scholarly journals Analysis on Electromagnetic Force Properties of End Windings in Turbo-Generators

2020 ◽  
Vol 6 (2) ◽  
pp. 14
Author(s):  
Guiji Tang ◽  
Hongchun Jiang ◽  
Yuling He ◽  
Gaurang Vakil
Keyword(s):  
Electromagnetic Force

Analysis of Vibration Caused by Electromagnetic Force on Stator End-Winding of Large Dry Submersible Motor

2013 ◽  
Vol 416-417 ◽  
pp. 428-432
Author(s):  
Li Shan ◽  
Xiao Wei Cheng ◽  
Yong Fang ◽  
Xiao Hua Bao
Keyword(s):  
Electromagnetic Field ◽  
Steady State ◽  
Transition State ◽  
Electromagnetic Force ◽  
Radial Displacement ◽  
Radial Direction ◽  
Axial Direction ◽  
Axial Displacement ◽  
Force Density ◽  
Submersible Motor

This paper investigates the vibration which caused by electromagnetic on the stator end-winding of the large dry submersible motor. Firstly, the electromagnetic field which included transition state and steady state is researched by 3-D FEM. Secondly, the electromagnetic force which lead to vibrations of end-winding is calculated by numerical method, it can be obtained that where endured the largest force density along the slant part of end-winding. Finally, the radial displacement and the axial displacement of the slant part which caused by vibrations is studied, the analysis results show that the axial displacement is larger than the amplitude of radial displacement. It indicates that the slant part of end-winding will be more easily damaged at axial direction than radial direction.

scholarly journals Research on the Non-Magnetic Conductor of a PMSM Based on the Principle of Variable Exciting Magnetic Reluctance

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 318
Author(s):  
Chunyan Li ◽  
Fei Guo ◽  
Baoquan Kou ◽  
Tao Meng
Keyword(s):  
Permanent Magnet ◽  
Electromagnetic Force ◽  
Electromotive Force ◽  
Permanent Magnets ◽  
Permanent Magnet Synchronous Motor ◽  
Synchronous Motor ◽  
Magnetic Conductor ◽  
Critical Speeds ◽  
Motor Structure ◽  
Test Result

A permanent magnet synchronous motor (PMSM) based on the principle of variable exciting magnetic reluctance (VMRPMSM) is presented. The motor is equipped with symmetrical non-magnetic conductors on both sides of the tangential magnetized permanent magnets (PMs). By placing the non-magnetic conductor (NMC), the magnetic reluctance in the exciting circuit is adjusted, and the flux weakening (FW) of the motor is realized. Hence, the NMC is studied comprehensively. On the basis of introducing the motor structure, the FW principle of this PMSM is described. The shape of the NMC is determined by analyzing and calculating the electromagnetic force (EF) acting on the PMs. We calculate the magnetic reluctance of the NMC and research on the effects of the NMC on electromagnetic force, d-axis and q-axis inductance and FW performance. The critical speeds from the test of the no-load back electromotive force (EMF) verify the correctness of the NMC design. The analysis is corresponding to the test result which lays the foundation of design for this kind of new PMSM.

scholarly journals Double Closed-Loop Compound Control Strategy for Magnetic Liquid Double Suspension Bearing

Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1195
Author(s):  
Jianhua Zhao ◽  
Yongqiang Wang ◽  
Xuchao Ma ◽  
Sheng Li ◽  
Dianrong Gao ◽  
...  
Keyword(s):  
Control Strategy ◽  
Electromagnetic Force ◽  
Closed Loop ◽  
Static Characteristic ◽  
Magnetic Liquid ◽  
Initial Current ◽  
Electromagnetic System ◽  
Initial Flow ◽  
Hydrostatic Force ◽  
Position Feedback

