scholarly journals Complete Chloroplast Genomes of 14 Mangroves: Phylogenetic and Comparative Genomic Analyses

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Chengcheng Shi ◽  
Kai Han ◽  
Liangwei Li ◽  
Inge Seim ◽  
Simon Ming-Yuen Lee ◽  
...  
Keyword(s):  
Single Copy ◽  
Avicennia Marina ◽  
Comparative Genomic ◽  
Mangrove Species ◽  
Rhizophora Stylosa ◽  
Protein Coding ◽  
Excoecaria Agallocha ◽  
Thespesia Populnea ◽  
Chloroplast Genomes ◽  
Genome Features

Mangroves are a group of plant species that occupy the coastal intertidal zone and are major components of this ecologically important ecosystem. Mangroves belong to about twenty diverse families. Here, we sequenced and assembled chloroplast genomes of 14 mangrove species from eight families spanning five rosid orders and one asterid order: Fabales (Pongamia pinnata), Lamiales (Avicennia marina), Malpighiales (Excoecaria agallocha, Bruguiera sexangula, Kandelia obovata, Rhizophora stylosa, and Ceriops tagal), Malvales (Hibiscus tiliaceus, Heritiera littoralis, and Thespesia populnea), Myrtales (Laguncularia racemosa, Sonneratia ovata, and Pemphis acidula), and Sapindales (Xylocarpus moluccensis). These chloroplast genomes range from 149 kb to 168 kb in length. A conserved structure of two inverted repeats (IRa and IRb, ~25.8 kb), one large single-copy region (LSC, ~89.0 kb), and one short single-copy region (SSC, ~18.9 kb) as well as ~130 genes (85 protein-coding, 37 tRNAs, and 8 rRNAs) was observed. We found the lowest divergence in the IR regions among the four regions. We also identified simple sequence repeats (SSRs), which were found to be variable in numbers. Most chloroplast genes are highly conserved, with only four genes under positive selection or relaxed pressure. Combined with publicly available chloroplast genomes, we carried out phylogenetic analysis and confirmed the previously reported phylogeny within rosids, including the positioning of obscure families in Malpighiales. Our study reports 14 mangrove chloroplast genomes and illustrates their genome features and evolution.

scholarly journals Complete chloroplast genomes of 14 mangroves: phylogenetic and genomic comparative analyses

2019 ◽  
Author(s):  
Chengcheng Shi ◽  
Kai Han ◽  
Liangwei Li ◽  
Inge Seim ◽  
Simon Ming-Yuen Lee ◽  
...  
Keyword(s):  
Phylogenetic Analyses ◽  
Single Copy ◽  
Avicennia Marina ◽  
Terrestrial Plants ◽  
Mangrove Species ◽  
Rhizophora Stylosa ◽  
Comparative Analyses ◽  
Excoecaria Agallocha ◽  
Thespesia Populnea ◽  
Chloroplast Genomes

AbstractMangroves are main components of an ecosystem which connect land and ocean and is of significant ecological importance. They are found around the world and taxonomically distributed in 17 families. Until now there has been no evolutionary phylogenetic analyses on mangroves based on complete plastome sequences. In order to infer the relationship between mangroves and terrestrial plants at the molecular level, we generated chloroplast genomes of 14 mangrove species from eight families, spanning six orders: Fabales (Pongamia pinnata), Lamiales (Avicennia marina), Malpighiales (Excoecaria agallocha, Bruguiera sexangula, Kandelia obovata, Rhizophora stylosa, Ceriops tagal), Malvales (Hibiscus tiliaceus, Heritiera littoralis, Thespesia populnea), Myrtales (Laguncularia racemose, Sonneratia ovata, Pemphis acidula), and Sapindales (Xylocarpus moluccensis). The whole-genome length of these chloroplasts is from 149kb to 168kb. They have a conserved structure, with two Inverted Repeat (IRa and IRb, ~25.8kb), a large single-copy region (LSC, ~89.0kb), a short single-copy (SSC, ~18.9kb) region, as well as ~130 genes (85 protein-coding, 37 tRNA, and 8 rRNA). The number of simple sequence repeats (SSRs) varied between mangrove species. Phylogenetic analysis using complete chloroplast genomes of 71 mangrove and land plants, confirmed the previously reported phylogeny within rosids, including the positioning of obscure families such as Linaceae within Malpighiales. Most mangrove chloroplast genes are conserved and we found six genes subjected to positive or neutral selection. Genomic comparison showed IR regions have lower divergence than other regions. Our study firstly reported several plastid genetic resource for mangroves, and the determined evolutionary locations as well as comparative analyses of these species provid insights into the mangrove genetic and phylogenetic research.

