scholarly journals Arch Antislide Pile-Wall Structure System: Model and Optimization

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Heng Li ◽  
Hui Wang ◽  
Gaowei Yue ◽  
Fasuo Zhao ◽  
Wenzhe Li
Keyword(s):  
Structural Reliability ◽  
Bending Moment ◽  
System Model ◽  
Shanxi Province ◽  
Wall Structure ◽  
Loess Landslide ◽  
Structure System ◽  
Pile Cap ◽  
Bending Capacity ◽  
Stress And Deformation

For the problems of unreasonable force and large deformation of traditional antislide structure system, three new arch antislide pile-wall structure systems are designed for a loess landslide treatment project in Northern Shanxi province. The working performances of four kinds of antislide structures are numerically simulated and analyzed to realize the optimization of the antislide structure system. The results show that the arch antislide pile-wall structure system is a rigid connection between the piles and cap beam, and the antislide pile, cap beam, and sliding bed soil form a spatial nearly rigid structure. Cap beam can better transfer the bending moment generated by the larger thrust in the landslide middle to the piles with less force on both sides of the landslide, so that the stress and deformation of the whole antislide system tend to be uniform, which makes the antislide system “joint operation.” And this structural form increases the overall stiffness and bending capacity and reduces the possibility that the middle pile is destroyed first and loses its working capacity due to large thrust. Compared with the traditional antislide structure system (Model-1), the average displacement of the pile head is reduced by about 60%, and the total control bending moment of the system is reduced by about 6%. The purpose of Model-3 and Model-4 (anchorage arch antislide pile-wall structure system and pull-rod arch antislide pile-wall structure system) is to restrict the deformation of cap beam in both positive and negative directions of x-axis in arch antislide pile-wall structure system, which plays a certain role in coordinating the deformation of antislide structure and better coordinating the stress of each pile. The arch antislide pile-wall structure system (Model-2), anchorage arch antislide pile-wall structure system (Model-3), and pull-rod arch antislide pile-wall structure system (Model-4) can better adapt and adjust the unbalanced thrust between the landslide piles; therefore, they have higher structural robustness than that of traditional antislide structure system. When achieving the management target with a 95% structural reliability probability of the same landslide, the structural robust degrees of Model-1, Model-2, and Model-4 are 0.58, 0.76, and 0.81, respectively. Therefore, the pull-rod arch antislide pile-wall structure system (Model-4) has the best performance among the other antislide structures. These studies lay a foundation for the engineering structural optimization of arch antislide pile-wall structure system.

scholarly journals Structural Behavior of Prefabricated Ecological Grid Retaining Walls and Application in a Highway in China

Symmetry ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 746
Author(s):  
Xinquan Wang ◽  
Cong Zhu ◽  
Hongguo Diao ◽  
Yingjie Ning
Keyword(s):  
Retaining Wall ◽  
Contact Point ◽  
Retaining Walls ◽  
Wall Structure ◽  
Soil Arching ◽  
Finite Element Software ◽  
Study Results ◽  
Stress And Deformation ◽  
Asymmetrical Condition ◽  
Construction Efficiency

The retaining wall is a common slope protection structure. To tackle the current lack of sustainable and highly prefabricated retaining walls, an environmentally friendly prefabricated ecological grid retaining wall with high construction efficiency has been developed. Due to the asymmetrical condition of the project considered in this paper, the designed prefabricated ecological grid retaining wall was divided into the excavation section and the filling section. By utilizing the ABAQUS finite element software, the stress and deformation characteristics of the retaining wall columns, soil, anchor rods, and inclined shelves in an excavation section, and the force and deformation relationships of the columns, rivets, and inclined shelves in three working conditions in a filling section were studied. The study results imply that the anchor rods may affect the columns in the excavation section and the stress at the column back changes in an M-shape with height. Moreover, the peak appears at the contact point between the column and the anchor rod. The displacement of the column increases slowly along with the height, and the column rotates at its bottom. In the excavation section, the stress of the anchor rod undergoes a change at the junction of the structure. The inclined shelf is an open structure and is very different from the retaining plate structure of traditional pile-slab retaining walls. Its stress distribution follows a repeated U-shaped curve, which is inconsistent with the trend of the traditional soil arching effect between piles, which increases first and then decreases. For the retaining wall structure in the filling section, the numerical simulated vehicle load gives essentially consistent results with the effects of the equivalent filling on the concrete column.

