scholarly journals Analysis of Soil Resistance under Horizontal Load of Rigid Antislide Pile

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Zhenyu Song ◽  
Yuanyuan Kong ◽  
Siqi Wang ◽  
Weifeng Zhao ◽  
Lu Chen ◽  
...  
Keyword(s):  
Plastic Zone ◽  
Earth Pressure ◽  
Horizontal Displacement ◽  
Theoretical Formula ◽  
Soil Parameters ◽  
Horizontal Load ◽  
Soil Resistance ◽  
Horizontal Force ◽  
Element Analysis ◽  
Resistance Value

In order to study the bearing characteristics and failure mechanism of the rigid antislide pile under horizontal load, the stress of rigid antislide pile under transverse axial large displacement load is analyzed by using elastic-plastic theory, finite element analysis, and model test. The theoretical formula of the proximal plastic earth pressure near the pile with the depth of soil under the horizontal force is obtained. The results show that the standard is insensitive to the variation of soil parameters and the influence of soil parameters on allowable soil resistance in front of pile should be considered. With the increase of the horizontal force of the pile top, the soil near the pile is destroyed in this process gradually, which is the decline of the cross section of the maximum soil resistance of the pile. When the horizontal displacement of pile top is 20 mm and 70 mm, the soil resistance value and the ultimate soil resistance value in front of the pile can be selected, respectively. The plastic zone develops to the front and bottom of the pile at the same speed, at an angle of 45° with the direction of gravity. When the displacement reaches 34 mm, the plastic zone develops to the deeper depth obviously. The results can provide a theoretical basis for the design and application of antislide piles during the process of slope protections.

The Numerical Analysis of Earth Pressure on Bucket Foundation Breakwater

2015 ◽  
Vol 744-746 ◽  
pp. 1194-1198
Author(s):  
Zhi Yun Wang ◽  
Xiao Long Ma ◽  
Lu Shen ◽  
Jing Lu
Keyword(s):  
Soft Soil ◽  
Three Dimensional ◽  
Engineering Application ◽  
Earth Pressure ◽  
Horizontal Displacement ◽  
General Purpose ◽  
Element Analysis ◽  
Bucket Foundation ◽  
Practical Engineering ◽  
The Stability

As a newly developed engineering structure, bucket foundation breakwater is adapted to soft soil. In this paper, the general-purpose finite element analysis package ABAQUS is employed to conduct three-dimensional numerical analyses on bucket foundation breakwater. Then earth pressure variation on bucket foundation is carried out under different loads of horizontal displacement. Through analysis it obtains the laws of the earth pressure on the meeting-wave side and the back-wave side of bucket foundation breakwater. This will provide the reference and the evidence of preliminary theory for the stability research and practical engineering application of bucket foundation breakwater.

The Analysis on Coefficient of Horizontal Subgrade Reaction of the Guardrail in the Highway

2010 ◽  
Vol 168-170 ◽  
pp. 1552-1555
Author(s):  
Lu Yang ◽  
Dai Heng Chen ◽  
Hong Zheng
Keyword(s):  
Yield Criterion ◽  
Stress Component ◽  
Horizontal Displacement ◽  
Coupling Model ◽  
Theoretical Formula ◽  
Horizontal Load ◽  
Subgrade Reaction ◽  
Model Soil ◽  
The Difference ◽  
Relationship Of

For exactly analyzing the course of the coupling impact of auto and protective guard pillar, it’s especially important to get the analytical solution of the coefficient of horizontal subgrade reaction of the horizontal column of protective guard pillar. Using the reaction relationship of soil density and horizontal load ,we build up the estimate theory of the coefficient of horizontal subgrade reaction, with a simple form, describing the relationship of horizontal subgrade reaction and horizontal displacement. Using the Mohr-coulomb yield criterion and the finite element numerical simulation result of ABAQUS, we found that during the column rotary deformation, the coefficient of horizontal subgrade reaction is not a constant ,but it will be smaller and smaller with the development of the deformation. Plastic yield of protective guard pillar and earth coupling model soil caused by horizontal load depends on the difference in value of the max stress component and the min stress component, at the same time raising a theoretical formula of the coefficient of horizontal subgrade reaction and ultimate bearing capacity of soil and setting the theoretical model of coefficient of horizontal subgrade reaction under the horizontal load ,to provide a reference of design and analyze for the practical project.

Model Test and Finite Element Analysis of Squeezed and Branch Pile Bared Vertical and Horizontal Loads

2013 ◽  
Vol 470 ◽  
pp. 1101-1104
Author(s):  
Yue Hui Li ◽  
Xiao Juan Gao ◽  
Guo Hua Zhong
Keyword(s):  
Bearing Capacity ◽  
Model Test ◽  
Horizontal Displacement ◽  
Horizontal Load ◽  
Vertical Load ◽  
Load Bearing Capacity ◽  
Element Analysis ◽  
Load Bearing ◽  
Practical Engineering ◽  
Vertical Bearing

Model tests of the squeezed and branch pile with or without vertical load are carried out and the horizontal load bearing capacity are studied in this paper. Based on the model test results, the influence of vertical load to squeezed and branch pile horizontal load bearing capacity and the influence of horizontal load to squeezed and branch pile vertical bearing capacity are analyzed with FEM. The analysis results show that the vertical load may increase the lateral bearing capacity of pile, and the horizontal load may decrease the vertical settlement, but horizontal load may increase the horizontal displacement and moment of the pile body and lead to instability and cracking failure. This should be pay more attention in the practical engineering.

