Comparison of TRMM-Derived Rainfall Products for General and Extreme Rains over the Maritime Continent

2017 ◽  
Vol 56 (7) ◽  
pp. 1867-1881 ◽  
Author(s):  
Andung Bayu Sekaranom ◽  
Hirohiko Masunaga
Keyword(s):  
Rain Rate ◽  
Tropical Rainfall Measuring Mission ◽  
Maritime Continent ◽  
Brightness Temperatures ◽  
Extreme Rain ◽  
Trmm Precipitation ◽  
Precipitation Analysis ◽  
Microwave Imager ◽  
Trmm Microwave Imager ◽  
Rain Rates

AbstractProperties of the rain estimation differences between Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR) 2A25, TRMM Microwave Imager (TMI) 2A12, and TRMM Multisatellite Precipitation Analysis (TMPA) 3B42 are investigated with a focus on distinguishing between nonextreme and extreme rains over the Maritime Continent from 1998 to 2014. Statistical analyses of collocated TMI 1B11 85-GHz polarization-corrected brightness temperatures, PR 2A23 storm-top heights, and PR 2A25 vertical rain profiles are conducted to identify possible sources of the differences. The results indicate that a large estimation difference exists between PR and TMI for the general rain rate (extreme and nonextreme events). The PR–TMI rain-rate differences are larger over land and coast than over ocean. When extreme rain is isolated, a higher frequency of occurrence is identified by PR over ocean, followed by TMI and TMPA. Over land, TMI yields higher rain frequencies than PR with an intermediate range of rain rates (between 15 and 25 mm h−1), but it gives way to PR for the highest extremes. The turnover at the highest rain rates arises because the heaviest rain depicted by PR does not necessarily accompany the strongest ice-scattering signals, which TMI relies on for estimating precipitation over land and coast.

scholarly journals Hurricane GPROF: An Optimized Ocean Microwave Rainfall Retrieval for Tropical Cyclones

2016 ◽  
Vol 33 (7) ◽  
pp. 1539-1556 ◽  
Author(s):  
Paula J. Brown ◽  
Christian D. Kummerow ◽  
David L. Randel
Keyword(s):  
Tropical Cyclones ◽  
Vertical Profile ◽  
Rain Rate ◽  
Tropical Rainfall Measuring Mission ◽  
Initial Assessment ◽  
Trmm Precipitation ◽  
Microwave Imager ◽  
One Year ◽  
Trmm Microwave Imager ◽  
Rain Rates

AbstractThe Goddard profiling algorithm (GPROF) is an operational passive microwave retrieval that uses a Bayesian scheme to estimate rainfall. GPROF 2014 retrieves rainfall and hydrometeor vertical profile information based upon a database of profiles constructed to be simultaneously consistent with Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) and TRMM Microwave Imager (TMI) observations. A small number of tropical cyclones are in the current database constructed from one year of TRMM data, resulting in the retrieval performing relatively poorly for these systems, particularly for the highest rain rates. To address this deficiency, a new database focusing specifically on hurricanes but consisting of 9 years of TRMM data is created. The new database and retrieval procedure for TMI and GMI is called Hurricane GPROF. An initial assessment of seven tropical cyclones shows that Hurricane GPROF provides a better estimate of hurricane rain rates than GPROF 2014. Hurricane GPROF rain-rate errors relative to the PR are reduced by 20% compared to GPROF, with improvements in the lowest and highest rain rates especially. Vertical profile retrievals for four hydrometeors are also enhanced, as error is reduced by 30% compared to the GPROF retrieval, relative to PR estimates. When compared to the full database of tropical cyclones, Hurricane GPROF improves the RMSE and MAE of rain-rate estimates over those from GPROF by about 22% and 27%, respectively. Similar improvements are also seen in the overall rain-rate bias for hurricanes in the database, which is reduced from 0.20 to −0.06 mm h−1.

