PAPR Reduction for Improved Efficiency of OFDM Modulation for Next Generation Communication Systems

Author(s):  
Shatrughna Prasad Yadav ◽  
Subhash Chandra Bera

<p>Highly linear power amplifiers are required for transferring   large amount of data for future communication. Orthogonal frequency division multiplexing (OFDM) provides high data rate transmission capability with robustness to radio channel impairments. It has been widely accepted for future communication for different services. But, it suffers from high value of peak-to-average power ratio (PAPR). High value of PAPR drives high power amplifier into its saturation region and causes it to operate in the nonlinear region.  In this paper, comparative study of four different PAPR reduction techniques: clipping and filtering (CF), selective mapping  method (SLM), partial transmit sequence (PTS) and DFT- spread technique  have been done. Mathematical modeling and Matlab simulations have been performed to arrive at the results with 4 QAM modulation format and 1024 number of sub carriers. At 0.01 % of complementary cumulative distribution function (CCDF) significant reduction of 11.3, 3.5, 3.4 and 1.0 dB have been obtained with DFT- spread, SLM, PTS and CF techniques respectively.</p>

Author(s):  
Shatrughna Prasad Yadav ◽  
Subhash Chandra Bera

<p>Highly linear power amplifiers are required for transferring   large amount of data for future communication. Orthogonal frequency division multiplexing (OFDM) provides high data rate transmission capability with robustness to radio channel impairments. It has been widely accepted for future communication for different services. But, it suffers from high value of peak-to-average power ratio (PAPR). High value of PAPR drives high power amplifier into its saturation region and causes it to operate in the nonlinear region.  In this paper, comparative study of four different PAPR reduction techniques: clipping and filtering (CF), selective mapping  method (SLM), partial transmit sequence (PTS) and DFT- spread technique  have been done. Mathematical modeling and Matlab simulations have been performed to arrive at the results with 4 QAM modulation format and 1024 number of sub carriers. At 0.01 % of complementary cumulative distribution function (CCDF) significant reduction of 11.3, 3.5, 3.4 and 1.0 dB have been obtained with DFT- spread, SLM, PTS and CF techniques respectively.</p>


2019 ◽  
Vol 9 (5) ◽  
pp. 852 ◽  
Author(s):  
Lili Hao ◽  
Dongyi Wang ◽  
Yang Tao ◽  
Wenyong Cheng ◽  
Jing Li ◽  
...  

End-to-end learning in optical communication systems is a promising technique to solve difficult communication problems, especially for peak to average power ratio (PAPR) reduction in orthogonal frequency division multiplexing (OFDM) systems. The less complex, highly adaptive hardware and advantages in the analysis of unknown or complex channels make deep learning a valid tool to improve system performance. In this paper, we propose an autoencoder network combined with extended selected mapping methods (ESLM-AE) to reduce the PAPR for the DC-biased optical OFDM system and to minimize the bit error rate (BER). The constellation mapping/de-mapping of the transmitted symbols and the phase factor of each subcarrier are acquired and optimized adaptively by training the autoencoder with a combined loss function. In the loss function, both the PAPR and BER performance are taken into account. The simulation results show that a significant PAPR reduction of more than 10 dB has been achieved by using the ESLM-AE scheme in terms of the complementary cumulative distribution function. Furthermore, the proposed scheme exhibits better BER performance compared to the standard PAPR reduction methods.


2018 ◽  
Vol 39 (4) ◽  
pp. 427-435 ◽  
Author(s):  
Haitham Freag ◽  
Emad S. Hassan ◽  
Sami A. El-Dolil ◽  
Moawad I. Dessouky

Abstract Orthogonal frequency division multiplexing (OFDM) is used with visible light communication (VLC) systems to reduce the effects of inter-symbol interference (ISI) and to achieve communication with high speed of data transmission and huge bandwidth. However, OFDM-based VLC systems suffer from high peak-to-average power ratios (PAPRs). This paper proposes a new hybrid PAPR reduction technique based on signal transformation combined with clipping. The Hadamard transform is used in the proposed technique due to its advantages in reducing the PAPR without affecting the bit error rate (BER) of VLC systems. The optimum clipping threshold at which we can simultaneously reduce the PAPR and improve the BER of VLC systems is also determined. In this paper, we also propose a new OFDM structure based on using discrete cosine transform (DCT) precoding before inverse fast Fourier transform (IFFT) stage to further improve the PAPR reduction capability and BER performance. Several experiments are carried out to test the performance of the proposed technique in terms of complementary cumulative distribution function (CCDF) and the BER. The obtained results show that the proposed technique can simultaneously reduce the PAPR and achieve good BER performance when compared to the original OFDM-based VLC system.


