scholarly journals Microruban Dipole Antenna for RFID Applications at 2.45 GHz

2016 ◽  
Vol 6 (6) ◽  
pp. 2891 ◽  
Author(s):  
Loubna Berrich ◽  
Lahbib Zenkouar
Keyword(s):  
Radio Frequency Identification ◽  
Integrated Circuit ◽  
Input Impedance ◽  
Dipole Antenna ◽  
Antenna Design ◽  
Reflection Coefficients ◽  
Ansoft Hfss ◽  
Frequency Identification ◽  
Folded Dipole ◽  
Rfid Applications

<p><span lang="EN-US">Radio Frequency Identification (RFID) is a technology used mainly to identify tagged items or to track their locations. The most used antennas for RFID application are planar dipoles. For antenna design, it is necessary that the antenna has an impedance value equal to the conjugate of the impedance of the integrated circuit CI. To have a good adaptation allowing the maximum power transfer, there are several techniques. In this work we focus to the adaptation technical T-match which is based on the insertion of a second folded dipole in the center of the first dipole. This technique is modeled by an equivalent circuit to calculate the size of the folded dipole to have new input impedance of the antenna equal to the conjugate of the impedance of the IC. We also look to present a conceptual and technological approach of new topologies of linear dipoles. We proceeded to fold at right angles of the radiating strands in order to explore other topologiesof type  L and Z. The interest of this microstrip folded dipole is their effectiveness to achieve coverage of Blind directions. The results obtained by the platform Ansoft HFSS, allowed us to obtain a quasi-uniform radiation patterns and the reflection coefficients that exceed -37 dB.</span></p>

Microruban Dipole Antenna for RFID Applications at 2.45 GHz

2016 ◽  
Vol 6 (6) ◽  
pp. 2891 ◽  
Author(s):  
Loubna Berrich ◽  
Lahbib Zenkouar
Keyword(s):  
Radio Frequency Identification ◽  
Integrated Circuit ◽  
Input Impedance ◽  
Dipole Antenna ◽  
Antenna Design ◽  
Reflection Coefficients ◽  
Ansoft Hfss ◽  
Frequency Identification ◽  
Folded Dipole ◽  
Rfid Applications

<p><span lang="EN-US">Radio Frequency Identification (RFID) is a technology used mainly to identify tagged items or to track their locations. The most used antennas for RFID application are planar dipoles. For antenna design, it is necessary that the antenna has an impedance value equal to the conjugate of the impedance of the integrated circuit CI. To have a good adaptation allowing the maximum power transfer, there are several techniques. In this work we focus to the adaptation technical T-match which is based on the insertion of a second folded dipole in the center of the first dipole. This technique is modeled by an equivalent circuit to calculate the size of the folded dipole to have new input impedance of the antenna equal to the conjugate of the impedance of the IC. We also look to present a conceptual and technological approach of new topologies of linear dipoles. We proceeded to fold at right angles of the radiating strands in order to explore other topologiesof type  L and Z. The interest of this microstrip folded dipole is their effectiveness to achieve coverage of Blind directions. The results obtained by the platform Ansoft HFSS, allowed us to obtain a quasi-uniform radiation patterns and the reflection coefficients that exceed -37 dB.</span></p>

scholarly journals Dual-band Dipole Antenna for 2.45 GHz and 5.8 GHz RFID Tag Application

2015 ◽  
Vol 4 (1) ◽  
pp. 31 ◽  
Author(s):  
Y. Yu ◽  
J. Ni ◽  
Z. Xu
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Input Impedance ◽  
Return Loss ◽  
Dipole Antenna ◽  
Dual Band ◽  
Radiation Characteristics ◽  
Rfid Tag ◽  
Microstrip Patch ◽  
Frequency Identification

