Anatomical properties in Thuja occidentalis:Variation and relationship to biological processes

IAWA Journal ◽  
2014 ◽  
Vol 35 (4) ◽  
pp. 363-384 ◽  
Author(s):  
Besma Bouslimi ◽  
Ahmed Koubaa ◽  
Yves Bergeron
Keyword(s):  
Wood Density ◽  
Ring Width ◽  
Wood Properties ◽  
Radial Variation ◽  
Steady Increase ◽  
Ring Density ◽  
Tracheid Length ◽  
Cambial Age ◽  
Axial Variation ◽  
Anatomical Properties

The variability in wood properties of eastern white cedar (Thuja occidentalis L.) is relatively poorly known. Here we report the axial and the radial variation in selected anatomical properties, namely, ring width, wood density, and tracheid length and width. Forty-five trees were randomly sampled and felled from three selected sites in the Abitibi-Témiscamingue region, Quebec, Canada. Disks were systematically sampled at 0.5, 1.3, and 3 m stem height and at every 2 meters thereafter up to the tree top. Average ring density at breast height was 355 kg/m3 with a small difference between earlywood and latewood. The latewood proportion was uniform and constant within the tree at about 32%. The tracheids were fine and long, averaging 25.3 μm in width and 2.07 mm in length. The variation in wood density components between trees was highly significant. The cambial age effect on all measured properties was highly significant. Ring density decreased from a maximum near the pith to a minimum in the juvenile–mature wood transition zone and remained constant or decreased slightly thereafter. Annual ring width decreased from a maximum near the pith to a minimum at the 10th ring and increased thereafter. Tracheid length and width showed typical radial variation characterized by a steady increase from pith to bark. Within-tree axial variation was highly significant, but ring width showed more substantial changes. Changes in wood properties with height depend on cambial age and thus are implied since the proportion of juvenile wood in the stem increases from the base to the top.

Predicting selected wood properties of jack pine following commercial thinning

2008 ◽  
Vol 38 (7) ◽  
pp. 2030-2043 ◽  
Author(s):  
Robert Schneider ◽  
S. Y. Zhang ◽  
D. Edwin Swift ◽  
Jean Bégin ◽  
Jean-Martin Lussier
Keyword(s):  
Wood Density ◽  
Ring Width ◽  
Wood Properties ◽  
Jack Pine ◽  
Modulus Of Rupture ◽  
Mixed Effect ◽  
Ring Density ◽  
Commercial Thinning ◽  
Cambial Age ◽  
The Impact

This paper examined the impact of commercial thinning on selected wood properties of jack pine ( Pinus banksiana Lamb.). Wood properties evaluated include wood density (ring density, earlywood ring density, and latewood ring density), percentage of latewood in the ring, and wood bending properties. Nonlinear, mixed-effect models have been developed using data from three commercially thinned sites in eastern Canada. Ring density followed the same pattern as percentage of latewood, in which cambial age, relative height, and ring width were found to have important effects. Earlywood and latewood ring densities changed within the juvenile wood zone until a plateau was reached. Ring width affected earlywood and latewood ring densities mainly in narrow rings. Wood bending stiffness (measured by modulus of elasticity) and strength (measured by modulus of rupture) increased with cambial age and wood density; whereas, wood strength was also affected by ring width. Commercial thinning did not influence the developed models, but it had an indirect effect through increased ring width.

scholarly journals Phenotypic Correlations among Growth and Selected Wood Properties in White Spruce (Picea glauca (Moench) Voss) †

Forests ◽  
2019 ◽  
Vol 10 (7) ◽  
pp. 589 ◽  
Author(s):  
Cyriac S. Mvolo ◽  
Ahmed Koubaa ◽  
Jean Beaulieu ◽  
Alain Cloutier ◽  
Maurice Defo ◽  
...  
Keyword(s):  
Physical Properties ◽  
Picea Glauca ◽  
Radial Growth ◽  
Juvenile Wood ◽  
Wood Properties ◽  
Mature Wood ◽  
Ring Density ◽  
Tracheid Length ◽  
Latewood Density ◽  
Anatomical Properties

