scholarly journals Production Data Analysis and Practical Applications in the Sulige Tight Gas Reservoir, Ordos Basin, China

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Minhua Cheng ◽  
Wen Xue ◽  
Meng Zhao ◽  
Guoting Wang ◽  
Bo Ning ◽  
...  
Keyword(s):  
Data Analysis ◽  
Ordos Basin ◽  
Gas Production ◽  
Production Data ◽  
Gas Reservoirs ◽  
Tight Sandstone ◽  
Gas Reservoir ◽  
Well Pattern ◽  
Tight Gas Reservoir ◽  
Wellbore Pressure

Successful exploitation of tight sandstone gas is one of the important means to ensure the “increasing reserves and production” of the oil and gas initiative and also one of the important ways to ensure national energy security. To further improve the accuracy of historical matching of field data such as gas production and bottom-hole pressure during the production process of this type of gas reservoir, in this study, a new expression of wellbore pressure for the uniform flow of vertical fractured wells in Laplace space based on the point sink function model of vertical fractures in tight sandstone gas reservoirs is constructed. This innovation is based on a typical production data analysis plot of the Blasingame type that uses the numerical inversion decoupling mathematical equation. After analyzing the pressure and pressure derivative characteristics of each flow stage in the typical curves, a new technique of type-curve matching was proposed. In order to verify the correctness of the model and the application value of the field, based on the previous production data of Sulige Gas Field in China, a new set of production data diagnostic chart of tight sandstone gas reservoir was formed. A case analysis showed that the application of the production data analysis method and data diagnosis plot in the field accurately evaluated the development effect of the tight sandstone gas reservoirs, clarified the scale of effective sand bodies, and provided technical support for optimizing and improving the well pattern and realizing the efficient development of gas fields.

scholarly journals An Analytical Method for Parameter Interpretation of Fracture Networks in Shale Gas Reservoirs considering Uneven Support of Fractures

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Shijun Huang ◽  
Jiaojiao Zhang ◽  
Sidong Fang ◽  
Xifeng Wang
Keyword(s):  
Data Analysis ◽  
Shale Gas ◽  
Analytical Method ◽  
Material Balance ◽  
Gas Production ◽  
Production Data ◽  
Analysis Method ◽  
Gas Reservoirs ◽  
Data Analysis Method ◽  
Parameter Interpretation

In shale gas reservoirs, the production data analysis method is widely used to invert reservoir and fracture parameter, and productivity prediction. Compared with numerical models and semianalytical models, which have high computational cost, the analytical model is mostly used in the production data analysis method to characterize the complex fracture network formed after fracturing. However, most of the current calculation models ignore the uneven support of fractures, and most of them use a single supported fracture model to describe the flow characteristics, which magnifies the role of supported fracture to a certain extent. Therefore, in this study, firstly, the fractures are divided into supported fractures and unsupported fractures. According to the near-well supported fractures and far-well unsupported fractures, the SRV zone is divided into outer SRV and inner SRV. The four areas are characterized by different seepage models, and the analytical solutions of the models are obtained by Laplace transform and inverse transform. Secondly, the material balance pseudotime is introduced to process the production data under the conditions of variable production and variable pressure. The double logarithmic curves of normalized production rate, rate integration, the derivative of the integration, and material balance pseudotime are established, and the parameters are interpreted by fitting the theoretical curve to the measured data. Then, the accuracy of the method is verified by comparison the parameter interpretation results with well test results, and the influence of parameters such as the half-length and permeability of supported and unsupported fractures on gas production is analyzed. Finally, the proposed method is applied to four field cases in southwest China. This paper mainly establishes an analytical method for parameter interpretation after hydraulic fracturing based on the production data analysis method considering the uneven support of fractures, which is of great significance for understanding the mechanism of fracturing stimulation, optimization of fracturing parameters, and gas production forecast.

