scholarly journals No Surface Cooling over Antarctica from the Negative Greenhouse Effect Associated with Instantaneous Quadrupling of CO2 Concentrations

2017 ◽  
Vol 31 (1) ◽  
pp. 317-323 ◽  
Author(s):  
Karen L. Smith ◽  
Gabriel Chiodo ◽  
Michael Previdi ◽  
Lorenzo M. Polvani
Keyword(s):  
Greenhouse Effect ◽  
Radiative Forcing ◽  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Surface Cooling ◽  
Model Calculations ◽  
Co2 Concentrations

Abstract Over the highest elevations of Antarctica, during many months of the year, air near the surface is colder than in much of the overlying atmosphere. This unique feature of the Antarctic atmosphere has been shown to result in a negative greenhouse effect and a negative instantaneous radiative forcing at the top of the atmosphere , when carbon dioxide (CO2) concentrations are increased, and it has been suggested that this effect might play some role in te recent cooling trends observed over East Antarctica. Here, using fully coupled global climate model integrations, in addition to radiative transfer model calculations, the authors confirm the existence of such a negative over parts of Antarctica in response to an instantaneous quadrupling of CO2. However, it is also shown that the instantaneous radiative forcing at the tropopause is positive. Further, the negative lasts only a few days following the imposed perturbation, and rapidly disappears as the stratosphere cools in response to increased CO2. As a consequence, like the , the stratosphere-adjusted radiative forcing at the TOA is positive over all of Antarctica and, in the model presented herein, surface temperatures increase everywhere over that continent in response to quadrupled CO2. The results, therefore, clearly demonstrate that the curious negative instantaneous radiative forcing plays no role in the recently observed East Antarctic cooling.

scholarly journals Comparison of ice particle characteristics simulated by the Community Atmosphere Model (CAM5) with in-situ observations

2014 ◽  
Vol 14 (6) ◽  
pp. 7637-7681 ◽  
Author(s):  
T. Eidhammer ◽  
H. Morrison ◽  
A. Bansemer ◽  
A. Gettelman ◽  
A. J. Heymsfield
Keyword(s):  
Size Distribution ◽  
Radiative Forcing ◽  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Atmospheric Model ◽  
Slope Parameter ◽  
Cloud Radiative Forcing ◽  
Threshold Size ◽  
Cloud Ice

Abstract. Detailed measurements of ice crystals in cirrus clouds were used to compare with results from the Community Atmospheric Model Version 5 (CAM5) global climate model. The observations are from two different field campaigns with contrasting conditions: Atmospheric Radiation Measurements Spring Cloud Intensive Operational Period in 2000 (ARM-IOP), which was characterized primarily by midlatitude frontal clouds and cirrus, and Tropical Composition, Cloud and Climate Coupling (TC4), which was dominated by anvil cirrus. Results show that the model typically overestimates the slope parameter of the exponential size distributions of cloud ice and snow, while the variation with temperature (height) is comparable. The model also overestimates the ice/snow number concentration (0th moment of the size distribution) and underestimates higher moments (2nd through 5th), but compares well with observations for the 1st moment. Overall the model shows better agreement with observations for TC4 than for ARM-IOP in regards to the moments. The mass-weighted terminal fallspeed is lower in the model compared to observations for both ARM-IOP and TC4, which is partly due to the overestimation of the size distribution slope parameter. Sensitivity tests with modification of the threshold size for cloud ice to snow autoconversion (Dcs) do not show noticeable improvement in modeled moments, slope parameter and mass weighed fallspeed compared to observations. Further, there is considerable sensitivity of the cloud radiative forcing to Dcs, consistent with previous studies, but no value of Dcs improves modeled cloud radiative forcing compared to measurements. Since the autoconversion of cloud ice to snow using the threshold size Dcs has little physical basis, future improvement to combine cloud ice and snow into a single category, eliminating the need for autoconversion, is suggested.

How detailed do cloud microphysics need to be in climate models?

