scholarly journals Impacts of Wildfire Aerosols on Global Energy Budget and Climate: The Role of Climate Feedbacks

2020 ◽  
Vol 33 (8) ◽  
pp. 3351-3366 ◽  
Author(s):  
Yiquan Jiang ◽  
Xiu-Qun Yang ◽  
Xiaohong Liu ◽  
Yun Qian ◽  
Kai Zhang ◽  
...  
Keyword(s):  
Heat Flux ◽  
Southern Hemisphere ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Global Climate ◽  
The Arctic ◽  
Global Ocean ◽  
Climate Feedbacks ◽  
Surface Latent Heat Flux

AbstractAerosols emitted from wildfires could significantly affect global climate through perturbing global radiation balance. In this study, the Community Earth System Model with prescribed daily fire aerosol emissions is used to investigate fire aerosols’ impacts on global climate with emphasis on the role of climate feedbacks. The total global fire aerosol radiative effect (RE) is estimated to be −0.78 ± 0.29 W m−2, which is mostly from shortwave RE due to aerosol–cloud interactions (REaci; −0.70 ± 0.20 W m−2). The associated global annual-mean surface air temperature (SAT) change ∆T is −0.64 ± 0.16 K with the largest reduction in the Arctic regions where the shortwave REaci is strong. Associated with the cooling, the Arctic sea ice is increased, which acts to reamplify the Arctic cooling through a positive ice-albedo feedback. The fast response (irrelevant to ∆T) tends to decrease surface latent heat flux into atmosphere in the tropics to balance strong atmospheric fire black carbon absorption, which reduces the precipitation in the tropical land regions (southern Africa and South America). The climate feedback processes (associated with ∆T) lead to a significant surface latent heat flux reduction over global ocean areas, which could explain most (~80%) of the global precipitation reduction. The precipitation significantly decreases in deep tropical regions (5°N) but increases in the Southern Hemisphere tropical ocean, which is associated with the southward shift of the intertropical convergence zone and the weakening of Southern Hemisphere Hadley cell. Such changes could partly compensate the interhemispheric temperature asymmetry induced by boreal forest fire aerosol indirect effects, through intensifying the cross-equator atmospheric heat transport.

scholarly journals Impacts of wildfire aerosols on global energy budget and climate: The role of climate feedbacks

2020 ◽  
Author(s):  
Yiquan Jiang ◽  
Xiu-Qun Yang ◽  
Xiaohong Liu
Keyword(s):  
Heat Flux ◽  
Southern Hemisphere ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Global Climate ◽  
The Arctic ◽  
Global Ocean ◽  
Climate Feedbacks ◽  
Surface Latent Heat Flux

<p>Aerosols emitted from wildfires could significantly affect global climate through perturbing global radiation balance. In this study, Community Earth System Model with prescribed daily fire aerosol emissions is used to investigate fire aerosols’ impacts on global climate with emphasizing the role of climate feedbacks. The total global fire aerosol radiative effect (RE) is estimated to be -0.78±0.29 W m<sup>-2</sup>, which is mostly from shortwave RE due to aerosol-cloud interactions (REaci, -0.70±0.20 W m<sup>-2</sup>). The associated global-annual mean surface air temperature (SAT) change (∆T) is -0.64±0.16K with the largest reduction in the Arctic regions where the shortwave REaci is strong. Associated with the cooling, the Arctic sea ice is increased, which acts to re-amplify the Arctic cooling through a positive ice-albedo feedback. The fast response (irrelevant to ∆T) tends to decrease surface latent heat flux into atmosphere in the tropics to balance strong atmospheric fire black carbon absorption, which reduces the precipitation in the tropical land regions (southern Africa and South America). The climate feedback processes (associated with ∆T) lead to a significant surface latent heat flux reduction over global ocean areas, which could explain most (~80%) of the global precipitation reduction. The precipitation significantly decreases in deep tropical regions (5°N), but increases in Southern Hemisphere tropical ocean, which is associated with the southward shift of the Inter-Tropical Convergence Zone and the weakening of Southern Hemisphere Hadley cell. Such changes could partly compensate the interhemispheric temperature asymmetry induced by boreal-forest fire aerosol indirect effect, through intensifying the cross-equator atmospheric heat transport.</p>

Role of surface latent heat flux in shallow cloud transitions: A mechanism-denial LES study

2021 ◽  
Author(s):  
Youtong Zheng ◽  
Haipeng Zhang ◽  
Zhanqing Li
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Liquid Water Path ◽  
Second Stage ◽  
Surface Latent Heat Flux ◽  
Cloud Regime ◽  
Capping Inversion