Structural Reliability of Oil Tanker in the Adriatic Sea Damaged in Collision and Exposed to Combined Bending Moments

2018 ◽  
Author(s):  
Maro Ćorak ◽  
Joško Parunov
Keyword(s):  
Structural Reliability ◽  
Adriatic Sea ◽  
Bending Moment ◽  
State Function ◽  
Regression Equations ◽  
Bending Moments ◽  
Damage Stability ◽  
Safety Indices ◽  
Oil Tanker ◽  
Damaged Ship

The aim of the paper is the assessment of structural reliability of oil tanker which may be damaged in collision accident in the Adriatic Sea and exposed to combined, horizontal and vertical bending moments. Damage size is assumed based on the direct numerical simulation of the ship-ship collision. This is justified for some specific sea environments, as the Adriatic Sea, where ship sailing routes and representative ship types involved in accidents are known, so possible collision scenarios may be reasonably predicted. Residual bending moment capacity under combined bending moment is calculated using regression equations developed based on non-linear finite element analysis. Still water vertical bending moments are obtained by damage stability analysis. Vertical and horizontal wave bending moments are determined by short-term response analysis of damaged ship in the Adriatic Sea, using transfer functions obtained by 3D panel hydrodynamic method. Limit state function is defined using interaction equation for damaged ship exposed to combined bending moments. Safety indices are calculated by FORM for different collision scenarios that are generated by MC simulations. Such approach enables to determine the safety indices for the most frequent damages and also to reveal the most critical situations resulting in the lowest safety indices.

Research on Calculation Formula of Retaining Wall for Structural Reliability Program Design

2013 ◽  
Vol 275-277 ◽  
pp. 1154-1157
Author(s):  
Yun Lian Song ◽  
Si Li ◽  
Jian Ran Cao
Keyword(s):  
Safety Factor ◽  
Structural Reliability ◽  
Program Design ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Retaining Walls ◽  
Wall Structure ◽  
Active Earth Pressure ◽  
Material Parameters ◽  
Simplified Formula

Stability problem of gravity retaining wall structure was researched, and a simplified formula of the active earth pressure Ea was turned out for the convenience of the program design. The anti-slide safety factor K0 and anti-overturning safety factor Kc were derived based on different positions of slip plane of retaining wall. This work is the basis of the reliability calculating and program design, for these formulas must be used in anti-slide and anti-overturning safety failure mode in program compiling. On the basis of the known parameters such as wall type, wall dimensions, material parameters, external load, and so on, the program can automatically calculate K0 and Kc, their corresponding failure probability Pf and reliability index β can easily be calculated in later analysis. The research content provide a convenient calculation method, which is used to calculate the Ea and K0 and Kc and Pf and β of the actual retaining walls engineering.

Reliability Analysis of Ultimate Strength of a Capesize Bulk Carrier in Hogging and Alternate Hold Loading Condition

2010 ◽  
Author(s):  
Zhi Shu ◽  
Torgeir Moan
Keyword(s):  
Reliability Analysis ◽  
Ultimate Strength ◽  
Loading Condition ◽  
Structural Reliability ◽  
Bulk Carrier ◽  
Local Loads ◽  
Reliability Method ◽  
Bulk Carriers ◽  
Bending Capacity ◽  
Global And Local

This paper deals with the structural reliability analysis (SRA) of ultimate strength of a Capesize bulk carrier in hogging and alternate hold loading condition (AHL). The ultimate strength in hogging and AHL condition is very important for the safety of bulk carriers since the local loads due to internal cargo loads and external sea pressure can reduce the ultimate bending capacity. In the present paper, the characteristic ultimate bending capacity of the subject bulk carrier is investigated by nonlinear finite element (FE) analysis and the characteristic value of the global and local loads are determined in accordance with the Common Structural Rules for bulk carriers (CSR-BC). The uncertainties associated with the loading capacity and load effects are appropriately modelled. The First Order Reliability Method (FORM) is adopted to calculate the annual probability of failure of this bulk carrier in hogging and AHL condition. The effect of heavy weather avoidance on the global and local loads is also evaluated in the SRA. The results show that the local loads have a significant impact on the failure probability of such vessels in the hogging and AHL condition.