Production decline analysis and forecasting in tight-gas reservoirs

2012 ◽  
Vol 52 (1) ◽  
pp. 573 ◽  
Author(s):  
Mujeeb Khan Habib Mahadik ◽  
Hassan Bahrami ◽  
Mofazzal Hossain ◽  
Tsar Mitchel
Keyword(s):  
Data Analysis ◽  
Exponential Model ◽  
Production Data ◽  
Late Time ◽  
Tight Gas ◽  
Gas Reservoir ◽  
Time Production ◽  
Exponential Decline ◽  
Tight Gas Reservoir ◽  
Production History

Exponential decline curve analysis is widely used to estimate recoverable reserves due to its simplicity. In most cases, however, an exponential model cannot provide a satisfactory match of overall production history. The generalised form of a hyperbolic decline model is more powerful in matching production history than the other decline models, but it is difficult to apply in practical production data analysis since it requires predicting two unknowns as decline constants. Although a hyperbolic model may provide a good fit to early-time production decline data; it may overestimate the late-time production, especially for hydraulic fractured wells in a tight-gas reservoir. In fact, the exponential decline model might be more reliable for forecasting the late-time production. This paper presents a practical approach to production decline analysis for non-fractured and fractured wells in a tight-gas reservoir using numerical simulation. Some production rate functions and type curves are introduced to obtain the best matching values of hyperbolic, exponential and harmonic production decline constants. The simulated production rate decline data for various well and reservoir parameters are used to indicate the optimum time duration of use of each decline model and to show the time when the production decline starts following the exponential model. The proposed approach is applied in production data analysis and forecasting for a tight-gas field in WA. The results showed good agreement with the production forecast obtained from a reservoir simulation.

A Comprehensive Approach for Fracability Evaluation in Naturally Fractured Sandstone Reservoirs

2018 ◽  
Author(s):  
Zhaozhong Yang ◽  
Rui He ◽  
Xiaogang Li ◽  
Zhanling Li ◽  
Ziyuan Liu
Keyword(s):  
Large Scale ◽  
Evaluation Model ◽  
Gas Production ◽  
Natural Fracture ◽  
Tight Sandstone ◽  
Gas Reservoir ◽  
Related Factors ◽  
Gas Field ◽  
Tight Gas Reservoir ◽  
Naturally Fractured

The tight sandstone gas reservoir in southern Songliao Basin is naturally fractured and is characterized by its low porosity and permeability. Large-scale hydraulic fracturing is the most effective way to develop this tight gas reservoir. Quantitative evaluation of fracability is essential for optimizing a fracturing reservoir. In this study, as many as ten fracability-related factors, particularly mechanical brittleness, mineral brittleness, cohesion, internal friction angle, unconfined compressive strength (UCS), natural fracture, Model-I toughness, Model-II toughness, horizontal stress difference, and fracture barrier were obtained from a series of petrophysical and geomechanical experiments are analyzed. Taking these influencing factors into consideration, a modified comprehensive evaluation model is proposed based on the analytic hierarchy process (AHP). Both a transfer matrix and a fuzzy matrix were introduced into this model. The fracability evaluation of four reservoir intervals in Jinshan gas field was analyzed. Field fracturing tests were conducted to verify the efficiency and accuracy of the proposed evaluation model. Results showed that gas production is higher and more stable in the reservoir interval with better fracability. The field test data coincides with the results of the proposed evaluation model.

scholarly journals Pore Structure Differentiation between Deltaic and Epicontinental Tight Sandstones of the Upper Paleozoic in the Eastern Linxing Area, Ordos Basin, China

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Jimei Deng ◽  
Huan Zeng ◽  
Peng Wu ◽  
Jia Du ◽  
Jixian Gao ◽  
...  
Keyword(s):  
Hot Spot ◽  
Ordos Basin ◽  
Central Area ◽  
Gas Production ◽  
Tight Gas ◽  
Gas Reservoirs ◽  
Tight Sandstone ◽  
The North ◽  
Taiyuan Formation ◽  
Diagenetic Evolution

