scholarly journals Fire Behavior of the Assembled Monolithic Hollow-Ribbed Slabs

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
B. Li ◽  
Y. Q. Lin ◽  
H. L. Zhang ◽  
M. J. Ma
Keyword(s):  
Experimental Data ◽  
Optimum Design ◽  
Fire Resistance ◽  
Fire Behavior ◽  
Great Influence ◽  
Fire Tests ◽  
Structural Fire ◽  
Temperature Distributions ◽  
Comparison Of The Results

This paper presents the results from the furnace tests conducted on two assembled monolithic hollow-ribbed (AMH) slabs consisting of the open box and the covered box, respectively. Detailed experimental data in the form of describing slab cracking or spalling, furnace temperatures, temperature distributions, and vertical deflections are presented. Comparison of the results from the two fire tests indicates that the covered box shows better fire resistance compared to the open box; thus, the covered box is recommended to adopt in structural fire-resistant design. However, they are both prone to cracking or spalling at their bottom surfaces during the fire tests, so the AMH slab still needs further optimum design to meet its requirements of fire resistance and service function. In addition, the sealing quality of congruent boxes also has a great influence on the fire resistance of the AMH slab.

Experimental Study on Fire Resistance Properties of Post-Installed Rebar Connection

2013 ◽  
Vol 671-674 ◽  
pp. 1877-1882 ◽  
Author(s):  
Xin Wang ◽  
Chang Jiu Jiang ◽  
Kao Zhong Zhao ◽  
Xiang Rui Chen
Keyword(s):  
Experimental Study ◽  
Fire Resistance ◽  
Great Influence ◽  
Fire Tests ◽  
Test Results ◽  
Whole Process ◽  
Fire Endurance ◽  
Organic Adhesive

A serial of fire tests have been conducted to study the fire resistance of the post-installed rebar connection with organic adhesive. Research variables include three kinds of anchorage depth. Loads are applied to specimens through lever and remain a constant throughout the whole process of the tests. The temperatures of connections are elevated following the ISO834 curve and the failure is controlled by excessive deflection of bonded-in rebar beams. The test results show that anchorage depth has a great influence on the performance of bonded-in rebar beams exposed to fire. Beams using organic adhesive fail suddenly with obvious rebar slip, and behave with poor fire endurance.

ANALYSIS OF EXPERIMENTAL DATA ON THE EFFECT OF BOTTOM VENTILATION CONDITIONS ON FIRE BEHAVIOR OVER A THERMALLY THIN NATURAL LATEX FOAM

2020 ◽  
Vol 51 (4) ◽  
pp. 359-376
Author(s):  
Dongmei Huang ◽  
Qi Yuan ◽  
Yu Wang ◽  
YiWei Hu ◽  
Yongliang Chen ◽  
...  
Keyword(s):  
Experimental Data ◽  
Fire Behavior ◽  
Ventilation Conditions

Expert System for Quality Assessment of Electronic Book Exhibitions

2013 ◽  
pp. 32-39
Author(s):  
Svetlana V. Savkina
Keyword(s):  
Expert System ◽  
Quality Assessment ◽  
Electronic Book ◽  
Electronic Books ◽  
Comparison Of The Results

The article presents the results of testing the complex methodology of assessment of quality of electronic books exhibitions (EBE). The author describes the project of the expert system, allowing to implement the EBE assessment without the experts’ participation. There is given the comparison of the results of assessments, carried out by experts and by the expert system.

Орошение томата F1 Донской в открытом грунте Московской области

2019 ◽  
Author(s):  
D.I. Engalychev ◽  
N.A. Engalycheva ◽  
A.M. Menshikh
Keyword(s):  
Experimental Data ◽  
Agricultural Technology ◽  
Tomato Fruits ◽  
River Floodplain ◽  
Yield And Quality ◽  
Open Ground ◽  
Alluvial Meadow ◽  
Standard Production ◽  
Moscow River

Представлены экспериментальные данные о влиянии капельного орошения на урожайность и качество плодов томата при выращивании культуры в открытом грунте Московской области. На плодородных аллювиальных луговых почвах Москворецкой поймы при соблюдении агротехники без орошения в среднем за три года исследований в полевых условиях получена урожайность томата F1 Донской 31,9 т/га, с орошением 48,5 т/га, в т.ч. стандартной продукции 42,6 т/га.The article presents experimental data on the effect of drip irrigation on the yield and quality of tomato fruits when growing crops in open ground of the Moscow Region. On fertile alluvial meadow soils of the Moscow river floodplain, with the observance of agricultural technology without irrigation, the field yield of tomato hybrid F1 Donskoi on average for three years of research was 31.9 t/ha, with irrigation 48.5 t/ha, incl. standard production 42.6 t/ha.