Rain Retrieval from TMI Brightness Temperature Measurements Using a TRMM PR–Based Database

2006 ◽  
Vol 45 (3) ◽  
pp. 455-466 ◽  
Author(s):  
Nicolas Viltard ◽  
Corinne Burlaud ◽  
Christian D. Kummerow
Keyword(s):  
Brightness Temperature ◽  
Rain Rate ◽  
Tropical Rainfall Measuring Mission ◽  
High Standard ◽  
Brightness Temperatures ◽  
Trmm Pr ◽  
Microwave Imager ◽  
Point To Point ◽  
Trmm Microwave Imager ◽  
Test Database

Abstract This study focuses on improving the retrieval of rain from measured microwave brightness temperatures and the capability of the retrieved field to represent the mesoscale structure of a small intense hurricane. For this study, a database is constructed from collocated Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) and the TRMM Microwave Imager (TMI) data resulting in about 50 000 brightness temperature vectors associated with their corresponding rain-rate profiles. The database is then divided in two: a retrieval database of about 35 000 rain profiles and a test database of about 25 000 rain profiles. Although in principle this approach is used to build a database over both land and ocean, the results presented here are only given for ocean surfaces, for which the conditions for the retrieval are optimal. An algorithm is built using the retrieval database. This algorithm is then used on the test database, and results show that the error can be constrained to reasonable levels for most of the observed rain ranges. The relative error is nonetheless sensitive to the rain rate, with maximum errors at the low and high ends of the rain intensities (+60% and −30%, respectively) and a minimum error between 1 and 7 mm h−1. The retrieval method is optimized to exhibit a low total bias for climatological purposes and thus shows a high standard deviation on point-to-point comparisons. The algorithm is applied to the case of Hurricane Bret (1999). The retrieved rain field is analyzed in terms of structure and intensity and is then compared with the TRMM PR original rain field. The results show that the mesoscale structures are indeed well reproduced even if the retrieved rain misses the highest peaks of precipitation. Nevertheless, the mesoscale asymmetries are well reproduced and the maximum rain is found in the correct quadrant. Once again, the total bias is low, which allows for future calculation of the heat sources/sinks associated with precipitation production and evaporation.

scholarly journals Comparisons of Instantaneous TRMM Ground Validation and Satellite Rain-Rate Estimates at Different Spatial Scales

2008 ◽  
Vol 47 (8) ◽  
pp. 2215-2237 ◽  
Author(s):  
David B. Wolff ◽  
Brad L. Fisher
Keyword(s):  
Rain Rate ◽  
Spatial Scales ◽  
Tropical Rainfall Measuring Mission ◽  
Heavy Rain ◽  
Global Ocean ◽  
Ground Validation ◽  
Microwave Imager ◽  
Rain Events ◽  
Trmm Microwave Imager ◽  
Rain Rates

Abstract This study provides a comprehensive intercomparison of instantaneous rain rates observed by the two rain sensors aboard the Tropical Rainfall Measuring Mission (TRMM) satellite with ground data from two regional sites established for long-term ground validation: Kwajalein Atoll and Melbourne, Florida. The satellite rain algorithms utilize remote observations of precipitation collected by the TRMM Microwave Imager (TMI) and the Precipitation Radar (PR) aboard the TRMM satellite. Three standard level II rain products are generated from operational applications of the TMI, PR, and combined (COM) rain algorithms using rain information collected from the TMI and the PR along the orbital track of the TRMM satellite. In the first part of the study, 0.5° × 0.5° instantaneous rain rates obtained from the TRMM 3G68 product were analyzed and compared to instantaneous Ground Validation (GV) program rain rates gridded at a scale of 0.5° × 0.5°. In the second part of the study, TMI, PR, COM, and GV rain rates were spatiotemporally matched and averaged at the scale of the TMI footprint (∼150 km2). This study covered a 6-yr period (1999–2004) and consisted of over 50 000 footprints for each GV site. In the first analysis, the results showed that all of the respective rain-rate estimates agree well, with some exceptions. The more salient differences were associated with heavy rain events in which one or more of the algorithms failed to properly retrieve these extreme events. Also, it appears that there is a preferred mode of precipitation for TMI rain rates at or near 2 mm h−1 over the ocean. This mode was noted over ocean areas of Kwajalein and Melbourne and has been observed in TRMM tropical–global ocean areas as well.

scholarly journals Differences of Rainfall Estimates over Land by Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR) and TRMM Microwave Imager (TMI)—Dependence on Storm Height

2005 ◽  
Vol 44 (3) ◽  
pp. 367-383 ◽  
Author(s):  
Fumie A. Furuzawa ◽  
Kenji Nakamura
Keyword(s):  
Tropical Rainfall Measuring Mission ◽  
Local Times ◽  
Precipitation Radar ◽  
Tropical Rainfall ◽  
Convective Rain ◽  
Brightness Temperatures ◽  
Trmm Precipitation ◽  
Microwave Imager ◽  
Trmm Microwave Imager ◽  
Orbit Data