2021 ◽  
Author(s):  
Ulrike Proske ◽  
Sylvaine Ferrachat ◽  
David Neubauer ◽  
Ulrike Lohmann
Keyword(s):  
Radiative Forcing ◽  
Climate Models ◽  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Computing Time ◽  
Cloud Microphysics ◽  
Model Response ◽  
Microphysical Processes ◽  
Improved Accuracy

<p>Clouds are of major importance for the climate system, but the radiative forcing resulting from their interaction with aerosols remains uncertain. To improve the representation of clouds in climate models, the parameterisations of cloud microphysical processes (CMPs) have become increasingly detailed. However, more detailed climate models do not necessarily result in improved accuracy for estimates of radiative forcing (Knutti and Sedláček, 2013; Carslaw et al., 2018). On the contrary, simpler formulations are cheaper, sufficient for some applications, and allow for an easier understanding of the respective process' effect in the model.</p><p>This study aims to gain an understanding which CMP parameterisation complexity is sufficient through simplification. We gradually phase out processes such as riming or aggregation from the global climate model ECHAM-HAM, meaning that the processes are only allowed to exhibit a fraction of their effect on the model state. The shape of the model response as a function of the artificially scaled effect of a given process helps to understand the importance of this process for the model response and its potential for simplification. For example, if partially removing a process induces only minor alterations in the present day climate, this process presents as a good candidate for simplification. This may be then further investigated, for example in terms of computing time.<br>The resulting sensitivities to CMP complexity are envisioned to guide CMP model simplifications as well as steer research towards those processes where a more accurate representation proves to be necessary.</p><p> </p><p><br>Carslaw, Kenneth, Lindsay Lee, Leighton Regayre, and Jill Johnson (Feb. 2018). “Climate Models Are Uncertain, but We Can Do Something About It”. In: Eos 99. doi: 10.1029/2018EO093757</p><p>Knutti, Reto and Jan Sedláček (Apr. 2013). “Robustness and Uncertainties in the New CMIP5 Climate Model Projections”. In: Nature Climate Change 3.4, pp. 369–373. doi: 10.1038/nclimate1716</p>

scholarly journals An evaluation of clouds and radiation in a large-scale atmospheric model using a cloud vertical structure classification

2020 ◽  
Vol 13 (2) ◽  
pp. 673-684
Author(s):  
Dongmin Lee ◽  
Lazaros Oreopoulos ◽  
Nayeong Cho
Keyword(s):  
Large Scale ◽  
Vertical Structure ◽  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Atmospheric Model ◽  
Radiative Effects ◽  
Surface Cooling ◽  
Vertical Location ◽  
High Clouds

Abstract. We revisit the concept of the cloud vertical structure (CVS) classes we have previously employed to classify the planet's cloudiness (Oreopoulos et al., 2017). The CVS classification reflects simple combinations of simultaneous cloud occurrence in the three standard layers traditionally used to separate low, middle, and high clouds and was applied to a dataset derived from active lidar and cloud radar observations. This classification is now introduced in an atmospheric global climate model, specifically a version of NASA's GEOS-5, in order to evaluate the realism of its cloudiness and of the radiative effects associated with the various CVS classes. Such classes can be defined in GEOS-5 thanks to a subcolumn cloud generator paired with the model's radiative transfer algorithm, and their associated radiative effects can be evaluated against observations. We find that the model produces 50 % more clear skies than observations in relative terms and produces isolated high clouds that are slightly less frequent than in observations, but optically thicker, yielding excessive planetary and surface cooling. Low clouds are also brighter than in observations, but underestimates of the frequency of occurrence (by ∼20 % in relative terms) help restore radiative agreement with observations. Overall the model better reproduces the longwave radiative effects of the various CVS classes because cloud vertical location is substantially constrained in the CVS framework.

Aerosol Radiative Forcing and Forcing Efficiency in the UVB for Regions Affected by Saharan and Asian Mineral Dust

2009 ◽  
Vol 66 (4) ◽  
pp. 1033-1040 ◽  
Author(s):  
O. E. García ◽  
A. M. Díaz ◽  
F. J. Expósito ◽  
J. P. Díaz ◽  
A. Redondas ◽  
...  
Keyword(s):  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Radiative Forcing ◽  
Climate Model ◽  
Mineral Dust ◽  
Global Climate ◽  
Global Climate Model ◽  
Aerosol Radiative Forcing ◽  
Benchmark Database ◽  
Aerosol Radiative