2010 ◽  
Vol 2010 ◽  
pp. 1-10 ◽  
Author(s):  
Mohamad Mroué ◽  
Amor Nafkha ◽  
Jacques Palicot ◽  
Benjamin Gavalda ◽  
Nelly Dagorne

High Peak to Average Power Ratio (PAPR) is a critical issue in multicarrier communication systems using Orthogonal Frequency Division Multiplexing (OFDM), as in the Second Generation Terrestrial Digital Video Broadcasting (DVB-T2) system. This problem can result in large performance degradation due to the nonlinearity of the High Power Amplifier (HPA) or in its low power efficiency. In this paper, we evaluate the performance of different Tone Reservation-based techniques for PAPR reduction in DVB-T2 context. Also, we propose an iterative TR-based technique called “One Kernel One Peak” (OKOP). Simulation results and performance comparison of these techniques in terms of gain in PAPR reduction, mean power variation, and complexity will be given. Finally, we describe the implementation of a PAPR reduction algorithm in the DVB-T2 modulator.


Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1410
Author(s):  
Mohamed Mounir ◽  
Mohamed B. El_Mashade ◽  
Salah Berra ◽  
Gurjot Singh Gaba ◽  
Mehedi Masud

Several high-speed wireless systems use Orthogonal Frequency Division Multiplexing (OFDM) due to its advantages. 5G has adopted OFDM and is expected to be considered beyond 5G (B5G). Meanwhile, OFDM has a high Peak-to-Average Power Ratio (PAPR) problem. Hybridization between two PAPR reduction techniques gains the two techniques’ advantages. Hybrid precoding-companding techniques are attractive as they require small computational complexity to achieve high PAPR reduction gain. Many precoding-companding techniques were introduced to increasing the PAPR reduction gain. However, reducing Bit Error Rate (BER) and out-of-band (OOB) radiation are more significant than increasing PAPR reduction gain. This paper proposes a new precoding-companding technique to better reduce the BER and OOB radiation than previous precoding-companding techniques. Results showed that the proposed technique outperforms all previous precoding-companding techniques in BER enhancement and OOB radiation reduction. The proposed technique reduces the Error Vector Magnitude (EVM) by 15 dB compared with 10 dB for the best previous technique. Additionally, the proposed technique increases high power amplifier efficiency (HPA) by 11.4%, while the best previous technique increased HPA efficiency by 9.8%. Moreover, our proposal achieves PAPR reduction gain better than the most known powerful PAPR reduction technique with a 99% reduction in required computational complexity.


Information ◽  
2020 ◽  
Vol 11 (4) ◽  
pp. 190 ◽  
Author(s):  
Brahim Bakkas ◽  
Reda Benkhouya ◽  
Idriss Chana ◽  
Hussain Ben-Azza

Orthogonal frequency division multiplexing (OFDM) is the key technology used in high-speed communication systems. One of the major drawbacks of OFDM systems is the high peak-to-average power ratio (PAPR) of the transmitted signal. The transmitted signal with a high PAPR requires a very large linear range of the Power Amplifier (PA) on the transmitter side. In this paper, we propose and study a new clipping method named Palm Clipping (Palm date leaf) based on hyperbolic cosine. To evaluate and analyze its performance in terms of the PAPR and Bit Error Rate (BER), we performed some computer simulations by varying the Clipping Ratio (CR) and modulation schemes. The obtained results show that it is possible to achieve a gain of between 7 and 9 dB in terms of PAPR reduction depending on the type of modulation. In addition, comparison with several techniques in terms of PAPR and BER shows that our method is a strong alternative that can be adopted as a PAPR reduction technique for OFDM-based communication systems.


Mathematics ◽  
2020 ◽  
Vol 8 (9) ◽  
pp. 1466
Author(s):  
Imran Baig ◽  
Umer Farooq ◽  
Najam Ul Hasan ◽  
Manaf Zghaibeh ◽  
Varun Jeoti