In this paper, a dual-band dipole antenna for passive radio frequency identification (RFID) tag application at 2.45 GHz and 5.8 GHz is designed and optimized using HFSS 13. The proposed antenna is composed of a bent microstrip patch and a coupled rectangular microstrip patch. The optimal results of this antenna are obtained by sweeping antenna parameters. Its return losses reach to -18.7732 dB and -18.2514 dB at 2.45 GHz and 5.8 GHz, respectively. The bandwidths (Return loss <=-10 dB) are 2.42~2.50 GHz and 5.77~5.82 GHz. And the relative bandwidths are 3.3% and 0.9%. It shows good impedance, gain, and radiation characteristics for both bands of interest. Besides, the input impedance of the proposed antenna may be tuned flexibly to conjugate-match to that of the IC chip.

scholarly journals Read Range Performance of Microstrip Patch Reader Antenna for UHF RFID Applications

2019 ◽  
Vol 9 (1) ◽  
pp. 3515-3519
Keyword(s):  
Radio Frequency Identification ◽  
Axial Ratio ◽  
Antenna Design ◽  
Uhf Rfid ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
Reader Antenna ◽  
Frequency Identification ◽  
Rfid Applications ◽  
Read Range

This study conducted to compare a read range performance of microstrip patch reader antenna for UHF Radio Frequency Identification (RFID) applications. The circularly polarized reader antenna described in this study are designed to be affixed the polarization mismatch problem between reader antenna and tag antenna. Two truncated at the corner of the ordinary rectangular patch antenna is designed for UHF band (919-923 MHz) which destined for Malaysian systems. Measured results show that the antenna with size of 115*115*1.6 mm have gain antenna of 5.3 dBi, satisfactory 3-dB axial-ratio and reading range of 2m. Read range measurement results of the reader antenna design and tags antenna with the reader are observed and analysed to validate the practical performance. The reader antenna design delivered in this study areappropriate to UHF RFID applications.

Design of a Novel Tag Antenna Mountable on the Side of Cigarette Carton

2012 ◽  
Vol 236-237 ◽  
pp. 970-975
Author(s):  
Qian Cao ◽  
Jian Xiong Li ◽  
Lu Hong Mao
Keyword(s):  
Radio Frequency Identification ◽  
Low Cost ◽  
Antenna Design ◽  
The Finite Element Method ◽  
Rfid Tag ◽  
Conductive Material ◽  
Radiation Properties ◽  
Frequency Identification ◽  
Rfid Applications ◽  
Read Range

The growing interest of Radio Frequency Identification (RFID) applications has seen problems emerging in the identification of object, especially those that contain conductive material. A low-cost novel tag antenna for a RFID tag which could be mounted on the side of cigarette carton is proposed in this paper. Since the cigarette carton contains conductive material, radiation properties of the antenna could be affected significantly. The specific parameters of the antenna were optimized based on the Finite Element Method (FEM). The performance of the tag antenna design affixed to the cigarette carton containing metallic foil is verified with read range measurements. The proposed antenna has a simulated bandwidth from 863 MHz to 943 MHz ( < -10 dB) for conjugate-matching with a commercial tag chip.

A new compact CPW-Fed dual-band monopole antenna for RFID applications

2017 ◽  
Vol 8 (1) ◽  
pp. 69 ◽  
Author(s):  
Ahmed Elhamraoui ◽  
El Hassan Abdelmounim ◽  
Jamal Zbitou ◽  
Ahmed Errkik ◽  
Hamid Bennis ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Radio Frequency Identification ◽  
Coplanar Waveguide ◽  
Monopole Antenna ◽  
Antenna Design ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Microwave Integrated Circuits ◽  
Frequency Identification ◽  
Rfid Applications