We examined phenotypic relationships among radial growth-related, physical (i.e., related to wood density), and anatomical (i.e., related to tracheid dimensions) wood properties in white spruce (Picea glauca (Moench) Voss), in order to determine the strength and significance of their correlations. Additionally, principal component analysis (PCA) was used to establish if all of the properties must be measured and to determine the key properties that can be used as proxies for the other variables. Radial growth-related and physical properties were measured with an X-ray densitometer, while anatomical properties were measured with a Fiber Quality Analyzer. Fifteen wood properties (tracheid length (TL) and diameter (TD), earlywood tracheid length (ETL) and diameter (ETD), latewood tracheid length (LTL) and diameter (LTD), ring width (RW), ring area (RA), earlywood width (EWW), latewood width (LWW), latewood proportion (LWP), ring density (RD), intra-ring density variation, earlywood density (EWD), and latewood density (LWD)) were assessed. Relationships were evaluated at intra-ring and inter-ring levels in the juvenile wood (JW) and mature wood (MW) zones. Except for a few cases when mature tracheid diameter (TD) was involved, all intra-ring anatomical properties were highly and significantly correlated. Radial growth properties were correlated, with stronger relationships in MW compared to JW. Physical properties were often positively and significantly correlated in both JW and MW. A higher earlywood density coupled with a lower latewood density favored wood uniformity, i.e., the homogeneity of ring density within a growth ring. Managing plantations to suppress trees growth during JW formation, and enhancing radial growth when MW formation starts will favor overall wood quality. In order, RW-EWW-RA, TL-ETL-LTL, and RD-EWD-LWP are the three clusters that appeared in the three wood zones, the whole pith-to-bark radial section, the juvenile wood zone, and the mature wood zone.

scholarly journals Wood density and tracheid length of Aleppo pine (Pinus halepensis Mill.) grafts in relation to cambium age and growth rate

2018 ◽  
Vol 64 (No. 3) ◽  
pp. 101-107
Author(s):  
Foti Dafni ◽  
Passialis Costas ◽  
Voulgaridis Elias ◽  
Skaltsoyiannes Apostolos ◽  
Tsaktsira Maria
Keyword(s):  
Growth Rate ◽  
Wood Density ◽  
Juvenile Wood ◽  
Ring Width ◽  
Aleppo Pine ◽  
Age And Growth ◽  
Dry Density ◽  
Tracheid Length ◽  
Cambial Age ◽  
The Relationship

Wood density, tracheid length and growth rate were measured in Aleppo pine scions, 21–23 years old, and in Brutia pine rootstocks. In regard to the relationship between cambial age and dry density the results showed that the density increased with cambial age in both scions and rootstocks while the differences between Aleppo pine and Brutia pine were small. The relationship between cambial age and tracheid length showed an increase of tracheid length with cambial age. Differences between scions and rootstocks were small. From the last relationship it can be extracted that juvenile wood is produced in both scions and rootstocks although the Aleppo pine branches which were used for grafting were genetically matured. Between ring width and dry density and between ring width and tracheid length no statistical correlations were found either in scions or in rootstocks. The tracheid length in mature wood was higher than in juvenile wood. An increase of tracheid length with ring width was observed only in the case of juvenile wood.

scholarly journals Radial Variation of Wood Anatomical Properties Determines the Demarcation of Juvenile-Mature Wood in Schima superba

Forests ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 512
Author(s):  
Yunpeng Wang ◽  
Rui Zhang ◽  
Zhichun Zhou
Keyword(s):  
Early Stage ◽  
Basic Density ◽  
Ring Width ◽  
Wood Properties ◽  
Least Square ◽  
Radial Variation ◽  
Mature Wood ◽  
Dry Density ◽  
Schima Superba ◽  
Anatomical Properties