The next generation communication network (NGCN) is expected to provide higher spectral efficiency, low latency, large throughput and massive machine-to-machine type communications. In this regard, the design of the multi-carrier waveform (MCW) is posing a major research problem for the NGCN. To overcome the stated problem, a lot of state-of-the-art work exists that proposes various MCW alternative to the standard orthogonal frequency division multiplexing (OFDM) waveform. It is true that OFDM was used in a number of real-time communication systems of fourth generation (4G) networks. However, their use in the upcoming fifth generation (5G) network is not very feasible. This is because of the strict requirements of 5G communication systems, which also extend beyond 5G systems; hence rendering the use of OFDM infeasible for newer communication standards. To satisfy the requirements of upcoming communication networks, there is a dire need for MCWs with better flexibility. In this regard, a precoding-based MCW has been proposed. The proposed MCW fulfills the requirements of the NGCN in terms of low peak-to-average power ratio (PAPR), high spectral efficiency and throughput. The MCW proposed in this work uses power-domain multiplexing such as non-orthogonal multiple access (NOMA) and phase rotation by using the selective mapping (SLM) and generalized chirp-like (GCL) precoding of the input signal to the universal filtered multi-carriers (UFMC) modulations. Statistical analysis of the PAPR is presented by using the complementary cumulative distribution function (CCDF). The MATLAB® simulations have been carried out to implement the CCDF of PAPR and results show that a PAPR gain of 5.4 dB is obtained when the proposed waveform is compared with the standard NOMA-UFMC waveform at clip rate of 10−3, using 4-QAM.


2011 ◽  
Vol 145 ◽  
pp. 489-493
Author(s):  
H.A. Hamada ◽  
Usama S. Mohammed ◽  
Moon Kyou Song

Orthogonal Frequency Division Multiplexing (OFDM) technique is becoming the chosen modulation technique for wireless communications. OFDM can provide large data rates with sufficient robustness to radio channel impairments. There are two main drawbacks with OFDM, the peak to average power ratio and its sensitivity to frequency errors. The signal peak to average power ratio reduction solution play an important role to improve performance of OFDM that peak occurs after symbols fed to FFT to produce time domain signal, adding signals up coherently. In This paper we proposes technique to reduce the PAPR using Huffman coding combined with selective interleaver as distortion less scrambling technique. We utilize the amount saved in the total bit rate by the Huffman coding to send the information of the selected interleaver and encoding table for accurate decoding at the receiver without reducing the effective throughput. Performed computer simulations have shown that the proposed scheme outperform the performance of most of the recent PAPR reduction techniques in most cases. By using this method 2.63 dB PAPR reduction is achieved.


Author(s):  
Frank Andrés Eras ◽  
Italo Alexander Carreño ◽  
Thomás Borja ◽  
Diego Javier Reinoso ◽  
Luis Urquiza-Aguiar ◽  
...  

Orthogonal Frequency Division Multiplexing (OFDM) is a technique widely used in today's wireless communication systems due to its ability to combat the effects of multi-path in the signal. However, one of the main limitations of the use of OFDM is its high Peak-to-Average Power Ratio (PAPR), which reduces the efficiency of the OFDM system. The effects of PAPR can produce both out-of-band and in-band radiation, which degrades the signal by increasing the bit error rate (BER), this occurs in both baseband and bandpass sginals. In this document the effect of the PAPR in a OFDM passband signal is analyzed considering the implementation of a High Power Amplifier (HPA) and the Simple Amplitude Predistortion-Orthogonal Pilot Sequences (OPS-SAP) scheme to reduce the PAPR.


Author(s):  
Mohamed Mounir ◽  
Mohamed Bakry El Mashade

High data rate communication systems usually implement Orthogonal Frequency Division Multiplexing (OFDM) to face frequency selectivity. High Peak to Average Power Ratio (PAPR) is an OFDM disadvantage that causes Bit Error Rate (BER) degradation and out-of-band (OOB) radiation when OFDM signal pass through nonlinear Power Amplifier (PA). In order to overcome this problem larger Input Back-Off (IBO) is required. However, large IBO decreases the PA efficiency. PAPR reduction techniques are used to reduce the required IBO, so that PA efficiency is saved. Several PAPR reduction methods are introduced in literature, among them Tone Reservation based on Null Subcarriers (TRNS) is downward compatible version of Tone Reservation (TR) with small excess in the average power and low computational complexity compared to others. As will be shown, TRNS is the best practical one of the four downward compatible techniques. Performance of TRNS is controlled by three parameters; number of peak reduction tones (PRTs), predefined threshold (Amax), and number of iterations (Itr). In order to increase PAPR reduction gain, enhance BER performance, and reduce the required IBO to follow the given power spectral density (PSD), we have to choose the values of these parameters adequately. Results showed that, we have to reduce the threshold value to the average (i.e. Amax =0 dB). Also, we have to increase number of PRTs. However, we have to maintain the spectrum shape. Finally, we have to choose moderate number of iterations (e.g. Itr ≈50), as excessive increase in number of iterations is not useful, especially at high PAPR values.


Sign in / Sign up

Export Citation Format

Share Document