The Effect of Sloshing in Tanks on Motions and Hull Girder Responses of Damaged Vessels

2011 ◽  
Author(s):  
Huirong Jia ◽  
Torgeir Moan
Keyword(s):  
Reliability Analysis ◽  
Structural Reliability ◽  
Bending Moment ◽  
Roll Motion ◽  
Multimodal Approach ◽  
Rectangular Shape ◽  
Hull Girder ◽  
Structural Reliability Analysis ◽  
Oil Tankers

The structural reliability analysis of damaged vessels has up to now commonly been investigated by neglecting the effect of sloshing. This paper deals with the effect of sloshing in tanks on motions and hull girder responses of oil tankers in various damage conditions and represents a part of a study to assess the effect of sloshing on hull girder failure of damaged vessels, The flooded tanks are assumed to have a of rectangular shape and linear multimodal approach is adopted to deal with sloshing. It is concluded that even though the effect of sloshing in tanks on the roll motion of vessels can be neglected in certain damage conditions, the effect of sloshing on the horizontal bending moment cannot be neglected, especially when resonance motion occurs.

scholarly journals Reliability of Buried Pipes in Heterogeneous Soil Subjected to Seismic Loads

2021 ◽  
Vol 11 (1) ◽  
pp. 6708-6713
Author(s):  
H. Benzeguir ◽  
S. M. Elachachi ◽  
D. Nedjar ◽  
M. Bensafi
Keyword(s):  
Structural Reliability ◽  
Limit State ◽  
Bending Moment ◽  
Longitudinal Direction ◽  
Point Of View ◽  
Ultimate Limit State ◽  
Buried Pipe ◽  
Limit States ◽  
Ground Acceleration ◽  
Buried Pipes

Dysfunctions and failures of buried pipe networks, like sewer networks, are studied in this paper from the point of view of structural reliability and heterogeneity of geotechnical conditions in the longitudinal direction. Combined soil spatial variability and Peak Ground Acceleration (PGA) induce stresses and displacements. A model has been developed within the frame of geostatistics and a mechanical description of the soil–structure interaction of a set of buried pipes with connections resting on the soil by a two-parameter model (Pasternak model). Structural reliability analysis is performed considering two limit states: Serviceability Limit State (SLS), related to large "counter slope" in a given pipe, and Ultimate Limit State (ULS), corresponding to bending moment.

scholarly journals Influence of Surcharge Load on the Adjacent Pile Foundation in Coastal Floodplain

2020 ◽  
Vol 3 (1) ◽  
Author(s):  
Hao Zhang ◽  
Kai Sun
Keyword(s):  
Soft Soil ◽  
Three Dimensional ◽  
Bending Moment ◽  
Double Row ◽  
Pile Cap ◽  
Dimensional Finite Element ◽  
Surcharge Load ◽  
Soft Substratum ◽  
And Migration ◽  
Three Dimensional Finite Element

<p><strong> </strong>In this paper, in order to investigate the behavior of existing piles caused by the horizontal and compression deformation of soft substratum due to backfill surcharge on coastal floodplain, three-dimensional finite element models of piles adjacent to surcharge load were established. The deformation and migration law of soft soil was analyzed. The behavior of single pile and double row pile adjacent to surcharge load were studied, in which the influence of surcharge load location, surcharge pressure, pile stiffness, and pile top constraint conditions were considered. The results show that as the position of surcharge load is closer and the surcharge pressure increases, the response (e.g. deformation and bending moment) is more obvious. With the increase of pile stiffness, the range of passive load is increased. The deformation behavior of pile body under different constraints of pile cap is significantly different. The effect of secondary bending moment caused by pile axial force is obvious and cannot be ignored. If there is a thick soft substratum, it is beneficial to improve the behavior of adjacent piles by using cement mixing pile reinforcement.</p>

scholarly journals Research on the Design and Detailing of a Re-constructional High-rise uilding Structure Project Reconstruction

2014 ◽  
Vol 8 (1) ◽  
pp. 450-454 ◽  
Author(s):  
Ling Yuhong ◽  
Lin BiaoYi ◽  
Ke Yu ◽  
Chen QingJun
Keyword(s):  
Reinforced Concrete ◽  
Shear Wall ◽  
Wall Structure ◽  
Strip Foundation ◽  
Reinforced Concrete Frame ◽  
Engineering Structures ◽  
Concrete Frame ◽  
High Rise ◽  
Concrete Pile ◽  
Pile Cap

This paper introduced the reconstruction practice and detailing of a high-rise reinforced concrete frame-shear wall structure. To fully utilize the old structure and meet the requirement of the reconstructed structure, certain measures have been put forward. The enlarging of concrete pile cap and adding strip foundation-beam were used to support the new added shear wall. The reconstruction concept detailing of the roof of basement, the enlarging of the beam or column sections and the application of the inclined column are introduced. The whole structure analysis shows that the reconstructed structure is safe enough to meet all the requirement of the designing code and the settlement observation shows that the deformation of the whole structure in gravity is small. The paper shows the design and detailing of the reconstructed engineering is effective and will be valuable to the similar engineering structures.

Sign in / Sign up

Export Citation Format

Share Document