INFLUENCE OF BIOSTIMULANTS ON THE IMMUNE PROTECTION OF CHICKENS

2019 ◽  
Keyword(s):  
Growth And Development ◽  
Digestive System ◽  
Great Influence ◽  
Egg Laying ◽  
Growth Spurt ◽  
Immune Protection ◽  
Internal Organs ◽  
State Growth ◽  
Active Peak

Among the animals of different species chickens react in greater numbers and more noticeable to a va-riety of growth biostimulators. There are great improvements on their general state, growth spurts and development of internal organs is quicker when they are injected with small portions. Such stimulation has a great influence not only on growth and development of chickens in their first period of life but also on health and productivity later on. The most active peak of reaction is when chicken is two months old. Their internal organs, especially the digestive system, develop earlier, their genitals appear earlier and they begin egg-laying much earlier too, when chickens are being fed those biostimulants. Slaughter meat yield becomes more and quality of meat improves with the influence of stimulators. A major disease pre-vention and healing effect can be reached, since most of the biostimulants raise immune system and re-sistance of the organism. It can be the only thing to justify their usage on animals. Tests show that the most typical growth spurt of birds is from fifteen to twenty percent in normal conditions. Growth spurts are also accompanied with the rise of resistance to different infections and activation of different physio-logical processes. Growth spurts can be twice or more than written here, but those spurts are usually short-timed and often accompanied with the dysfunction of different organs

Analysis of Electromagnetic Inverse Model of Resistance Spot Welding

2010 ◽  
Vol 160-162 ◽  
pp. 974-979
Author(s):  
Nai Feng Fan ◽  
Zhen Luo ◽  
Yang Li ◽  
Wen Bo Xuan
Keyword(s):  
Resistance Spot Welding ◽  
Regularization Method ◽  
Spot Welding ◽  
Influence Factors ◽  
Great Influence ◽  
Welding Process ◽  
Inverse Model ◽  
Resistance Spot ◽  
Inversion Theory

Resistance spot welding (RSW) is an important welding process in modern industrial production, and the quality of welding nugget determines the strength of products to a large extent. Limited by the level of RSW quality monitor, however, RSW has rarely been applied to the fields with high welding quality requirements. Associated with the inversion theory, in this paper, an electromagnetic inverse model of RSW was established, and the analysis of influence factors, such as the layout of the probes, the discrete program and the regularization method, was implemented as well. The result shows that the layout of the probe and the regularization method has great influence on the model. When the probe is located at the y direction of x-axis or the x direction of y-axis and Conjugate Gradient method is selected, a much better outcome can be achieved.

Study on the Data-Bases for Fire Engineering Design of Structural Steels Members

2012 ◽  
Vol 628 ◽  
pp. 156-160
Author(s):  
In Kyu Kwon ◽  
Hyung Jun Kim ◽  
Heung Youl Kim ◽  
Bum Yean Cho ◽  
Kyung Suk Cho
Keyword(s):  
Bearing Capacity ◽  
Fire Resistance ◽  
Engineering Method ◽  
Fire Tests ◽  
Structural Members ◽  
Data Bases ◽  
Load Bearing Capacity ◽  
Load Bearing ◽  
In Fire ◽  
Resistance Performance

Structural steel has been used since the early 1970’s in Korea as primary structural members such as columns, beams, and trusses. The materials have much higher strength such as fast construction, high load bearing capacity, high construction quality but those have a fatal weakness as well. Load-bearing capacity is going down when the structural members are contained in fire condition. Therefore, to protect the structural members made of steels from the heat energy the fire resistance performance required. Generally, the fire resistance performance have evaluated from the exact fire tests in fire furnaces. But the evaluation method takes much more time and higher expenses so, the engineering method requires. The engineering method not only adopts a science but also an engineering experience. In this paper, to make various data-bases for evaluation of structural members such as columns(H-section, RHS), beams, loaded fire tests were conducted and derived not only each limiting temperature but also fire resistance respectively.

