scholarly journals Electrical and environmental parameters of the performance of polymer solar cells based on P3HT:PCBM

2021 ◽  
Vol 12 (3) ◽  
pp. 1772
Author(s):  
El Hadi Chahid ◽  
Mohamed Lotfi ◽  
Osama Lotfi ◽  
My Abdelaziz Koumina ◽  
Rodolphe Heyd ◽  
...  
Keyword(s):  
Solar Cells ◽  
Polymer Solar Cells ◽  
Acid Methyl Ester ◽  
Environmental Parameters ◽  
Energy Conversion Efficiency ◽  
Bandgap Energy ◽  
Cell Efficiency ◽  
Different Temperatures ◽  
Influence Of Temperature On ◽  
The One

<p>The electrical and environmental parameters of polymer solar cells (PSC) provide important information on their performance. In the present article we study the influence of temperature on the voltage-current (I-V) characteristic at different temperatures from 10 °C to 90 °C, and important parameters like bandgap energy Eg, and the energy conversion efficiency η. The one-diode electrical model, normally used for semiconductor cells, has been tested and validated for the polemeral junction. The PSC used in our study are formed by the poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C61-butyric acid methyl ester (PCBM). Our technique is based on the combination of two steps; the first use the Least Mean Squares (LMS) method while the second use the Newton-Raphson algorithm. The found results are compared to other recently published works, they show that the developed approach is very accurate. This precision is proved by the minimal values of statistical errors (RMSE) and the good agreement between both the experimental data and the I-V simulated curves. The obtained results show a clear and a monotonic dependence of the cell efficiency on the studied parameters.</p>

Polymer solar cells: screen-printing as a novel deposition technique

2004 ◽  
Vol 836 ◽  
Author(s):  
Tom Aernouts ◽  
Peter Vanlaeke ◽  
Jef Poortmans ◽  
Paul Heremans
Keyword(s):  
Solar Cells ◽  
Screen Printing ◽  
Polymer Solar Cells ◽  
Acid Methyl Ester ◽  
Energy Conversion Efficiency ◽  
Solution Viscosity ◽  
Deposition Technique ◽  
Active Layers ◽  
Donor Acceptor ◽  
Suitable Technique

ABSTRACTScreen-printing is studied as deposition technique for conjugated material based layers. Photovoltaics based on the principle of bulk donor-acceptor heterojunction are tested using a blend of poly(2-methoxy-5-(2'-ethyl-hexyloxy)-1, 4-phenylene vinylene) (MEH-PPV) mixed with the C60-derivative (6, 6)-phenyl C61-butyric acid methyl ester (PCBM). First, different solution concentrations of the donor MEH-PPV material and of the blend are subjected to rheology measurements. Addition of the acceptor (PCBM) to a donor material based solution induces a decrease of the solution viscosity. However, the overall flow behaviour of the blend remains similar to that of the MEH-PPV based solution. Secondly, it is shown that specific printer settings have to be used to obtain active layers that are suitable for opto-electronic applications. Finally, devices with an overall energy conversion efficiency of 1.25% under standardized simulated solar illumination (AM1.5G; 100mW/cm2) have been obtained showing that screen-printing can be a suitable technique for the deposition of the active layer of polymer solar cells.

scholarly journals Optimization of Sb2S3 Nanocrystal Concentrations in P3HT: PCBM Layers to Improve the Performance of Polymer Solar Cells

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2152
Author(s):  
E. M. Mkawi ◽  
Y. Al-Hadeethi ◽  
R. S. Bazuhair ◽  
A. S. Yousef ◽  
E. Shalaan ◽  
...  
Keyword(s):  
Solar Cells ◽  
Doping Concentration ◽  
Polymer Solar Cells ◽  
Energy Levels ◽  
Acid Methyl Ester ◽  
Visible Absorption ◽  
Block Polymer ◽  
Coating Method ◽  
Electronic Parameters ◽  
P Type

In this study, polymer solar cells were synthesized by adding Sb2S3 nanocrystals (NCs) to thin blended films with polymer poly(3-hexylthiophene)(P3HT) and [6,6]-phenyl-C61-butyric-acid-methyl-ester (PCBM) as the p-type material prepared via the spin-coating method. The purpose of this study is to investigate the dependence of polymer solar cells’ performance on the concentration of Sb2S3 nanocrystals. The effect of the Sb2S3 nanocrystal concentrations (0.01, 0.02, 0.03, and 0.04 mg/mL) in the polymer’s active layer was determined using different characterization techniques. X-ray diffraction (XRD) displayed doped ratio dependences of P3HT crystallite orientations of P3HT crystallites inside a block polymer film. Introducing Sb2S3 NCs increased the light harvesting and regulated the energy levels, improving the electronic parameters. Considerable photoluminescence quenching was observed due to additional excited electron pathways through the Sb2S3 NCs. A UV–visible absorption spectra measurement showed the relationship between the optoelectronic properties and improved surface morphology, and this enhancement was detected by a red shift in the absorption spectrum. The absorber layer’s doping concentration played a definitive role in improving the device’s performance. Using a 0.04 mg/mL doping concentration, a solar cell device with a glass /ITO/PEDOT:PSS/P3HT-PCBM: Sb2S3:NC/MoO3/Ag structure achieved a maximum power conversion efficiency of 2.72%. These Sb2S3 NCs obtained by solvothermal fabrication blended with a P3HT: PCBM polymer, would pave the way for a more effective design of organic photovoltaic devices.

