A new compact CPW-Fed dual-band monopole antenna for RFID applications

2017 ◽  
Vol 8 (1) ◽  
pp. 69 ◽  
Author(s):  
Ahmed Elhamraoui ◽  
El Hassan Abdelmounim ◽  
Jamal Zbitou ◽  
Ahmed Errkik ◽  
Hamid Bennis ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Radio Frequency Identification ◽  
Coplanar Waveguide ◽  
Monopole Antenna ◽  
Antenna Design ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Microwave Integrated Circuits ◽  
Frequency Identification ◽  
Rfid Applications

<p>This paper presents a study of a new dual-band monopole antenna fed by a Coplanar Waveguide (CPW) line suitable for Radio Frequency Identification (RFID) applications especially designed for RFID readers and covering free ISM bands of 2.45GHz and 5.8GHz. The proposed antenna benefits from the advantages of the CPW line to simplify the structure of the antenna into a single metallic level, by consequent making it easier for integration with microwave integrated circuits. The simulation of the antenna was carried out using ADS from Agilent technologies and CST Microwave Studio electromagnetic solvers. A good impedance bandwidth of 500MHz is achieved in measurement (from 2.1GHz to 2.6GHz for the lower band), while the upper band covers 800MHz (from 5.2GHz to 6GHz). Details of the proposed antenna design and both simulated and experimental results are described and discussed.<strong><em></em></strong></p>

scholarly journals Dual-Band Monopole Antenna for RFID Applications

2019 ◽  
Vol 11 (2) ◽  
pp. 31 ◽  
Author(s):  
Naser Ojaroudi Parchin ◽  
Haleh Jahanbakhsh Basherlou ◽  
Raed Abd-Alhameed ◽  
James Noras
Keyword(s):  
Radio Frequency Identification ◽  
Monopole Antenna ◽  
Dual Band ◽  
Rfid Technology ◽  
Antenna Structure ◽  
The Past ◽  
Frequency Identification ◽  
Rfid Applications ◽  
Significant Attention ◽  
Good Agreement

Over the past decade, radio-frequency identification (RFID) technology has attracted significant attention and become very popular in different applications, such as identification, management, and monitoring. In this study, a dual-band microstrip-fed monopole antenna has been introduced for RFID applications. The antenna is designed to work at the frequency ranges of 2.2–2.6 GHz and 5.3–6.8 GHz, covering 2.4/5.8 GHz RFID operation bands. The antenna structure is like a modified F-shaped radiator. It is printed on an FR-4 dielectric with an overall size of 38 × 45 × 1.6 mm3. Fundamental characteristics of the antenna in terms of return loss, Smith Chart, phase, radiation pattern, and antenna gain are investigated and good results are obtained. Simulations have been carried out using computer simulation technology (CST) software. A prototype of the antenna was fabricated and its characteristics were measured. The measured results show good agreement with simulations. The structure of the antenna is planar, simple to design and fabricate, easy to integrate with RF circuit, and suitable for use in RFID systems.

scholarly journals Bandwidth Enhancement Technique of the Meandered Monopole Antenna

2015 ◽  
Vol 2015 ◽  
pp. 1-6
Author(s):  
Chien-Jen Wang ◽  
Dai-Heng Hsieh
Keyword(s):  
Communication Systems ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Matching Condition ◽  
Resonant Mode ◽  
Monopole Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Feeding Structure

A small dual-band monopole antenna with coplanar waveguide (CPW) feeding structure is presented in this paper. The antenna is composed of a meandered monopole, an extended conductor tail, and an asymmetrical ground plane. Tuning geometrical structure of the ground plane excites an additional resonant frequency band and thus enhances the impedance bandwidth of the meandered monopole antenna. Unlike the conventional monopole antenna, the new resonant mode is excited by a slot trace of the CPW transmission line. The radiation performance of the slot mode is as similar as that of the monopole. The parametrical effect of the size of the one-side ground plane on impedance matching condition has been derived by the simulation. The measured impedance bandwidths, which are defined by the reflection coefficient of −6 dB, are 186 MHz (863–1049 MHz, 19.4%) at the lower resonant band and 1320 MHz (1490–2810 MHz, 61.3%) at the upper band. From the results of the reflection coefficients of the proposed monopole antenna, the operated bandwidths of the commercial wireless communication systems, such as GSM 900, DCS, IMT-2000, UMTS, WLAN, LTE 2300, and LTE 2500, are covered for uses.