Research on tight gas reservoirs in the eastern margin of the Ordos Basin, China, has recently become a hot spot. This paper mainly studies the reservoir characteristics of tight sandstone in the north-central area close to the provenance in eastern Linxing. Cast thin section, scanning electron microscopy, high-pressure mercury injection, and X-ray diffraction (XRD) were applied to discriminate the tight sandstone reservoir differences between the Permian Taiyuan and Shanxi formations in the study area. The results show that the deltaic tight sandstones in the Shanxi Formation are dominated by lithic quartz sandstone and lithic sandstone with an average porosity of 2.3% and permeability of 0.083 mD. The epicontinental tight sandstones in the Taiyuan Formation are mainly lithic sandstone and lithic quartz sandstone, with average porosities and permeabilities of 6.9% and 0.12 mD, respectively. The pore type is dominated by secondary dissolution pores, containing a small number of primary pores, and fractures are not developed. The capillary pressure curves of the Taiyuan Formation sandstone are mainly of low displacement pressure, high mercury saturation, and mercury withdrawal efficiency, while the Shanxi Formation sandstone is mainly of high displacement pressure, low mercury saturation, and withdrawal efficiency. The diagenetic evolution of sandstone in the Shanxi Formation is in meso-diagenesis stage A, and the Taiyuan Formation has entered meso-diagenesis stage B. The siliceous cement in the Taiyuan Formation sandstone enhanced the sandstone resistance to compaction and retained some residual intergranular pores. The pore types in the Shanxi Formation sandstone are all secondary pores, while secondary pores in the Taiyuan Formation sandstone account for approximately 90%. The results can be beneficial for tight gas production in the study area and similar basins.

scholarly journals Threshold Pore Pressure Gradients in Water-Bearing Tight Sandstone Gas Reservoirs

Energies ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 4578
Author(s):  
Yong Wang ◽  
Yunqian Long ◽  
Yeheng Sun ◽  
Shiming Zhang ◽  
Fuquan Song ◽  
...  
Keyword(s):  
Water Saturation ◽  
High Water ◽  
Linear Regression Method ◽  
Tight Gas ◽  
Gas Reservoirs ◽  
Tight Sandstone ◽  
Gas Reservoir ◽  
Gas Seepage ◽  
Tight Gas Reservoir ◽  
Core Permeability

Tight gas reservoirs commonly occur in clastic formations having a complex pore structure and a high water saturation, which results in a threshold pressure gradient (TPG) for gas seepage. The micropore characteristics of a tight sandstone gas reservoir (Tuha oilfield, Xinjiang, China) were studied, based on X-ray diffraction, scanning electron microscopy and high pressure mercury testing. The TPG of gas in cores of the tight gas reservoir was investigated under various water saturation conditions, paying special attention to core permeability and water saturation impact on the TPG. A mathematical TPG model applied a multiple linear regression method to evaluate the influence of core permeability and water saturation. The results show that the tight sandstone gas reservoir has a high content of clay minerals, and especially a large proportion of illite–smectite mixed layers. The pore diameter is distributed below 1 micron, comprising mesopores and micropores. With a decrease of reservoir permeability, the number of micropores increases sharply. Saturated water tight cores show an obvious non-linear seepage characteristic, and the TPG of gas increases with a decrease of core permeability or an increase of water saturation. The TPG model has a high prediction accuracy and shows that permeability has a greater impact on TPG at high water saturation, while water saturation has a greater impact on TPG at low permeability.

A New Method to Predict Favorable Gas-Rich Area in Tight Sandstone Gas Reservoir in Daniudi Area

2013 ◽  
Vol 295-298 ◽  
pp. 3328-3332
Author(s):  
Hai Ying Han ◽  
Zhi Zhang Wang ◽  
Xin Xiao Sun ◽  
Wei Jun Wang
Keyword(s):  
Ordos Basin ◽  
Gas Reservoirs ◽  
Tight Sandstone ◽  
Gas Reservoir ◽  
Gas Field ◽  
High Productivity ◽  
Integrated Method ◽  
Geological Information ◽  
Sedimentary Microfacies ◽  
Developing Area

