scholarly journals Damages of Underground Facilities in Coal Mines due to Gas Explosion Shock Waves: An Overview

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Dezhi Ran ◽  
Jianwei Cheng ◽  
Rui Zhang ◽  
Yu Wang ◽  
Yuhang Wu

With coal mining depth increase, gas explosion accidents due to the high gas emission rates often occur which cause significant casualties and property damages. Among them, gas explosion shock waves not only can destroy the machines and equipment in mine roadways but also cause the failure of mine ventilation facilities resulting in secondary hazards. Thus, the mines’ serious disasters could happen. For many years, researchers have already done a great lot of works to study damages caused by the impact of shock waves of the gas explosions in underground mines. Research results provide a baseline for judgments of hazard effects by explosions. In this paper, the formation mechanism of the gas explosion shock wave is introduced firstly. Then, the damages for underground facilities, such as mechanical equipment, roadway, and life-saving devices are summarized and reviewed. Finally, a brief discussion about the methods is given, and some preliminary suggestions are also listed for improvements in the future.

2020 ◽  
Author(s):  
V. L. Kocharin ◽  
A. A. Yatskikh ◽  
D. S. Prishchepova ◽  
A. V. Panina ◽  
Yu. G. Yermolaev ◽  
...  

Author(s):  
Jan Mraček ◽  
Jan Mork ◽  
Jiri Dostal ◽  
Radek Tupy ◽  
Jolana Mrackova ◽  
...  

Abstract Background Decompressive craniectomy (DC) has become the definitive surgical procedure to manage a medically intractable rise in intracranial pressure. DC is a life-saving procedure resulting in lower mortality but also higher rates of severe disability. Although technically straightforward, DC is accompanied by many complications. It has been reported that complications are associated with worse outcome. We reviewed a series of patients who underwent DC at our department to establish the incidence and types of complications. Methods We retrospectively evaluated the incidence of complications after DC performed in 135 patients during the time period from January 2013 to December 2018. Postoperative complications were evaluated using clinical status and CT during 6 months of follow-up. In addition, the impact of potential risk factors on the incidence of complications and the impact of complications on outcome were assessed. Results DC was performed in 135 patients, 93 of these for trauma, 22 for subarachnoid hemorrhage, 13 for malignant middle cerebral artery infarction, and 7 for intracerebral hemorrhage. Primary DC was performed in 120 patients and secondary DC in 15 patients. At least 1 complication occurred in each of 100 patients (74%), of which 22 patients (22%) were treated surgically. The following complications were found: edema or hematoma of the temporal muscle (34 times), extracerebral hematoma (33 times), extra-axial fluid collection (31 times), hemorrhagic progression of contusions (19 times), hydrocephalus (12 times), intraoperative malignant brain edema (10 times), temporal muscle atrophy (7 times), significant intraoperative blood loss (6 times), epileptic seizures (5 times), and skin necrosis (4 times). Trauma (p = 0.0006), coagulopathy (p = 0.0099), and primary DC (p = 0.0252) were identified as risk factors for complications. There was no significant impact of complications on outcome. Conclusions The incidence of complications following DC is high. However, we did not confirm a significant impact of complications on outcome. We emphasize that some phenomena are so frequent that they can be considered a consequence of primary injury or natural sequelae of the DC rather than its direct complication.


2011 ◽  
Vol 11 (11) ◽  
pp. 5289-5303 ◽  
Author(s):  
G. Grell ◽  
S. R. Freitas ◽  
M. Stuefer ◽  
J. Fast

Abstract. A plume rise algorithm for wildfires was included in WRF-Chem, and applied to look at the impact of intense wildfires during the 2004 Alaska wildfire season on weather simulations using model resolutions of 10 km and 2 km. Biomass burning emissions were estimated using a biomass burning emissions model. In addition, a 1-D, time-dependent cloud model was used online in WRF-Chem to estimate injection heights as well as the vertical distribution of the emission rates. It was shown that with the inclusion of the intense wildfires of the 2004 fire season in the model simulations, the interaction of the aerosols with the atmospheric radiation led to significant modifications of vertical profiles of temperature and moisture in cloud-free areas. On the other hand, when clouds were present, the high concentrations of fine aerosol (PM2.5) and the resulting large numbers of Cloud Condensation Nuclei (CCN) had a strong impact on clouds and cloud microphysics, with decreased precipitation coverage and precipitation amounts during the first 12 h of the integration. During the afternoon, storms were of convective nature and appeared significantly stronger, probably as a result of both the interaction of aerosols with radiation (through an increase in CAPE) as well as the interaction with cloud microphysics.