scholarly journals Microruban Dipole Antenna for RFID Applications at 2.45 GHz

2016 ◽  
Vol 6 (6) ◽  
pp. 2891 ◽  
Author(s):  
Loubna Berrich ◽  
Lahbib Zenkouar
Keyword(s):  
Radio Frequency Identification ◽  
Integrated Circuit ◽  
Input Impedance ◽  
Dipole Antenna ◽  
Antenna Design ◽  
Reflection Coefficients ◽  
Ansoft Hfss ◽  
Frequency Identification ◽  
Folded Dipole ◽  
Rfid Applications

<p><span lang="EN-US">Radio Frequency Identification (RFID) is a technology used mainly to identify tagged items or to track their locations. The most used antennas for RFID application are planar dipoles. For antenna design, it is necessary that the antenna has an impedance value equal to the conjugate of the impedance of the integrated circuit CI. To have a good adaptation allowing the maximum power transfer, there are several techniques. In this work we focus to the adaptation technical T-match which is based on the insertion of a second folded dipole in the center of the first dipole. This technique is modeled by an equivalent circuit to calculate the size of the folded dipole to have new input impedance of the antenna equal to the conjugate of the impedance of the IC. We also look to present a conceptual and technological approach of new topologies of linear dipoles. We proceeded to fold at right angles of the radiating strands in order to explore other topologiesof type  L and Z. The interest of this microstrip folded dipole is their effectiveness to achieve coverage of Blind directions. The results obtained by the platform Ansoft HFSS, allowed us to obtain a quasi-uniform radiation patterns and the reflection coefficients that exceed -37 dB.</span></p>

scholarly journals A Novel Compact CP Antenna with Wide Axial Ratio Bandwidth for Worldwide UHF RFID Handheld Reader

2019 ◽  
Vol 2019 ◽  
pp. 1-9 ◽  
Author(s):  
Waleed Abdelrahim Ahmed ◽  
Feng Quanyuan
Keyword(s):  
Radio Frequency Identification ◽  
Low Cost ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Plane Layer ◽  
Impedance Bandwidth ◽  
Uhf Rfid ◽  
Frequency Identification ◽  
The Right

This study presents a novel compact circularly polarized antenna for universal ultrahigh-frequency (UHF) radio-frequency identification (RFID) handheld reader applications. The antenna is composed of a coplanar waveguide (CPW) L-shaped feedline mounted at the right edge of the square slot at the bottom of the ground plane to realize a circular polarization; a horizontal stub protruded from the right side of the square slot towards the slot centre, and a vertical stub is mounted at the lower left of the square slot. The designed antenna printed on one ground plane layer of a low-cost FR4 substrate with an overall size of 120×120×1.6 mm3. The measurement results show indicate that the fabricated antenna achieves a wide axial ratio (AR) bandwidth of 460 MHz (818–1278 MHz), wide impedance bandwidth of 54.6% (630–1103 MHz), and a measured peak gain of 4.0 dBi. The proposed antenna is a good candidate for compact universal UHF RFID handheld reader applications (840–960 MHz).

Design of Spiral Square Patch Antenna for Wireless Communications

2019 ◽  
pp. 131-141
Author(s):  
Ketavath Kumar Naik
Keyword(s):  
Radio Frequency Identification ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Conformal Antenna ◽  
Directional Radiation ◽  
Frequency Identification

The kapton polyimide material is considered to design conformal antenna with spiral square for radio frequency identification (RFID) and wireless local area network (WLAN) applications. In this chapter, the analysis and investigation has been carried out with spiral square techniques using coplanar waveguide (CPW) feed. The proposed antenna operates at 5.8 GHz with impedance bandwidth of 170 MHz (5.73 - 5.9 GHz) with return loss -25.6 dB and gain is 2.4 dBi. The proposed antenna has considered with different bending angles for investigating the conformal characteristics due to flexibility of the material. These results are presented for omni-directional radiation patterns.