The Numerical Simulation of Bearing Capacity of Pile-Bucket Foundation under Combined Loading of Up-Pull and Horizontal Force

2011 ◽  
Vol 243-249 ◽  
pp. 2171-2175
Author(s):  
Wen Bai Liu ◽  
Long Zhao ◽  
Ning Jia
Keyword(s):  
Numerical Simulation ◽  
Bearing Capacity ◽  
Horizontal Displacement ◽  
Calculation Model ◽  
Combined Loading ◽  
Horizontal Load ◽  
Horizontal Force ◽  
Bucket Foundation ◽  
Load Increase ◽  
Pulling Force

By using ABAQUS software to conduct numerical simulation and model test of pile-bucket under mono-loading of up-pulling force and horizontal force, then make comparison of both results to testify the accuracy of finite calculation model. Then by numerical simulation to study bearing capacity of pile-bucket foundation under combined loading of up-pull and horizontal force. The result shows the pile-bucket foundation horizontal displacement will increase with the increase of up-pulling force at the limit horizontal load, and the horizontal displacement becomes more obvious as the up-pulling load increasing if providing greater horizontal loading force. Before the up-pulling force reaches the limit, horizontal load will not affect up-pulling displacement; after the up-pulling force reaches the limit, the horizontal load can slightly reduce the up-pulling displacement of pile top. The effect of up-pulling load increase on horizontal displacement is obvious for pile depth in soil at 0~15m, but very tiny for pile body with buried depth over 15m.

scholarly journals The research of dynamic impacts on the hydraulic structure foundation base, transformed in the process of accident recovery

2018 ◽  
Vol 251 ◽  
pp. 04040
Author(s):  
Zaven Ter-Martirosyan ◽  
Ivan Luzin
Keyword(s):  
Field Experiments ◽  
Dynamic Properties ◽  
Soil Parameters ◽  
Experimental Site ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Foundation Base ◽  
Dynamic Impacts ◽  
Scale Experiment ◽  
Selection Of

The article presents the results of a comprehensive research of the dynamic impacts on a modified base. The modified base was obtained as a result of compensatory injection at the experimental site for the accident recovery at the hydraulic engineering structure. The complex study of the dynamic impacts includes special laboratory tests to determine the soil parameters, the finite element analysis of the experimental site, taking into account the dynamic properties, the selection of the necessary equipment for field experiments based on the numerical solution results, a full-scale experiment with the measurement of the foundation sediments of the experimental site.

Character Analysis of Balance and Imbalance of Varying Rigidity of Rigid Pile Composite Foundation under Seismic Load

2014 ◽  
Vol 1065-1069 ◽  
pp. 19-22
Author(s):  
Zhen Feng Wang ◽  
Ke Sheng Ma
Keyword(s):  
Finite Element ◽  
Bending Moment ◽  
Horizontal Displacement ◽  
Element Model ◽  
Composite Foundation ◽  
Seismic Load ◽  
Seismic Loads ◽  
Element Analysis ◽  
Rigid Pile ◽  
Rigid Pile Composite Foundation

Based on ABAQUS finite element analysis software simulation, the finite element model for dynamic analysis of rigid pile composite foundation and superstructure interaction system is established, which selects the two kinds of models, by simulating the soil dynamic constitutive model, selecting appropriate artificial boundary.The influence of rigid pile composite foundation on balance and imbalance of varying rigidity is analyzed under seismic loads. The result shows that the maximum bending moment and the horizontal displacement of the long pile is much greater than that of the short pile under seismic loads, the long pile of bending moment is larger in the position of stiffness change. By constrast, under the same economic condition, the aseismic performance of of rigid pile composite foundation on balance of varying rigidity is better than that of rigid pile composite foundation on imbalance of varying rigidity.

Reliability analysis of static liquefaction of loose sand using the random finite element method

2015 ◽  
Vol 32 (7) ◽  
pp. 2100-2119 ◽  
Author(s):  
Ali Johari ◽  
Jaber Rezvani Pour ◽  
Akbar Javadi
Keyword(s):  
Finite Element ◽  
Pressure Ratio ◽  
Monotonic Loading ◽  
Unit Weight ◽  
Soil Parameters ◽  
Loose Sand ◽  
Element Analysis ◽  
Content Type ◽  
Static Liquefaction ◽  
Random Finite Element