Schima superba is a precious broadleaf tree species that produces excellent timber. Analyzing the radial variation of wood anatomical properties within stems and determining the boundary between the juvenile and mature wood can provide a theoretical basis for the breeding and cultivation of S. superba. Herein, 30 54-year-old trees were used to analyze the radial variation of wood anatomical properties qualitatively. The correlation among wood properties was analyzed. On this basis, four types of model were used to predict the wood properties quantitatively, and the optimal segmentation model was used to determine the boundary between juvenile and mature wood. The results showed that the variation of the early stage (before the 20th year) was larger than that of the later stage (after the 20th year); moreover, the variation of the vessel features (9.56%) was greater than that of the fiber features (7.42%), the vessel lumen diameter (11.94%) and the fiber length (8.00%) had the most variation. There were three radial variation patterns in the wood properties. In the early stage, there was a significant positive correlation between the ring width and wood air-dry density (0.78) and wood basic density (0.89), and a significant negative correlation between the ring width and the fiber characters (−0.79~−0.93) and vessel characters (−0.64~−0.90). The growth models of Logistic and Richards were more suitable (R2 = 84.2%~95.2%) for the radial variation of wood anatomical properties than the nonlinear least square model (R2 = 67.7%~90.9%). The transition wood between juvenile and mature wood of S. superba was from the 11th to the 16th year based on aggregative indicators from the pith to bark at breast height. Finally, when taken together, the wood anatomical properties of S. superba had regular radial variation. Breeding programs need to consider both growth and wood anatomical properties in the early stage, but they can be neglected in the mature stage. The formation of mature wood of S. superba occurred after the 16th year.

Effects of cambial age, clone and climatic factors on ring width and ring density in Norway spruce (Picea abies) in southeastern Finland

2012 ◽  
Vol 263 ◽  
pp. 9-16 ◽  
Author(s):  
Ane Zubizarreta-Gerendiain ◽  
Jaume Gort-Oromi ◽  
Lauri Mehtätalo ◽  
Heli Peltola ◽  
Ari Venäläinen ◽  
...  
Keyword(s):  
Picea Abies ◽  
Norway Spruce ◽  
Climatic Factors ◽  
Ring Width ◽  
Ring Density ◽  
Cambial Age

Influence of Growth Rate and Cambial Age on Density of Rauli (Nothofagus nervosa) in Relation to Vessel Lumen Areas and Numbers

Holzforschung ◽  
1999 ◽  
Vol 53 (2) ◽  
pp. 199-203 ◽  
Author(s):  
M. P. Denne ◽  
C. M. Cahalan ◽  
D. P. Aebischer
Keyword(s):  
Growth Rate ◽  
Wood Density ◽  
Wood Quality ◽  
Ring Width ◽  
Substantial Effect ◽  
Present Sample ◽  
Vessel Lumen ◽  
Cambial Age ◽  
Old Trees ◽  
Nothofagus Nervosa

Summary To assess the likely effects of silvicultural treatment on the wood quality of Nothofagus nervosa grown in the UK, and the possibilities of independent selection within seed origins for density and growth rate, ring width and wood density were analysed from pith to bark of 19 trees. Variations in vessel lumen size, vessel number mm−2, and total lumen area mm−2 were analysed in ten trees. Since density increased by only 0.005g cm−3 per mm increase in ring width, silvicultural practices such as initial spacing and thinning are not likely to have a substantial effect on the wood density of rauli. Similarly, variation in density with cambial age was significant but relatively minor in the 40- and 60-year old trees of the present sample, suggesting that the rotation length is unlikely to have any practical influence on the density of rauli. Considerable between-tree differences in density were found which did not correspond to differences in ring width, suggesting it should be feasible to select independently for density and growth rate. These differences in density were associated with differences in both vessel lumen size and vessel number mm−2

scholarly journals Radial variation studies on wood properties of Populus deltoides parents and their hybrids

BioResources ◽  
2021 ◽  
Vol 16 (3) ◽  
pp. 4905-4923
Author(s):  
Hao Shen ◽  
Xinyi Xing ◽  
Ying Guan ◽  
Liang Zhou ◽  
Shengquan Liu ◽  
...  
Keyword(s):  
Populus Deltoides ◽  
Fibre Length ◽  
Wood Properties ◽  
Transgressive Segregation ◽  
Radial Variation ◽  
Width Ratio ◽  
Chemical Compositions ◽  
Alcohol Extract ◽  
Fibre Width ◽  
Cambial Age

