scholarly journals Experimental Study on Mechanical Damage and Fracture Characteristics of Granite under Different Water Cooling Conditions

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
Zhuangzhuang Yao ◽  
Zhigang Zhang ◽  
Wenbin Wu ◽  
Jiang Wu
Keyword(s):  
Acoustic Emission ◽  
Shear Failure ◽  
Elasticity Modulus ◽  
Temperature Drop ◽  
Mechanical Damage ◽  
Peak Stress ◽  
Acoustic Emission Event ◽  
Tensile Failure ◽  
Fracture Characteristics ◽  
Damage And Fracture

In order to investigate the mechanical property deterioration and fracture characteristics of granite under different temperature drop and thermal cycle conditions, the evolution laws of mechanical properties, acoustic emission event distribution, and macro and micro failure characteristics of granite under different temperature changes were studied and analyzed by the servo loading, acoustic emission monitoring, and scanning electron microscope systems. The following conclusions were gained from the test results. (1) The peak stress and elasticity modulus of the three temperature drop treatments all decreased with the increase of the number of thermal cycles. In terms of magnitude, the following relationship was satisfied: 10°C > 15°C > 20°C. After 8 cycles, the peak stress and elasticity modulus tended to be stable for 15°C and 20°C temperature drops. (2) At a temperature drop of 20°C, the heterogeneity first increased and then tended to be stable; when the temperature was dropped by 15°C at each cycle, however, the heterogeneity first decreased and then became stable; as for the case of 10°C, the heterogeneity showed an overall decreasing trend. After 4 cycles, the heterogeneities were ranked as 15°C > 20°C > 10°C. After 8 cycles, 20°C > 15°C > 10°C. (3) With the decrease of temperature drop amplitude or the increase of cycles, the connectivity of microcracks in granite improved on the whole, the aperture and shape factor of microcracks increased, the damage of granite intensified, and the duration of the quiet period in the acoustic emission ringing count rate prolonged. (4) The tensile failure dominated at a temperature drop amplitude of 10°C. When the temperature drop was 15°C, the failure mode transitioned from hybrid tension-shear failure to tensile failure as the cycle times increased, whereas the hybrid tension-shear failure dominated with a temperature drop of 20°C.

scholarly journals Study of Acoustic Emission and Mechanical Characteristics of Coal Samples under Different Loading Rates

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Huamin Li ◽  
Huigui Li ◽  
Baobin Gao ◽  
Dongjie Jiang ◽  
Junfa Feng
Keyword(s):  
Acoustic Emission ◽  
Elasticity Modulus ◽  
Loading Rate ◽  
Peak Stress ◽  
Test System ◽  
Strong Impact ◽  
Peak Strain ◽  
Compression Tests ◽  
Loading Rates ◽  
The Relationship

To study the effect of loading rate on mechanical properties and acoustic emission characteristics of coal samples, collected from Sanjiaohe Colliery, the uniaxial compression tests are carried out under various levels of loading rates, including 0.001 mm/s, 0.002 mm/s, and 0.005 mm/s, respectively, using AE-win E1.86 acoustic emission instrument and RMT-150C rock mechanics test system. The results indicate that the loading rate has a strong impact on peak stress and peak strain of coal samples, but the effect of loading rate on elasticity modulus of coal samples is relatively small. When the loading rate increases from 0.001 mm/s to 0.002 mm/s, the peak stress increases from 22.67 MPa to 24.99 MPa, the incremental percentage is 10.23%, and under the same condition the peak strain increases from 0.006191 to 0.007411 and the incremental percentage is 19.71%. Similarly, when the loading rate increases from 0.002 mm/s to 0.005 mm/s, the peak stress increases from 24.99 MPa to 28.01 MPa, the incremental percentage is 12.08%, the peak strain increases from 0.007411 to 0.008203, and the incremental percentage is 10.69%. The relationship between acoustic emission and loading rate presents a positive correlation, and the negative correlation relation has been determined between acoustic emission cumulative counts and loading rate during the rupture process of coal samples.

scholarly journals Quantitative Damage and Fracture Mode of Sandstone under Uniaxial Load Based on Acoustic Emission

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Ying Xu ◽  
Qiangqiang Zheng ◽  
Xin Gao ◽  
Rongzhou Yang ◽  
Xian Ni ◽  
...  
Keyword(s):  
Acoustic Emission ◽  
Fracture Mechanism ◽  
Damage Mechanics ◽  
Shear Failure ◽  
Rock Fracture ◽  
Damage Model ◽  
Damage Models ◽  
Uniaxial Load ◽  
Damage And Fracture ◽  
Ae Signals