Dual-Band Printed Monopole Antenna Design

2020 ◽  
Vol 35 (10) ◽  
pp. 1169-1175
Author(s):  
Hassan Ragheb ◽  
Shady El-Aal ◽  
Afaf Saad ◽  
Ahmed Zaalouk
Keyword(s):  
Radio Frequency Identification ◽  
Design Procedure ◽  
High Gain ◽  
Monopole Antenna ◽  
Dual Band ◽  
Face To Face ◽  
Circular Patch ◽  
Frequency Identification ◽  
Printed Monopole Antenna ◽  
Printed Monopole

Design procedure of a high gain dual-band printed monopole antenna, resonating at 2.4 GHz and 5.5 GHz, is presented. The proposed design meets the specifications required by WI-FI, WIMAX and radio frequency identification (RFID) reader applications. Our design utilizes Rogers RT/Duroid 5880(tm) substrate, and the major radiation element is an annular circular patch shape. The design was improved by adding a face-to-face fork shape metal inside the annular circular patch. The antenna feed consists of a microstrip line and a slotted transformer section for matching purpose. A prototype of the proposed antenna was fabricated and the measurements of the return loss and antenna radiation pattern were performed. The comparison between the results obtained from the simulation and the measurements showed an excellent agreement.

scholarly journals A Novel Broadband Monopole Antenna with T-Slot, CB-CPW, Parasitic Stripe and Heart-Shaped Slice for 5G Applications

Sensors ◽  
2020 ◽  
Vol 20 (24) ◽  
pp. 7002
Author(s):  
Zhendong Ding ◽  
Hao Wang ◽  
Shifei Tao ◽  
Dan Zhang ◽  
Chunyu Ma ◽  
...  
Keyword(s):  
Radio Frequency Identification ◽  
High Efficiency ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Monopole Antenna ◽  
Maximum Efficiency ◽  
Area Network ◽  
Frequency Identification

This paper presents a novel broadband monopole antenna that was equipped with a bottom semicircle ground structure, a parasitic patch, a T-shaped slot, s transmission line, a parasitic strip, heart-shaped slices and a coplanar waveguide (CPW). The simulation results revealed that the proposed design had a relatively high return loss, a wide bandwidth and high efficiency. A prototype of the proposed antenna with an overall size of 0.94 λ0 × 0.94 λ0 × 0.02 λ0 (λ0 is the free-space wavelength) was fabricated and measured. The measurement results showed that the prototype had a bandwidth of 4.02 GHz (4.69–8.71 GHz) and a relative bandwidth of 60%. Besides, the maximum gain was 3.31 dBi and the maximum efficiency was 91.1% in the range of 5 to 8.5 GHz. Furthermore, it was found that the prototype almost achieved omnidirectional radiation. Its operating frequency band covered those of industrial scientific medical (ISM) (5.725–5.850 GHz), the radio frequency identification (RFID) (5.8 GHz) and the wireless local area network (WLAN) (5.15–5.25 GHz and 5.725–5.825 GHz).

scholarly journals Unidirectional Dual-Band CPW-Fed Antenna Loaded with an AMC Reflector

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Qun Luo ◽  
Huiping Tian ◽  
Zhitong Huang ◽  
Xudong Wang ◽  
Zheng Guo ◽  
...  
Keyword(s):  
Radio Frequency Identification ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Dielectric Substrate ◽  
Dual Band ◽  
Magnetic Conductor ◽  
Suitable Candidate ◽  
Gain Enhancement ◽  
Low Profile ◽  
Frequency Identification

A unidirectional dual-band coplanar waveguide fed antenna (DB-CPWFA) loaded with a reflector is presented in this paper. The reflector is made of an electric ground plane, a dielectric substrate, and artificial magnetic conductor (AMC) which shows an effective dual operational bandwidth. Then, the closely spaced AMC reflector is employed under the DB-DPWFA for performance improvement including unidirectional radiation, low profile, gain enhancement, and higher front-to-back (F/B) ratio. The final antenna design exhibits an 8% and 13% impedance bandwidths for 2.45 GHz and 5.8 GHz frequency regions, respectively. The overall gain enhancement of about 4 dB is achieved. The F/B ratio is approximate to 20 dB with a 16 dB improvement. The measured results are inconsistent with the numerical values. The presented design is a suitable candidate for radio frequency identification (RFID) reader application.

Sign in / Sign up

Export Citation Format

Share Document