The radial variation and the genetic variation of wood properties between the parents and offspring of Populus deltoides were studied in this work. The chemical composition, density, and anatomical characteristics of Populus deltoides cl. ‘Danhong’ and its offspring exhibited the phenomenon of transgressive segregation. The chemical compositions of the parents and offspring were decreased in several attributes (benzene alcohol extract, hemicelluloses, lignin) with the increase of the cambial age. Moreover, the fibre length, fibre width, ratio of fibre length to width, and wall thickness to lumen ratio of parents and offspring were increased with cambial age. In addition, the densities of parents and offspring were increased with the increase of cambial age. There were significant differences in wood properties among Populus deltoides and its hybrids. These results indicated that Populus deltoides cl. ‘Danhong’ could be considered as pulp material and Populus deltoides cl. ‘Nanyang’ as building material. According to the radial variation rule of each material character, the rotation cutting period can be selected as years 7 or 8.

scholarly journals Influence of cambial age and climate on ring width and wood density in Pinus radiata families

2013 ◽  
Vol 70 (5) ◽  
pp. 525-534 ◽  
Author(s):  
Miloš Ivković ◽  
Washington Gapare ◽  
Harry Wu ◽  
Sergio Espinoza ◽  
Philippe Rozenberg
Keyword(s):  
Wood Density ◽  
Pinus Radiata ◽  
Ring Width ◽  
Cambial Age

Age trends in genetic parameters of wood density in young Norway spruce

1999 ◽  
Vol 29 (1) ◽  
pp. 135-143 ◽  
Author(s):  
Gro Hylen
Keyword(s):  
Norway Spruce ◽  
Wood Density ◽  
Additive Genetic Variance ◽  
Genetic Correlations ◽  
Steady Increase ◽  
Environmental Variance ◽  
Cambial Age ◽  
Latewood Density ◽  
Age Trends ◽  
Heritability Estimates

Age trends of phenotypic, environmental, and additive genetic variance and heritability were estimated for overall density and its components earlywood and latewood densities and latewood proportion. The objective was to acquire information for both individual and cumulated rings from ring number 3 to 12 counted from the pith. Age-age correlations were calculated for cumulated density traits only. The wood density data were obtained with X-ray analysis of increment cores from 47 open-pollinated families of Norway spruce (Picea abies (L.) Karst.). The families had earlywood and latewood with significant differences in density for individual and cumulated rings and consequently for overall density. The latewood proportion had significant family variation for cumulated rings but not for all individual rings. Large fluctuations in environmental variance caused fluctuations in heritability estimates for successive rings. A strong decrease in environmental variance for all cumulated traits, especially from ring 3 to 5, resulted in a steady increase in heritability estimates. The latewood density had the highest heritability estimates and latewood proportion the lowest for both individual and cumulated rings. Overall density and the cumulated components at cambial age 12 showed strong genetic correlations with their respective traits at all younger ages.

Intratree and intertree variation in selected wood quality characteristics of European oak (Quercuspetraea and Quercusrobur)

1994 ◽  
Vol 24 (9) ◽  
pp. 1818-1823 ◽  
Author(s):  
S.Y. Zhang ◽  
G. Nepveu ◽  
R. Eyono Owoundi
Keyword(s):  
Total Variation ◽  
Wood Density ◽  
Wood Quality ◽  
Ring Width ◽  
Relative Magnitude ◽  
Tree Age ◽  
Cambial Age ◽  
Latewood Density ◽  
European Oak ◽  
Intratree Variation

Twenty-three trees of European oak (Quercuspetraea (Matt) Liebl. and Quercusrobur L.) were collected from northeastern France to study intratree and intertree variation in the following characteristics: (i) wood density as well as earlywood density and latewood density; (ii) various types of wood shrinkage; and (iii) ring width and its components. Both intratree variation and intertree variation in the three characteristics are significant, but intertree variation is generally smaller. However, the relative magnitude of intertree variation varies with characteristic: intertree variation accounts for about 40% of the total variation in radial, tangential, and volumetric wood shrinkage, 32.5% of the total variation in ring width, and 12.6% of the total variation in wood density. Furthermore, the intertree variation is closely and positively related to the intratree variation: among the three characteristics studied, both intertree variation and intratree variation were highest for ring width and its components, and lowest for wood density and its components. In addition, intratree variation increased remarkably with increasing tree age in these species. In general, intratree variation in wood density and wood shrinkage depends more on cambial age than on ring width. The present study, together with the information available so far, suggests that the quality of European oak wood could be significantly improved.

Sign in / Sign up

Export Citation Format

Share Document