scholarly journals The chloroplast genome evolution of Venus slipper (Paphiopedilum): IR expansion, SSC contraction, and highly rearranged SSC regions

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Yan-Yan Guo ◽  
Jia-Xing Yang ◽  
Ming-Zhu Bai ◽  
Guo-Qiang Zhang ◽  
Zhong-Jian Liu
Keyword(s):  
Gene Order ◽  
Inverted Repeat ◽  
Single Copy ◽  
Gene Content ◽  
Comparative Genomic ◽  
Substitution Rates ◽  
Plastome Evolution ◽  
Chloroplast Genomes ◽  
Ideal System ◽  
Small Single Copy

Abstract Background Paphiopedilum is the largest genus of slipper orchids. Previous studies showed that the phylogenetic relationships of this genus are not well resolved, and sparse taxon sampling documented inverted repeat (IR) expansion and small single copy (SSC) contraction of the chloroplast genomes of Paphiopedilum. Results Here, we sequenced, assembled, and annotated 77 plastomes of Paphiopedilum species (size range of 152,130 – 164,092 bp). The phylogeny based on the plastome resolved the relationships of the genus except for the phylogenetic position of two unstable species. We used phylogenetic and comparative genomic approaches to elucidate the plastome evolution of Paphiopedilum. The plastomes of Paphiopedilum have a conserved genome structure and gene content except in the SSC region. The large single copy/inverted repeat (LSC/IR) boundaries are relatively stable, while the boundaries of the inverted repeat and small single copy region (IR/SSC) varied among species. Corresponding to the IR/SSC boundary shifts, the chloroplast genomes of the genus experienced IR expansion and SSC contraction. The IR region incorporated one to six genes of the SSC region. Unexpectedly, great variation in the size, gene order, and gene content of the SSC regions was found, especially in the subg. Parvisepalum. Furthermore, Paphiopedilum provides evidence for the ongoing degradation of the ndh genes in the photoautotrophic plants. The estimated substitution rates of the protein coding genes show accelerated rates of evolution in clpP, psbH, and psbZ. Genes transferred to the IR region due to the boundary shift also have higher substitution rates. Conclusions We found IR expansion and SSC contraction in the chloroplast genomes of Paphiopedilum with dense sampling, and the genus shows variation in the size, gene order, and gene content of the SSC region. This genus provides an ideal system to investigate the dynamics of plastome evolution.

scholarly journals KEANEKARAGAMAN JENIS MANGROVE DI DESA MENDALOK KECAMATAN SUNGAI KUNYIT KABUPATEN MEMPAWAH

2019 ◽  
Vol 7 (1) ◽  
Author(s):  
Syahrul Muharamsyah ◽  
M Sofwan Anwari ◽  
Hafiz Ardian
Keyword(s):  
Mangrove Forest ◽  
Avicennia Marina ◽  
Raw Material ◽  
Mangrove Forests ◽  
Bruguiera Gymnorrhiza ◽  
Mangrove Species ◽  
Rhizophora Stylosa ◽  
Sonneratia Caseolaris ◽  
Rhizophora Apiculata ◽  
Bruguiera Cylindrica