The damage degree and fracture mechanism of the rock are important to the bearing performance of the rock mass and the stability of the overlying structure. Most of the existing damage models for characterizing rock damage exclude the range of postpeak stress or do not consider the compaction and closure stage of the fracture, and the description of the quantitative damage of sandstone is not accurate enough. In addition, the description of the rock fracture mechanism under load is not exact enough. Aiming at the problem of quantitative damage and fracture mechanism of the loaded rock, this paper adopts acoustic emission (AE) to monitor the loading process of sandstone under uniaxial loading. In accordance with the characteristics of the AE signal, the loading stage of sandstone under uniaxial load is divided into three stages: initial hit stage, hit stability stage, and hit instability stage. By modifying the traditional damage model and combining the AE signals of the sandstone under the load, a modified damage mechanics model is obtained, which can fully express the entire loading stage. Furthermore, through the analysis of AE signals, the fracture mechanism of sandstone under uniaxial load is studied. The results show that the modified damage model can quantitatively describe the damage at different loading stages which include two areas including the fracture compaction closure stage and the postpeak stress stage. The failure and instability of sandstone under uniaxial load is mainly shear failure. The research results can provide a reference for the nondestructive testing of sandstone and engineering reliability in geotechnical engineering.

Experimental and numerical study on crack propagation and coalescence in rock-like materials under compression

2021 ◽  
pp. 030932472098691
Author(s):  
Xiaojing Li ◽  
Yifan Bai ◽  
Xudong Chen ◽  
Xinning Zhao ◽  
Mingying Lv
Keyword(s):  
Shear Failure ◽  
Numerical Study ◽  
Reference Value ◽  
Peak Stress ◽  
Tensile Failure ◽  
Wing Crack ◽  
Splitting Failure ◽  
Single Cross ◽  
Initiation Sequence ◽  
Double Cross

The discontinuous crack surface in a rock affects the stability of the whole rock system. The experiments in this paper were carried out by prefabricating rock-like specimens with different types of flaws, then the specimens were tested under uniaxial compression. Moreover, based on the theory of particle flow, PFC2D software was used for numerical simulation, and the comparative analysis of the experimental and simulative results was carried out to obtain the crack initiation sequence, propagation phenomenon, and failure mode of rock specimens with different flaw types. The results indicated that the wing crack started at the tip of flaw and the form of crack assumed split failure, followed by shear failure caused by the secondary crack. The tensile failure degree decreases and the influence of shear failure increases with the increase of flaw angle. The wing crack and secondary initiation stress value is 35%–55% and 85%–95% of the peak stress value. Crack coalescence appeared in adjacent flaws of rock-like specimens with multiple parallel single flaws, single-cross flaws and double-cross flaws, and the coalescence phenomenon always occurs when the stress peak value is reached. With the number of flaws increasing, the splitting failure of rock-like specimens became more and more serious, the splitting failure of double cross-flaw specimen is the most serious. As for the specimen with single-cross flaw, the wing crack would be produced at the tip of the flaw with larger obliquity. The results of this paper may offer certain reference value for the study on the mechanism of rock crack.

scholarly journals Acoustic Emission and Damage Characteristics of Granite Subjected to High Temperature

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
X. L. Xu ◽  
Z.-Z. Zhang
Keyword(s):  
Acoustic Emission ◽  
High Temperatures ◽  
Count Rate ◽  
Shear Failure ◽  
Rock Fracture ◽  
Mechanical Damage ◽  
Strain Curve ◽  
Effect Of Temperature ◽  
Compression Tests ◽  
Ae Signals

Acoustic emission (AE) signals can be detected from rocks under the effect of temperature and loading, which can be used to reflect rock damage evolution process and predict rock fracture. In this paper, uniaxial compression tests of granite at high temperatures from 25°C to 1000°C were carried out, and AE signals were monitored simultaneously. The results indicated that AE ring count rate shows the law of “interval burst” and “relatively calm,” which can be explained from the energy point of view. From 25°C to 1000°C, the rock failure mode changes from single splitting failure to multisplitting failure, and then to incomplete shear failure, ideal shear failure, and double shear failure, until complete integral failure. Thermal damage (DT) defined by the elastic modulus shows logistic increase with the rise of temperature. Mechanical damage (DM) derived by the AE ring count rate can be divided into initial stage, stable stage, accelerated stage, and destructive stage. Total damage (D) increases with the rise of strain, which is corresponding to the stress-strain curve at various temperatures. Using AE data, we can further analyze the mechanism of deformation and fracture of rock, which helps to gather useful data for predicting rock stability at high temperatures.

scholarly journals Comparative experimental studies of acoustic emission characteristics of sandstone and mudstone under the impacts of cyclic loading and unloading