Abstract It is well known that precipitation rate estimation is poor over land. Using the Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) and TRMM Microwave Imager (TMI), the performance of the TMI rain estimation was investigated. Their differences over land were checked by using the orbit-by-orbit data for June 1998, December 1998, January 1999, and February 1999, and the following results were obtained: 1) Rain rate (RR) near the surface for the TMI (TMI-RR) is smaller than that for the PR (PR-RR) in winter; it is also smaller from 0900 to 1800 LT. These dependencies show some variations at various latitudes or local times. 2) When the storm height is low (<5 km), the TMI-RR is smaller than the PR-RR; when it is high (>8 km), the PR-RR is smaller. These dependencies of the RR on the storm height do not depend on local time or latitude. The tendency for a TMI-RR to be smaller when the storm height is low is more noticeable in convective rain than in stratiform rain. 3) Rain with a low storm height predominates in winter or from 0600 to 1500 LT, and convective rain occurs frequently from 1200 to 2100 LT. Result 1 can be explained by results 2 and 3. It can be concluded that the TMI underestimates rain with low storm height over land because of the weakness of the TMI algorithm, especially for convective rain. On the other hand, it is speculated that TMI overestimates rain with high storm height because of the effect of anvil rain with low brightness temperatures at high frequencies without rain near the surface, and because of the effect of evaporation or tilting, which is indicated by a PR profile and does not appear in the TMI profile. Moreover, it was found that the PR rain for the cases with no TMI rain amounted to about 10%–30% of the total but that the TMI rain for the cases with no PR rain accounted for only a few percent of the TMI rain. This result can be explained by the difficulty of detecting shallow rain with the TMI.

scholarly journals Rain-Rate Characteristics over the Korean Peninsula and Improvement of the Goddard Profiling (GPROF) Database for TMI Rainfall Retrievals

2012 ◽  
Vol 51 (4) ◽  
pp. 786-798 ◽  
Author(s):  
Geun-Hyeok Ryu ◽  
Byung-Ju Sohn ◽  
Christian D. Kummerow ◽  
Eun-Kyoung Seo ◽  
Gregory J. Tripoli
Keyword(s):  
Korean Peninsula ◽  
Rain Rate ◽  
Tropical Rainfall Measuring Mission ◽  
Summer Rainfall ◽  
Retrieval Algorithm ◽  
Rain Gauges ◽  
Brightness Temperatures ◽  
University Of Wisconsin ◽  
Microwave Imager ◽  
Trmm Microwave Imager

AbstractSummer rainfall characteristics over the Korean Peninsula are examined using six years of Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) measurements and surface rain measurements from the densely populated rain gauges spread across South Korea. A comparison of the TMI brightness temperature at 85 GHz with the measured surface rain rate reveals that a significant portion of rainfall over the peninsula occurs at warmer brightness temperatures than would be expected from the Goddard profiling (GPROF) database. By incorporating the locally observed rain characteristics into the GPROF algorithm, efforts are made to test whether locally appropriate hydrometeor profiles may be used to improve the retrieved rainfall. Profiles are obtained by simulating rain cases using the cloud-resolving University of Wisconsin Nonhydrostatic Modeling System (UW-NMS) model and matching the calculated radar reflectivities to TRMM precipitation radar (PR) reflectivities. Selected profiles and the corresponding simulated TMI brightness temperatures (limited in this study to values that are larger than 235 K) are added to the GPROF database to form a modified database that is considered to be more suitable for local application over the Korean Peninsula. The rainfall retrieved from the new database demonstrates that heavy-rainfall events—in particular, those associated with warmer clouds—are better captured by the new algorithm as compared with the official TRMM GPROF version-6 retrievals. The results suggest that a more locally suitable rain retrieval algorithm can be developed if locally representative rain characteristics are included in the GPROF algorithm.

scholarly journals Tropical Cyclone Rainfall Estimates from FY-3B MWRI Brightness Temperatures Using the WS Algorithm

2018 ◽  
Vol 10 (11) ◽  
pp. 1770 ◽  
Author(s):  
Ruanyu Zhang ◽  
Zhenzhan Wang ◽  
Kyle Hilburn
Keyword(s):  
Tropical Rainfall Measuring Mission ◽  
Retrieval Algorithm ◽  
Brightness Temperatures ◽  
Earth Observing System ◽  
Mesoscale Structures ◽  
Sensing Systems ◽  
Remote Sensing Systems ◽  
Microwave Imager ◽  
Trmm Microwave Imager ◽  
Rain Rates