Mangrove forests are unique ecosystems that have ecological, biological and socio-economic functions. The function of mangrove forests on the environment is very important especially in the coastal and oceanic regions. Mangrove forests providers of wood, leaves as raw material for medicines, and natural dye. This study aims to inventory the diversity of species of mangrove vegetation in Mendalok Village, Sungai Kunyit Subdistrict, Mempawah Regency. The benefits of this study are to provide the data on mangrove forest vegetation as basic data for local government and related agencies in efforts to protect and preserve mangrove forests in Mendalok Village, Sungai Kunyit Subdistrict, Mempawah Regency. Inventory the tree in mangrove forest used a line with measured 200 meters. There are 6 lines and the distance between the lines as far as 100 meters. The lines of observation are placed by purposive sampling. The results of research found 11 types of species and consisted of 6 genera. The genera are Avicennia, Bruguiera, Ceriops, Rhizophora, Soneratia and Xylocarpus. The species found were Avicennia alba, Avicennia marina, Bruguiera cylindrica, Bruguiera gymnorrhiza, Bruguiera parviflora, Ceriops decandra, Rhizophora apiculata, Rhizophora mucronata, Rhizophora stylosa, Sonneratia caseolaris, Xylocarpus mollucensis. Diversity of mangrove species in Mendalok Village, Sungai Kunyit Subdistrict, Mempawah Regency was high and should be maintained for conservation and ecotourism area. Keywords : conservation, ecotourism, mangrove, Mendalok Village

scholarly journals Comparative analysis of chloroplast genomes for five Dicliptera species (Acanthaceae): molecular structure, phylogenetic relationships, and adaptive evolution

PeerJ ◽  
2020 ◽  
Vol 8 ◽  
pp. e8450 ◽  
Author(s):  
Sunan Huang ◽  
Xuejun Ge ◽  
Asunción Cano ◽  
Betty Gaby Millán Salazar ◽  
Yunfei Deng
Keyword(s):  
Adaptive Evolution ◽  
Phylogenetic Relationships ◽  
Single Copy ◽  
Rrna Genes ◽  
Trna Genes ◽  
Evolutionary Analysis ◽  
Protein Coding ◽  
Variable Regions ◽  
Protein Coding Genes ◽  
Chloroplast Genomes

The genus Dicliptera (Justicieae, Acanthaceae) consists of approximately 150 species distributed throughout the tropical and subtropical regions of the world. Newly obtained chloroplast genomes (cp genomes) are reported for five species of Dilciptera (D. acuminata, D. peruviana, D. montana, D. ruiziana and D. mucronata) in this study. These cp genomes have circular structures of 150,689–150,811 bp and exhibit quadripartite organizations made up of a large single copy region (LSC, 82,796–82,919 bp), a small single copy region (SSC, 17,084–17,092 bp), and a pair of inverted repeat regions (IRs, 25,401–25,408 bp). Guanine-Cytosine (GC) content makes up 37.9%–38.0% of the total content. The complete cp genomes contain 114 unique genes, including 80 protein-coding genes, 30 transfer RNA (tRNA) genes, and four ribosomal RNA (rRNA) genes. Comparative analyses of nucleotide variability (Pi) reveal the five most variable regions (trnY-GUA-trnE-UUC, trnG-GCC, psbZ-trnG-GCC, petN-psbM, and rps4-trnL-UUA), which may be used as molecular markers in future taxonomic identification and phylogenetic analyses of Dicliptera. A total of 55-58 simple sequence repeats (SSRs) and 229 long repeats were identified in the cp genomes of the five Dicliptera species. Phylogenetic analysis identified a close relationship between D. ruiziana and D. montana, followed by D. acuminata, D. peruviana, and D. mucronata. Evolutionary analysis of orthologous protein-coding genes within the family Acanthaceae revealed only one gene, ycf15, to be under positive selection, which may contribute to future studies of its adaptive evolution. The completed genomes are useful for future research on species identification, phylogenetic relationships, and the adaptive evolution of the Dicliptera species.

scholarly journals Complete Chloroplast Genomes from Sanguisorba: Identity and Variation Among Four Species

