scholarly journals Chloride Transport Performance of Basalt-Polypropylene Fiber Reinforced Concrete under Drying-Wetting Cycles

2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Li Su ◽  
Ditao Niu ◽  
Daguan Huang ◽  
Qiang Fu
Keyword(s):  
Exposure Time ◽  
Peak Concentration ◽  
Pore Solution ◽  
Chloride Transport ◽  
Polypropylene Fiber ◽  
Chloride Concentration ◽  
Fiber Reinforced Concrete ◽  
Solution Ph ◽  
Fiber Volume ◽  
Polypropylene Fiber Reinforced Concrete

This study investigated the chloride transport performance of basalt-polypropylene fiber reinforced concrete (BPFRC) subjected to drying-wetting cycles. The effects of the strength grade, basalt fiber (BF), polypropylene fiber (PF), and hybrid BF-PF on the pore solution pH, chloride concentration distribution, chloride peak concentration (Cmax), and apparent chloride diffusion coefficient (Da) of the BPFRC were analyzed, and a multifactor model of Da was established. Moreover, the microstructures of BPFRC were studied to explore the effect of fibers on chloride transport performance of concrete in terms of theoretical pore volume, fiber-matrix interface, fiber bonding properties, and corrosion morphology. The results showed that the chloride concentration of the BPFRC increased and the pore solution pH of the BPFRC decreased with the increase in the exposure time. The chloride concentration and Da of the BPFRC decreased with the increase in the strength grade. At a fiber volume content of 0.1%, the addition of BF and PF reduced the chloride concentration and Da of the BPFRC; at a fiber volume content of 0.2%, the addition of hybrid BF-PF increased the chloride concentration and Da of the concrete. The chloride peak concentration appeared at the depth of 2 mm inside the concrete, and the change of the chloride peak concentration with exposure time followed the power function model. The theoretical pore volume of the BPFRC specimens decreased initially and then increased with the increase in the exposure time. FE-SEM observed that the bonding property between BF and matrix was better than that of PF, which could effectively control the development of microcracks.

scholarly journals Influence of the Fiber Volume Content on the Durability-Related Properties of Polypropylene-Fiber-Reinforced Concrete

2020 ◽  
Vol 12 (2) ◽  
pp. 549
Author(s):  
Chenfei Wang ◽  
Zixiong Guo ◽  
Ditao Niu
Keyword(s):  
Reinforced Concrete ◽  
Flexural Strength ◽  
Volume Content ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Freeze Thaw ◽  
Chloride Environment ◽  
Polypropylene Fiber Reinforced Concrete

Polypropylene-fiber-reinforced concrete impacts the early shrinkage during the plastic stage of concrete, and the fiber volume content influences the durability-related properties of concrete. The purpose of this paper was to investigate the influence of fiber volume content on the mechanical properties, durability, and chloride ion penetration of polypropylene-fiber-reinforced concrete in a chloride environment. Tests were carried out on cubes and cylinders of polypropylene-fiber-reinforced concrete with polypropylene fiber contents ranging from 0% to 0.5%. Extensive data from flexural strength testing, dry–wet testing, deicer frost testing, and chloride penetration testing were recorded and analyzed. The test results show that the addition of the fiber improves the failure form of the concrete specimens, and 0.1% fiber content maximizes the compactness of the concrete. The flexural strength of specimen C2 with 0.1% fiber shows the highest strength obtained herein after freeze–thaw cycling, and the water absorption of specimen C2 is also the lowest after dry–wet cycling. The results also indicate that increasing the fiber volume content improves the freeze–thaw resistance of the concrete in a chloride environment. Chlorine ions migrate with the moisture during dry–wet and freeze–thaw cycling. The chlorine ion diffusion coefficient (Dcl) increases with increasing fiber content, except for that of specimen C2 in a chloride environment. The Dcl during freeze–thaw cycling is much higher than that during dry–wet cycling.

Improved Early-Age Cohesive Stress Response from Hybrid Blends of Micro and Macro Fibers

2021 ◽  
Vol 1046 ◽  
pp. 1-7
Author(s):  
Manjunath V. Bhogone ◽  
Kolluru V.L. Subramaniam
Keyword(s):  
Reinforced Concrete ◽  
Stress Response ◽  
Volume Fraction ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Early Age ◽  
Fiber Reinforced ◽  
Cohesive Stress ◽  
Concrete Matrix ◽  
Polypropylene Fiber Reinforced Concrete

The fracture response of macro polypropylene fiber reinforced concrete (PPFRC) and hybrid blend of macro and micro polypropylene fiber reinforced concrete (HyFRC) are evaluated at 1, 3, 7 and 28 days. There is an improvement in the early-age fracture response of HyFRC compared to PPFRC. The changing cohesive stress-crack separation relationship produced by ageing of the concrete matrix is determined from the fracture test responses. An improved early-age cohesive stress response is obtained from the hybrid blend containing micro and macro fibers. The hybrid fiber blend also has a higher tensile strength at early age when compared to an identical volume fraction of macro polypropylene fibers.

DURABILITY PERFORMANCE AND DIMENSIONAL STABILITY OF POLYPROPYLENE FIBER REINFORCED CONCRETE

2018 ◽  
Vol 13 (2) ◽  
pp. 20-41 ◽  
Author(s):  
Ali Mardani-Aghabaglou ◽  
Süleyman Özen ◽  
Muhammet Gökhan Altun
Keyword(s):  
Reinforced Concrete ◽  
Dimensional Stability ◽  
Polypropylene Fiber ◽  
Pulse Velocity ◽  
Fiber Reinforced Concrete ◽  
Concrete Mixture ◽  
Fiber Reinforced ◽  
Concrete Mixtures ◽  
Durability Performance ◽  
Polypropylene Fiber Reinforced Concrete

In this study, the durability performance and dimensional stability of polypropylene fiber reinforced concrete mixture were investigated. For this purpose, two series of concrete mixtures, including a 0.45 water/cement ratio was prepared both in the absence and presence of fiber. A CEMI 42.5 R type portland cement and crushed limestone aggregate with a maximum particle size of 25 mm were used. In addition to the control mixture without fiber, three different concrete mixtures were prepared by adding polypropylene fiber as 0.4%, 0.8% and 1% of total volume into the mixture. The time-dependent fresh state properties, strength, ultrasonic pulse velocity, transport properties, drying shrinkage and freeze-thaw resistance of concrete mixtures, sodium sulfate attack and abrasion were investigated comparatively. Test results demonstrated that utilization of fiber affected the fresh properties of the concrete mixtures negatively. However, the 0.8% fiber-bearing mixture showed the highest performance in terms of durability and dimensional stability. Beyond this utilization ratio, the durability performance of the concrete mixture was negatively affected. The risk of nonhomogeneous dispersion of the fiber in the mixture was relatively high in the excess fiber-bearing mixture. Consequently, with the formation of flocculation in the mixture the void ratio of concrete mixture increased.

Sign in / Sign up

Export Citation Format

Share Document