1964 ◽  
Vol 19 (2) ◽  
pp. 231-239 ◽  
Author(s):  
F. Winterberg

In this paper it is shown that temperatures up to 108°K and under densities of the order 1 g/cm3 are attainable in liquid tritium-deuterium by the impact shock waves of small solid particles accelerated up to velocities of some 107 cm/s in heavy particle accelerators.The high temperatures occur in a focussed particle beam. It is shown that under feasible conditions, the particle beam will generate in the target material a shock wave of the required strength. The particles are charged electrically up to the limit of mechanical breakup and then are accelerated in linear particle accelerators to the required velocities.In order to cut down losses by Bremsstrahlung radiation, the particles must consist of low Z-value material. The most promissing substances in this regard are lithium and beryllium. The "guillotine factor” is of significance at high densities and reduces the Bremsstrahlung losses by a factor of about 1/3.The attainable temperatures are high enough to reach the lowest ignition temperatures for thermonuclear reactions.Apart from the interesting prospect of high temperature, high density experiments, the possibility cannot be excluded to ignite by this method a small fusion explosion of controllable size.


2019 ◽  
Vol 26 (4) ◽  
pp. 39-46 ◽  
Author(s):  
Ozgur Ozguc

Abstract Offshore structures are exposed to the risk of damage caused by various types of extreme and accidental events, such as fire, explosion, collision, and dropped objects. These events cause structural damage in the impact area, including yielding of materials, local buckling, and in some cases local failure and penetration. The structural response of an FPSO hull subjected to events involving dropped objects is investigated in this study, and non-linear finite element analyses are carried out using an explicit dynamic code written LS-DYNA software. The scenarios involving dropped objects are based on the impact from the fall of a container and rigid mechanical equipment. Impact analyses of the dropped objects demonstrated that even though some structural members were permanently deformed by drop loads, no failure took place in accordance with the plastic strain criteria, as per NORSOK standards. The findings and insights derived from the present study may be informative in the safe design of floating offshore structures.


2020 ◽  
Vol 201 ◽  
pp. 01026
Author(s):  
Mykola Stupnik ◽  
Vsevolod Kalinichenko ◽  
Olena Kalinichenko ◽  
Sofiia Yakovlieva

The work considers conditions of deep levels of the Underground Mine Group for underground ore mining (as underground mines) of the Mining Department of the PJSC “ArcelorMittal Kryvyi Rih” (the PJSC “ArcelorMittal Kryvyi Rih”). The research aims to improve indicators of mined ore mass extraction when mining rich iron ores through studying and optimizing consumption of explosives, enhancing mining technology to provide fulfilment of the underground iron ore mining program. During the research, there are analyzed mining geological and technical conditions of the deposit mining as well as current technologies of iron ore mining at the Underground Mine Group of the PJSC “ArcelorMittal Kryvyi Rih”. The work analyzes the achieved indices and consumption of explosives for drilling and blasting at the Underground Mine Group. The mining geological and technical conditions of the deposit mining as well as current technologies of mining, parameters of preparatory operations, the nomenclature and qualitative characteristics of many types of explosives are determined to have changed. This complicates planning consumption of explosives and making their estimates for work sites. However, this is a reason for selecting highly efficient technology and machinery in deteriorating mining and geological conditions of operating at over 1200 m depths. The work determines dependencies of a stress value on a mining depth and physical properties of rocks, as well as parameters of drilling and blasting operations considering the stress-strain state of the massif under high rock pressure at deep levels of the Mining Group of the PJSC “ArcelorMittal Kryvyi Rih”.