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2137 ◽  
Author(s):  
Xiang-Xiao Meng ◽  
Yan-Fang Xian ◽  
Li Xiang ◽  
Dong Zhang ◽  
Yu-Hua Shi ◽  
...  
Keyword(s):  
Gc Content ◽  
Single Copy ◽  
Rrna Genes ◽  
Trna Genes ◽  
Protein Coding ◽  
Future Studies ◽  
Chloroplast Genomes ◽  
Close Relationship ◽  
Cp Genome ◽  
Sanguisorba Officinalis

The genus Sanguisorba, which contains about 30 species around the world and seven species in China, is the source of the medicinal plant Sanguisorba officinalis, which is commonly used as a hemostatic agent as well as to treat burns and scalds. Here we report the complete chloroplast (cp) genome sequences of four Sanguisorba species (S. officinalis, S. filiformis, S. stipulata, and S. tenuifolia var. alba). These four Sanguisorba cp genomes exhibit typical quadripartite and circular structures, and are 154,282 to 155,479 bp in length, consisting of large single-copy regions (LSC; 84,405–85,557 bp), small single-copy regions (SSC; 18,550–18,768 bp), and a pair of inverted repeats (IRs; 25,576–25,615 bp). The average GC content was ~37.24%. The four Sanguisorba cp genomes harbored 112 different genes arranged in the same order; these identical sections include 78 protein-coding genes, 30 tRNA genes, and four rRNA genes, if duplicated genes in IR regions are counted only once. A total of 39–53 long repeats and 79–91 simple sequence repeats (SSRs) were identified in the four Sanguisorba cp genomes, which provides opportunities for future studies of the population genetics of Sanguisorba medicinal plants. A phylogenetic analysis using the maximum parsimony (MP) method strongly supports a close relationship between S. officinalis and S. tenuifolia var. alba, followed by S. stipulata, and finally S. filiformis. The availability of these cp genomes provides valuable genetic information for future studies of Sanguisorba identification and provides insights into the evolution of the genus Sanguisorba.

scholarly journals The complete chloroplast genome of Saxifraga sinomontana (Saxifragaceae) and comparative analysis with other Saxifragaceae species

2019 ◽  
Vol 42 (4) ◽  
pp. 601-611 ◽  
Author(s):  
Yan Li ◽  
Liukun Jia ◽  
Zhihua Wang ◽  
Rui Xing ◽  
Xiaofeng Chi ◽  
...  
Keyword(s):  
Comparative Analysis ◽  
Chloroplast Genome ◽  
Phylogenetic Relationships ◽  
De Novo ◽  
Single Copy ◽  
Bootstrap Support ◽  
Protein Coding ◽  
Complete Chloroplast Genome ◽  
Protein Coding Genes ◽  
Chloroplast Genomes

Abstract Saxifraga sinomontana J.-T. Pan & Gornall belongs to Saxifraga sect. Ciliatae subsect. Hirculoideae, a lineage containing ca. 110 species whose phylogenetic relationships are largely unresolved due to recent rapid radiations. Analyses of complete chloroplast genomes have the potential to significantly improve the resolution of phylogenetic relationships in this young plant lineage. The complete chloroplast genome of S. sinomontana was de novo sequenced, assembled and then compared with that of other six Saxifragaceae species. The S. sinomontana chloroplast genome is 147,240 bp in length with a typical quadripartite structure, including a large single-copy region of 79,310 bp and a small single-copy region of 16,874 bp separated by a pair of inverted repeats (IRs) of 25,528 bp each. The chloroplast genome contains 113 unique genes, including 79 protein-coding genes, four rRNAs and 30 tRNAs, with 18 duplicates in the IRs. The gene content and organization are similar to other Saxifragaceae chloroplast genomes. Sixty-one simple sequence repeats were identified in the S. sinomontana chloroplast genome, mostly represented by mononucleotide repeats of polyadenine or polythymine. Comparative analysis revealed 12 highly divergent regions in the intergenic spacers, as well as coding genes of matK, ndhK, accD, cemA, rpoA, rps19, ndhF, ccsA, ndhD and ycf1. Phylogenetic reconstruction of seven Saxifragaceae species based on 66 protein-coding genes received high bootstrap support values for nearly all identified nodes, suggesting a promising opportunity to resolve infrasectional relationships of the most species-rich section Ciliatae of Saxifraga.