Abstract The influence of mineral dust on ultraviolet energy transfer is studied for two different mineralogical origins. The aerosol radiative forcing ΔF and the forcing efficiency at the surface ΔFeff in the range 290–325 nm were estimated in ground-based stations affected by the Saharan and Asian deserts during the dusty seasons. UVB solar measurements were taken from the World Ozone and Ultraviolet Data Center (WOUDC) for four Asian stations (2000–04) and from the Santa Cruz Observatory, Canary Islands (2002–03), under Gobi and Sahara Desert influences, respectively. The Moderate Resolution Imaging Spectroradiometer (MODIS) aerosol optical depth at 550 nm was used to characterize the aerosol load τ, whereas the aerosol index provided by the Total Ozone Mapping Spectrometer (TOMS) sensor was employed to identify the mineral dust events. The ΔF is strongly affected by the aerosol load, the values found being comparable in both regions during the dusty seasons. Under those conditions, ΔF values as large as −1.29 ± 0.53 W m−2 (τ550 = 0.48 ± 0.24) and −1.43 ± 0.38 W m−2 (τ550 = 0.54 ± 0.26) were reached under Saharan and Asian dust conditions, respectively. Nevertheless, significant differences have been observed in the aerosol radiative forcing per unit of aerosol optical depth in the slant path, τS. The maximum ΔFeff values associated with dust influences were −1.55 ± 0.20 W m−2 τS550−1 for the Saharan region and −0.95 ± 0.11 W m−2 τS550−1 in the Asian area. These results may be used as a benchmark database for establishing aerosol corrections in UV satellite products or in global climate model estimations.

Physical Climate Response to a Reduction of Anthropogenic Climate Forcing

2010 ◽  
Vol 14 (7) ◽  
pp. 1-11 ◽  
Author(s):  
Arindam Samanta ◽  
Bruce T. Anderson ◽  
Sangram Ganguly ◽  
Yuri Knyazikhin ◽  
Ramakrishna R. Nemani ◽  
...  
Keyword(s):  
Radiative Forcing ◽  
Thermohaline Circulation ◽  
Climate Model ◽  
Global Climate ◽  
Ghg Emissions ◽  
Climate System ◽  
Initial Increase ◽  
Earth System ◽  
Human Welfare ◽  
Co2 Concentrations

Abstract Recent research indicates that the warming of the climate system resulting from increased greenhouse gas (GHG) emissions over the next century will persist for many centuries after the cessation of these emissions, principally because of the persistence of elevated atmospheric carbon dioxide (CO2) concentrations and their attendant radiative forcing. However, it is unknown whether the responses of other components of the climate system—including those related to Greenland and Antarctic ice cover, the Atlantic thermohaline circulation, the West African monsoon, and ecosystem and human welfare—would be reversed even if atmospheric CO2 concentrations were to recover to 1990 levels. Here, using a simple set of experiments employing a current-generation numerical climate model, the authors examine the response of the physical climate system to decreasing CO2 concentrations following an initial increase. Results indicate that many characteristics of the climate system, including global temperatures, precipitation, soil moisture, and sea ice, recover as CO2 concentrations decrease. However, other components of the Earth system may still exhibit nonlinear hysteresis. In these experiments, for instance, increases in stratospheric water vapor, which initially result from increased CO2 concentrations, remain present even as CO2 concentrations recover. These results suggest that identification of additional threshold behaviors in response to human-induced global climate change should focus on subcomponents of the full Earth system, including cryosphere, biosphere, and chemistry.

scholarly journals An Investigation of the Connections among Convection, Clouds, and Climate Sensitivity in a Global Climate Model

2014 ◽  
Vol 27 (5) ◽  
pp. 1845-1862 ◽  
Author(s):  
Ming Zhao
Keyword(s):  
Climate Sensitivity ◽  
Radiative Forcing ◽  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Convective Precipitation ◽  
Entrainment Rate ◽  
Cloud Radiative Forcing ◽  
Precipitation Efficiency ◽  
Perturbed Physics

Abstract This study explores connections between process-level modeling of convection and global climate model (GCM) simulated clouds and cloud feedback to global warming through a set of perturbed-physics and perturbed sea surface temperature experiments. A bulk diagnostic approach is constructed, and a set of variables is derived and demonstrated to be useful in understanding the simulated relationship. In particular, a novel bulk quantity, the convective precipitation efficiency or equivalently the convective detrainment efficiency, is proposed as a simple measure of the aggregated properties of parameterized convection important to the GCM simulated clouds. As the convective precipitation efficiency increases in the perturbed-physics experiments, both liquid and ice water path decrease, with low and middle cloud fractions diminishing at a faster rate than high cloud fractions. This asymmetry results in a large sensitivity of top-of-atmosphere net cloud radiative forcing to changes in convective precipitation efficiency in this limited set of models. For global warming experiments, intermodel variations in the response of cloud condensate, low cloud fraction, and total cloud radiative forcing are well explained by model variations in response to total precipitation (or detrainment) efficiency. Despite significant variability, all of the perturbed-physics models produce a sizable increase in precipitation efficiency to warming. A substantial fraction of the increase is due to its convective component, which depends on the parameterization of cumulus mixing and convective microphysical processes. The increase in convective precipitation efficiency and associated change in convective cloud height distribution owing to warming explains the increased cloud feedback and climate sensitivity in recently developed Geophysical Fluid Dynamics Laboratory GCMs. The results imply that a cumulus scheme using fractional removal of condensate for precipitation and inverse calculation of the entrainment rate tends to produce a lower climate sensitivity than a scheme using threshold removal for precipitation and the entrainment rate formulated inversely dependent on convective depth.