2011 ◽  
Vol 26 (S2) ◽  
pp. 1654-1654
Author(s):  
G. Williams ◽  
D. Murphy

The untimely event of suicidal hanging requires a timely, competent, and coordinated response by security and healthcare staff. A successful, life-saving response also requires special cutdown equipment (“suicide cutdown knife”) and staff that is trained in its proper use. The training is hands-on and practical, including retrieving the cutdown tool and actually doing some cutting. Because a serious hanging attempt is relatively rare, most security and healthcare staff have had almost no actual experience with a suicidal hanging. The presentation summarizes our in-depth training program, which includes follow-ups on every work shift to measure the impact of the training. The training includes our retention mnemonic, “The 5 Cs of Rescue.”


2021 ◽  
Author(s):  
Alexander J. Winkler ◽  
Ranga B. Myneni ◽  
Markus Reichstein ◽  
Victor Brovkin

<div> <div> <div> <p>The prevailing understanding of the carbon-cycle response to anthropogenic CO<sub>2 </sub>emissions suggests that it depends only on the magnitude of this forcing, not on its timing. However, a recent study (Winkler <em>et al</em>., <em>Earth System Dynamics</em>, 2019) demonstrated that the same magnitude of CO<sub>2 </sub>forcing causes considerably different responses in various Earth system models when realized following different temporal trajectories. Because the modeling community focuses on concentration-driven runs that do not represent a fully-coupled carbon-cycle-climate continuum, and the experimental setups are mainly limited to exponential forcing timelines, the effect of different temporal trajectories of CO<sub>2 </sub>emissions in the system is under-explored. Together, this could lead to an incomplete notion of the carbon-cycle response to anthropogenic CO<sub>2 </sub>emissions.</p> <p>We use the latest CMIP6 version of the Max-Planck-Institute Earth System Model (MPI-ESM1.2) with a fully-coupled carbon cycle to investigate the effect of emission timing in form of four drastically different pathways. All pathways emit an identical total of 1200 Pg C over 200 years, which is about the IPCC estimate to stay below 2 °K of warming, and the approximate amount needed to double the atmospheric CO<sub>2 </sub>concentration. The four pathways differ only in their CO<sub>2 </sub>emission rates, which include a constant, a negative parabolic (ramp-up/ramp-down), a linearly decreasing, and an exponentially increasing emission trajectory. These experiments are idealized, but designed not to exceed the observed maximum emission rates, and thus can be placed in the context of the observed system.</p> <p>We find that the resulting atmospheric CO<sub>2 </sub>concentration, after all the carbon has been emitted, can vary as much as 100 ppm between the different pathways. The simulations show that for pathways, where the system is exposed to higher rates of CO<sub>2 </sub>emissions early in the forcing timeline, there is considerably less excess CO<sub>2 </sub>in the atmosphere at the end. These pathways also show an airborne fraction approaching zero in the final decades of the simulation. At this point, the carbon sinks have reached a strength that removes more carbon from the atmosphere than is emitted. In contrast, the exponentially increasing pathway with high CO<sub>2 </sub>emission rates in the last decades of the simulation, the pathway usually studied, shows a fairly stable airborne fraction. We propose a new general framework to estimate the atmospheric growth rate of CO<sub>2 </sub>not only as a function of the emission rate, but also include the aspect of time the system has been exposed to excess CO<sub>2 </sub>in the atmosphere. As a result, the transient temperature response is a function not only of the cumulative CO<sub>2 </sub>emissions, but also of the time the system was exposed to the excess CO<sub>2</sub>. We also apply this framework to other Earth system models and observational records of CO<sub>2 </sub>concentration and emissions.</p> </div> </div> </div><div> <div> <div> <p>The Earth system is currently in a phase of increasing, nearly exponential CO<sub>2 </sub>forcing. The impact of excess CO<sub>2 </sub>exposure time could become apparent as we approach the point of maximum CO<sub>2 </sub>emission rate, affecting the achievability of the climate targets.</p> </div> </div> </div>


Proceedings ◽  
2019 ◽  
Vol 14 (1) ◽  
pp. 53
Author(s):  
Nicolae Barsan

SMOX-based sensors appeared as a response to a very serious safety issue in Japan, namely gas explosion accidents related to leakages of piped and bottled cooking gas. […]


Sign in / Sign up

Export Citation Format

Share Document