As a new type of suspension bearing, the magnetic liquid double suspension bearing (MLDSB) is mainly supported by electromagnetic suspension and supplemented by hydrostatic support. At present, the MLDSB adopts the regulation strategy of “electromagnetic-position feedback closed-loop, hydrostatic constant-flow supply” (referred to as CFC mode). In the equilibrium position, the external load is carried by the electromagnetic system, and the hydrostatic system produces no supporting force. Thus, the carrying capacity and supporting stiffness of the MLDSB can be reduced. To solve this problem, the double closed-loop control strategy of “electromagnetic system-force feedback inner loop and hydrostatic-position feedback outer loop” (referred to as DCL mode) was proposed to improve the bearing performance and operation stability of the MLDSB. First, the mathematical models of CFC mode and DCL mode of the single DOF supporting system were established. Second, the real-time variation laws of rotor displacement, flow/hydrostatic force, and regulating current/electromagnetic force in the two control modes were plotted, compared, and analyzed. Finally, the influence law of initial current, flow, and controller parameters on the dynamic and static characteristic index were analyzed in detail. The results show that compared with that in CFC mode, the displacement in DCL mode is smaller, and the adjustment time is shorter. The hydrostatic force is equal to the electromagnetic force in DCL mode when the rotor returns to the balance position. Moreover, the system in DCL mode has better robustness, and the initial flow has a more obvious influence on the dynamic and static characteristic indexes. This study provides a theoretical basis for stable suspension control and the safe and reliable operation of the MLDSB.

Based on the technology of electromagnetic force driving and differential pressure control for producing solder balls

2021 ◽  
Vol 286 ◽  
pp. 129236
Author(s):  
Tongju Wang ◽  
Yongping Lei ◽  
Peng Zhao ◽  
Jian Lin ◽  
Hanguang Fu
Keyword(s):  
Electromagnetic Force ◽  
Pressure Control ◽  
Differential Pressure ◽  
Solder Balls

scholarly journals Analysis of Electromagnetic Force Ripple in a Bearingless Synchronous Reluctance Motor

2020 ◽  
pp. 1-1
Author(s):  
Victor Mukherjee ◽  
Paavo Rasilo ◽  
Floran Martin ◽  
Anouar Belahcen
Keyword(s):  
Electromagnetic Force ◽  
Synchronous Reluctance Motor ◽  
Reluctance Motor ◽  
Force Ripple

Modeling and suppression of unbalanced radial force for in-wheel motor driving system

2021 ◽  
pp. 107754632110260
Author(s):  
Zhaoxue Deng ◽  
Xu Li ◽  
Tianqin Liu ◽  
Shuen Zhao
Keyword(s):  
Electromagnetic Force ◽  
Switched Reluctance Motor ◽  
Radial Force ◽  
Force Amplitude ◽  
Switched Reluctance ◽  
Driving System ◽  
Coupling Relationship ◽  
Force Fluctuation ◽  
Reluctance Motor ◽  
Road Excitation

Considering the negative vertical dynamics effect of switched reluctance motor on an in-wheel motor driving system, this article presents a modeling and suppression method for unbalanced radial force of the in-wheel motor driving system. To tease out the coupling relationship within the in-wheel motor driving system, this investigation, respectively, explores the principle of unbalanced radial force and the coupling relationship between rotor eccentricity and road excitation based on the suspension response model with unbalanced radial force under road excitation. The switched reluctance motor nonlinear analytical model was fitted by the Fourier series, and its radial electromagnetic force was modeled and analyzed by the Maxwell stress tensor method. To mitigate the influence of radial electromagnetic force fluctuation and unbalanced radial force amplitude value under eccentricity condition on the in-wheel motor driving system, the elitist non-dominated sorting genetic algorithm was adopted to improve radial electromagnetic force fluctuation and unbalanced radial force amplitude value of the switched reluctance motor. The simulation results show that the proposed optimization method can suppress the radial electromagnetic force fluctuation and unbalanced radial force amplitude value, and the negative effect of vertical dynamics of the in-wheel motor driving system is conspicuously mitigated.

Sign in / Sign up

Export Citation Format

Share Document