scholarly journals The complete structure of the cucumber (Cucumis sativus L.) chloroplast genome: Its composition and comparative analysis

2007 ◽  
Vol 12 (4) ◽  
Author(s):  
Wojciech Pląder ◽  
Yasushi Yukawa ◽  
Masahiro Sugiura ◽  
Stefan Malepszy
Keyword(s):  
Chloroplast Genome ◽  
Single Copy ◽  
Trna Genes ◽  
Inverted Repeat Region ◽  
Cucumis Sativus L ◽  
Stem Loop ◽  
Protein Coding ◽  
Chloroplast Genomes ◽  
Trna Species ◽  
Rrna Species

AbstractThe complete nucleotide sequence of the cucumber (C. sativus L. var. Borszczagowski) chloroplast genome has been determined. The genome is composed of 155,293 bp containing a pair of inverted repeats of 25,191 bp, which are separated by two single-copy regions, a small 18,222-bp one and a large 86,688-bp one. The chloroplast genome of cucumber contains 130 known genes, including 89 protein-coding genes, 8 ribosomal RNA genes (4 rRNA species), and 37 tRNA genes (30 tRNA species), with 18 of them located in the inverted repeat region. Of these genes, 16 contain one intron, and two genes and one ycf contain 2 introns. Twenty-one small inversions that form stem-loop structures, ranging from 18 to 49 bp, have been identified. Eight of them show similarity to those of other species, while eight seem to be cucumber specific. Detailed comparisons of ycf2 and ycf15, and the overall structure to other chloroplast genomes were performed.

The anatomical basis of the link between density and mechanical strength in mangrove branches

2013 ◽  
Vol 40 (4) ◽  
pp. 400 ◽  
Author(s):  
Nadia S. Santini ◽  
Nele Schmitz ◽  
Vicki Bennion ◽  
Catherine E. Lovelock
Keyword(s):  
Mechanical Strength ◽  
Avicennia Marina ◽  
Modulus Of Rupture ◽  
Carbon Gain ◽  
Bruguiera Gymnorrhiza ◽  
Mangrove Species ◽  
Rhizophora Stylosa ◽  
Anatomical Characteristics ◽  
Trade Offs ◽  
Anatomical Basis

Tree branches are important as they support the canopy, which controls photosynthetic carbon gain and determines ecological interactions such as competition with neighbours. Mangrove trees are subject to high wind speeds, strong tidal flows and waves that can damage their branches. The survival and establishment of mangroves partly depend on the structural and mechanical characteristics of their branches. In addition, mangroves are exposed to soils that vary in salinity. Highly saline conditions can increase the tension in the water column, imposing mechanical stresses on the xylem vessels. Here, we investigated how mechanical strength, assessed as the modulus of elasticity (MOE) and the modulus of rupture (MOR), and density relate to the anatomical characteristics of intact mangrove branches from southeast Queensland and whether the mechanical strength of branches varies among mangrove species. Mechanical strength was positively correlated with density of mangrove intact branches. Mechanical strength (MOE) varied among species, with Avicennia marina (Forssk.) Vierh. branches having the highest mechanical strength (2079 ± 176 MPa), and Rhizophora stylosa Griff. and Bruguiera gymnorrhiza (L.) Savigny ex Lam. and Poiret having the lowest mechanical strength (536.8 ± 39.2 MPa in R. stylosa and 554 ± 58.2 MPa in B. gymnorrhiza). High levels of mechanical strength were associated with reductions in xylem vessel lumen area, pith content and bark content, and positively associated with increases in fibre wall thickness. The associations between mechanical strength and anatomical characteristics in mangrove branches suggest trade-offs between mechanical strength and water supply, which are linked to tree growth and survival.

Sign in / Sign up

Export Citation Format

Share Document