Thermal influence on the embryonic development and hatching rate of the flameback pygmy angelfish Centropyge aurantonotus eggs

Zygote ◽  
2019 ◽  
Vol 28 (1) ◽  
pp. 80-82
Author(s):  
Raoani Cruz Mendonça ◽  
Sarah Pittigliani Ikebata ◽  
Sérgio Leandro Araújo-Silva ◽  
João Vitor Azevedo Manhães ◽  
Mônica Yumi Tsuzuki
Keyword(s):  
Embryonic Development ◽  
Incubation Temperature ◽  
Abiotic Factors ◽  
Environmental Parameters ◽  
Hatching Rate ◽  
Influence Of Temperature ◽  
Different Temperatures ◽  
Influence Of Temperature On ◽  
Thermal Influence ◽  
Hatching Rates

SummaryThe flameback pygmy angelfish Centropyge aurantonotus, highly appreciated and valued by the aquarium market, is heavily harvested and traded. Temperature is one of the abiotic factors that has the most influence on fish development, especially in the early stages of life. For captive production, it is essential to know the appropriate environmental parameters for each species. In this sense, this study aimed to evaluate the influence of temperature on the embryonic development and hatching rates of C. aurantonotus incubated at six different temperatures (20, 22, 24, 26, 28, 30°C). Embryonic development events were very similar in terms of morphological and chronological characteristics compared with other species of the genus Centropyge. Incubation time was inversely proportional to temperature. The treatment at 22°C required twice the time of that required by 30°C treatment for hatching to occur. The best incubation temperature range was 24–28°C. Values below 22°C and at 30°C showed lower hatching rates compared with other treatments. Based on these results, the recommended temperature at which to incubate C. aurantonotus eggs is between 24–28°C.

scholarly journals Molecular Engineering Enhances the Charge Carriers Transport in Wide Band-Gap Polymer Donors Based Polymer Solar Cells

Molecules ◽  
2020 ◽  
Vol 25 (18) ◽  
pp. 4101
Author(s):  
Siyang Liu ◽  
Shuwang Yi ◽  
Peiling Qing ◽  
Weijun Li ◽  
Bin Gu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Band Gap ◽  
High Efficiency ◽  
Polymer Solar Cells ◽  
Acid Methyl Ester ◽  
Wide Band ◽  
Molecular Engineering ◽  
Wide Band Gap ◽  
Photovoltaic Properties ◽  
Solvent Vapor

The novel and appropriate molecular design for polymer donors are playing an important role in realizing high-efficiency and high stable polymer solar cells (PSCs). In this work, four conjugated polymers (PIDT-O, PIDTT-O, PIDT-S and PIDTT-S) with indacenodithiophene (IDT) and indacenodithieno [3,2-b]thiophene (IDTT) as the donor units, and alkoxy-substituted benzoxadiazole and benzothiadiazole derivatives as the acceptor units have been designed and synthesized. Taking advantages of the molecular engineering on polymer backbones, these four polymers showed differently photophysical and photovoltaic properties. They exhibited wide optical bandgaps of 1.88, 1.87, 1.89 and 1.91 eV and quite impressive hole mobilities of 6.01 × 10−4, 7.72 × 10−4, 1.83 × 10−3, and 1.29 × 10−3 cm2 V−1 s−1 for PIDT-O, PIDTT-O, PIDT-S and PIDTT-S, respectively. Through the photovoltaic test via using PIDT-O, PIDTT-O, PIDT-S and PIDTT-S as donor materials and [6,6]-phenyl-C-71-butyric acid methyl ester (PC71BM) as acceptor materials, all the PSCs presented the high open circuit voltages (Vocs) over 0.85 V, whereas the PIDT-S and PIDTT-S based devices showed higher power conversion efficiencies (PCEs) of 5.09% and 4.43%, respectively. Interestingly, the solvent vapor annealing (SVA) treatment on active layers could improve the fill factors (FFs) extensively for these four polymers. For PIDT-S and PIDTT-S, the SVA process improved the FFs exceeding 71%, and ultimately the PCEs were increased to 6.05%, and 6.12%, respectively. Therefore, this kind of wide band-gap polymers are potentially candidates as efficient electron-donating materials for constructing high-performance PSCs.

scholarly journals Substrate Temperature Effect on Charge Transport Performance of ZnO Electron Transport Layer Prepared by a Facile Ultrasonic Spray Pyrolysis in Polymer Solar Cells