Daniudi gas field is a tight sandstone gas field in the northeast of Ordos Basin. How to use the successful experience in developing area to predict favorable gas-rich area in other areas in this gas field is very important to the next exploration and development in this field. This paper proposes a multi-information integrated method to predict favorable gas-rich area. Firstly describe sedimentary microfacies by integrating seismic, logging and geological information; and then summarize and analyze the seismic reflection patterns of medium-high productivity wells; finally determine the favorable gas-rich area with the distribution of storage coefficient based on the previous analysis. The welltest of newly drilled wells shows that the coincidence rate of favorable gas-rich area predicted by this method could be up to 90%,and this method could be extended to use in the other tight sandstone gas reservoirs.

scholarly journals Prediction of interwell connectivity and interference degree between production wells in a tight gas reservoir

2021 ◽  
Vol 11 (8) ◽  
pp. 3301-3310
Author(s):  
Mingze Gong ◽  
Jinliang Zhang ◽  
Zhaoxun Yan ◽  
Jinkai Wang
Keyword(s):  
Tight Gas ◽  
Well Test ◽  
Tight Sandstone ◽  
Gas Reservoir ◽  
Gas Field ◽  
Well Pattern ◽  
Geological Conditions ◽  
Tight Gas Reservoir ◽  
Production Wells ◽  
Sand Bodies

AbstractSulige gas field has poor reservoir physical properties and strong heterogeneity. The existing development well pattern is difficult to realize the overall effective production of reserves, especially in block SuX. Therefore, this paper takes SuX block in the east of Sulige as an example to describe an effective method suitable for the development of well pattern in this area. Combined with logging and production data, the connectivity of gas wells in X infill area in the east of Sulige is determined from the aspects of pressure, sand body, logging, performance and well test. By using the method of dynamic and static analysis, the connectivity between wells of main gas reservoir is judged. Through the analysis of flow unit, the discharge area and the stable value of well-controlled reserves are determined. The degree of interference determined by curve fitting and the distribution characteristics of sand bodies are comprehensively analyzed. A new oil well interference degree model defined by mathematical expression of production is established. The interference degree is quantified by gas production through numerical simulation. Based on the comprehensive analysis of the connectivity, interference degree and other factors in the area, it is determined that 500 * 600 well pattern is a reasonable well pattern in SuX block, and the interference degree is about 20%. Based on the analysis of the connectivity between wells and the interference degree between production wells in SuX block, the distribution and connectivity of sand bodies in tight sandstone gas field under complex geological conditions are determined. It provides a reasonable basis for the network encryption development of tight sandstone gas in this block. It provides a powerful technical support for the efficient development of different tight gas reservoirs in Sulige area.

Cases of Generalized Low-frequency Shadows of Tight Gas Reservoirs

2021 ◽  
pp. 1-40
Author(s):  
Renhai Pu ◽  
Qiang Han ◽  
Pengye Xu
Keyword(s):  
Ordos Basin ◽  
Low Frequency ◽  
Energy Difference ◽  
Dominant Frequency ◽  
Tight Gas ◽  
Gas Reservoirs ◽  
Gas Reservoir ◽  
Tight Gas Reservoir ◽  
Gas Layer ◽  
Gas Bearing

The phenomenon that frequency decreases and amplitude increases near the bottom of a gas layer on a seismic profile is called a low-frequency shadow, but this phenomenon may not occur in all gas reservoirs. When the tight gas reservoir is thick enough, spectral decomposition data after Fourier transform will show the characteristics similar to those of low-frequency shadows. We call it a generalized low-frequency shadows. Compared with dominant frequency of non-gas-bearing zone spectral, the dominant frequency of a gas zone moves toward the low end of the frequency range and the low-frequency amplitude increases accordingly. By analyzing known gas reservoirs such as the Sulige and Yanchang tight sandstones in the Ordos Basin and tight carbonate rocks in the Tarim Basin, we can see that, with the visual dominant seismic frequency close to 30 Hz, the peak frequency of the gas-bearing tight sandstones and tight dolomite reservoirs will move from about 30 Hz to about 10–15 Hz. There is a certain correlation between the drop of the dominant frequency of a tight gas reservoir, the attenuation energy difference, and the thickness and productivity of the gas layer. Several cases show that nearly all tight gas layers thicker than 15 m exhibit attenuation characteristics of the generalized low-frequency shadows.

Sign in / Sign up

Export Citation Format

Share Document