<p>This paper presents a study of a new dual-band monopole antenna fed by a Coplanar Waveguide (CPW) line suitable for Radio Frequency Identification (RFID) applications especially designed for RFID readers and covering free ISM bands of 2.45GHz and 5.8GHz. The proposed antenna benefits from the advantages of the CPW line to simplify the structure of the antenna into a single metallic level, by consequent making it easier for integration with microwave integrated circuits. The simulation of the antenna was carried out using ADS from Agilent technologies and CST Microwave Studio electromagnetic solvers. A good impedance bandwidth of 500MHz is achieved in measurement (from 2.1GHz to 2.6GHz for the lower band), while the upper band covers 800MHz (from 5.2GHz to 6GHz). Details of the proposed antenna design and both simulated and experimental results are described and discussed.<strong><em></em></strong></p>

scholarly journals RFID-Based E-Plate with Slot-Dipole Antenna Design and Roadside Interrogator Deployment

2014 ◽  
Vol 8 (1) ◽  
pp. 27-33
Author(s):  
Wenjing Zhao ◽  
Xunguang Ju ◽  
Shuangjiang Wu
Keyword(s):  
Radio Frequency Identification ◽  
High Gain ◽  
Dipole Antenna ◽  
Vehicle Tracking ◽  
Antenna Design ◽  
Impedance Bandwidth ◽  
License Plate ◽  
Beam Radiation ◽  
Frequency Identification ◽  
Plate Antenna

For some scenarios of vehicle tracking and identification, it is desired that radio-frequency identification (RFID) interrogators can be deployed on roadside lampposts or high poles. In order to meet this requirement, active RFID electronic license plate (e-plate) with a slot-dipole antenna is proposed to provide up-tilted beams. Numerical simulations demonstrate that the proposed e-plate antenna has desired impedance bandwidth, high gain and multi-beam radiation pattern as required at 2.45 GHz RFID band. In addition, the estimated read range of the proposed e-plate meets the requirement of RFID system, and deployment of interrogator on roadside lamppost or high pole is analyzed.

scholarly journals Compact Tri-band Bandpass Filter Based on Asymmetric Step Impedance Resonators for WiMAX and RFID Systems

2021 ◽  
Vol 21 (4) ◽  
pp. 316-321
Author(s):  
Abdul Basit ◽  
Muhammad Irfan Khattak ◽  
Ayman Althuwayb ◽  
Jamel Nebhen
Keyword(s):  
Radio Frequency Identification ◽  
Bandpass Filter ◽  
Coupled Resonators ◽  
Simple Method ◽  
Rfid Systems ◽  
Fundamental Frequencies ◽  
Half Wavelength ◽  
Frequency Identification ◽  
One Step ◽  
Rfid Applications

In this article, a simple method is developed to design a highly miniaturized tri-band bandpass filter (BPF) utilizing two asymmetric coupled resonators with one step discontinuity and one uniform impedance resonator (UIR) for worldwide interoperability for microwave access (WiMAX) and radio frequency identification (RFID) applications. The first and second passbands located at 3.7 GHz and 6.6 GHz are achieved through two asymmetric coupled step impedance resonators (SIRs), while the third passband, centered at 9 GHz, is achieved using a half-wavelength UIR, respectively. The fundamental frequencies of this BPF are implemented by tuning the physical length ratio (α) and impedance ratio (R) of the asymmetric SIRs. The proposed filter is designed and fabricated with a circuit dimension of 13.69 mm × 25 mm (0.02 λg × 0.03 λg), where λg represents the guided wavelength at the first passband. The experimental and measured results are provided with good matching.

Reliability evaluation of wearable radio frequency identification tags: Design and fabrication of a two-part textile antenna

2018 ◽  
Vol 89 (4) ◽  
pp. 560-571 ◽  
Author(s):  
Xiaochen Chen ◽  
Leena Ukkonen ◽  
Johanna Virkki
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Integrated Circuit ◽  
High Performance ◽  
Cyclic Strain ◽  
Moist Environment ◽  
Frequency Identification ◽  
Identification Tags ◽  
Cost Efficient ◽  
The One