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Jiang Cheng ◽  
Rong Hu ◽  
Qi Wang ◽  
Chengxi Zhang ◽  
Zhou Xie ◽  
...  
Keyword(s):  
Solar Cells ◽  
Spray Pyrolysis ◽  
Polymer Solar Cells ◽  
Acid Methyl Ester ◽  
Ultrasonic Spray Pyrolysis ◽  
Ammonia Solution ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Zno Films ◽  
Ultrasonic Spray

A novel ultrasonic spray pyrolysis for high-quality ZnO films based on zinc-ammonia solution was achieved in air. To investigate the structural and optical properties as well as the performance of polymer solar cells (PSCs), ZnO films at different substrate temperatures and thicknesses were prepared. The performance of poly(3-hexylthiophene):[6,6]-phenyl C61-butyric acid methyl ester (P3HT:PCBM) based PSC was found to be improved due to the ZnO films. The crystal structure and roughness of the ZnO films fabricated at different temperatures were found to affect the performance of PSCs. The optimized power conversion efficiency was found to be maximum for PSCs with ZnO films prepared at 200°C. The growth process of these ZnO films is very simple, cost-effective, and compatible for larger-scale PSC preparation. The precursor used for spray pyrolysis is environmentally friendly and helps to achieve ZnO film preparation at a relative low temperature.

scholarly journals Ultrafast Charge Generation Enhancement in Nanoscale Polymer Solar Cells with DIO Additive

Nanomaterials ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2174
Author(s):  
Tongchao Shi ◽  
Zeyu Zhang ◽  
Xia Guo ◽  
Zhengzheng Liu ◽  
Chunwei Wang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Vibrational Relaxation ◽  
Transient Absorption ◽  
Polymer Solar Cells ◽  
Acid Methyl Ester ◽  
Free Charge ◽  
Exciton Dissociation ◽  
Charge Generation ◽  
Carrier Generation ◽  
Acid Methyl

We study the ultrafast photoexcitation dynamics in PBDTTT-C-T (P51, poly(4,8-bis(5-(2-ethylhexyl)-thiophene-2-yl)-benzo[1,2-b:4,5-b′]dithiophene-alt-alkylcarbonyl-thieno[3,4-b]thiophene)) film (~100 nm thickness) and PBDTTT-C-T:PC71BM (P51:PC71BM, phenyl-C71-butyric-acid-methyl ester) nanostructured blend (∼100 nm thickness) with/without DIO(1,8-diiodooctane) additives with sub-10 fs transient absorption (TA). It is revealed that hot-exciton dissociation and vibrational relaxation could occur in P51 with a lifetime of ~160 fs and was hardly affected by DIO. However, the introduction of DIO in P51 brings a longer lifetime of polaron pairs, which could make a contribution to photocarrier generation. In P51:PC71BM nanostructured blends, DIO could promote the Charge Transfer (CT) excitons and free charges generation with a ~5% increasement in ~100 fs. Moreover, the dissociation of CT excitons is faster with DIO, showing a ~5% growth within 1 ps. The promotion of CT excitons and free charge generation by DIO additive is closely related with active layer nanomorphology, accounting for Jsc enhancement. These results reveal the effect of DIO on carrier generation and separation, providing an effective route to improve the efficiency of nanoscale polymer solar cells.

Cost Impacts of Anti-Reflection Coatings on Silicon Solar Cells

1996 ◽  
Vol 426 ◽  
Author(s):  
David C. Wong ◽  
Art Waugh
Keyword(s):  
Solar Cells ◽  
Conversion Efficiency ◽  
Photovoltaic Effect ◽  
Golden Rule ◽  
Energy Conversion Efficiency ◽  
Silicon Solar Cells ◽  
Production Volume ◽  
Solar Cell Efficiency ◽  
Cell Efficiency ◽  
The Cost

AbstractDespite the early discovery of the Photovoltaic effect by Bechquerel almost 107 years ago, its commercial value had never been seriously considered because of its high cost in production and low in energy conversion efficiency. A familiar predicament has restrained demand for photovoltaic application: People won't use them until they are affordable, but they won't get affordable until there is a mass market for them. As has happened in other expensive markets, businesses are desperate to crack the conundrum. Since the oil shortage in the 70s, crystalline solar cell efficiency has increased from 8% to over 13% to date on 100 mm2 commercial silicon cells by refining the process with advanced device technologies. Together with increased production volume, the cost per watt has been reduced from over $ 8 in the 80's to as low as $3 to day. However, the cost is still considered too high to compete with fossil fuel energy. Further cost reduction is necessary by improving the cell and module conversion efficiency. The increase in cell efficiency and the process to achieve the goal, however, have to follow the golden rule of economics that the operational cost is a fraction of the profit in return. It is shown numerically in this paper that Anti Reflection (AR) coating on silicon solar cells by Atmospheric Pressure Chemical Vapor Deposition (APCVD) technique for large volume production could have over 650% profit return.

Sign in / Sign up

Export Citation Format

Share Document