Purpose – Liquefaction of soils is defined as significant reduction in shear strength and stiffness due to increase in pore water pressure. This phenomenon can occur in static (monotonic) or dynamic loading patterns. However, in each pattern, the inherent variability of the soil parameters indicates that this problem is of a probabilistic nature rather than being deterministic. The purpose of this paper is to present a method, based on random finite element method, for reliability assessment of static liquefaction of saturated loose sand under monotonic loading. Design/methodology/approach – The random finite element analysis is used for reliability assessment of static liquefaction of saturated loose sand under monotonic loading. The soil behavior is modeled by an elasto-plastic effective stress constitutive model. Independent soil parameters including saturated unit weight, peak friction angle and initial plastic shear modulus are selected as stochastic parameters which are modeled using a truncated normal probability density function (pdf). Findings – The probability of liquefaction is assessed by pdf of modified pore pressure ratio at each depth. For this purpose pore pressure ratio is modified for monotonic loading of soil. It is shown that the saturated unit weight is the most effective parameter, within the selected stochastic parameters, influencing the static soil liquefaction. Originality/value – This research focuses on the reliability analysis of static liquefaction potential of sandy soils. Three independent soil parameters including saturated unit weight, peak friction angle and initial plastic shear modulus are considered as stochastic input parameters. A computer model, coded in MATLAB, is developed for the random finite element analysis. For modeling of the soil behavior, a specific elasto-plastic effective stress constitutive model (UBCSAND) was used.

Finite Element Analysis and Investigation of Double-Row Piles Supporting Structure

2013 ◽  
Vol 838-841 ◽  
pp. 779-785
Author(s):  
Liang Gu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Distribution ◽  
Maximum Shear Stress ◽  
Horizontal Displacement ◽  
Deep Foundation ◽  
Foundation Pit ◽  
Double Row ◽  
Element Analysis ◽  
Supporting Structure

The double-row piles supporting structure is a new type of supporting and protecting for deep foundation excavation. It is widely used to in design of deep foundation pit. Now how to simply and effectively design the structure of double-row piles is in a research and discuss stage. Using the Midas GTS finite element method, the displacement and stress distribution of double-row piles in the different stages of excavation are obtained, and the horizontal displacement and stress distribution of double-row piles in the different stages of excavation are calculated. The results of Midas GTS finite element analysis as follows: (1) after the excavation of foundation pit, the horizontal displacement of pile-top is maximum. The horizontal displacement decreases gradually with depth increases. And the displacement of front row piles is larger than that of back row piles; (2) the maximum shear stress is at the distance 5m to the foundation basement. The higher bending moment at the pile-top and the distance 10m to the foundation basement are consistent with the actual monitoring date. (3) the results of finite element analysis is close to the Richard software and actual monitoring data. It is show that using the finite element analysis to analyze the double-row piles supporting structure with is veritable and credible.

scholarly journals Shear Tests and Calculation of Shear Resistance with the PC Program RFEM from Thin Partition Walls of Brick in Old Buildings

2015 ◽  
Vol 10 (2) ◽  
pp. 103-112
Author(s):  
Sinan Korjenic ◽  
Bernhard Nowak ◽  
Philipp Löffler ◽  
Anna Vašková
Keyword(s):  
Horizontal Displacement ◽  
Shear Resistance ◽  
Shear Capacity ◽  
Horizontal Force ◽  
Shear Tests ◽  
Maximum Displacement ◽  
Existing Building ◽  
Material Parameters ◽  
Partition Walls ◽  
Material Studies

Abstract This paper is about the shear capacity of partition walls in old buildings based on shear tests which were carried out under real conditions in an existing building. There were experiments conducted on different floors and in each case, the maximum recordable horizontal force and the horizontal displacement of the respective mortar were measured. At the same time material studies and material investigations were carried out in the laboratory. The material parameters were used for the calculation of the precise shear capacity of each joint. In the shear tests, the maximum displacement of a mortar joint was determined at a maximum of two to four millimetres. Furthermore, no direct linear relationship between the theoretical load (wall above it) and the shear stress occurred could be detected in the analysis of the experiment, as it was previously assumed.

Research on the Prefabricated Prestressed Cylinder Foundation of Wind Turbines in the Soft Soil Region

2011 ◽  
Vol 368-373 ◽  
pp. 461-464
Author(s):  
Ren Le Ma ◽  
Ming Yi Zhang
Keyword(s):  
Large Scale ◽  
Wind Farm ◽  
Rapid Development ◽  
Soft Soil ◽  
Earth Pressure ◽  
Element Analysis ◽  
Inland Wetlands ◽  
Lateral Earth Pressure ◽  
Practical Engineering ◽  
Improved Design

With the rapid development of inland wind farm in China, the costal wind farm still has not got large-scale development as the result of the higher cost of fan foundation and the more difficulty of construction. The prefabricated prestressed cylinder foundation (PPC foundation), as a new type of wind turbine foundation designed for the soft soil region such as the inter-tidal coastal zone and inland wetlands, is introduced in this paper. The condition of lateral earth pressure distribution around the foundation which determines the flexural capacity of fan foundation in the soft soil is studied. Through theoretical analysis and mathematical derivation, the result shows that the lateral earth pressure around PPC foundation is changed with depth by 1.5th power curve which has good fitting to the finite element analysis result. The simplified and improved design process is applied into the practical engineering and the good economy of PPC foundation is proved.

Sign in / Sign up

Export Citation Format

Share Document