Passive radio frequency identification-based technology is a convincing approach to the achievement of versatile energy- and cost-efficient wireless platforms for future wearable applications. By using two-part antenna structures, the antenna-electronics interconnections can remain non-stressed, which can significantly improve the reliability of the textile-embedded wireless components. In this article, we describe fabrication of two-part stretchable and non-stretchable passive ultra-high frequency radio frequency identification textile tags using electro-textile and embroidered antennas, and test their reliability when immersed as well as under cyclic strain. The results are compared to tags with traditional one-part dipole antennas fabricated from electro-textiles and by embroidery. Based on the results achieved, the initial read ranges of the two-part antenna tags, around 5 m, were only slightly shorter than those of the one-part antenna tags. In addition, the tag with two-part antennas can maintain high performance in a moist environment and during continuous stretching, unlike the one-part antenna tag where the antenna-integrated circuit attachment is under stress.

scholarly journals Dual-Band Monopole Antenna for RFID Applications

2019 ◽  
Vol 11 (2) ◽  
pp. 31 ◽  
Author(s):  
Naser Ojaroudi Parchin ◽  
Haleh Jahanbakhsh Basherlou ◽  
Raed Abd-Alhameed ◽  
James Noras
Keyword(s):  
Radio Frequency Identification ◽  
Monopole Antenna ◽  
Dual Band ◽  
Rfid Technology ◽  
Antenna Structure ◽  
The Past ◽  
Frequency Identification ◽  
Rfid Applications ◽  
Significant Attention ◽  
Good Agreement

Over the past decade, radio-frequency identification (RFID) technology has attracted significant attention and become very popular in different applications, such as identification, management, and monitoring. In this study, a dual-band microstrip-fed monopole antenna has been introduced for RFID applications. The antenna is designed to work at the frequency ranges of 2.2–2.6 GHz and 5.3–6.8 GHz, covering 2.4/5.8 GHz RFID operation bands. The antenna structure is like a modified F-shaped radiator. It is printed on an FR-4 dielectric with an overall size of 38 × 45 × 1.6 mm3. Fundamental characteristics of the antenna in terms of return loss, Smith Chart, phase, radiation pattern, and antenna gain are investigated and good results are obtained. Simulations have been carried out using computer simulation technology (CST) software. A prototype of the antenna was fabricated and its characteristics were measured. The measured results show good agreement with simulations. The structure of the antenna is planar, simple to design and fabricate, easy to integrate with RF circuit, and suitable for use in RFID systems.

Structure optimization of an ultrahigh frequency radio frequency identification tag thread based on the normal mode helix dipole antenna

2020 ◽  
pp. 004051752094890
Author(s):  
Yong Zhang ◽  
Jiyong Hu ◽  
Xiong Yan ◽  
Xudong Yang
Keyword(s):  
Resonant Frequency ◽  
Normal Mode ◽  
Radio Frequency Identification ◽  
Dipole Antenna ◽  
Uhf Rfid ◽  
Simulation Experiments ◽  
Rfid Tag ◽  
Helical Pitch ◽  
Frequency Identification ◽  
Linear Dipole

This paper describes the design of a novel ultrahigh frequency radio frequency identification (UHF RFID) tag thread that mainly consisted of the common yarn and the normal mode helix dipole antenna. The linear dipole antenna for the UHF RFID tag thread was too long to miniaturize the tag. In order to maximize the read performance and miniaturize the size of the tag, the basic antenna structure parameters, such as the helical pitch and single arm length, were optimized by analyzing the radiation parameter S11 of the normal mode helix dipole antenna based on simulation experiments. The simulation experiments started with optimizing the single arm length to obtain the minimum of the S11 parameter at resonant frequency, then the helical pitch was further optimized to limit the resonant frequency to the UHF range. The simulation results showed the resonant frequency rises with an increase of helical pitch and declines with an increase of single arm length. Furthermore, a series of UHF RFID tag threads with good performance from the simulation cases were prepared, and the performance of the optimized tag was validated. Generally, the UHF RFID tag thread with optimized helix dipole antenna could reduce the axial length of the tag by 57% and improve the reading range by 500%, and its performance was greatly superior to that of the UHF RFID tag thread with the classical linear dipole antenna.

Sign in / Sign up

Export Citation Format

Share Document