A rainfall retrieval algorithm for tropical cyclones (TCs) using 18.7 and 36.5 GHz of vertically and horizontally polarized brightness temperatures (Tbs) from the Microwave Radiation Imager (MWRI) is presented. The beamfilling effect is corrected based on ratios of the retrieved liquid water absorption and theoretical Mie absorption coefficients at 18.7 and 36.5 GHz. To assess the performance of this algorithm, MWRI measurements are matched with the National Snow and Ice Data Center (NSIDC) precipitation for six TCs. The comparison between MWRI and NSIDC rain rates is relatively encouraging, with a mean bias of −0.14 mm/h and an overall root-mean-square error (RMSE) of 1.99 mm/h. A comparison of pixel-to-pixel retrievals shows that MWRI retrievals are constrained to reasonable levels for most rain categories, with a minimum error of −1.1% in the 10–15 mm/h category; however, with maximum errors around −22% at the lowest (0–0.5 mm/h) and highest rain rates (25–30 mm/h). Additionally, Advanced Microwave Scanning Radiometer for Earth Observing System (AMSR-E) Tbs are applied to retrieve rain rates to assess the sensitivity of this algorithm, with a mean bias and RMSE of 0.90 mm/h and 3.11 mm/h, respectively. For the case study of TC Maon (2011), MWRI retrievals underestimate rain rates over 6 mm/h and overestimate rain rates below 6 mm/h compared with Precipitation Radar (PR) observations on storm scales. The Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) rainfall data provided by the Remote Sensing Systems (RSS) are applied to assess the representation of mesoscale structures in intense TCs, and they show good consistency with MWRI retrievals.

Status of the TRMM 2A12 Land Precipitation Algorithm

2010 ◽  
Vol 27 (8) ◽  
pp. 1343-1354 ◽  
Author(s):  
Kaushik Gopalan ◽  
Nai-Yu Wang ◽  
Ralph Ferraro ◽  
Chuntao Liu
Keyword(s):  
Central Africa ◽  
Tropical Rainfall Measurement Mission ◽  
Precipitation Radar ◽  
Brightness Temperatures ◽  
Trmm Precipitation ◽  
Microwave Imager ◽  
Trmm Microwave Imager ◽  
Rain Rates ◽  
Large Sections ◽  
Seasonal Dependence

Abstract This paper describes improvements to the Tropical Rainfall Measurement Mission (TRMM) Microwave Imager (TMI) land rainfall algorithm in version 7 (v7) of the TRMM data products. The correlations between rain rates and TMI 85-GHz brightness temperatures (Tb) for convective and stratiform rain are generated using 7 years of collocated TMI and TRMM precipitation radar (PR) data. The TMI algorithm for estimating the convective ratio of rainfall is also modified. This paper highlights both the improvements in the v7 algorithm and the continuing problems with the land rainfall retrievals. It is demonstrated that the proposed changes to the algorithm significantly lower the overestimation by TMI globally and over large sections of central Africa and South America. Also highlighted are the problems with the 2A12 land algorithm that have not been addressed in the version 7 algorithm, such as large regional and seasonal dependence of biases in the TMI rain estimates, and potential changes to the algorithm to resolve these problems are discussed.

Combined Radar and Radiometer Analysis of Precipitation Profiles for a Parametric Retrieval Algorithm

2005 ◽  
Vol 22 (7) ◽  
pp. 909-929 ◽  
Author(s):  
Hirohiko Masunaga ◽  
Christian D. Kummerow
Keyword(s):  
A Priori ◽  
Three Dimensional ◽  
Tropical Rainfall Measuring Mission ◽  
Dimensional Structure ◽  
Retrieval Algorithm ◽  
Brightness Temperatures ◽  
Precipitation Measurement ◽  
Microwave Imager ◽  
Trmm Microwave Imager ◽  
Global Precipitation