2018 ◽  
Vol 14 (8) ◽  
pp. 155014771879555 ◽  
Author(s):  
Guangming Zhao ◽  
Chao Wang ◽  
Dongxu Liang
Keyword(s):  
Acoustic Emission ◽  
Experimental Studies ◽  
Strain Curve ◽  
Peak Stress ◽  
Acoustic Emission Event ◽  
Acoustic Emission Activity ◽  
Deformation And Failure ◽  
Emission Point ◽  
Peak Energy ◽  
Emission Activity

In this article, the acoustic emission tests of uniaxial cyclic load imposed on or released from the sandstone and mudstone were carried out. The deformation and failure characteristics and the law governing the acoustic emission activity were studied. The results of the study show that (1) the variation of acoustic emission events of sandstone and mudstone is law governed and is in agreement with the tendency of stress and strain curve development. (2) The acoustic emission activity of mudstone is most active before peak stress, while sandstone is at peak stress. For the sandstone, when the number of acoustic emission events is the most active, the corresponding acoustic emission energy is not the largest. However, the peak value of acoustic emission events and the peak energy of the mudstone coincide, and the acoustic emission events get to the most intense due to the peak energy. (3) The acoustic emission activity is more severe when a load is imposed on or released from the rock. Compared to loading, the rock damage caused by unloading is even greater. (4) The acoustic emission event at the splitting point is more concentrated. The line of acoustic emission point is basically consistent with the shape of the split.

Comparison Analysis on the Mechanical Properties of HSC and NSC after the Action of High Temperatures

2014 ◽  
Vol 1014 ◽  
pp. 49-52
Author(s):  
Xiao Ping Su
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
High Temperatures ◽  
High Strength Concrete ◽  
Elasticity Modulus ◽  
Strain Curve ◽  
Peak Stress ◽  
High Strength ◽  
Peak Strain ◽  
Strength Concrete

With the wide application of high strength concrete in the building construction,the risk making concrete subject to high temperatures during a fire is increasing. Comparison tests on the mechanical properties of high strength concrete (HSC) and normal strength concrete (NSC) after the action of high temperature were made in this article, which were compared from the following aspects: the peak stress, the peak strain, elasticity modulus, and stress-strain curve after high temperature. Results show that the laws of the mechanical properties of HSC and NSC changing with the temperature are the same. With the increase of heating temperature, the peak stress and elasticity modulus decreases, while the peak strain grows rapidly. HSC shows greater brittleness and worse fire-resistant performance than NSC, and destroys suddenly. The research and evaluation on the fire-resistant performance of HSC should be strengthened during the structural design and construction on the HSC buildings.

On the Direction of Fatigue Cracks in Polycrystalline Ingot Iron

1952 ◽  
Vol 19 (1) ◽  
pp. 54-56
Author(s):  
F. A. McClintock
Keyword(s):  
Statistical Analysis ◽  
Shear Failure ◽  
Fatigue Cracks ◽  
Fatigue Tests ◽  
Tensile Failure ◽  
Bending Fatigue ◽  
Polycrystalline Iron

Abstract A statistical analysis is developed to show how a microscopic shear failure can result in the apparent tensile failure of polycrystalline iron in rotary bending fatigue tests.

scholarly journals Failure Process Simulation of Interlayered Rocks under Compression

2018 ◽  
Vol 2018 ◽  
pp. 1-13
Author(s):  
Chi Yao ◽  
Sizhi Zeng ◽  
Jianhua Yang
Keyword(s):  
Shear Failure ◽  
Failure Process ◽  
Strength Criterion ◽  
Tensile Failure ◽  
Strength Anisotropy ◽  
Rigid Block ◽  
Bedding Planes ◽  
Typical Experiment ◽  
Confining Pressures ◽  
Spring Method

Anisotropy in strength and deformation of rock mass induced by bedding planes and interlayered structures is a vital problem in rock mechanics and rock engineering. The modified rigid block spring method (RBSM), initially proposed for modeling of isotropic rock, is extended to study the failure process of interlayered rocks under compression with different confining pressures. The modified rigid block spring method is used to simulate the initiation and propagation of microcracks. The Mohr–Coulomb criterion is employed to determine shear failure events and the tensile strength criterion for tensile failure events. Rock materials are replaced by an assembly of Voronoi-based polygonal blocks. To explicitly simulate structural planes and for automatic mesh generation, a multistep point insertion procedure is proposed. A typical experiment on interlayered rocks in literature is simulated using the proposed model. Effects of the orientation of bedding planes with regard to the loading direction on the failure mechanism and strength anisotropy are emphasized. Results indicate that the modified RBSM model succeeds in capturing main failure mechanisms and strength anisotropy induced by interlayered structures and different confining pressures.

Sign in / Sign up

Export Citation Format

Share Document