AbstractSurface latent heat flux (LHF) has been considered as the determinant driver of the stratocumulus-to-cumulus transition (SCT). The distinct signature of the LHF in driving the SCT, however, has not been found in observations. This motivates us to ask: how determinant is the LHF to SCT? To answer it, we conduct large-eddy simulations in a Lagrangian setup in which the sea-surface temperature increases over time to mimic a low-level cold air advection. To isolate the role of LHF, we conduct a mechanism-denial experiment in which the LHF adjustment is turned off. The simulations confirm the indispensable roles of LHF in sustaining (although not initiating) the boundary layer decoupling (first stage of SCT) and driving the cloud regime transition (second stage of SCT). However, using theoretical arguments and LES results, we show that decoupling can happen without the need for LHF to increase as long as the capping inversion is weak enough to ensure high entrainment efficiency. The high entrainment efficiency alone cannot sustain the decoupled state without the help of LHF adjustment, leading to the recoupling of the boundary layer that eventually becomes cloud-free. Interestingly, the stratocumulus sheet is sustained longer without LHF adjustment. The mechanisms underlying the findings are explained from the perspectives of cloud-layer budgets of energy (first stage) and liquid water path (second stage).

scholarly journals ANN-Based Estimation of Low-Latitude Monthly Ocean Latent Heat Flux by Ensemble Satellite and Reanalysis Products

Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4773
Author(s):  
Xiaowei Chen ◽  
Yunjun Yao ◽  
Yufu Li ◽  
Yuhu Zhang ◽  
Kun Jia ◽  
...  
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Water Cycle ◽  
Global Climate ◽  
Great Influence ◽  
Global Ocean ◽  
Relative Uncertainty ◽  
Low Latitude ◽  
Essential Variable

Ocean latent heat flux (LHF) is an essential variable for air–sea interactions, which establishes the link between energy balance, water and carbon cycle. The low-latitude ocean is the main heat source of the global ocean and has a great influence on global climate change and energy transmission. Thus, an accuracy estimation of high-resolution ocean LHF over low-latitude area is vital to the understanding of energy and water cycle, and it remains a challenge. To reduce the uncertainties of individual LHF products over low-latitude areas, four machine learning (ML) methods (Artificial Neutral Network (ANN), Random forest (RF), Bayesian Ridge regression and Random Sample Consensus (RANSAC) regression) were applied to estimate low-latitude monthly ocean LHF by using two satellite products (JOFURO-3 and GSSTF-3) and two reanalysis products (MERRA-2 and ERA-I). We validated the estimated ocean LHF using 115 widely distributed buoy sites from three buoy site arrays (TAO, PIRATA and RAMA). The validation results demonstrate that the performance of LHF estimations derived from the ML methods (including ANN, RF, BR and RANSAC) were significantly better than individual LHF products, indicated by R2 increasing by 3.7–46.4%. Among them, the LHF estimation using the ANN method increased the R2 of the four-individual ocean LHF products (ranging from 0.56 to 0.79) to 0.88 and decreased the RMSE (ranging from 19.1 to 37.5) to 11 W m−2. Compared to three other ML methods (RF, BR and RANSAC), ANN method exhibited the best performance according to the validation results. The results of relative uncertainty analysis using the triangle cornered hat (TCH) method show that the ensemble LHF product using ML methods has lower relative uncertainty than individual LHF product in most area. The ANN was employed to implement the mapping of annual average ocean LHF over low-latitude at a spatial resolution of 0.25° during 2003–2007. The ocean LHF fusion products estimated from ANN methods were 10–30 W m−2 lower than those of the four original ocean products (MERRA-2, JOFURO-3, ERA-I and GSSTF-3) and were more similar to observations.

scholarly journals Numerical simulation of extreme snow melt observed at the SIGMA-A site, northwest Greenland, during summer 2012

2015 ◽  
Vol 9 (1) ◽  
pp. 495-539
Author(s):  
M. Niwano ◽  
T. Aoki ◽  
S. Matoba ◽  
S. Yamaguchi ◽  
T. Tanikawa ◽  
...  
Keyword(s):  
Heat Flux ◽  
Grain Size ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
In Situ Measurements ◽  
The Arctic ◽  
Snow Surface ◽  
Near Surface ◽  
Surface Snow

Abstract. The surface energy balance (SEB) from 30 June to 14 July 2012 at site SIGMA (Snow Impurity and Glacial Microbe effects on abrupt warming in the Arctic)-A, (78°03' N, 67°38' W; 1490 m a.s.l.) on the northwest Greenland Ice Sheet (GrIS) was investigated by using in situ atmospheric and snow measurements, as well as numerical modeling with a one-dimensional, multi-layered, physical snowpack model called SMAP (Snow Metamorphism and Albedo Process). At SIGMA-A, remarkable near-surface snowmelt and continuous heavy rainfall (accumulated precipitation between 10 and 14 July was estimated to be 100 mm) were observed after 10 July 2012. Application of the SMAP model to the GrIS snowpack was evaluated based on the snow temperature profile, snow surface temperature, surface snow grain size, and shortwave albedo, all of which the model simulated reasonably well. However, comparison of the SMAP-calculated surface snow grain size with in situ measurements during the period when surface hoar with small grain size was observed on-site revealed that it was necessary to input air temperature, relative humidity, and wind speed data from two heights to simulate the latent heat flux into the snow surface and subsequent surface hoar formation. The calculated latent heat flux was always directed away from the surface if data from only one height were input to the SMAP model, even if the value for roughness length of momentum was perturbed between the possible maximum and minimum values in numerical sensitivity tests. This result highlights the need to use two-level atmospheric profiles to obtain realistic latent heat flux. Using such profiles, we calculated the SEB at SIGMA-A from 30 June to 14 July 2012. Radiation-related fluxes were obtained from in situ measurements, whereas other fluxes were calculated with the SMAP model. By examining the components of the SEB, we determined that low-level clouds accompanied by a significant temperature increase played an important role in the melt event observed at SIGMA-A. These conditions induced a remarkable surface heating via cloud radiative forcing in the polar region.