Abstract A methodology to analyze precipitation profiles using the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) and precipitation radar (PR) is proposed. Rainfall profiles are retrieved from PR measurements, defined as the best-fit solution selected from precalculated profiles by cloud-resolving models (CRMs), under explicitly defined assumptions of drop size distribution (DSD) and ice hydrometeor models. The PR path-integrated attenuation (PIA), where available, is further used to adjust DSD in a manner that is similar to the PR operational algorithm. Combined with the TMI-retrieved nonraining geophysical parameters, the three-dimensional structure of the geophysical parameters is obtained across the satellite-observed domains. Microwave brightness temperatures are then computed for a comparison with TMI observations to examine if the radar-retrieved rainfall is consistent in the radiometric measurement space. The inconsistency in microwave brightness temperatures is reduced by iterating the retrieval procedure with updated assumptions of the DSD and ice-density models. The proposed methodology is expected to refine the a priori rain profile database and error models for use by parametric passive microwave algorithms, aimed at the Global Precipitation Measurement (GPM) mission, as well as a future TRMM algorithms.

scholarly journals Improving Satellite-Based Subhourly Surface Rain Estimates Using Vertical Rain Profile Information

2019 ◽  
Vol 20 (5) ◽  
pp. 1015-1026 ◽  
Author(s):  
Nobuyuki Utsumi ◽  
Hyungjun Kim ◽  
F. Joseph Turk ◽  
Ziad. S. Haddad
Keyword(s):  
Rain Rate ◽  
Tropical Rainfall Measuring Mission ◽  
Rain Gauge ◽  
Rain Gauge Data ◽  
Rain Gauges ◽  
Gauge Data ◽  
Surface Rain Rate ◽  
Trmm Precipitation ◽  
Time Lagged ◽  
Rain Rates

Abstract Quantifying time-averaged rain rate, or rain accumulation, on subhourly time scales is essential for various application studies requiring rain estimates. This study proposes a novel idea to estimate subhourly time-averaged surface rain rate based on the instantaneous vertical rain profile observed from low-Earth-orbiting satellites. Instantaneous rain estimates from the Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR) are compared with 1-min surface rain gauges in North America and Kwajalein atoll for the warm seasons of 2005–14. Time-lagged correlation analysis between PR rain rates at various height levels and surface rain gauge data shows that the peak of the correlations tends to be delayed for PR rain at higher levels up to around 6-km altitude. PR estimates for low to middle height levels have better correlations with time-delayed surface gauge data than the PR’s estimated surface rain rate product. This implies that rain estimates for lower to middle heights may have skill to estimate the eventual surface rain rate that occurs 1–30 min later. Therefore, in this study, the vertical profiles of TRMM PR instantaneous rain estimates are averaged between the surface and various heights above the surface to represent time-averaged surface rain rate. It was shown that vertically averaged PR estimates up to middle heights (~4.5 km) exhibit better skill, compared to the PR estimated instantaneous surface rain product, to represent subhourly (~30 min) time-averaged surface rain rate. These findings highlight the merit of additional consideration of vertical rain profiles, not only instantaneous surface rain rate, to improve subhourly surface estimates of satellite-based rain products.

scholarly journals Microwave Rainfall Estimation over Coasts

2005 ◽  
Vol 22 (5) ◽  
pp. 497-512 ◽  
Author(s):  
Jeffrey R. McCollum ◽  
Ralph R. Ferraro
Keyword(s):  
Tropical Rainfall Measuring Mission ◽  
Radar Rainfall ◽  
The Public ◽  
Earth Observing System ◽  
Temperature Criterion ◽  
Previous Algorithm ◽  
Microwave Imager ◽  
Trmm Microwave Imager ◽  
Rain Rates ◽  
Microwave Data

Abstract The microwave coastal rain identification procedure that has been used by NASA for over 10 yr, and also more recently by NOAA, for different instruments beginning with the Special Sensor Microwave Imager (SSM/I), is updated for use with Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) and Advanced Microwave Scanning Radiometer (AMSR)-[Earth Observing System (EOS)] E microwave data. Since the development of the SSM/I algorithm, a wealth of both space-based and ground-based radar-rainfall estimates have become available, and here some of these data are used with collocated TMI and AMSR-E data to improve the estimation of coastal rain areas from microwave data. Two major improvements are made. The first involves finding the conditions where positive rain rates should be estimated rather than leaving the areas without estimates as in the previous algorithm. The second is a modification to the final step of the rain identification method; previously, a straight brightness temperature cutoff was used, but this is modified to a polarization-corrected temperature criterion. These modifications are made for the TRMM version 6 product release and the third (1 September) release of AMSR-E products to the public, both in 2004. The modifications are slightly different for each of these two sensors.

Sign in / Sign up

Export Citation Format

Share Document