scholarly journals A MODEL BASED ON FUZZY LINGUISTIC INFORMATION TO EVALUATE THE QUALITY OF DIGITAL LIBRARIES

2010 ◽  
Vol 09 (03) ◽  
pp. 455-472 ◽  
Author(s):  
F. J. CABRERIZO ◽  
J. LÓPEZ-GIJÓN ◽  
A. A. RUÍZ ◽  
E. HERRERA-VIEDMA
Keyword(s):  
Digital Libraries ◽  
User Satisfaction ◽  
Information Access ◽  
Great Influence ◽  
Linguistic Information ◽  
Model Based ◽  
Global Quality ◽  
Fuzzy Linguistic ◽  
The Web

The Web is changing the information access processes and it is one of the most important information media. Thus, the developments on the Web are having a great influence over the developments on others information access instruments as digital libraries. As the development of digital libraries is to satisfy user need, user satisfaction is essential for the success of a digital library. The aim of this paper is to present a model based on fuzzy linguistic information to evaluate the quality of digital libraries. The quality evaluation of digital libraries is defined using users' perceptions on the quality of digital services provided through their Websites. We assume a fuzzy linguistic modeling to represent the users' perception and apply automatic tools of fuzzy computing with words based on the LOWA and LWA operators to compute global quality evaluations of digital libraries. Additionally, we show an example of application of this model where three Spanish academic digital libraries are evaluated by fifty users.

A Cyclic Plasticity Modeling for Uniaxial and Multiaxial Ratcheting Simulation of Austenitic Steel

2012 ◽  
Author(s):  
Salim Meziani ◽  
Lynda Djimli
Keyword(s):  
Experimental Data ◽  
Stainless Steel ◽  
Constitutive Model ◽  
Data Base ◽  
Good Choice ◽  
Cyclic Plasticity ◽  
Strain History ◽  
Material Parameters ◽  
Plastic Shakedown

The first objective of this paper investigates the influence of the previous strain history on ratcheting of the 304 L stainless steel on ambient temperature. The identification is done using the Chaboche constitutive model. New tests were performed where different strain-controlled histories have been applied prior to ratcheting tests. It is demonstrated that under the same conditions, one can observe ratcheting, plastic shakedown or elasticity according to the prior strain-controlled history. The second objective points out the correlation between the experimental data base devoted to the identification of the material parameters and the quality of the predictions in cyclic plasticity. The results suggest that the choice of the tests should be closely linked to the capabilities of the model. In particular, the presence of non proportional strain-controlled tests in the data base may be not a good choice if the model itself is not able to represent explicitly such a character.

Application of Polyhedral Mesh for Vortex Formation Study for Simple Single Pump Sump

CFD letters ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 13-27
Author(s):  
Mohamad Lutfi Samsudin ◽  
Hasril Hasini
Keyword(s):  
Experimental Data ◽  
Complex Geometry ◽  
Vortex Formation ◽  
Tetrahedral Mesh ◽  
Published Data ◽  
Hexahedral Mesh ◽  
The Past ◽  
Polyhedral Mesh ◽  
Pump Sump ◽  
Comparison Of The Results

Meshing of domain in CFD is an important step to ensure accuracy of the solution. In the past, hexahedral or tetrahedral mesh systems were commonly used, and both have their merits and demerits. For large and complex geometry, polyhedral is another option but its accuracy is claimed to be lacking. In this paper, the use of polyhedral mesh system by past researchers are reviewed. Evaluation on the application of polyhedral mesh system for the study of the vortex formation with a simple single pump sump model is made. Validation was made through the comparison of the results from hexahedral, tetrahedral and polyhedral mesh sizes and the experimental data from published data. The polyhedral mesh system was found to perform satisfactorily and was able to match the results from the hexahedral mesh system as well as the experimental data.

Sign in / Sign up

Export Citation Format

Share Document