scholarly journals Modelling sea salt aerosol and its direct and indirect effects on climate

2007 ◽  
Vol 7 (5) ◽  
pp. 14939-14987 ◽  
Author(s):  
X. Ma ◽  
K. von Salzen ◽  
J. Li
Keyword(s):  
Radiative Forcing ◽  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Sea Salt ◽  
Size Distributions ◽  
Size Dependent ◽  
Sea Salt Aerosol ◽  
Direct Forcing ◽  
Log Normal

Abstract. A size-dependent sea salt aerosol parameterization was developed based on the piecewise log-normal approximation (PLA) for aerosol size distributions. Results of this parameterization from simulations with a global climate model produce good agreement with observations at the surface and for vertically-integrated volume size distributions. The global and annual mean of the sea salt burden is 10.1 mg m−2. The direct radiative forcing is calculated to be −1.52 and −0.60 W m−2 for clear sky and all sky, respectively. The first indirect radiative forcing is about twice as large as the direct forcing for all-sky (−1.34 W m−2). The results also show that the total indirect forcing of sea salt is −2.9 W m−2 if climatic feedbacks are taken into account. The sensitivity of the forcings to changes in the burdens and sizes of sea salt particles was also investigated based on additional simulations with a different sea salt source function.

scholarly journals Enhanced solar energy absorption by internally-mixed black carbon in snow grains

2012 ◽  
Vol 12 (1) ◽  
pp. 2057-2113 ◽  
Author(s):  
M. G. Flanner ◽  
X. Liu ◽  
C. Zhou ◽  
J. E. Penner
Keyword(s):  
Sea Ice ◽  
Black Carbon ◽  
Radiative Forcing ◽  
Climate Model ◽  
Volume Fraction ◽  
Global Climate ◽  
Global Climate Model ◽  
Absorption Enhancement ◽  
Liquid Droplets ◽  
Vapor Transfer

Abstract. Here we explore light absorption by snowpack containing black carbon (BC) particles residing within ice grains. Basic considerations of particle volumes and BC/snow mass concentrations show that there are generally 0.05–109 BC particles for each ice grain. This suggests that internal BC is likely distributed as multiple inclusions within ice grains, and thus the dynamic effective medium approximation (DEMA) (Chýlek and Srivastava, 1983) is a more appropriate optical representation for BC/ice composites than coated-sphere or standard mixing approximations. DEMA calculations show that the 460 nm absorption cross-section of BC/ice composites, normalized to the mass of BC, is typically enhanced by factors of 1.8–2.1 relative to interstitial BC. BC effective radius is the dominant cause of variation in this enhancement, compared with ice grain size and BC volume fraction. We apply two atmospheric aerosol models that simulate interstitial and within-hydrometeor BC lifecycles. Although only ~2% of the atmospheric BC burden is cloud-borne, 71–83% of the BC deposited to global snow and sea-ice surfaces occurs within hydrometeors. Key processes responsible for within-snow BC deposition are development of hydrophilic coatings on BC, activation of liquid droplets, and subsequent snow formation through riming or ice nucleation by other species and aggregation/accretion of ice particles. Applying deposition fields from these aerosol models in offline snow and sea-ice simulations, we calculate that 32–73% of BC in global surface snow resides within ice grains. This fraction is smaller than the within-hydrometeor deposition fraction because meltwater flux preferentially removes internal BC, while sublimation and freezing within snowpack expose internal BC. Incorporating the DEMA into a global climate model, we simulate increases in BC/snow radiative forcing of 43–86%, relative to scenarios that apply external optical properties to all BC. We show that snow metamorphism driven by diffusive vapor transfer likely proceeds too slowly to alter the mass of internal BC while it is radiatively active, but neglected processes like wind pumping and convection may play much larger roles. These results suggest that a large portion of BC in surface snowpack may reside within ice grains and increase BC/snow radiative forcing, although measurements to evaluate this are lacking. Finally, previous studies of BC/snow forcing that neglected this absorption enhancement are not necessarily biased low, because of application of absorption-enhancing sulfate coatings to hydrophilic BC, neglect of coincident absorption by dust in snow, and implicit treatment of cloud-borne BC resulting in longer-range transport.

Sign in / Sign up

Export Citation Format

Share Document