) and banana peel powder (BPP)

BMC Chemistry ◽  
2020 ◽  
Vol 14 (1) ◽  
Author(s):  
Tolera Seda Badessa ◽  
Esayas Wakuma ◽  
Ali Mohammed Yimer
Keyword(s):  
Sorption Capacity ◽  
Contact Time ◽  
Metal Ion ◽  
Ion Concentration ◽  
Banana Peel ◽  
Order Kinetic ◽  
Moringa Stenopetala ◽  
Kinetics Of Adsorption ◽  
Banana Peel Powder ◽  
Adsorbent Dose

Abstract Chromium is an extremely toxic metal in the form of Cr(VI) that causes severe environmental and health problems. Therefore, the aim of this study was to remove chromium ions from wastewater by using cost effective and environmentally friendly bio-sorbents; Moringa stenopetala seed powder (MSSP), and banana peel powder (BPP) and to evaluate its adsorption capacities as bio-sorbents. FT-IR characterization of the adsorbents showed that there was a change in the functional groups of the structure of both adsorbents before and after the adsorption that might be due to the adsorption processes taken place on the surface of adsorbent. Adsorption experiments were carried out as batch studies with different contact times, pH, adsorbent dose, initial metal ion concentration, and temperature. Results showed maximum removal efficiency for Cr(VI) at 120 min contact time, adsorbent dose of 20 g/L and pH 2 by MSSP and pH 4 by BPP. The percentage removal of Cr(VI) increased with increasing adsorbent dose (from 5 to 20 g/L) and contact time (from 60 to 120 min). Freundlich isotherm model showed a better fit to the equilibrium data than the Langmuir model. The kinetics of adsorption for chromium was well represented by pseudo-second order kinetic model and the calculated equilibrium sorption capacity of the model showed good agreement with the sorption capacity obtained from experimental results.

Sign in / Sign up

Export Citation Format

Share Document