scholarly journals The Role of Latent Heat Flux in Tropical Cyclogenesis over the Western North Pacific: Comparison of Developing versus Non-Developing Disturbances

2019 ◽  
Vol 7 (2) ◽  
pp. 28 ◽  
Author(s):  
Si Gao ◽  
Shengbin Jia ◽  
Yanyu Wan ◽  
Tim Li ◽  
Shunan Zhai ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
North Pacific ◽  
Western North Pacific ◽  
Specific Humidity ◽  
Near Surface ◽  
Tangential Wind

The possible role of air–sea latent heat flux (LHF) in tropical cyclone (TC) genesis over the western North Pacific (WNP) is investigated using state-of-the-art satellite and analysis datasets. The authors conducted composite analyses of several meteorological variables after identifying developing and non-developing tropical disturbances from June to October of the period 2000 to 2009. Compared to the non-developing disturbances, increased LHF underlying the developing disturbances enhances boundary–layer specific humidity. The secondary circulation then transports more boundary–layer moisture inward and upward and, thus, induces a stronger moist core in the middle troposphere. Accordingly, the air in the core region ascends following a warmer moist adiabat than that in the environment and results in a stronger upper-level warm core, which is associated with a stronger near-surface tangential wind based on the thermal wind balance. This enlarges the magnitude and negative radial gradient of LHF and, thereby, further increases boundary–layer specific humidity. A tropical depression forms when the near-surface tangential wind increases to a certain extent as a result of the continuing positive feedback between near-surface wind and LHF. The results suggest an important role of wind-driven LHF in TC genesis over the WNP.

How surface latent heat flux is related to lower-tropospheric stability in southern subtropica marine stratus and stratocumulus regions

2009 ◽  
Vol 1 (3) ◽  
Author(s):  
Yanping He
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Radiation Flux ◽  
Surface Wind ◽  
Surface Radiation ◽  
Near Surface ◽  
Marine Stratus ◽  
Surface Latent Heat Flux ◽  
Lower Tropospheric Stability

AbstractThe relationship between surface latent heat flux and the lower-tropospheric stability (LTS) is examined using ERA-40 reanalysis, NCEP reanalysis and COADS (Comprehensive Ocean-Atmosphere Data Set) ship data in two southern subtropical marine stratus and stratocumulus regions. The change of surface latent heat flux with LTS is determined by a comparison of the correlation of LTS with surface wind speed and with near surface humidity difference. At intermediate LTS (10 K-15 K), both surface evaporation and downward surface radiation flux amplify small LTS perturbations due to the surface wind-LTS relationship and cloud-radiation feedback. At high LTS, surface latent heat flux exceeds its peak value and becomes a regulating mechanism to keep LTS at its commonly observed equilibrium value. Surface radiation flux is seen to decrease at a smaller rate with LTS than surface latent heat flux. By applying the regulating effect of LTS on near surface humidity differences, monthly surface latent heat flux can be better represented.

scholarly journals Brief Communication: An exclusive example of surface latent heat flux variation before Russia M6.1 earthquake

2014 ◽  
Vol 2 (1) ◽  
pp. 347-359
Author(s):  
Y. Jie ◽  
G. Guangmeng
Keyword(s):  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Satellite Image ◽  
High Temporal Resolution ◽  
Flux Variation ◽  
Daily Data ◽  
Surface Latent Heat Flux ◽  
First Time ◽  
Very High

Abstract. Recently surface latent heat flux (SLHF) data is widely used to study the anomalies before earthquakes. Most researches use the daily SLHF data, here we use both daily data and high temporal resolution (four times one day) SLHF data, and compare the SLHF change with satellite image at the first time. We check the data from 1 September to 30 October 2011 and the result shows that there is really a very high SLHF anomaly (bigger than 2 σ) just 5 days before the M6.1 Russia earthquake which occurred on 14 October 2011. It should be considered as a preseismic precursor if judged with previously published methods. But our comparison between SLHF change and satellite image shows that the SLHF anomaly is just caused by a thick cloud. This result tells us that scientists must know the data's meaning before they use it, if not, they may get a wrong conclusion. Based on this example, we suggest that previously published SLHF anomaly before earthquake should be reanalyzed by our method to exclude the false anomaly.

Sign in / Sign up

Export Citation Format

Share Document